kmx git

Commit	Date	Message
f554611a	2014-05-06T12:41:26	Improve checks for ignore containment The diff code was using an "ignored_prefix" directory to track if a parent directory was ignored that contained untracked files alongside tracked files. Unfortunately, when negative ignore rules were used for directories inside ignored parents, the wrong rules were applied to untracked files inside the negatively ignored child directories. This commit moves the logic for ignore containment into the workdir iterator (which is a better place for it), so the ignored-ness of a directory is contained in the frame stack during traversal. This allows a child directory to override with a negative ignore and yet still restore the ignored state of the parent when we traverse out of the child. Along with this, there are some problems with "directory only" ignore rules on container directories. Given "a/*" and "!a/b/c/" (where the second rule is a directory rule but the first rule is just a generic prefix rule), then the directory only constraint was having "a/b/c/d/file" match the first rule and not the second. This was fixed by having ignore directory-only rules test a rule against the prefix of a file with LEADINGDIR enabled. Lastly, spot checks for ignores using `git_ignore_path_is_ignored` were tested from the top directory down to the bottom to deal with the containment problem, but this is wrong. We have to test bottom to top so that negative subdirectory rules will be checked before parent ignore rules. This does change the behavior of some existing tests, but it seems only to bring us more in line with core Git, so I think those changes are acceptable.
0f603132	2014-05-01T14:47:33	Improve handling of fake home directory There are a few tests that set up a fake home directory and a fake GLOBAL search path so that we can test things in global ignore or attribute or config files. This cleans up that code to work more robustly even if there is a test failure. This also fixes some valgrind warnings where scanning search paths for separators could end up doing a little bit of sketchy data access when coming to the end of search list.
9c8ed499	2014-04-29T15:05:58	Remove trace / add git_diff_perfdata struct + api
b23b112d	2014-04-29T11:29:49	Add payloads, bitmaps to trace API This is a proposed adjustment to the trace APIs. This makes the trace levels into a bitmask so that they can be selectively enabled and adds a callback-level payload, plus a message-level payload. This makes it easier for me to a GIT_TRACE_PERF callbacks that are simply bypassed if the PERF level is not set.
225aab5d	2014-04-28T16:47:39	Don't use trace if GIT_TRACE not defined
cd424ad5	2014-04-28T16:39:53	Add GIT_STATUS_OPT_UPDATE_INDEX and use trace API This adds an option to refresh the stat cache while generating status. It also rips out the GIT_PERF stuff I had an makes use of the trace API to keep statistics about what happens during diff.
8ef4e11a	2014-04-28T14:16:26	Skip diff oid calc when size definitely changed When we think the stat cache in the index seems valid and the size or mode of a file has definitely changed, then don't bother trying to recalculate the OID of the workdir bits to confirm that it is modified - just accept that it is modified. This can result in files that show as modified with no actual diff, but the behavior actually appears to match Git on the command line. This also includes a minor optimization to not perform a submodule lookup on the ".git" directory itself.
6b833e3a	2014-04-24T15:40:50	Improve docs for status rename detection limits and make tests empty on platforms without iconv support.
f608f3bb	2014-04-24T15:25:01	Test toggling core.precomposeunicode yields rename There is an interesting difference with core Git here, though. Because libgit2 will do rename detection with the working directory, in the last case where the HEAD and the working directory both have the decomposed data and the index has the composed data, we generate a single status record with two renames whereas Git will generate one rename (head to index) and one untracked file.
2334e3d8	2014-04-24T14:46:59	Test decomposed unicode renames work as expected
916fcbd6	2014-04-18T14:42:40	Fix ignore difference from git with trailing /* Ignore patterns that ended with a trailing '/' were still needing to match against another actual '/' character in the full path. This is not the same behavior as core Git. Instead, we strip a trailing '/' off of any patterns that were matching and just take it to imply the FNM_LEADING_DIR behavior.
50e46d60	2014-04-18T10:58:01	Cleanup tests with helper functions
6a0956e5	2014-04-18T10:32:35	Pop ignore only if whole relative path matches When traversing the directory structure, the iterator pushes and pops ignore files using a vector. Some directories don't have ignore files, so it uses a path comparison to decide when it is right to actually pop the last ignore file. This was only comparing directory suffixes, though, so a subdirectory with the same name as a parent could result in the parent's .gitignore being popped off the list ignores too early. This changes the logic to compare the entire relative path of the ignore file.
823c0e9c	2014-04-17T11:53:13	Fix broken logic for attr cache invalidation The checks to see if files were out of date in the attibute cache was wrong because the cache-breaker data wasn't getting stored correctly. Additionally, when the cache-breaker triggered, the old file data was being leaked.
a9528b8f	2014-04-14T15:59:48	Fix core.excludesfile named .gitignore Ignore rules with slashes in them are matched using FNM_PATHNAME and use the path to the .gitignore file from the root of the repository along with the path fragment (including slashes) in the ignore file itself. Unfortunately, the relative path to the .gitignore file was being applied to the global core.excludesfile if that was also named ".gitignore". This fixes that with more precise matching and includes test for ignore rules with leading slashes (which were the primary example of this being broken in the real world). This also backports an improvement to the file context logic from the threadsafe-iterators branch where we don't rely on mutating the key of the attribute file name to generate the context path.
06d772d8	2014-04-14T14:49:01	Merge pull request #2262 from libgit2/rb/fix-ignore-pop Fix bug popping ignore files during wd iteration
8f7bc646	2014-04-10T16:33:39	Fix bug popping ignore files during wd iteration There were a couple bugs in popping ignore files during iteration that could result in incorrect decisions be made and thus ignore files below the root either not being loaded correctly or not being popped at the right time. One bug was an off-by-one in comparing the path of the gitignore file with the path being exited during iteration. The second bug was not correctly truncating the path being tracked during traversal if there were no ignores on the list (i.e. when you have no .gitignore at the root, but do have some in contained directories).
eb7e17cc	2014-04-08T14:47:20	Update submodules with parent-tracked content This updates how libgit2 treats submodule-like directories that actually have tracked content inside of them. This is a strange corner case, but it seems that many people have abortive submodule setups and then just went ahead and added the files into the parent repository. In this case, we should just treat the submodule as if it was a normal directory. Libgit2 will still try to skip over real submodules and contained repositories that do not have tracked files inside them, but this adds some new handling for cases where the apparently submodule data is in conflict with the actual list of tracked files.
a574d584	2014-04-01T21:32:06	New tests of status for repo inside repo
a15c7802	2014-03-25T09:14:48	Make submodules externally refcounted `git_submodule` objects were already refcounted internally in case the submodule name was different from the path at which it was stored. This makes that refcounting externally used as well, so `git_submodule_lookup` and `git_submodule_add_setup` return an object that requires a `git_submodule_free` when done.
94f263f5	2014-01-25T08:04:49	Add reflog params to set-head calls
3cf11eef	2014-01-28T11:47:33	Misc cleanups
d541170c	2014-01-24T11:36:41	index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.
410a8e6f	2014-01-22T18:31:25	Sometimes a zero byte file is just a zero byte file Don't go to the ODB to resolve zero byte files in the workdir
b554ca5d	2014-01-20T15:12:06	"Uninitialized" submodules are "unmodified" Extend the "unmodified" submodule workdir test to include uninitialized submodules, to prevent reporting submodules as modified when they're not in the workdir at all.
25e0b157	2013-12-06T15:07:57	Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
17820381	2013-11-14T14:05:52	Rename tests-clar to tests

