|
634a64b1
|
2008-11-22T14:04:25
|
|
Add a new author state "ign" to git.git-authors
This is to be used for application code that currently
resides in git, but only for authors whose only not
insignificant contributions are for that code (such as
"imap-send").
Presently, this is used for Mike McCormack and Robert
Shearman.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
9e300586
|
2008-11-25T16:28:51
|
|
Add Kristian Høgsberg to the list of consenting authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6e9ac9c8
|
2008-11-22T14:02:07
|
|
Add René Scharfe to git.git-authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
f2b93d41
|
2008-11-21T09:26:57
|
|
Add Matthieu Moy and Steffen Prohaska to git.git-authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
0cfd861b
|
2008-11-22T14:03:06
|
|
Add Adam Simpkins as ??? to git.git-authors
Adam has made significant contributions to the http
transport code, but his listed email address is no longer
valid.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
cc7301d8
|
2008-11-20T16:25:41
|
|
Add Sven Verdoolaege to git.git-authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6013ffa6
|
2008-11-22T15:33:15
|
|
Add $(CONFIG_H) as a build-dependency for sparse
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3e1d42b7
|
2008-11-18T22:17:40
|
|
Add a 'sparse' make target
Given the confusion on git@vger, we'd better not name
this target "check" or (worse) "test", but it's still
useful to have. As "sparse", noone should have problems
understanding what it does.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ff7c7576
|
2008-11-22T13:05:32
|
|
s/COPYING/.HEADER/ for install-headers target
We don't want to prepend the entire license; Only the
file header part of it.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
21648b45
|
2008-11-22T15:25:59
|
|
Make src/git/config.h a macro in Makefile
This makes it far more convenient to reference as a dependency
for other targets.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
4f0adcd0
|
2008-11-18T21:28:55
|
|
Get rid of GIT__PRIVATE macro
Using it in the first place means something's wrong.
This patch replaces it with an internal header which
carries the previously "protected" code instead.
Internal source-files simply include "commit.h" and
they're done. The internal header includes the public
one to make sure we always use the proper prototype.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c6ebb4a9
|
2008-11-22T15:17:17
|
|
Remove license top-comment from public header files
Since it's being added when we install the headers anyway,
we might as well get rid of it. If anything, we should point
coders to the COPYING file in the project's root directory
instead of duplicating the same (large-ish) text everywhere.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ae234862
|
2008-11-18T22:20:15
|
|
Add an embryo of a TLS-aware error handling system
This adds the per-thread global variable git_errno to the
system, which callers can examine to get information about
an error.
Two helper functions are added to reduce LoC-count for the
library code itself.
Also, some exceptions are made for running sparse on GIT_TLS
definitions, since it doesn't grok thread-local variables at
all.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3a2aabdc
|
2008-11-22T14:44:47
|
|
Add util.h - utility macros
ARRAY_SIZE() et al go in util.h, included from common.h
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
76a8c447
|
2008-11-22T14:42:12
|
|
Add internal common.h file
This one pulls in compiler compatibility macros, some
common header files, and also the public common.h header.
C source files are modified to use the private common.h
in favour of the public one.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ab3f234e
|
2008-11-22T15:35:31
|
|
Make using CFLAGS a bit simpler
This patch introduces the $(ALL_CFLAGS) variable, which holds
$(BASIC_CFLAGS) as well as userdefined $(CFLAGS) and then
consistently uses that variable where both were used anyway.
Since we're in the area, we optimize the sparse running a
bit, getting rid of the shell and just letting sparse iterate
over the files.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
f501265f
|
2008-11-22T14:40:51
|
|
Add cc-compat.h - C compiler compat macros for internal use
Holds things such as FLEX_ARRAY and whatnot.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c215be41
|
2008-11-22T14:57:40
|
|
Rename git_revpool_* functions gitrp_*
Otherwise their prototypes don't match their declarations.
Detected by 'sparse', which is obviously good to run
before each commit.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
36f0f61f
|
2008-11-18T19:06:25
|
|
Add compiler/platform agnostic thread-local storage
It doesn't cover all cases, but we can work on those as
we go along. For now, gcc, MSVC++, Intel C/C++, IBM XL C/C++,
Sun Studio C/C++ and Borland C++ Builder are the supported
compilers (although we boldly assume that they all are of
a recent enough version to support thread-local storage).
