kmx git

Commit	Date	Message
59ffb512	2017-11-24T10:37:09	Merge pull request #4298 from tiennou/gather-reflog-messages-tests Gather the reflog entry content tests
da635eda	2017-11-22T23:47:29	tests: move free functions at the end
ebe5d8ec	2017-07-21T20:12:01	tests: move static method to the top
f01a8587	2017-07-21T17:45:44	tests: make reflog_check_entry more clar-y
b9b1f9f8	2017-07-14T03:21:02	tests: clarify which steps corresponds to each checks
53672128	2017-07-21T17:35:30	tests: gather the reflog entry content tests
19f37f97	2017-11-13T13:16:28	add test status codes legend to the 'Started' test trace motivation: (for someone new to the tests) it's puzzling to find the odd 'S' interspersed in the test output proposed alternative test output (extract): $ cmake --build . && ./libgit2_clar -srepo -v ... Loaded 340 suites: Started (test status codes: OK='.' FAILURE='F' SKIPPED='S') repo::config... repo::discover.......... repo::env. repo::getters... repo::hashfile.. repo::head...................... repo::headtree.... repo::init.........................S repo::message.. repo::new.. repo::open............. repo::pathspec.......... repo::reservedname..... repo::setters..... repo::shallow.... repo::state.............
15f8d9a2	2017-11-13T11:44:30	Merge pull request #4412 from cpoerschke/master-tests-repo-init-tweak s/Init/Index comment tweak for test_repo_init__init_with_initial_commit
732c0b6d	2017-11-12T15:17:31	s/Init/Index comment tweak for test_repo_init__init_with_initial_commit
fd1492e8	2017-11-12T15:34:42	Merge pull request #4408 from hkleynhans/pos_neg_zero_offset_sig signature: distinguish +0000 and -0000 UTC offsets
f063dafb	2017-11-12T10:56:50	signature: distinguish +0000 and -0000 UTC offsets Git considers '-0000' a valid offset for signature lines. They need to be treated as _not_ equal to a '+0000' signature offset. Parsing a signature line stores the offset in a signed integer which does not distinguish between `+0` and `-0`. This patch adds an additional flag `sign` to the `git_time` in the `signature` object which is populated with the sign of the offset. In addition to exposing this information to the user, this information is also used to compare signatures. /cc @pks-t @ethomson
32758631	2017-11-11T15:38:27	clar: verify command line arguments before execute When executing `libgit2_clar -smerge -invalid_option`, it will first execute the merge test suite and afterwards output help because of the invalid option. With this changa, it verifies all options before execute. If there are any invalid options, it will output help and exit without actually executing the test suites.
0393ecc6	2017-11-11T13:29:27	Merge pull request #4308 from pks-t/pks/header-state-machine patch_parse: implement state machine for parsing patch headers
88450c1c	2017-11-09T21:49:30	Merge pull request #4283 from tiennou/generic-tls CMake: make HTTPS support more generic
8233f6e3	2017-11-04T23:34:14	Merge pull request #4386 from novalis/gitignore-ignore-space ignore spaces in .gitignore files
42627933	2017-11-04T18:03:26	Merge remote-tracking branch 'upstream/master' into pks/conditional-includes
c44b9170	2017-10-31T09:52:33	tests: resolve the real path for the sandbox in includeIf tests We put our repository in the temporary directory which makes macOS map the path into a virtual path. `realpath(3)` can resolve it and we do so during repository opening, but that makes its path have a different prefix from the sandbox path clar thinks we have. Resolve the sandbox path before putting it into the test config files so the paths match as expected.
bb8bc4b8	2017-10-30T06:21:55	config: add failing test for preserving case when writing keys While most parts of a configuration key are case-insensitive, we should still be case-preserving and write down whatever string the caller provided.
5cb6a2c9	2017-10-29T12:28:43	Ignore trailing whitespace in .gitignore files (as git itself does)
9980be03	2017-09-06T22:13:58	cmake: Add USE_HTTPS as a CMake option It defaults to ON, e.g. "pick whatever default is appropriate for the platform". It accepts one of SecureTransport, OpenSSL, WinHTTP, or OFF. It errors if the backend library couldn't be found.
d3ef11e0	2017-03-19T03:31:41	clar: exit immediately on initialization failure
e9369856	2017-03-21T00:25:15	stream: Gather streams to src/streams
08c1b8fc	2017-08-28T21:24:13	cmake: simplify some HTTPS tests
4da74c83	2017-10-20T07:29:17	cmake: use project-relative binary and source directories Due to our split of CMake files into multiple modules, we had to replace some uses of the `${CMAKE_CURRENT_SOURCE_DIR}` and `${CMAKE_CURRENT_BINARY_DIR}` variables and replace them with `${CMAKE_SOURCE_DIR}` and `${CMAKE_BINARY_DIR}`. This enabled us to still be able to refer to top-level files when defining build instructions inside of a subdirectory. When replacing all variables, it was assumed that the absolute set of variables is always relative to the current project. But in fact, this is not the case, as these variables always point to the source and binary directory as given by the top-levl project. So the change actually broke the ability to include libgit2 directly as a subproject, as source files cannot be found anymore. Fix this by instead using project-specific source and binary directories with `${libgit2_SOURCE_DIR}` and `${libgit2_BINARY_DIR}`.
f7d837c8	2017-05-24T12:12:29	config_file: implement "gitdir/i" conditional Next to the "gitdir" conditional for including other configuration files, there's also a "gitdir/i" conditional. In contrast to the former one, path matching with "gitdir/i" is done case-insensitively. This commit implements the case-insensitive condition.
071b6c06	2017-05-24T11:13:36	config_file: implement conditional "gitdir" includes Upstream git.git has implemented the ability to include other configuration files based on conditions. Right now, this only includes the ability to include a file based on the gitdir-location of the repository the currently parsed configuration file belongs to. This commit implements handling these conditional includes for the case-sensitive "gitdir" condition.
529e873c	2017-05-23T11:51:00	config: pass repository when opening config files Our current configuration logic is completely oblivious of any repository, but only cares for actual file paths. Unfortunately, we are forced to break this assumption by the introduction of conditional includes, which are evaluated in the context of a repository. Right now, only one conditional exists with "gitdir:" -- it will only include the configuration if the current repository's git directory matches the value passed to "gitdir:". To support these conditionals, we have to break our API and make the repository available when opening a configuration file. This commit extends the `open` call of configuration backends to include another repository and adjusts existing code to have it available. This includes the user-visible functions `git_config_add_file_ondisk` and `git_config_add_backend`.
09c15a7f	2017-10-09T09:08:19	tests: checkout::tree: check that the status list catches mode changes While we verify that we have no mode changes after calling `git_checkout_tree`, we do not verify that the `p_chmod` calls actually resulted in a changed entry. While we should assume that this works due to separate tests for the status list, we should test for the change being listed to avoid programming errors in the test.
880dfc50	2017-10-09T09:06:24	tests: checkout::tree: extract check for status entrycount There are multiple locations where we have the same code to check whether the count of status list entries of a repository matches an expected number. Extract that into a common function.
38e769cb	2017-10-09T09:00:29	Merge pull request #4369 from libgit2/ethomson/checkout_typechange Checkout typechange-only deltas
19e8faba	2016-06-15T01:59:56	checkout: test force checkout when mode changes Test that we can successfully force checkout a target when the file contents are identical, but the mode has changed.
b112b1e9	2017-10-06T11:24:11	refs: do not use peeled OID if peeling to a tag If a reference stored in a packed-refs file does not directly point to a commit, tree or blob, the packed-refs file will also will include a fully-peeled OID pointing to the first underlying object of that type. If we try to peel a reference to an object, we will use that peeled OID to speed up resolving the object. As a reference for an annotated tag does not directly point to a commit, tree or blob but instead to the tag object, the packed-refs file will have an accomodating fully-peeled OID pointing to the object referenced by that tag. When we use the fully-peeled OID pointing to the referenced object when peeling, we obviously cannot peel that to the tag anymore. Fix this issue by not using the fully-peeled OID whenever we want to peel to a tag. Note that this does not include the case where we want to resolve to _any_ object type. Existing code may make use from the fact that we resolve those to commit objects instead of tag objects, even though that behaviour is inconsistent between packed and loose references. Furthermore, some tests of ours make the assumption that we in fact resolve those references to a commit.
d8d2f21e	2017-09-06T07:52:12	cmake: unify version check for target include directories There are two locations where we check whether CMake supports `TARGET_INCLUDE_DIRECTORIES`. While the first one uses `VERSION_LESS 2.8.12`, the second one uses `VERSION_GREATER 2.8.11`, which are obviously equivalent to each other. It'd still be easier to grep for specific CMake versions being required for some features if both used the same conditional mentioning the actual target version required. So this commit refactors these conditions to make them equal.
