|
50186ce8
|
2018-08-26T11:26:45
|
|
Merge pull request #4374 from pks-t/pks/pack-file-verify
Pack file verification
|
|
ea9e2c1a
|
2018-07-20T13:06:56
|
|
Merge pull request #4692 from tiennou/examples/checkout
Add a checkout example
|
|
b24202e1
|
2018-07-07T12:52:24
|
|
examples: add checkout
|
|
|
e1a4a8eb
|
2018-06-25T11:58:34
|
|
cmake: enforce C90 standard
While the aim of libgit2 was to conform to C90 code, we never instructed
the compiler to enforce C90 compliance. Thus, quite a few violations
were able to get into our code base, which have been removed with the
previous commits. As we are now able to build libgit2 with C90 enforced,
we can set the C_STANDARD property for our own build targets.
Note that we explicitly avoid setting the C standard for our third-party
dependencies. At least the zlib target does not build with C90 enforced,
and we do not want to fix them by deviating from upstream. Thus we
simply enforce no standard for them.
|
|
|
c13e56f9
|
2018-06-25T14:12:53
|
|
cmake: distinguish internal and system include directories
While we want to enforce strict C90 mode, this may cause issues with
system provided header files which are themselves not strictly
conforming. E.g. if a system header has C++ style comments, a compiler
in strict C90 mode would produce an error and abort the build. As the
user most likely doesn't want to change the system header, this would
completely break the build on such systems. One example of this is
mbedtls, which provides such header files.
The problem can be worked around by distinguishing between
system-provided and project-provided include directories. When adding
include directories via "-isystem" instead of "-I", the compiler will
skip certain checks and print out less warnings. To use system includes,
we can simply add the "SYSTEM" flag to CMake's `INCLUDE_DIRECTORIES` and
`TARGET_INCLUDE_DIRECTORIES` functions. Note that we have to split the
include directories into two variables because of this, as we definitely
still want to check for all warnings produced by our own header files.
|
|
|
9994cd3f
|
2018-06-25T11:56:52
|
|
treewide: remove use of C++ style comments
C++ style comment ("//") are not specified by the ISO C90 standard and
thus do not conform to it. While libgit2 aims to conform to C90, we did
not enforce it until now, which is why quite a lot of these
non-conforming comments have snuck into our codebase. Do a tree-wide
conversion of all C++ style comments to the supported C style comments
to allow us enforcing strict C90 compliance in a later commit.
|
|
|
5b7ba786
|
2018-06-23T15:45:04
|
|
examples: add a helper for boolean-style options
|
|
|
8e063eb6
|
2018-06-23T15:44:35
|
|
examples: make the refish resolution work with short OIDs
|
|
|
8a629afe
|
2018-01-31T00:02:00
|
|
examples: move refish resolution function in common
|
|
|
c16556aa
|
2017-11-12T10:31:48
|
|
indexer: introduce options struct to `git_indexer_new`
We strive to keep an options structure to many functions to be able to
extend options in the future without breaking the API. `git_indexer_new`
doesn't have one right now, but we want to be able to add an option
for enabling strict packfile verification.
Add a new `git_indexer_options` structure and adjust callers to use
that.
|
|
|
ecf4f33a
|
2018-02-08T11:14:48
|
|
Convert usage of `git_buf_free` to new `git_buf_dispose`
|
|
|
f9cf9a04
|
2018-05-09T14:51:57
|
|
Merge pull request #4642 from pks-t/pks/cmake-resolve-pkgconfig
cmake: resolve libraries found by pkg-config
|
|
|
8ab470f5
|
2018-04-27T15:31:43
|
|
cmake: remove now-useless LIBGIT2_LIBDIRS handling
With the recent change of always resolving pkg-config libraries to their
full path, we do not have to manage the LIBGIT2_LIBDIRS variable
anymore. The only other remaining user of LIBGIT2_LIBDIRS is winhttp,
which is a CMake-style library target and can thus be resolved by CMake
automatically.
Remove the variable to simplify our build system a bit.