This is intended to be used in upcoming patches that implement
graceful (but TLS-dependant) error-handling in the library.
As an added bonus, we also bring the online_cpus() function
from git.git to detect the number of usable cpu's.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
a57e9a8c
|
2008-11-18T01:27:29
|
|
Add a fake and phony install-headers target
It actually does what it's supposed to (more or less),
but not very portably and not to the correct directory.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d4043ee9
|
2008-11-18T01:18:52
|
|
Move public headers to src/git
It's arguably smoother to keep them close to the source,
as that's where one's working when modifying them. More
importantly, though, is the ability to use private headers
in the src/ dir that simply include "git/$samename.h" to
get to the public API at the same time.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
1b9e92c7
|
2008-11-18T01:02:27
|
|
s/git_revp/git_revpool/
git_revp is something I personally can't stop pronouncing
"rev pointer". I'm sure others would suffer the same
problem.
Also, rename the git_revp_ sub-api "gitrp_". This is the
first of many such renames, primarily done to prevent
extreme inflation in the "git_" namespace, which we'd like
to reserve for a higher-level API.
While we're at it, we remove the noise-char "c" from a lot
of functions. Since revision walking is all about commits,
the common case should be that we're dealing with commits.
Exceptions can get a more mnemonic description as needed.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
dff79e27
|
2008-11-18T00:59:36
|
|
Rename "git_sobj" "git_obj"
The 's' never really made sense, since it's not a "small"
object at all, but rather a plain object. As such, it should
have a "plain" object name.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
257bd746
|
2008-11-18T00:58:02
|
|
Use same-directory include for public headers
It doesn't make sense to use "git/somefile.h" in the
public git headers, as it's quite likely that projects
using them will have a git directory themselves. This
alters it, making the public headers look for headers
in the same directory they themselves are in.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
eb160e94
|
2008-11-17T23:15:30
|
|
List git.git authors consenting to relicense their code
Since re-using code from git.git proper is the quick way
forward, we need to list those who have given their consent
to do just that. The relicense permission is only valid for
use with libgit2, and only for GPLv2 + gcc-exception (as
specified by 'COPYING'.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
8b6f008e
|
2008-11-03T18:53:09
|
|
Add a zlib support shell
Some versions of zlib don't have a deflateBound defined, so
we define it ourselves after including zlib.h.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
1699efc4
|
2008-11-03T18:39:37
|
|
Implement some of the basic git_odb open and close API
Far from being complete, but its a good start.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
2dbdb824
|
2008-11-03T18:38:57
|
|
Add git_fsize to the os file API
This permits us to get the size of an opened file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3e9e6909
|
2008-11-03T17:14:25
|
|
Redefine git_fread, git_fwrite to transfer the whole unit
We never want to accept a short read or a short write when
transferring data to or from a local file.
Either the entire read (or write) completes or the operation
failed and we will not recover gracefully from it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b7c891c6
|
2008-11-03T17:31:16
|
|
Add git_oid_cpy, git_oid_cmp as inline functions
These are easily built off the standard C library functions memcpy
and memcmp. By marking these inline we stand a good chance of
the C compiler replacing the entire thing with tight machine code,
because many compilers will actually inline a memcmp or memcpy when
the 3rd argument (the size) is a constant value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
367ab010
|
2008-11-03T18:19:02
|
|
Add an extra oid test to verify control characters aren't read
We only want hex digits to be read, any other character in the 8-bit
character set is invalid within an id string.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b81dd80e
|
2008-11-03T18:38:12
|
|
Change test_main to run a single test case out of the suite
By passing the name of the test function on the command line
we execute exactly that one test, and then exit successfully
if the test did not fail. This permits multiple functions in
the same .c file, so they could be called from a shell script
or debugged independently externally.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b923f2f9
|
2008-11-03T17:00:54
|
|
Fix Makefile to correctly handle 'make -j4 test'
If we have more than one test build running we cannot use the same
file for each test case; instead we need to use a per-test path so
there aren't any collisions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3b8ab0b9
|
2008-11-03T16:29:03
|
|
Fix GIT_EXTERN to actually mark the prototype as extern
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
fbbfdf9f
|
2008-11-03T16:29:56
|
|
Move GIT_NORETURN into test_lib.h only
We should never have a noreturn style function in the library
itself, as such a function would prevent the calling application
from handling error conditions the way it wants.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b3a2f90e
|
2008-11-03T18:00:49
|
|
Enable warnings by default and fix warning in oid.c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
8722a77e
|
2008-11-03T17:52:59
|
|
Correct indentation in git/odb.h
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
15bffce9
|
2008-11-01T18:14:22
|
|
Create a basic test suite for the library and test oid functions
This is a horribly simple test suite that makes it fairly easy to
put together some basic function level unit tests on the library.