1d9dd882	2017-09-05T15:06:29	cmake: distinguish libgit2 objects and sources Distinguish variables keeping track of our internal libgit2 sources and the final objects which shall be linked into the library. This will ease the transition to use object libraries for our bundled dependencies instead of linking them in.
cc4c44a9	2017-09-01T09:37:05	patch_parse: fix parsing patches only containing exact renames Patches which contain exact renames only will not contain an actual diff body, but only a list of files that were renamed. Thus, the patch header is immediately followed by the terminating sequence "-- ". We currently do not recognize this character sequence as a possible terminating sequence. Add it and create a test to catch the failure.
583e4141	2017-08-30T14:35:57	tests: deterministically generate test suite definitions The script "generate.py" is used to parse all test source files for unit tests. These are then written into a "clar.suite" file, which can be included by the main test executable to make available all test suites and unit tests. Our current algorithm simply collects all test suites inside of a dict, iterates through its items and dumps them in a special format into the file. As the order is not guaranteed to be deterministic for Python dictionaries, this may result in arbitrarily ordered C structs. This obviously defeats the purpose of reproducible builds, where the same input should always result in the exact same output. Fix this issue by sorting the test suites by name previous to dumping them as structs. This enables reproducible builds for the libgit2_clar file.
3c216453	2017-08-25T21:06:46	Merge pull request #4296 from pks-t/pks/pattern-based-gitignore Fix negative ignore rules with patterns
477b3e04	2017-07-10T12:25:43	submodule: refuse lookup in bare repositories While it is technically possible to look up submodules inside of a bare repository by reading the submodule configuration of a specific commit, we do not offer this functionality right now. As such, calling both `git_submodule_lookup` and `git_submodule_foreach` should error out early when these functions encounter a bare repository. While `git_submodule_lookup` already does return an error due to not being able to parse the configuration, `git_submodule_foreach` simply returns success and never invokes the callback function. Fix the issue by having both functions check whether the repository is bare and returning an error in that case.
a889c05f	2017-07-10T11:55:33	tests: submodule: add explicit cleanup function in lookup tests
64d1e0b3	2017-07-10T11:52:08	tests: submodule: fix declaration of test The testcase "submodule::lookup::cached" was declared with a single underscore separating the test suide and test name, only. As the clar parser only catches tests with two underscores, it was never executed. Add in the second underscore to actually have it detected and executed.
2d9ff8f5	2017-07-10T09:36:19	ignore: honor case insensitivity for negative ignores When computing negative ignores, we throw away any rule which does not undo a previous rule to optimize. But on case insensitive file systems, we need to keep in mind that a negative ignore can also undo a previous rule with different case, which we did not yet honor while determining whether a rule undoes a previous one. So in the following example, we fail to unignore the "/Case" directory: /case !/Case Make both paths checking whether a plain- or wildcard-based rule undo a previous rule aware of case-insensitivity. This fixes the described issue.
38b44c3b	2017-07-07T17:10:57	tests: status: additional test for negative ignores with pattern This test is by Carlos Martín Nieto.
b8922fc8	2017-07-07T13:27:27	ignore: keep negative rules containing wildcards Ignore rules allow for reverting a previously ignored rule by prefixing it with an exclamation mark. As such, a negative rule can only override previously ignored files. While computing all ignore patterns, we try to use this fact to optimize away some negative rules which do not override any previous patterns, as they won't change the outcome anyway. In some cases, though, this optimization causes us to get the actual ignores wrong for some files. This may happen whenever the pattern contains a wildcard, as we are unable to reason about whether a pattern overrides a previous pattern in a sane way. This happens for example in the case where a gitignore file contains ".c" and "!src/.c", where we wouldn't un-ignore files inside of the "src/" subdirectory. In this case, the first solution coming to mind may be to just strip the "src/" prefix and simply compare the basenames. While that would work here, it would stop working as soon as the basename pattern itself is different, like for example with "x.c" and "!src/.c. As such, we settle for the easier fix of just not optimizing away rules that contain a wildcard.
8e31cc25	2017-06-28T12:51:14	cmake: keep track of libraries and includes via lists Later on, we will move detection of required libraries, library directories as well as include directories into a separate CMakeLists.txt file inside of the source directory. Obviously, we want to avoid duplication here regarding these parameters. To prepare for the split, put the parameters into three variables LIBGIT2_LIBS, LIBGIT2_LIBDIRS and LIBGIT2_INCLUDES, tracking the required libraries, linking directory as well as include directories. These variables can later be exported into the parent scope from inside of the source build instructions, making them readily available for the other subdirectories.
a390a846	2017-07-01T13:06:00	cmake: move defines into "features.h" header In a future commit, we will split out the build instructions for our library directory and move them into a subdirectory. One of the benefits is fixing scoping issues, where e.g. defines do not leak to build targets where they do not belong to. But unfortunately, this does also pose the problem of how to propagate some defines which are required by both the library and the test suite. One way would be to create another variable keeping track of all added defines and declare it inside of the parent scope. While this is the most obvious and simplest way of going ahead, it is kind of unfortunate. The main reason to not use this is that these defines become implicit dependencies between the build targets. By simply observing a define inside of the CMakeLists.txt file, one cannot reason whether this define is only required by the current target or whether it is required by different targets, as well. Another approach would be to use an internal header file keeping track of all defines shared between targets. While configuring the library, we will set various variables and let CMake configure the file, adding or removing defines based on what has been configured. Like this, one can easily keep track of the current environment by simply inspecting the header file. Furthermore, these dependencies are becoming clear inside the CMakeLists.txt, as instead of simply adding a define, we now call e.g. `SET(GIT_THREADSAFE 1)`. Having this header file though requires us to make sure it is always included before any "#ifdef"-preprocessor checks are executed. As we have already refactored code to always include the "common.h" header file before any statement inside of a file, this becomes easy: just make sure "common.h" includes the new "features.h" header file first.
35087f0e	2017-06-28T15:42:54	cmake: create separate CMakeLists.txt for tests Our CMakeLists.txt is very unwieldy in its current size, spanning more than 700 lines of code. Furthermore, it has several issues regarding scoping, where for example some defines, includes, etc. from our test suite are also applied to our normal library code. To fix this, we can separate out build instructions for our tests and move them into their own CMakeLists.txt in the "tests" directory. This reduced complexity of the root CMakeLists.txt file and fixes the issues regarding leaking build context from tests into the library.
3267115f	2017-06-28T15:41:15	cmake: create own precompiled headers for tests As soon as we split up our CMakeBuild.txt build instructions, we will be unable to simply link against the git2 library's precompiled header from other targets. To avoid this future breakage, create a new precompiled header for our test suite. Next to being compatible with the split, this enables us to also include additional files like the clar headers, which may help speeding up compilation of the test suite.
fb585d01	2017-07-31T00:58:58	Merge branch '4233'
c0558c62	2017-07-28T09:01:41	tests: rebase::submodule: verify initialization method calls Some return codes for functions which may fail are not being checked in `test_rebase_submodule__initialize`. This may lead us to not notice errors when initializing the environment and would possibly result in either memory corruption or segfaults as soon as any of the initialization steps fails. Fix this by wrapping these function calls into `cl_git_pass`.
4f4bc573	2017-07-27T23:05:53	Merge pull request #4275 from tiennou/fix-rebase-submodule-test tests: rewrite rebase-submodule .gitmodule file
35cb7b84	2017-07-20T21:00:15	tests: fix the rebase-submodule test
45994fdc	2017-06-21T14:57:30	Remove invalid submodule Fixes #4274
e0568621	2017-07-19T13:55:55	Merge pull request #4250 from pks-t/pks/config-file-iteration Configuration file fixes with includes