f554611a

2014-05-06T12:41:26

Improve checks for ignore containment The diff code was using an "ignored_prefix" directory to track if a parent directory was ignored that contained untracked files alongside tracked files. Unfortunately, when negative ignore rules were used for directories inside ignored parents, the wrong rules were applied to untracked files inside the negatively ignored child directories. This commit moves the logic for ignore containment into the workdir iterator (which is a better place for it), so the ignored-ness of a directory is contained in the frame stack during traversal. This allows a child directory to override with a negative ignore and yet still restore the ignored state of the parent when we traverse out of the child. Along with this, there are some problems with "directory only" ignore rules on container directories. Given "a/*" and "!a/b/c/" (where the second rule is a directory rule but the first rule is just a generic prefix rule), then the directory only constraint was having "a/b/c/d/file" match the first rule and not the second. This was fixed by having ignore directory-only rules test a rule against the prefix of a file with LEADINGDIR enabled. Lastly, spot checks for ignores using `git_ignore_path_is_ignored` were tested from the top directory down to the bottom to deal with the containment problem, but this is wrong. We have to test bottom to top so that negative subdirectory rules will be checked before parent ignore rules. This does change the behavior of some existing tests, but it seems only to bring us more in line with core Git, so I think those changes are acceptable.

0f603132

2014-05-01T14:47:33

Improve handling of fake home directory There are a few tests that set up a fake home directory and a fake GLOBAL search path so that we can test things in global ignore or attribute or config files. This cleans up that code to work more robustly even if there is a test failure. This also fixes some valgrind warnings where scanning search paths for separators could end up doing a little bit of sketchy data access when coming to the end of search list.

9c8ed499

2014-04-29T15:05:58

Remove trace / add git_diff_perfdata struct + api

b23b112d

2014-04-29T11:29:49

Add payloads, bitmaps to trace API This is a proposed adjustment to the trace APIs. This makes the trace levels into a bitmask so that they can be selectively enabled and adds a callback-level payload, plus a message-level payload. This makes it easier for me to a GIT_TRACE_PERF callbacks that are simply bypassed if the PERF level is not set.

225aab5d

2014-04-28T16:47:39

Don't use trace if GIT_TRACE not defined

cd424ad5

2014-04-28T16:39:53

Add GIT_STATUS_OPT_UPDATE_INDEX and use trace API This adds an option to refresh the stat cache while generating status. It also rips out the GIT_PERF stuff I had an makes use of the trace API to keep statistics about what happens during diff.