Its patterned somewhat after the test suite in git.git, but also
after the "Check" test library.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
16a67770
|
2008-11-01T16:53:06
|
|
Create a micro abstraction around the POSIX file APIs
This way we can start to write IO code to read and write files in the
Git object database, but provide a hook to inject native Win32 APIs
instead so libgit2 can be ported to run natively on that platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
50298f44
|
2008-11-01T15:55:01
|
|
Switch the license from BSD to GPL+libgcc exception
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d1ea30c3
|
2008-11-01T15:42:23
|
|
Move include files to include/git/, drop git_ prefix from file names
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3e89665e
|
2008-10-31T18:34:02
|
|
Scratch the git_revp_attr configuration of a git_revp
This isn't the best idea I've head. Pierre Habouzit was suggesting
a technique of assigning a unique integer to each commit and then
allocating storage out of auxiliary pools, using the commit's unique
integer to index into any auxiliary pool in constant time. This way
both applications and the library can efficiently attach arbitrary
data onto a commit, such as rewritten parents, or flags, and have
them disconnected from the main object hash table.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6dafd056
|
2008-10-31T18:30:22
|
|
Document the return NULL style of calling convention
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6533aadc
|
2008-10-31T18:23:01
|
|
Drop the _t suffix as it is a POSIX reserved namespace
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
de2220a4
|
2008-10-31T18:16:26
|
|
Replace git_result_t with int
This seems to be preferred on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
4f9339df
|
2008-10-31T15:10:51
|
|
Hide non-exported symbols when linking the library
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
06160502
|
2008-10-31T12:30:28
|
|
Take the first stab at defining revision traversal
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
0e7fa1fe
|
2008-10-31T12:30:04
|
|
Note that comments should be doxygen javadoc style
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
13ce9f1b
|
2008-10-31T12:28:49
|
|
Fix Makefile targets to correctly depend on *.h files
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
8edc2805
|
2008-10-31T11:46:51
|
|
Correct group name of the git_odb module
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b39843f3
|
2008-10-31T11:44:00
|
|
Use wildcard to avoid listing out all source files by hand
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
7335ffc3
|
2008-10-31T11:37:58
|
|
Begin a description of our naming and coding conventions
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
29f0e90f
|
2008-10-31T11:04:48
|
|
Add _t suffix to all data types
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
bce499af
|
2008-10-31T11:01:28
|
|
Add a GIT_ prefix to OBJ_ constants to scope them better
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b51eb250
|
2008-10-31T10:55:58
|
|
Cleanup git_odb documentation formatting
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
111d5ccf
|
2008-10-31T10:56:18
|
|
Add a git_sobj_close to release the git_sobj data
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
1cd20d3a
|
2008-10-31T10:57:04
|
|
Hide git_odb's internal structure from applcation code
This way only structures we ask the caller to allocate on their
call stack or which we want to allow them to use members from
are shown in the API docs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
171aaf21
|
2008-10-31T10:55:12
|
|
Hide GIT_{BEGIN,END}_DECL from doxygen as its not part of our API
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
46d8b885
|
2008-10-31T10:43:20
|
|
Rename git_odb_sread to just git_odb_read
Most read calls will use the small object format, as the
majority of the content within the database is very small
objects (under 20 KB when inflated).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
44181c23
|
2008-10-31T10:42:32
|
|
Mark git_oid parameters const when they shouldn't be modified
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c15648cb
|
2008-10-31T09:57:29
|
|
Initial draft of libgit2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|