a94a5402	2017-07-19T13:28:32	Merge pull request #4272 from pks-t/pks/patch-id Patch ID calculation
1b329089	2017-05-31T22:27:19	config_file: refuse modifying included variables Modifying variables pulled in by an included file currently succeeds, but it doesn't actually do what one would expect, as refreshing the configuration will cause the values to reappear. As we are currently not really able to support this use case, we will instead just return an error for deleting and setting variables which were included via an include.
28c2cc3d	2017-05-31T16:41:44	config_file: move reader into `config_read` only Right now, we have multiple call sites which initialize a `reader` structure. As the structure is only actually used inside of `config_read`, we can instead just move the reader inside of the `config_read` function. Instead, we can just pass in the configuration file into `config_read`, which eases code readability.
83bcd3a1	2017-05-31T22:45:25	config_file: refresh all files if includes were modified Currently, we only re-parse the top-level configuration file when it has changed itself. This can cause problems when an include is changed, as we were not updating all values correctly. Instead of conditionally reparsing only refreshed files, the logic becomes much clearer and easier to follow if we always re-parse the top-level configuration file when either the file itself or one of its included configuration files has changed on disk. This commit implements this logic. Note that this might impact performance in some cases, as we need to re-read all configuration files whenever any of the included files changed. It could increase performance to just re-parse include files which have actually changed, but this would compromise maintainability of the code without much gain. The only case where we will gain anything is when we actually use includes and when only these includes are updated, which will probably be quite an unusual scenario to actually be worthwhile to optimize.
6f7aab0c	2017-06-06T09:45:11	tests: config::include: use init and cleanup functions
1f7af277	2017-07-05T11:52:47	tests: config: fix missing declaration causing error On systems where we pull in our distributed version of the regex library, all tests in config::readonly fail. This error is actually quite interesting: the test suite is unable to find the declaration of `git_path_exists` and assumes it has a signature of `int git_path_exists(const char *)`. But actually, it has a `bool` return value. Due to this confusion, some wrong conversion is done by the compiler and the `cl_assert(!git_path_exists("file"))` checks erroneously fail, even when the function does in fact return the correct value. The error is actually introduced by 56893bb9a (cmake: consistently use TARGET_INCLUDE_DIRECTORIES if available, 2017-06-28), unfortunately introduced by myself. Due to the delayed addition of include directories, we will now find the "config.h" header inside of the "deps/regex" directory instead of inside the "src/" directory, where it should be. As such, we are missing definitions for the `git_config_file__ondisk` and `git_path_exists` symbols. The correct fix here would be to fix the order in which include search directories are added. But due to the current restructuring of CMakeBuild.txt, I'm refraining from doing so and delay the proper fix a bit. Instead, we paper over the issue by explicitly including "path.h" to fix its prototype. This ignores the issue that `git_config_file__ondisk` is undeclared, as its signature is correctly identified by the compiler.
89a34828	2017-06-16T13:34:43	diff: implement function to calculate patch ID The upstream git project provides the ability to calculate a so-called patch ID. Quoting from git-patch-id(1): A "patch ID" is nothing but a sum of SHA-1 of the file diffs associated with a patch, with whitespace and line numbers ignored." Patch IDs can be used to identify two patches which are probably the same thing, e.g. when a patch has been cherry-picked to another branch. This commit implements a new function `git_diff_patchid`, which gets a patch and derives an OID from the diff. Note the different terminology here: a patch in libgit2 are the differences in a single file and a diff can contain multiple patches for different files. The implementation matches the upstream implementation and should derive the same OID for the same diff. In fact, some code has been directly derived from the upstream implementation. The upstream implementation has two different modes to calculate patch IDs, which is the stable and unstable mode. The old way of calculating the patch IDs was unstable in a sense that a different ordering the diffs was leading to different results. This oversight was fixed in git 1.9, but as git tries hard to never break existing workflows, the old and unstable way is still default. The newer and stable way does not care for ordering of the diff hunks, and in fact it is the mode that should probably be used today. So right now, we only implement the stable way of generating the patch ID.
0a513a94	2017-05-10T11:46:00	generate.py: disallow generating test suites for multiple paths Our generate.py script is used to extract and write test suite declarations into the clar.suite file. As is, the script accepts multiple directories on the command line and will generate this file for each of these directories. The generate.py script will always write the clar.suite file into the directory which is about to be scanned. This actually breaks out-of-tree builds with libgit2, as the file will be generated in the source tree instead of in the build tree. This is noticed especially in the case where the source tree is mounted read-only, rendering us unable to build unit tests. Due to us accepting multiple paths which are to be scanned, it is not trivial to fix though. The first solution which comes into mind would be to re-create the directory hierarchy at a given output path or use unique names for the clar.suite files, but this is rather cumbersome and magical. The second and cleaner solution would be to fold all directories into a single clar.suite file, but this would probably break some use-cases. Seeing that we do not ever pass multiple directories to generate.py, we will now simply retire support for this. This allows us to later on introduce an additional option to specify the path where the clar.suite file will be generated at, defaulting to "clar.suite" inside of the scanned directory.
b6ed67c2	2017-05-10T12:54:14	tests: refs::crashes: create sandbox for creating symref The test `refs::crashes::double_free` operates on our in-source "testrepo.git" repository without creating a copy first. As the test will try to create a new symbolic reference, this will fail when we want to do a pure out-of-tree build with a read-only source tree. Fix the issue by creating a sandbox first.
6ee7d37a	2017-05-10T12:51:06	tests: index::tests: create sandboxed repo for locking The test `index::tests::can_lock_index` operates on the "testrepo.git" repository located inside of our source tree. While this is okay for tests which do read-only operations on these resouces, this specific test tries to lock the index by creating a lock. This will obviously fail on out-of-tree builds with read-only source trees. Fix the issue by creating a sandbox first.
8d22bcea	2017-05-10T12:21:53	generate.py: generate clar cache in binary directory The source directory should usually not be touched when using out-of-tree builds. But next to the previously fixed "clar.suite" file, we are also writing the ".clarcache" into the project's source tree, breaking the builds. Fix this by also honoring the output directory for the ".clarcache" file.
9e240bd2	2017-05-10T12:02:03	generate.py: enable overriding path of generated clar.suite The generate.py script will currently always write the generated clar.suite file into the scanned directory, breaking out-of-tree builds with read-only source directories. Fix this issue by adding another option to allow overriding the output path of the generated file.
62c44c49	2017-06-21T12:25:26	Merge pull request #4211 from pks-t/pks/trusty travis: upgrade container to Ubuntu 14.04
c2c95ad0	2017-04-26T13:16:18	tests: online::clone: use URL of test server All our tests running against a local SSH server usually read the server's URL from environment variables. But online::clone::ssh_cert test fails to do so and instead always connects to "ssh://localhost/foo". This assumption breaks whenever the SSH server is not running on the standard port, e.g. when it is running as a user. Fix the issue by using the URL provided by the environment.
8e912e79	2017-06-16T21:05:58	tests: try to init with empty template path
8296da5f	2017-06-14T10:49:28	Merge pull request #4267 from mohseenrm/master adding GIT_FILTER_VERSION to GIT_FILTER_INIT as part of convention
a78441bc	2017-06-13T11:05:40	Adding git_filter_init for initializing `git_filter` struct + unit test
a180e7d9	2017-06-13T11:10:19	tests: odb: add more low-level backend tests Introduce a new test suite "odb::backend::simple", which utilizes the fake backend to exercise the ODB abstraction layer. While such tests already exist for the case where multiple backends are put together, no direct testing for functionality with a single backend exist yet.
b2e53f36	2017-06-13T11:39:36	tests: odb: implement `exists_prefix` for the fake backend The fake backend currently implements all reading functions except for the `exists_prefix` one. Implement it to enable further testing of the ODB layer.