8ef4e11a

2014-04-28T14:16:26

Skip diff oid calc when size definitely changed When we think the stat cache in the index seems valid and the size or mode of a file has definitely changed, then don't bother trying to recalculate the OID of the workdir bits to confirm that it is modified - just accept that it is modified. This can result in files that show as modified with no actual diff, but the behavior actually appears to match Git on the command line. This also includes a minor optimization to not perform a submodule lookup on the ".git" directory itself.

6b833e3a

2014-04-24T15:40:50

Improve docs for status rename detection limits and make tests empty on platforms without iconv support.

f608f3bb

2014-04-24T15:25:01

Test toggling core.precomposeunicode yields rename There is an interesting difference with core Git here, though. Because libgit2 will do rename detection with the working directory, in the last case where the HEAD and the working directory both have the decomposed data and the index has the composed data, we generate a single status record with two renames whereas Git will generate one rename (head to index) and one untracked file.

2334e3d8

2014-04-24T14:46:59

Test decomposed unicode renames work as expected

916fcbd6

2014-04-18T14:42:40

Fix ignore difference from git with trailing /* Ignore patterns that ended with a trailing '/*' were still needing to match against another actual '/' character in the full path. This is not the same behavior as core Git. Instead, we strip a trailing '/*' off of any patterns that were matching and just take it to imply the FNM_LEADING_DIR behavior.

50e46d60

2014-04-18T10:58:01

Cleanup tests with helper functions

6a0956e5

2014-04-18T10:32:35

Pop ignore only if whole relative path matches When traversing the directory structure, the iterator pushes and pops ignore files using a vector. Some directories don't have ignore files, so it uses a path comparison to decide when it is right to actually pop the last ignore file. This was only comparing directory suffixes, though, so a subdirectory with the same name as a parent could result in the parent's .gitignore being popped off the list ignores too early. This changes the logic to compare the entire relative path of the ignore file.

823c0e9c

2014-04-17T11:53:13

Fix broken logic for attr cache invalidation The checks to see if files were out of date in the attibute cache was wrong because the cache-breaker data wasn't getting stored correctly. Additionally, when the cache-breaker triggered, the old file data was being leaked.

a9528b8f

2014-04-14T15:59:48

Fix core.excludesfile named .gitignore Ignore rules with slashes in them are matched using FNM_PATHNAME and use the path to the .gitignore file from the root of the repository along with the path fragment (including slashes) in the ignore file itself. Unfortunately, the relative path to the .gitignore file was being applied to the global core.excludesfile if that was also named ".gitignore". This fixes that with more precise matching and includes test for ignore rules with leading slashes (which were the primary example of this being broken in the real world). This also backports an improvement to the file context logic from the threadsafe-iterators branch where we don't rely on mutating the key of the attribute file name to generate the context path.

06d772d8

2014-04-14T14:49:01

Merge pull request #2262 from libgit2/rb/fix-ignore-pop Fix bug popping ignore files during wd iteration

8f7bc646

2014-04-10T16:33:39

Fix bug popping ignore files during wd iteration There were a couple bugs in popping ignore files during iteration that could result in incorrect decisions be made and thus ignore files below the root either not being loaded correctly or not being popped at the right time. One bug was an off-by-one in comparing the path of the gitignore file with the path being exited during iteration. The second bug was not correctly truncating the path being tracked during traversal if there were no ignores on the list (i.e. when you have no .gitignore at the root, but do have some in contained directories).

eb7e17cc

2014-04-08T14:47:20

Update submodules with parent-tracked content This updates how libgit2 treats submodule-like directories that actually have tracked content inside of them. This is a strange corner case, but it seems that many people have abortive submodule setups and then just went ahead and added the files into the parent repository. In this case, we should just treat the submodule as if it was a normal directory. Libgit2 will still try to skip over real submodules and contained repositories that do not have tracked files inside them, but this adds some new handling for cases where the apparently submodule data is in conflict with the actual list of tracked files.

a574d584

2014-04-01T21:32:06

New tests of status for repo inside repo

a15c7802

2014-03-25T09:14:48

Make submodules externally refcounted `git_submodule` objects were already refcounted internally in case the submodule name was different from the path at which it was stored. This makes that refcounting externally used as well, so `git_submodule_lookup` and `git_submodule_add_setup` return an object that requires a `git_submodule_free` when done.

94f263f5

2014-01-25T08:04:49

Add reflog params to set-head calls

3cf11eef

2014-01-28T11:47:33

Misc cleanups

d541170c

2014-01-24T11:36:41

index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.

410a8e6f

2014-01-22T18:31:25

Sometimes a zero byte file is just a zero byte file Don't go to the ODB to resolve zero byte files in the workdir

b554ca5d

2014-01-20T15:12:06

"Uninitialized" submodules are "unmodified" Extend the "unmodified" submodule workdir test to include uninitialized submodules, to prevent reporting submodules as modified when they're not in the workdir at all.

25e0b157

2013-12-06T15:07:57

Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.

17820381

2013-11-14T14:05:52

Rename tests-clar to tests

thodg/libgit2/tests/status

tests/status

Log