|
a4b75dcf
|
2013-05-06T21:51:25
|
|
repo: unconditionally create a global config backend
When a repository is initialised, we need to probe to see if there is
a global config to load. If this is not the case, the user isn't able
to write to the global config without creating the backend and adding
it themselves, which is inconvenient and overly complex.
Unconditionally create and add a backend for the global config file
regardless of whether it exists as a convenience for users.
To enable this, we allow creating backends to files that do not exist
yet, changing the semantics somewhat, and making some tests invalid.
|
|
5540d947
|
2013-03-15T16:39:00
|
|
Implement global/system file search paths
The goal of this work is to expose the search logic for "global",
"system", and "xdg" files through the git_libgit2_opts() interface.
Behind the scenes, I changed the logic for finding files to have a
notion of a git_strarray that represents a search path and to store
a separate search path for each of the three tiers of config file.
For each tier, I implemented a function to initialize it to default
values (generally based on environment variables), and then general
interfaces to get it, set it, reset it, and prepend new directories
to it.
Next, I exposed these interfaces through the git_libgit2_opts
interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants
for the user to control which search path they were modifying.
There are alternative designs for the opts interface / argument
ordering, so I'm putting this phase out for discussion.
Additionally, I ended up doing a little bit of clean up regarding
attr.h and attr_file.h, adding a new attrcache.h so the other two
files wouldn't have to be included in so many places.
|
|
359fc2d2
|
2013-01-08T17:07:25
|
|
update copyrights
|
|
54b2a37a
|
2012-11-20T16:02:25
|
|
Clean up config.h
|
|
d36451c9
|
2012-11-17T12:34:15
|
|
config: Make git_config_file__ondisk() internal
|
|
|
aba70781
|
2012-09-11T18:11:26
|
|
config: introduce git_config_rename_section()
|
|
a1abe66a
|
2012-09-10T12:11:02
|
|
Add config level support in the config API
Added `struct git_config_entry`: a git_config_entry contains the key, the value, and the config file level from which a config element was found.
Added `git_config_open_level`: build a single-level focused config object from a multi-level one.
We are now storing `git_config_entry`s in the khash of the config_file
|
|
4258d483
|
2012-10-02T17:21:07
|
|
Rename xdr to xdg
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
19aa8416
|
2012-09-29T21:26:32
|
|
Silence MinGW warnings
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
7fbca880
|
2012-08-24T14:32:45
|
|
Support new config locations
As of git v1.7.12, $HOME/.config/git/ is supported as a new
location for "config", "attributes", and "ignore" files.
|
|
|
95dfb031
|
2012-03-30T14:40:50
|
|
Improve config handling for diff,submodules,attrs
This adds support for a bunch of core.* settings that affect
diff and status, plus fixes up some incorrect implementations
of those settings from before. Also, this cleans up the
handling of config settings in the new submodules code and
in the old attrs/ignore code.
|
|
bfc9ca59
|
2012-03-28T16:45:36
|
|
Added submodule API and use in status
When processing status for a newly checked out repo, it is
possible that there will be submodules that have not yet been
initialized. The only way to distinguish these from untracked
directories is to have some knowledge of submodules. This
commit adds a new submodule API which, given a name or path,
can determine if it appears to be a submodule and can give
information about the submodule.
|
|
5e0de328
|
2012-02-13T17:10:24
|
|
Update Copyright header
Signed-off-by: schu <schu-github@schulog.org>
|
|
|
73b51450
|
2011-12-28T23:28:50
|
|
Add support for macros and cache flush API.
Add support for git attribute macro definitions. Also, add
support for cache flush API to clear the attribute file content
cache when needed.
Additionally, improved the handling of global and system files,
making common utility functions in fileops and converting config
and attr to both use the common functions.
Adds a bunch more tests and fixed some memory leaks. Note that
adding macros required me to use refcounted attribute assignment
definitions, which complicated, but probably improved memory usage.
|
|
|
97769280
|
2011-11-30T11:27:15
|
|
Use git_buf for path storage instead of stack-based buffers
This converts virtually all of the places that allocate GIT_PATH_MAX
buffers on the stack for manipulating paths to use git_buf objects
instead. The patch is pretty careful not to touch the public API
for libgit2, so there are a few places that still use GIT_PATH_MAX.
This extends and changes some details of the git_buf implementation
to add a couple of extra functions and to make error handling easier.
This includes serious alterations to all the path.c functions, and
several of the fileops.c ones, too. Also, there are a number of new
functions that parallel existing ones except that use a git_buf
instead of a stack-based buffer (such as git_config_find_global_r
that exists alongsize git_config_find_global).
This also modifies the win32 version of p_realpath to allocate whatever
buffer size is needed to accommodate the realpath instead of hardcoding
a GIT_PATH_MAX limit, but that change needs to be tested still.
|
|
9462c471
|
2011-11-25T08:16:26
|
|
repository: Change ownership semantics
The ownership semantics have been changed all over the library to be
consistent. There are no more "borrowed" or duplicated references.
Main changes:
- `git_repository_open2` and `3` have been dropped.