983e627d	2017-06-13T11:38:59	tests: odb: use correct OID length The `search_object` function takes the OID length as one of its parameters, where its maximum length is `GIT_OID_HEXSZ`. The `exists` function of the fake backend used `GIT_OID_RAWSZ` though, leading to only the first half of the OID being used when finding the correct object.
c4cbb3b1	2017-06-13T11:38:14	tests: odb: have the fake backend detect ambiguous prefixes In order to be able to test the ODB prefix functions, we need to be able to detect ambiguous prefixes in case multiple objects with the same prefix exist in the fake ODB. Extend `search_object` to detect ambiguous queries and have callers return its error code instead of always returning `GIT_ENOTFOUND`.
95170294	2017-06-13T11:08:28	tests: core: test initialization of `git_proxy_options` Initialization of the `git_proxy_options` structure is never tested anywhere. Include it in our usual initialization test in "core::structinit::compare".
bee423cc	2017-06-13T10:29:23	tests: network: add missing include for `git_repository_new` A newly added test uses the `git_repository_new` function without the corresponding header file being included. While this works due to the compiler deducing the correct function signature, we should obviously just include the function's declaration file.
2ca088bd	2017-06-12T22:47:54	Merge pull request #4265 from pks-t/pks/read-prefix-tests Read prefix tests
fe9a5dd3	2017-06-12T12:00:14	remote: ensure we can create an anon remote on inmemory repo Given a wholly in-memory repository, ensure that we can create an anonymous remote and perform actions on it.
f148258a	2017-06-12T16:19:45	tests: odb: add tests with multiple backends Previous to pulling out and extending the fake backend, it was quite cumbersome to write tests for very specific scenarios regarding backends. But as we have made it more generic, it has become much easier to do so. As such, this commit adds multiple tests for scenarios with multiple backends for the ODB. The changes also include a test for a very targeted scenario. When one backend found a matching object via `read_prefix`, but the last backend returns `GIT_ENOTFOUND` and when object hash verification is turned off, we fail to reset the error code to `GIT_OK`. This causes us to segfault later on, when doing a double-free on the returned object.
6e010bb1	2017-06-12T15:43:56	tests: odb: allow passing fake objects to the fake backend Right now, the fake backend is quite restrained in the way how it works: we pass it an OID which it is to return later as well as an error code we want it to return. While this is sufficient for existing tests, we can make the fake backend a little bit more generic in order to allow us testing for additional scenarios. To do so, we change the backend to not accept an error code and OID which it is to return for queries, but instead a simple array of OIDs with their respective blob contents. On each query, the fake backend simply iterates through this array and returns the first matching object.
369cb45f	2017-06-12T15:21:58	tests: do not reuse OID from backend In order to make the fake backend more useful, we want to enable it holding multiple object references. To do so, we need to decouple it from the single fake OID it currently holds, which we simply move up into the calling tests.
2add34d0	2017-06-12T14:53:46	tests: odb: move fake backend into its own file The fake backend used by the test suite `odb::backend::nonrefreshing` is useful to have some low-level tests for the ODB layer. As such, we move the implementation into its own `backend_helpers` module.
6f960b55	2017-06-11T10:37:46	Merge pull request #4088 from chescock/packfile-name-using-complete-hash Ensure packfiles with different contents have different names
d2c4f764	2017-06-11T09:54:04	Merge pull request #4260 from libgit2/ethomson/forced_checkout_2 Update to forced checkout and untracked files
0ef405b3	2017-02-15T14:05:10	checkout: do not delete directories with untracked entries If the `GIT_CHECKOUT_FORCE` flag is given to any of the `git_checkout` invocations, we remove files which were previously staged. But while doing so, we unfortunately also remove unstaged files in a directory which contains at least one staged file, resulting in potential data loss. This commit adds two tests to verify behavior.
6c23704d	2017-06-08T21:40:18	settings: rename `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION` Initially, the setting has been solely used to enable the use of `fsync()` when creating objects. Since then, the use has been extended to also cover references and index files. As the option is not yet part of any release, we can still correct this by renaming the option to something more sensible, indicating not only correlation to objects. This commit renames the option to `GIT_OPT_ENABLE_FSYNC_GITDIR`. We also move the variable from the object to repository source code.
92d3ea4e	2017-05-19T13:04:32	tests: index::version: improve write test for index v4 The current write test does not trigger some edge-cases in the index version 4 path compression code. Rewrite the test to start off the an empty standard repository, creating index entries with interesting paths itself. This allows for more fine-grained control over checked paths. Furthermore, we now also verify that entry paths are actually reconstructed correctly.
8fe33538	2017-05-19T12:45:48	tests: index::version: verify we write compressed index entries While we do have a test which checks whether a written index of version 4 has the correct version set, we do not check whether this actually enables path compression for index entries. This commit adds a new test by adding a number of index entries with equal path prefixes to the index and subsequently flushing that to disk. With suffix compression enabled by index version 4, only the last few bytes of these paths will actually have to be written to the index, saving a lot of disk space. For the test, differences are about an order of magnitude, allowing us to easily verify without taking a deeper look at actual on-disk contents.
82368b1b	2017-05-12T10:04:42	tests: index::version: add test to read index version v4 While we have a simple test to determine whether we can write an index of version 4, we never verified that we are able to read this kind of index (and in fact, we were not able to do so). Add a new repository which has an index of version 4. This repository is then read from a new test.
fea0c81e	2017-05-12T09:09:07	tests: index::version: move up cleanup function The init and cleanup functions for test suites are usually prepended to our actual tests. The index::version test suite does not adhere to this stile. Fix this.
8a5e7aae	2017-05-22T12:53:44	varint: fix computation for remaining buffer space When encoding varints to a buffer, we want to remain sure that the required buffer space does not exceed what is actually available. Our current check does not do the right thing, though, in that it does not honor that our `pos` variable counts the position down instead of up. As such, we will require too much memory for small varints and not enough memory for big varints. Fix the issue by correctly calculating the required size as `(sizeof(varint) - pos)`. Add a test which failed before.
dd0aa811	2017-06-04T22:46:07	Merge branch 'pr/4228'
82e929a8	2017-06-04T19:35:39	Merge pull request #4239 from roblg/toplevel-dir-ignore-fix Fix issue with directory glob ignore in subdirectories
04de614b	2017-06-04T19:03:07	Merge pull request #4243 from pks-t/pks/submodule-workdir Submodule working directory
a1023a43	2017-05-20T17:18:07	Merge pull request #4179 from libgit2/ethomson/expand_tilde Introduce home directory expansion function for config files, attribute files
e694e4e9	2017-05-20T14:17:36	Merge pull request #4174 from libgit2/ethomson/set_head_to_tag git_repository_set_head: use tag name in reflog
119bdd86	2017-05-20T14:13:27	Merge pull request #4231 from wabain/open-revrange revparse: support open-ended ranges
c0e54155	2017-01-11T10:39:59	indexer: name pack files after trailer hash Upstream git.git has changed the way how packfiles are named. Previously, they were using a hash of the contained object's OIDs, which has then been changed to use the hash of the complete packfile instead. See 1190a1acf (pack-objects: name pack files after trailer hash, 2013-12-05) in the git.git repository for more information on this change. This commit changes our logic to match the behavior of core git.
2696c5c3	2017-05-19T09:21:17	repository: make check if repo is a worktree more strict To determine if a repository is a worktree or not, we currently check for the existence of a "gitdir" file inside of the repository's gitdir. While this is sufficient for non-broken repositories, we have at least one case of a subtly broken repository where there exists a gitdir file inside of a gitmodule. This will cause us to misidentify the submodule as a worktree. While this is not really a fault of ours, we can do better here by observing that a repository can only ever be a worktree iff its common directory and dotgit directory are different. This allows us to make our check whether a repo is a worktree or not more strict by doing a simple string comparison of these two directories. This will also allow us to do the right thing in the above case of a broken repository, as for submodules these directories will be the same. At the same time, this allows us to skip the `stat` check for the "gitdir" file for most repositories.
c3b8e8b3	2017-05-14T10:28:05	Fix issue with directory glob ignore in subdirectories

