kmx git

Commit	Date	Message
b1a6c316	2013-08-30T17:36:00	odb: Move the auto refresh logic to the pack backend Previously, `git_object_read()`, `git_object_read_prefix()` and `git_object_exists()` were implementing an auto refresh logic. When the expected object couldn't be found in any backend, a call to `git_odb_refresh()` was triggered and the lookup was once again performed against all backends. This commit removes this auto-refresh logic from the odb layer and pushes it down into the pack-backend (as it's the only one currently exposing a `refresh()` endpoint).
b8b22d77	2013-08-28T06:04:51	Merge pull request #1772 from libgit2/config-iter Configuration iterators redux
7a3764be	2013-08-17T01:55:52	odb: document git_odb_stream Clarify the role of each function and in particular mention that there is no need for the backend or stream to worry about the object's id, as it will be given when `finalize_write` is called.
fe0c6d4e	2013-08-17T01:41:08	odb: make it clearer that the id is calculated in the frontend The frontend is in charge of calculating the id of the objects. Thus the backends should treat it as a read-only value. The positioning in the function signature made it seem as though it was an output parameter. Make the id const and move it from the front to behind the subject (backend or stream).
f4be8209	2013-08-14T00:45:05	config: don't special-case the multivar iterator Build it on top of the normal iterator instead, which lets use re-use a lot of code.
99dfb538	2013-08-08T17:57:59	config: working multivar iterator Implement the foreach version as a wrapper around the iterator.
cca5df63	2013-08-08T16:59:39	config: hopefully get the iterator to work on multivars
3a7ffc29	2013-08-08T16:18:07	config: initial multivar iterator
eba73992	2013-08-08T14:39:32	config: move next() and free() into the iterator Like we have in the references iterator, next and free belong in the iterator itself.
4efa3290	2013-08-08T13:41:18	config: get_multivar -> get_multivar_foreach The plain function will return an iterator, so move this one out of the way.
4d588d97	2013-08-08T11:24:47	Don't typedef a pointer Make the iterator structure opaque and make sure it compiles.
a603c191	2013-03-18T21:02:36	replaced foreach() with non callback based iterations in git_config_backend new functions in struct git_config_backend: * iterator_new(...) * iterator_free(...) * next(...) The old callback based foreach style can still be used with `git_config_backend_foreach_match`
c05a55b0	2013-07-23T09:40:19	Clean up some documentation clang's docparser highlighted these.
4e6e2ff2	2013-05-30T03:47:10	...Aaaand this works
ec24e542	2013-05-29T22:47:37	What are the chances, really
56960b83	2013-05-28T20:47:55	Liike this
16adc9fa	2013-05-24T10:35:58	Typedef git_config_level_t and use it everywhere The GIT_CONFIG_LEVEL constants actually work well as an enum because they are mutually exclusive, so this adds a typedef to the enum and uses that everywhere that one of these constants are expected, instead of the old code that typically used an unsigned int.
1fed6b07	2013-05-13T21:57:37	Fix trailing whitespaces
0cb16fe9	2013-05-15T20:26:55	Unify whitespaces to tabs
b6cc559a	2013-05-11T02:42:49	Merge pull request #1385 from carlosmn/refs-iter Introduce a refs iterator
c58cac12	2013-05-04T18:06:14	Introduce a glob-filtering iterator If the backend doesn't provide support for it, the matching is done in refdb on top of a normal iterator.
2b562c3a	2013-05-04T16:32:58	refs: remove the OID/SYMBOLIC filtering Nobody should ever be using anything other than ALL at this level, so remove the option altogether. As part of this, git_reference_foreach_glob is now implemented in the frontend using an iterator. Backends will later regain the ability of doing the glob filtering in the backend.
4def7035	2013-03-02T19:31:03	refs: introduce an iterator This allows us to get a list of reference names in a loop instead of callbacks.
467cbec7	2013-05-05T16:48:34	commit: make create_from_oids() accept plain oid
75d1c8c6	2013-04-30T17:33:11	move NAME and REUC extensions to sys/
879458e7	2013-04-24T15:52:33	repo: Add `git_repository__cleanup`
21ca0451	2013-04-21T12:52:17	Move git_reference__alloc to include/git2/sys Create a new include/git2/sys/refs.h and move the reference alloc functions there. Also fix some documentation issues and some minor code cleanups.
4dcd8780	2013-04-19T17:17:44	Move refdb_backend to include/git2/sys This moves most of the refdb stuff over to the include/git2/sys directory, with some minor shifts in function organization. While I was making the necessary updates, I also removed the trailing whitespace in a few files that I modified just because I was there and it was bugging me.
9233b3de	2013-04-19T13:17:29	Move git_commit_create_from_oids into sys/commit.h Actually this renames git_commit_create_oid to git_commit_create_from_oids and moves the API declaration to include/git2/sys/commit.h since it is a dangerous API for general use (because it doesn't check that the OID list items actually refer to real objects).
1384b688	2013-04-19T13:00:12	Move some low-level repo fns to include/git2/sys
83cc70d9	2013-04-19T12:48:33	Move odb_backend implementors stuff into git2/sys This moves some of the odb_backend stuff that is related to the internals of an odb_backend implementation into include/git2/sys. Some of the stuff related to streaming I left in include/git2 because it seemed like it would be reasonably needed by a normal user who wanted to stream objects into and out of the ODB. Also, I added APIs for traversing the list of backends so that some of the tests would not need to access ODB internals.
83041c71	2013-04-19T11:52:04	Move git_config_backend to include/git2/sys Moving backend implementor objects into include/git2/sys so the APIs can be isolated from the ones that normal libgit2 users would be likely to use.