- Added setters and getters to hotswap all the repository owned
objects:
`git_repository_index`
`git_repository_set_index`
`git_repository_odb`
`git_repository_set_odb`
`git_repository_config`
`git_repository_set_config`
`git_repository_workdir`
`git_repository_set_workdir`
Now working directories/index files/ODBs and so on can be
hot-swapped after creating a repository and between operations.
- All these objects now have proper ownership semantics with
refcounting: they all require freeing after they are no longer
needed (the repository always keeps its internal reference).
- Repository open and initialization has been updated to keep in
mind the configuration files. Bare repositories are now always
detected, and a default config file is created on init.
- All the tests affected by these changes have been dropped from the
old test suite and ported to the new one.
|
|
01ad7b3a
|
2011-09-06T15:48:45
|
|
*: correct and codify various file permissions
The following files now have 0444 permissions:
- loose objects
- pack indexes
- pack files
- packs downloaded by fetch
- packs downloaded by the HTTP transport
And the following files now have 0666 permissions:
- config files
- repository indexes
- reflogs
- refs
This brings libgit2 more in line with Git.
Note that git_filebuf_commit() and git_filebuf_commit_at() have both
gained a new mode parameter.
The latter change fixes an important issue where filebufs created with
GIT_FILEBUF_TEMPORARY received 0600 permissions (due to mkstemp(3)
usage). Now we chmod() the file before renaming it into place.
Tests have been added to confirm that new commit, tag, and tree
objects are created with the right permissions. I don't have access to
Windows, so for now I've guarded the tests with "#ifndef GIT_WIN32".
|
|
|
bb742ede
|
2011-09-19T01:54:32
|
|
Cleanup legal data
1. The license header is technically not valid if it doesn't have a
copyright signature.
2. The COPYING file has been updated with the different licenses used in
the project.
3. The full GPLv2 header in each file annoys me.
|
|
44daec42
|
2011-08-03T22:03:57
|
|
Bind the configuration and remotes to a repository
Configurations when taken from a repository and remotes should be
identifiable as coming from a particular repository. This allows us to
reduce the amount of variables that the user has to keep track of.
Signed-off-by: Carlos Martín Nieto <carlos@cmartin.tk>
|
|
|
b22d1479
|
2011-06-16T17:46:06
|
|
Add git_repository_config API
This function puts the global and repository configurations in one
git_config object and gives it to the user.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
b0b527e0
|
2011-05-20T03:20:12
|
|
config: Cleanup & renaming of the external API
"git_config_backend" have been renamed to "git_config_file", which
implements a generic interface to access a configuration file -- be it
either on disk, from a DB or whatever mumbojumbo.
I think this makes more sense.
|
|
|
8adbf2ed
|
2011-05-20T02:58:33
|
|
Rewrite `git_config_open_global`
We have a lot of utility methods that make path building trivial. Use
them!
|
|
|
0da2c700
|
2011-05-17T15:09:30
|
|
utils: Move git__str[n]tolower
|
|
c0335005
|
2011-05-06T12:42:47
|
|
Move config to a backend structure
Configuration options can come from different sources. Currently,
there is only support for reading them from a flat file, but it might
make sense to read it from a database at some point.
Move the parsing code into src/config_file.c and create an include
file include/git2/config_backend.h to allow for other backends to be
developed.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
094aaaae
|
2011-05-05T15:16:15
|
|
config: store the section name separately
The section and variable names use different rules, so store them as
two different variables internally.
This will simplify the configuration-writing code as well later on,
but even with parsing, the code is simpler.
Take this opportunity to add a variable to the list directly when
parsing instead of passing through config_set.
|
|
|
6b45cb8a
|
2011-04-06T18:27:31
|
|
config: use and implement list macros
Use list macros instead of manually changing the head and/or tail of
the variable list.
|
|
|
acab3bc4
|
2011-04-06T15:31:42
|
|
config: move str(n)tolower to the git__ namespace
Non-static functions in a library should always have a prefix
namespace.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
923fe455
|
2011-03-30T16:02:57
|
|
Add strtolower and strntolower functions
As parts of variable names are case-sensitive, we need these functions.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
dadc0158
|
2011-03-30T15:05:15
|
|
config: use a singly-linked list instead of a hash table
Such a list preserves the order the variables were first read in which
will be useful later for merging different data-sets. Furthermore,
reading and writing out the same configuration should not reorganize
the variables, which could happen when iterating through all the items
in a hash table.
A hash table is overkill for this small a data-set anyway.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
e21881d1
|
2011-03-30T15:16:25
|
|
git_config: reorder fields according to use
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
2974aa94
|
2011-03-30T11:30:40
|
|
Determine variable type at runtime
Config variables should be interpreted at run-time, as we don't know if a
zero means false or zero, or if yes means true or "yes".
As a variable has no intrinsic type, git_cvtype is gone and the public
API takes care of enforcing a few rules.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
6d7bb4e0
|
2011-03-29T17:35:02
|
|
Move git_cvar_type to include/git2/config.h
Include it in src/config.h and fix the header name #define.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
238df559
|
2011-03-29T12:29:21
|
|
Rename git_config_{type,var} to git_cvar{_type,}
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|
|
|
5d4cd003
|
2011-03-28T17:02:45
|
|
Move the struct declaration outside config.c
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
|