59ffb512

2017-11-24T10:37:09

Merge pull request #4298 from tiennou/gather-reflog-messages-tests Gather the reflog entry content tests

da635eda

2017-11-22T23:47:29

tests: move free functions at the end

ebe5d8ec

2017-07-21T20:12:01

tests: move static method to the top

f01a8587

2017-07-21T17:45:44

tests: make reflog_check_entry more clar-y

b9b1f9f8

2017-07-14T03:21:02

tests: clarify which steps corresponds to each checks

53672128

2017-07-21T17:35:30

tests: gather the reflog entry content tests

19f37f97

2017-11-13T13:16:28

add test status codes legend to the 'Started' test trace motivation: (for someone new to the tests) it's puzzling to find the odd 'S' interspersed in the test output proposed alternative test output (extract): $ cmake --build . && ./libgit2_clar -srepo -v ... Loaded 340 suites: Started (test status codes: OK='.' FAILURE='F' SKIPPED='S') repo::config... repo::discover.......... repo::env. repo::getters... repo::hashfile.. repo::head...................... repo::headtree.... repo::init.........................S repo::message.. repo::new.. repo::open............. repo::pathspec.......... repo::reservedname..... repo::setters..... repo::shallow.... repo::state.............

15f8d9a2

2017-11-13T11:44:30

Merge pull request #4412 from cpoerschke/master-tests-repo-init-tweak s/Init/Index comment tweak for test_repo_init__init_with_initial_commit

732c0b6d

2017-11-12T15:17:31

s/Init/Index comment tweak for test_repo_init__init_with_initial_commit

fd1492e8

2017-11-12T15:34:42

Merge pull request #4408 from hkleynhans/pos_neg_zero_offset_sig signature: distinguish +0000 and -0000 UTC offsets

f063dafb

2017-11-12T10:56:50

signature: distinguish +0000 and -0000 UTC offsets Git considers '-0000' a valid offset for signature lines. They need to be treated as _not_ equal to a '+0000' signature offset. Parsing a signature line stores the offset in a signed integer which does not distinguish between `+0` and `-0`. This patch adds an additional flag `sign` to the `git_time` in the `signature` object which is populated with the sign of the offset. In addition to exposing this information to the user, this information is also used to compare signatures. /cc @pks-t @ethomson

32758631

2017-11-11T15:38:27

clar: verify command line arguments before execute When executing `libgit2_clar -smerge -invalid_option`, it will first execute the merge test suite and afterwards output help because of the invalid option. With this changa, it verifies all options before execute. If there are any invalid options, it will output help and exit without actually executing the test suites.

0393ecc6

2017-11-11T13:29:27

Merge pull request #4308 from pks-t/pks/header-state-machine patch_parse: implement state machine for parsing patch headers

88450c1c

2017-11-09T21:49:30

Merge pull request #4283 from tiennou/generic-tls CMake: make HTTPS support more generic

8233f6e3

2017-11-04T23:34:14

Merge pull request #4386 from novalis/gitignore-ignore-space ignore spaces in .gitignore files

42627933

2017-11-04T18:03:26

Merge remote-tracking branch 'upstream/master' into pks/conditional-includes

c44b9170

2017-10-31T09:52:33

tests: resolve the real path for the sandbox in includeIf tests We put our repository in the temporary directory which makes macOS map the path into a virtual path. `realpath(3)` can resolve it and we do so during repository opening, but that makes its path have a different prefix from the sandbox path clar thinks we have. Resolve the sandbox path before putting it into the test config files so the paths match as expected.

bb8bc4b8

2017-10-30T06:21:55

config: add failing test for preserving case when writing keys While most parts of a configuration key are case-insensitive, we should still be case-preserving and write down whatever string the caller provided.

5cb6a2c9

2017-10-29T12:28:43

Ignore trailing whitespace in .gitignore files (as git itself does)

9980be03

2017-09-06T22:13:58

cmake: Add USE_HTTPS as a CMake option It defaults to ON, e.g. "pick whatever default is appropriate for the platform". It accepts one of SecureTransport, OpenSSL, WinHTTP, or OFF. It errors if the backend library couldn't be found.

d3ef11e0

2017-03-19T03:31:41

clar: exit immediately on initialization failure

e9369856

2017-03-21T00:25:15

stream: Gather streams to src/streams

08c1b8fc

2017-08-28T21:24:13

cmake: simplify some HTTPS tests

4da74c83

2017-10-20T07:29:17

cmake: use project-relative binary and source directories Due to our split of CMake files into multiple modules, we had to replace some uses of the `${CMAKE_CURRENT_SOURCE_DIR}` and `${CMAKE_CURRENT_BINARY_DIR}` variables and replace them with `${CMAKE_SOURCE_DIR}` and `${CMAKE_BINARY_DIR}`. This enabled us to still be able to refer to top-level files when defining build instructions inside of a subdirectory. When replacing all variables, it was assumed that the absolute set of variables is always relative to the current project. But in fact, this is not the case, as these variables always point to the source and binary directory as given by the top-levl project. So the change actually broke the ability to include libgit2 directly as a subproject, as source files cannot be found anymore. Fix this by instead using project-specific source and binary directories with `${libgit2_SOURCE_DIR}` and `${libgit2_BINARY_DIR}`.

f7d837c8

2017-05-24T12:12:29

config_file: implement "gitdir/i" conditional Next to the "gitdir" conditional for including other configuration files, there's also a "gitdir/i" conditional. In contrast to the former one, path matching with "gitdir/i" is done case-insensitively. This commit implements the case-insensitive condition.

071b6c06

2017-05-24T11:13:36

config_file: implement conditional "gitdir" includes Upstream git.git has implemented the ability to include other configuration files based on conditions. Right now, this only includes the ability to include a file based on the gitdir-location of the repository the currently parsed configuration file belongs to. This commit implements handling these conditional includes for the case-sensitive "gitdir" condition.

529e873c

2017-05-23T11:51:00

config: pass repository when opening config files Our current configuration logic is completely oblivious of any repository, but only cares for actual file paths. Unfortunately, we are forced to break this assumption by the introduction of conditional includes, which are evaluated in the context of a repository. Right now, only one conditional exists with "gitdir:" -- it will only include the configuration if the current repository's git directory matches the value passed to "gitdir:". To support these conditionals, we have to break our API and make the repository available when opening a configuration file. This commit extends the `open` call of configuration backends to include another repository and adjusts existing code to have it available. This includes the user-visible functions `git_config_add_file_ondisk` and `git_config_add_backend`.

09c15a7f

2017-10-09T09:08:19

tests: checkout::tree: check that the status list catches mode changes While we verify that we have no mode changes after calling `git_checkout_tree`, we do not verify that the `p_chmod` calls actually resulted in a changed entry. While we should assume that this works due to separate tests for the status list, we should test for the change being listed to avoid programming errors in the test.

880dfc50

2017-10-09T09:06:24

tests: checkout::tree: extract check for status entrycount There are multiple locations where we have the same code to check whether the count of status list entries of a repository matches an expected number. Extract that into a common function.

38e769cb

2017-10-09T09:00:29

Merge pull request #4369 from libgit2/ethomson/checkout_typechange Checkout typechange-only deltas

19e8faba

2016-06-15T01:59:56

checkout: test force checkout when mode changes Test that we can successfully force checkout a target when the file contents are identical, but the mode has changed.

b112b1e9

2017-10-06T11:24:11

refs: do not use peeled OID if peeling to a tag If a reference stored in a packed-refs file does not directly point to a commit, tree or blob, the packed-refs file will also will include a fully-peeled OID pointing to the first underlying object of that type. If we try to peel a reference to an object, we will use that peeled OID to speed up resolving the object. As a reference for an annotated tag does not directly point to a commit, tree or blob but instead to the tag object, the packed-refs file will have an accomodating fully-peeled OID pointing to the object referenced by that tag. When we use the fully-peeled OID pointing to the referenced object when peeling, we obviously cannot peel that to the tag anymore. Fix this issue by not using the fully-peeled OID whenever we want to peel to a tag. Note that this does not include the case where we want to resolve to _any_ object type. Existing code may make use from the fact that we resolve those to commit objects instead of tag objects, even though that behaviour is inconsistent between packed and loose references. Furthermore, some tests of ours make the assumption that we in fact resolve those references to a commit.

d8d2f21e

2017-09-06T07:52:12

cmake: unify version check for target include directories There are two locations where we check whether CMake supports `TARGET_INCLUDE_DIRECTORIES`. While the first one uses `VERSION_LESS 2.8.12`, the second one uses `VERSION_GREATER 2.8.11`, which are obviously equivalent to each other. It'd still be easier to grep for specific CMake versions being required for some features if both used the same conditional mentioning the actual target version required. So this commit refactors these conditions to make them equal.