b1a6c316

2013-08-30T17:36:00

odb: Move the auto refresh logic to the pack backend Previously, `git_object_read()`, `git_object_read_prefix()` and `git_object_exists()` were implementing an auto refresh logic. When the expected object couldn't be found in any backend, a call to `git_odb_refresh()` was triggered and the lookup was once again performed against all backends. This commit removes this auto-refresh logic from the odb layer and pushes it down into the pack-backend (as it's the only one currently exposing a `refresh()` endpoint).

b8b22d77

2013-08-28T06:04:51

Merge pull request #1772 from libgit2/config-iter Configuration iterators redux

7a3764be

2013-08-17T01:55:52

odb: document git_odb_stream Clarify the role of each function and in particular mention that there is no need for the backend or stream to worry about the object's id, as it will be given when `finalize_write` is called.

fe0c6d4e

2013-08-17T01:41:08

odb: make it clearer that the id is calculated in the frontend The frontend is in charge of calculating the id of the objects. Thus the backends should treat it as a read-only value. The positioning in the function signature made it seem as though it was an output parameter. Make the id const and move it from the front to behind the subject (backend or stream).

f4be8209

2013-08-14T00:45:05

config: don't special-case the multivar iterator Build it on top of the normal iterator instead, which lets use re-use a lot of code.

99dfb538

2013-08-08T17:57:59

config: working multivar iterator Implement the foreach version as a wrapper around the iterator.

cca5df63

2013-08-08T16:59:39

config: hopefully get the iterator to work on multivars

3a7ffc29

2013-08-08T16:18:07

config: initial multivar iterator

eba73992

2013-08-08T14:39:32

config: move next() and free() into the iterator Like we have in the references iterator, next and free belong in the iterator itself.

4efa3290

2013-08-08T13:41:18

config: get_multivar -> get_multivar_foreach The plain function will return an iterator, so move this one out of the way.

4d588d97

2013-08-08T11:24:47

Don't typedef a pointer Make the iterator structure opaque and make sure it compiles.

a603c191

2013-03-18T21:02:36

replaced foreach() with non callback based iterations in git_config_backend new functions in struct git_config_backend: * iterator_new(...) * iterator_free(...) * next(...) The old callback based foreach style can still be used with `git_config_backend_foreach_match`

c05a55b0

2013-07-23T09:40:19

Clean up some documentation clang's docparser highlighted these.

4e6e2ff2

2013-05-30T03:47:10

...Aaaand this works

ec24e542

2013-05-29T22:47:37

What are the chances, really

56960b83

2013-05-28T20:47:55

Liike this

16adc9fa

2013-05-24T10:35:58

Typedef git_config_level_t and use it everywhere The GIT_CONFIG_LEVEL constants actually work well as an enum because they are mutually exclusive, so this adds a typedef to the enum and uses that everywhere that one of these constants are expected, instead of the old code that typically used an unsigned int.

1fed6b07

2013-05-13T21:57:37

Fix trailing whitespaces

0cb16fe9

2013-05-15T20:26:55

Unify whitespaces to tabs

b6cc559a

2013-05-11T02:42:49

Merge pull request #1385 from carlosmn/refs-iter Introduce a refs iterator

c58cac12

2013-05-04T18:06:14

Introduce a glob-filtering iterator If the backend doesn't provide support for it, the matching is done in refdb on top of a normal iterator.

2b562c3a

2013-05-04T16:32:58

refs: remove the OID/SYMBOLIC filtering Nobody should ever be using anything other than ALL at this level, so remove the option altogether. As part of this, git_reference_foreach_glob is now implemented in the frontend using an iterator. Backends will later regain the ability of doing the glob filtering in the backend.

4def7035

2013-03-02T19:31:03

refs: introduce an iterator This allows us to get a list of reference names in a loop instead of callbacks.

467cbec7

2013-05-05T16:48:34

commit: make create_from_oids() accept plain oid

75d1c8c6

2013-04-30T17:33:11

move NAME and REUC extensions to sys/

879458e7

2013-04-24T15:52:33

repo: Add `git_repository__cleanup`

21ca0451

2013-04-21T12:52:17

Move git_reference__alloc to include/git2/sys Create a new include/git2/sys/refs.h and move the reference alloc functions there. Also fix some documentation issues and some minor code cleanups.

4dcd8780

2013-04-19T17:17:44

Move refdb_backend to include/git2/sys This moves most of the refdb stuff over to the include/git2/sys directory, with some minor shifts in function organization. While I was making the necessary updates, I also removed the trailing whitespace in a few files that I modified just because I was there and it was bugging me.

9233b3de

2013-04-19T13:17:29

Move git_commit_create_from_oids into sys/commit.h Actually this renames git_commit_create_oid to git_commit_create_from_oids and moves the API declaration to include/git2/sys/commit.h since it is a dangerous API for general use (because it doesn't check that the OID list items actually refer to real objects).

1384b688

2013-04-19T13:00:12

Move some low-level repo fns to include/git2/sys

83cc70d9

2013-04-19T12:48:33

Move odb_backend implementors stuff into git2/sys This moves some of the odb_backend stuff that is related to the internals of an odb_backend implementation into include/git2/sys. Some of the stuff related to streaming I left in include/git2 because it seemed like it would be reasonably needed by a normal user who wanted to stream objects into and out of the ODB. Also, I added APIs for traversing the list of backends so that some of the tests would not need to access ODB internals.

83041c71

2013-04-19T11:52:04

Move git_config_backend to include/git2/sys Moving backend implementor objects into include/git2/sys so the APIs can be isolated from the ones that normal libgit2 users would be likely to use.

thodg/libgit2/include/git2/sys

include/git2/sys

Log