1d9dd882

2017-09-05T15:06:29

cmake: distinguish libgit2 objects and sources Distinguish variables keeping track of our internal libgit2 sources and the final objects which shall be linked into the library. This will ease the transition to use object libraries for our bundled dependencies instead of linking them in.

cc4c44a9

2017-09-01T09:37:05

patch_parse: fix parsing patches only containing exact renames Patches which contain exact renames only will not contain an actual diff body, but only a list of files that were renamed. Thus, the patch header is immediately followed by the terminating sequence "-- ". We currently do not recognize this character sequence as a possible terminating sequence. Add it and create a test to catch the failure.

583e4141

2017-08-30T14:35:57

tests: deterministically generate test suite definitions The script "generate.py" is used to parse all test source files for unit tests. These are then written into a "clar.suite" file, which can be included by the main test executable to make available all test suites and unit tests. Our current algorithm simply collects all test suites inside of a dict, iterates through its items and dumps them in a special format into the file. As the order is not guaranteed to be deterministic for Python dictionaries, this may result in arbitrarily ordered C structs. This obviously defeats the purpose of reproducible builds, where the same input should always result in the exact same output. Fix this issue by sorting the test suites by name previous to dumping them as structs. This enables reproducible builds for the libgit2_clar file.

3c216453

2017-08-25T21:06:46

Merge pull request #4296 from pks-t/pks/pattern-based-gitignore Fix negative ignore rules with patterns

477b3e04

2017-07-10T12:25:43

submodule: refuse lookup in bare repositories While it is technically possible to look up submodules inside of a bare repository by reading the submodule configuration of a specific commit, we do not offer this functionality right now. As such, calling both `git_submodule_lookup` and `git_submodule_foreach` should error out early when these functions encounter a bare repository. While `git_submodule_lookup` already does return an error due to not being able to parse the configuration, `git_submodule_foreach` simply returns success and never invokes the callback function. Fix the issue by having both functions check whether the repository is bare and returning an error in that case.

a889c05f

2017-07-10T11:55:33

tests: submodule: add explicit cleanup function in lookup tests

64d1e0b3

2017-07-10T11:52:08

tests: submodule: fix declaration of test The testcase "submodule::lookup::cached" was declared with a single underscore separating the test suide and test name, only. As the clar parser only catches tests with two underscores, it was never executed. Add in the second underscore to actually have it detected and executed.

2d9ff8f5

2017-07-10T09:36:19

ignore: honor case insensitivity for negative ignores When computing negative ignores, we throw away any rule which does not undo a previous rule to optimize. But on case insensitive file systems, we need to keep in mind that a negative ignore can also undo a previous rule with different case, which we did not yet honor while determining whether a rule undoes a previous one. So in the following example, we fail to unignore the "/Case" directory: /case !/Case Make both paths checking whether a plain- or wildcard-based rule undo a previous rule aware of case-insensitivity. This fixes the described issue.

38b44c3b

2017-07-07T17:10:57

tests: status: additional test for negative ignores with pattern This test is by Carlos Martín Nieto.

b8922fc8

2017-07-07T13:27:27

ignore: keep negative rules containing wildcards Ignore rules allow for reverting a previously ignored rule by prefixing it with an exclamation mark. As such, a negative rule can only override previously ignored files. While computing all ignore patterns, we try to use this fact to optimize away some negative rules which do not override any previous patterns, as they won't change the outcome anyway. In some cases, though, this optimization causes us to get the actual ignores wrong for some files. This may happen whenever the pattern contains a wildcard, as we are unable to reason about whether a pattern overrides a previous pattern in a sane way. This happens for example in the case where a gitignore file contains "*.c" and "!src/*.c", where we wouldn't un-ignore files inside of the "src/" subdirectory. In this case, the first solution coming to mind may be to just strip the "src/" prefix and simply compare the basenames. While that would work here, it would stop working as soon as the basename pattern itself is different, like for example with "*x.c" and "!src/*.c. As such, we settle for the easier fix of just not optimizing away rules that contain a wildcard.

8e31cc25

2017-06-28T12:51:14

cmake: keep track of libraries and includes via lists Later on, we will move detection of required libraries, library directories as well as include directories into a separate CMakeLists.txt file inside of the source directory. Obviously, we want to avoid duplication here regarding these parameters. To prepare for the split, put the parameters into three variables LIBGIT2_LIBS, LIBGIT2_LIBDIRS and LIBGIT2_INCLUDES, tracking the required libraries, linking directory as well as include directories. These variables can later be exported into the parent scope from inside of the source build instructions, making them readily available for the other subdirectories.

a390a846

2017-07-01T13:06:00

cmake: move defines into "features.h" header In a future commit, we will split out the build instructions for our library directory and move them into a subdirectory. One of the benefits is fixing scoping issues, where e.g. defines do not leak to build targets where they do not belong to. But unfortunately, this does also pose the problem of how to propagate some defines which are required by both the library and the test suite. One way would be to create another variable keeping track of all added defines and declare it inside of the parent scope. While this is the most obvious and simplest way of going ahead, it is kind of unfortunate. The main reason to not use this is that these defines become implicit dependencies between the build targets. By simply observing a define inside of the CMakeLists.txt file, one cannot reason whether this define is only required by the current target or whether it is required by different targets, as well. Another approach would be to use an internal header file keeping track of all defines shared between targets. While configuring the library, we will set various variables and let CMake configure the file, adding or removing defines based on what has been configured. Like this, one can easily keep track of the current environment by simply inspecting the header file. Furthermore, these dependencies are becoming clear inside the CMakeLists.txt, as instead of simply adding a define, we now call e.g. `SET(GIT_THREADSAFE 1)`. Having this header file though requires us to make sure it is always included before any "#ifdef"-preprocessor checks are executed. As we have already refactored code to always include the "common.h" header file before any statement inside of a file, this becomes easy: just make sure "common.h" includes the new "features.h" header file first.

35087f0e

2017-06-28T15:42:54

cmake: create separate CMakeLists.txt for tests Our CMakeLists.txt is very unwieldy in its current size, spanning more than 700 lines of code. Furthermore, it has several issues regarding scoping, where for example some defines, includes, etc. from our test suite are also applied to our normal library code. To fix this, we can separate out build instructions for our tests and move them into their own CMakeLists.txt in the "tests" directory. This reduced complexity of the root CMakeLists.txt file and fixes the issues regarding leaking build context from tests into the library.

3267115f

2017-06-28T15:41:15

cmake: create own precompiled headers for tests As soon as we split up our CMakeBuild.txt build instructions, we will be unable to simply link against the git2 library's precompiled header from other targets. To avoid this future breakage, create a new precompiled header for our test suite. Next to being compatible with the split, this enables us to also include additional files like the clar headers, which may help speeding up compilation of the test suite.

fb585d01

2017-07-31T00:58:58

Merge branch '4233'

c0558c62

2017-07-28T09:01:41

tests: rebase::submodule: verify initialization method calls Some return codes for functions which may fail are not being checked in `test_rebase_submodule__initialize`. This may lead us to not notice errors when initializing the environment and would possibly result in either memory corruption or segfaults as soon as any of the initialization steps fails. Fix this by wrapping these function calls into `cl_git_pass`.

4f4bc573

2017-07-27T23:05:53

Merge pull request #4275 from tiennou/fix-rebase-submodule-test tests: rewrite rebase-submodule .gitmodule file

35cb7b84

2017-07-20T21:00:15

tests: fix the rebase-submodule test

45994fdc

2017-06-21T14:57:30

Remove invalid submodule Fixes #4274

e0568621

2017-07-19T13:55:55

Merge pull request #4250 from pks-t/pks/config-file-iteration Configuration file fixes with includes

a94a5402

2017-07-19T13:28:32

Merge pull request #4272 from pks-t/pks/patch-id Patch ID calculation

1b329089

2017-05-31T22:27:19

config_file: refuse modifying included variables Modifying variables pulled in by an included file currently succeeds, but it doesn't actually do what one would expect, as refreshing the configuration will cause the values to reappear. As we are currently not really able to support this use case, we will instead just return an error for deleting and setting variables which were included via an include.

28c2cc3d

2017-05-31T16:41:44

config_file: move reader into `config_read` only Right now, we have multiple call sites which initialize a `reader` structure. As the structure is only actually used inside of `config_read`, we can instead just move the reader inside of the `config_read` function. Instead, we can just pass in the configuration file into `config_read`, which eases code readability.

83bcd3a1

2017-05-31T22:45:25

config_file: refresh all files if includes were modified Currently, we only re-parse the top-level configuration file when it has changed itself. This can cause problems when an include is changed, as we were not updating all values correctly. Instead of conditionally reparsing only refreshed files, the logic becomes much clearer and easier to follow if we always re-parse the top-level configuration file when either the file itself or one of its included configuration files has changed on disk. This commit implements this logic. Note that this might impact performance in some cases, as we need to re-read all configuration files whenever any of the included files changed. It could increase performance to just re-parse include files which have actually changed, but this would compromise maintainability of the code without much gain. The only case where we will gain anything is when we actually use includes and when only these includes are updated, which will probably be quite an unusual scenario to actually be worthwhile to optimize.

6f7aab0c

2017-06-06T09:45:11

tests: config::include: use init and cleanup functions

1f7af277

2017-07-05T11:52:47

tests: config: fix missing declaration causing error On systems where we pull in our distributed version of the regex library, all tests in config::readonly fail. This error is actually quite interesting: the test suite is unable to find the declaration of `git_path_exists` and assumes it has a signature of `int git_path_exists(const char *)`. But actually, it has a `bool` return value. Due to this confusion, some wrong conversion is done by the compiler and the `cl_assert(!git_path_exists("file"))` checks erroneously fail, even when the function does in fact return the correct value. The error is actually introduced by 56893bb9a (cmake: consistently use TARGET_INCLUDE_DIRECTORIES if available, 2017-06-28), unfortunately introduced by myself. Due to the delayed addition of include directories, we will now find the "config.h" header inside of the "deps/regex" directory instead of inside the "src/" directory, where it should be. As such, we are missing definitions for the `git_config_file__ondisk` and `git_path_exists` symbols. The correct fix here would be to fix the order in which include search directories are added. But due to the current restructuring of CMakeBuild.txt, I'm refraining from doing so and delay the proper fix a bit. Instead, we paper over the issue by explicitly including "path.h" to fix its prototype. This ignores the issue that `git_config_file__ondisk` is undeclared, as its signature is correctly identified by the compiler.

89a34828

2017-06-16T13:34:43

diff: implement function to calculate patch ID The upstream git project provides the ability to calculate a so-called patch ID. Quoting from git-patch-id(1): A "patch ID" is nothing but a sum of SHA-1 of the file diffs associated with a patch, with whitespace and line numbers ignored." Patch IDs can be used to identify two patches which are probably the same thing, e.g. when a patch has been cherry-picked to another branch. This commit implements a new function `git_diff_patchid`, which gets a patch and derives an OID from the diff. Note the different terminology here: a patch in libgit2 are the differences in a single file and a diff can contain multiple patches for different files. The implementation matches the upstream implementation and should derive the same OID for the same diff. In fact, some code has been directly derived from the upstream implementation. The upstream implementation has two different modes to calculate patch IDs, which is the stable and unstable mode. The old way of calculating the patch IDs was unstable in a sense that a different ordering the diffs was leading to different results. This oversight was fixed in git 1.9, but as git tries hard to never break existing workflows, the old and unstable way is still default. The newer and stable way does not care for ordering of the diff hunks, and in fact it is the mode that should probably be used today. So right now, we only implement the stable way of generating the patch ID.

0a513a94

2017-05-10T11:46:00

generate.py: disallow generating test suites for multiple paths Our generate.py script is used to extract and write test suite declarations into the clar.suite file. As is, the script accepts multiple directories on the command line and will generate this file for each of these directories. The generate.py script will always write the clar.suite file into the directory which is about to be scanned. This actually breaks out-of-tree builds with libgit2, as the file will be generated in the source tree instead of in the build tree. This is noticed especially in the case where the source tree is mounted read-only, rendering us unable to build unit tests. Due to us accepting multiple paths which are to be scanned, it is not trivial to fix though. The first solution which comes into mind would be to re-create the directory hierarchy at a given output path or use unique names for the clar.suite files, but this is rather cumbersome and magical. The second and cleaner solution would be to fold all directories into a single clar.suite file, but this would probably break some use-cases. Seeing that we do not ever pass multiple directories to generate.py, we will now simply retire support for this. This allows us to later on introduce an additional option to specify the path where the clar.suite file will be generated at, defaulting to "clar.suite" inside of the scanned directory.

b6ed67c2

2017-05-10T12:54:14

tests: refs::crashes: create sandbox for creating symref The test `refs::crashes::double_free` operates on our in-source "testrepo.git" repository without creating a copy first. As the test will try to create a new symbolic reference, this will fail when we want to do a pure out-of-tree build with a read-only source tree. Fix the issue by creating a sandbox first.

6ee7d37a

2017-05-10T12:51:06

tests: index::tests: create sandboxed repo for locking The test `index::tests::can_lock_index` operates on the "testrepo.git" repository located inside of our source tree. While this is okay for tests which do read-only operations on these resouces, this specific test tries to lock the index by creating a lock. This will obviously fail on out-of-tree builds with read-only source trees. Fix the issue by creating a sandbox first.

8d22bcea

2017-05-10T12:21:53

generate.py: generate clar cache in binary directory The source directory should usually not be touched when using out-of-tree builds. But next to the previously fixed "clar.suite" file, we are also writing the ".clarcache" into the project's source tree, breaking the builds. Fix this by also honoring the output directory for the ".clarcache" file.

9e240bd2

2017-05-10T12:02:03

generate.py: enable overriding path of generated clar.suite The generate.py script will currently always write the generated clar.suite file into the scanned directory, breaking out-of-tree builds with read-only source directories. Fix this issue by adding another option to allow overriding the output path of the generated file.

62c44c49

2017-06-21T12:25:26

Merge pull request #4211 from pks-t/pks/trusty travis: upgrade container to Ubuntu 14.04

c2c95ad0

2017-04-26T13:16:18

tests: online::clone: use URL of test server All our tests running against a local SSH server usually read the server's URL from environment variables. But online::clone::ssh_cert test fails to do so and instead always connects to "ssh://localhost/foo". This assumption breaks whenever the SSH server is not running on the standard port, e.g. when it is running as a user. Fix the issue by using the URL provided by the environment.

8e912e79

2017-06-16T21:05:58

tests: try to init with empty template path

8296da5f

2017-06-14T10:49:28

Merge pull request #4267 from mohseenrm/master adding GIT_FILTER_VERSION to GIT_FILTER_INIT as part of convention

a78441bc

2017-06-13T11:05:40

Adding git_filter_init for initializing `git_filter` struct + unit test

a180e7d9

2017-06-13T11:10:19

tests: odb: add more low-level backend tests Introduce a new test suite "odb::backend::simple", which utilizes the fake backend to exercise the ODB abstraction layer. While such tests already exist for the case where multiple backends are put together, no direct testing for functionality with a single backend exist yet.

b2e53f36

2017-06-13T11:39:36

tests: odb: implement `exists_prefix` for the fake backend The fake backend currently implements all reading functions except for the `exists_prefix` one. Implement it to enable further testing of the ODB layer.

983e627d

2017-06-13T11:38:59

tests: odb: use correct OID length The `search_object` function takes the OID length as one of its parameters, where its maximum length is `GIT_OID_HEXSZ`. The `exists` function of the fake backend used `GIT_OID_RAWSZ` though, leading to only the first half of the OID being used when finding the correct object.

c4cbb3b1

2017-06-13T11:38:14

tests: odb: have the fake backend detect ambiguous prefixes In order to be able to test the ODB prefix functions, we need to be able to detect ambiguous prefixes in case multiple objects with the same prefix exist in the fake ODB. Extend `search_object` to detect ambiguous queries and have callers return its error code instead of always returning `GIT_ENOTFOUND`.

95170294

2017-06-13T11:08:28

tests: core: test initialization of `git_proxy_options` Initialization of the `git_proxy_options` structure is never tested anywhere. Include it in our usual initialization test in "core::structinit::compare".

bee423cc

2017-06-13T10:29:23

tests: network: add missing include for `git_repository_new` A newly added test uses the `git_repository_new` function without the corresponding header file being included. While this works due to the compiler deducing the correct function signature, we should obviously just include the function's declaration file.

2ca088bd

2017-06-12T22:47:54

Merge pull request #4265 from pks-t/pks/read-prefix-tests Read prefix tests

fe9a5dd3

2017-06-12T12:00:14

remote: ensure we can create an anon remote on inmemory repo Given a wholly in-memory repository, ensure that we can create an anonymous remote and perform actions on it.

f148258a

2017-06-12T16:19:45

tests: odb: add tests with multiple backends Previous to pulling out and extending the fake backend, it was quite cumbersome to write tests for very specific scenarios regarding backends. But as we have made it more generic, it has become much easier to do so. As such, this commit adds multiple tests for scenarios with multiple backends for the ODB. The changes also include a test for a very targeted scenario. When one backend found a matching object via `read_prefix`, but the last backend returns `GIT_ENOTFOUND` and when object hash verification is turned off, we fail to reset the error code to `GIT_OK`. This causes us to segfault later on, when doing a double-free on the returned object.

6e010bb1

2017-06-12T15:43:56

tests: odb: allow passing fake objects to the fake backend Right now, the fake backend is quite restrained in the way how it works: we pass it an OID which it is to return later as well as an error code we want it to return. While this is sufficient for existing tests, we can make the fake backend a little bit more generic in order to allow us testing for additional scenarios. To do so, we change the backend to not accept an error code and OID which it is to return for queries, but instead a simple array of OIDs with their respective blob contents. On each query, the fake backend simply iterates through this array and returns the first matching object.

369cb45f

2017-06-12T15:21:58

tests: do not reuse OID from backend In order to make the fake backend more useful, we want to enable it holding multiple object references. To do so, we need to decouple it from the single fake OID it currently holds, which we simply move up into the calling tests.

2add34d0

2017-06-12T14:53:46

tests: odb: move fake backend into its own file The fake backend used by the test suite `odb::backend::nonrefreshing` is useful to have some low-level tests for the ODB layer. As such, we move the implementation into its own `backend_helpers` module.

6f960b55

2017-06-11T10:37:46

Merge pull request #4088 from chescock/packfile-name-using-complete-hash Ensure packfiles with different contents have different names

d2c4f764

2017-06-11T09:54:04

Merge pull request #4260 from libgit2/ethomson/forced_checkout_2 Update to forced checkout and untracked files

0ef405b3

2017-02-15T14:05:10

checkout: do not delete directories with untracked entries If the `GIT_CHECKOUT_FORCE` flag is given to any of the `git_checkout` invocations, we remove files which were previously staged. But while doing so, we unfortunately also remove unstaged files in a directory which contains at least one staged file, resulting in potential data loss. This commit adds two tests to verify behavior.

6c23704d

2017-06-08T21:40:18

settings: rename `GIT_OPT_ENABLE_SYNCHRONOUS_OBJECT_CREATION` Initially, the setting has been solely used to enable the use of `fsync()` when creating objects. Since then, the use has been extended to also cover references and index files. As the option is not yet part of any release, we can still correct this by renaming the option to something more sensible, indicating not only correlation to objects. This commit renames the option to `GIT_OPT_ENABLE_FSYNC_GITDIR`. We also move the variable from the object to repository source code.

92d3ea4e

2017-05-19T13:04:32

tests: index::version: improve write test for index v4 The current write test does not trigger some edge-cases in the index version 4 path compression code. Rewrite the test to start off the an empty standard repository, creating index entries with interesting paths itself. This allows for more fine-grained control over checked paths. Furthermore, we now also verify that entry paths are actually reconstructed correctly.

8fe33538

2017-05-19T12:45:48

tests: index::version: verify we write compressed index entries While we do have a test which checks whether a written index of version 4 has the correct version set, we do not check whether this actually enables path compression for index entries. This commit adds a new test by adding a number of index entries with equal path prefixes to the index and subsequently flushing that to disk. With suffix compression enabled by index version 4, only the last few bytes of these paths will actually have to be written to the index, saving a lot of disk space. For the test, differences are about an order of magnitude, allowing us to easily verify without taking a deeper look at actual on-disk contents.

82368b1b

2017-05-12T10:04:42

tests: index::version: add test to read index version v4 While we have a simple test to determine whether we can write an index of version 4, we never verified that we are able to read this kind of index (and in fact, we were not able to do so). Add a new repository which has an index of version 4. This repository is then read from a new test.

fea0c81e

2017-05-12T09:09:07

tests: index::version: move up cleanup function The init and cleanup functions for test suites are usually prepended to our actual tests. The index::version test suite does not adhere to this stile. Fix this.

8a5e7aae

2017-05-22T12:53:44

varint: fix computation for remaining buffer space When encoding varints to a buffer, we want to remain sure that the required buffer space does not exceed what is actually available. Our current check does not do the right thing, though, in that it does not honor that our `pos` variable counts the position down instead of up. As such, we will require too much memory for small varints and not enough memory for big varints. Fix the issue by correctly calculating the required size as `(sizeof(varint) - pos)`. Add a test which failed before.

dd0aa811

2017-06-04T22:46:07

Merge branch 'pr/4228'

82e929a8

2017-06-04T19:35:39

Merge pull request #4239 from roblg/toplevel-dir-ignore-fix Fix issue with directory glob ignore in subdirectories

04de614b

2017-06-04T19:03:07

Merge pull request #4243 from pks-t/pks/submodule-workdir Submodule working directory

a1023a43

2017-05-20T17:18:07

Merge pull request #4179 from libgit2/ethomson/expand_tilde Introduce home directory expansion function for config files, attribute files

e694e4e9

2017-05-20T14:17:36

Merge pull request #4174 from libgit2/ethomson/set_head_to_tag git_repository_set_head: use tag name in reflog

119bdd86

2017-05-20T14:13:27

Merge pull request #4231 from wabain/open-revrange revparse: support open-ended ranges

c0e54155

2017-01-11T10:39:59

indexer: name pack files after trailer hash Upstream git.git has changed the way how packfiles are named. Previously, they were using a hash of the contained object's OIDs, which has then been changed to use the hash of the complete packfile instead. See 1190a1acf (pack-objects: name pack files after trailer hash, 2013-12-05) in the git.git repository for more information on this change. This commit changes our logic to match the behavior of core git.

2696c5c3

2017-05-19T09:21:17

repository: make check if repo is a worktree more strict To determine if a repository is a worktree or not, we currently check for the existence of a "gitdir" file inside of the repository's gitdir. While this is sufficient for non-broken repositories, we have at least one case of a subtly broken repository where there exists a gitdir file inside of a gitmodule. This will cause us to misidentify the submodule as a worktree. While this is not really a fault of ours, we can do better here by observing that a repository can only ever be a worktree iff its common directory and dotgit directory are different. This allows us to make our check whether a repo is a worktree or not more strict by doing a simple string comparison of these two directories. This will also allow us to do the right thing in the above case of a broken repository, as for submodules these directories will be the same. At the same time, this allows us to skip the `stat` check for the "gitdir" file for most repositories.

c3b8e8b3

2017-05-14T10:28:05

Fix issue with directory glob ignore in subdirectories

thodg/libgit2/tests

tests

Log