|
|
8aa437ef
|
2018-05-02T07:55:26
|
|
tests: ls-files: use puts instead of printf and fix typos
|
|
|
d7394c36
|
2018-03-27T07:21:02
|
|
examples: ls-files: print entry path only when entry is found
|
|
|
29ca3f33
|
2018-01-06T11:26:41
|
|
examples: ls-files: update print_paths to print all cases
|
|
|
7d079413
|
2017-12-19T15:29:40
|
|
test: ls-files: remove dependency on git_array
|
|
|
ee144650
|
2017-11-13T21:03:21
|
|
examples: ls-files: fix build error
|
|
|
e8661169
|
2017-11-13T20:52:31
|
|
examples: ls-files: address PR and style
|
|
|
3f64a9db
|
2017-10-25T19:19:17
|
|
examples: ls-files: use git_array_t to handle files
|
|
|
37cbc3ea
|
2017-10-23T09:54:39
|
|
examples: ls-files: build file list with array
|
|
d2f99e0a
|
2017-10-22T21:23:40
|
|
examples: ls-files: fix compile error
|
|
|
cd39273d
|
2017-10-22T20:43:22
|
|
examples: ls-files: fix style and refactor
|
|
|
52d83dde
|
2017-10-17T21:10:54
|
|
examples: ls-files: handle --error-unmatch
|
|
|
991fc088
|
2017-10-16T21:33:46
|
|
examples: ls-files: show current files in index
|
|
|
30e919c4
|
2017-10-16T16:46:19
|
|
examples: ls-files: list files
|
|
|
33f44db9
|
2018-01-25T22:17:39
|
|
examples: zero out our options memory before use
|
|
|
fb79d7d1
|
2018-01-17T02:34:32
|
|
examples: our/their can be NULL
|
|
|
cc845595
|
2018-01-17T02:25:36
|
|
examples: fix remaining review comments
|
|
|
5ce4f19b
|
2018-01-17T02:25:36
|
|
examples: move support code into static functions
|
|
|
503b30d5
|
2018-01-17T02:25:36
|
|
examples: hoist the merge analysis back into main
|
|
|
60c6547c
|
2018-01-17T02:25:36
|
|
examples: minor review fixups
|
|
|
59ea2c58
|
2018-01-17T02:25:36
|
|
examples: add merge
|
|
|
bb9353cf
|
2018-01-17T02:25:36
|
|
examples: Dead code & warnings
|
|
|
3fa5e577
|
2018-01-17T02:25:36
|
|
examples: Move xrealloc to common example code
|
|
|
b6720018
|
2018-01-17T02:25:36
|
|
examples: Switch to the nifty argv helpers from common
|
|
|
bf15dbf6
|
2017-11-06T12:47:40
|
|
examples: network: fix Win32 linking errors due to getline
The getline(3) function call is not part of ISO C and, most importantly,
it is not implemented on Microsoft Windows platforms. As our networking
example code makes use of getline, this breaks builds on MSVC and MinGW.
As this code wasn't built prior to the previous commit, this was never
noticed.
Fix the error by instead implementing a `readline` function, which
simply reads the password from stdin until it reads a newline
character.
|
|
9e3fb594
|
2017-10-29T15:32:18
|
|
Merge pull request #4373 from cjhoward92/examples/log-show-log-size
example-log: add support for --log-size
|
|
|
9b12eb6f
|
2017-10-20T15:05:26
|
|
examples: remove Makefile
Back in the days when libgit2 was still young, libgit2 was using plain
Makefiles as build infrastructure. We later changed that to instead use
the CMake build system to make cross-platform development easier. In the
process, we forgot to remove the Makefile from our examples directory,
which is fixed by this commit here. Furthermore, remove the accompanying
.gitignore file, which ignores build outputs. As we do out-of-tree
builds only nowadays, no output is generated in that directory anymore.
|
|
12a888d5
|
2017-10-13T07:18:54
|
|
examples: log: pass options pointer to print_commit
Cleaned up the PR to address styling issues.
|
|
|
1436b0e1
|
2017-10-11T21:47:58
|
|
example-log: add support for --log-size
|
|
f4770e47
|
2017-01-01T09:28:39
|
|
Fix Issue #4047 Check return codes and free objects
|
|
|
8e31cc25
|
2017-06-28T12:51:14
|
|
cmake: keep track of libraries and includes via lists
Later on, we will move detection of required libraries, library
directories as well as include directories into a separate
CMakeLists.txt file inside of the source directory. Obviously, we want
to avoid duplication here regarding these parameters.
To prepare for the split, put the parameters into three variables
LIBGIT2_LIBS, LIBGIT2_LIBDIRS and LIBGIT2_INCLUDES, tracking the
required libraries, linking directory as well as include directories.
These variables can later be exported into the parent scope from inside
of the source build instructions, making them readily available for the
other subdirectories.
|
|
|
f0ca00e0
|
2017-05-03T12:25:48
|
|
examples: network: refactor credentials callback
The credentials callback reads the username and password via scanf into
fixed-length arrays. While these are simply examples and as such not as
interesting, the unchecked return value of scanf causes GCC to emit
warnings. So while we're busy to shut up GCC, we also fix the possible
overflow of scanf by using getline instead.
|
|
|
f9ea8c6a
|
2017-01-12T22:02:14
|
|
examples: general: fix memory leaks
|
|
|
ed2b1c7e
|
2017-01-12T22:01:45
|
|
examples: general: display config only if it was found
|
|
|
5aa10107
|
2017-01-12T22:01:23
|
|
examples: general: narrow down scope of loop variables
|
|
|
8572e225
|
2017-01-12T22:00:53
|
|
examples: general: clean up committer/author variables
|
|
3fdba15c
|
2017-01-09T14:09:57
|
|
fix examples/network/clone.c: heap-buffer-overflow
Format of a length of string to the correct format is:%.*s
|
|
|
832278bf
|
2016-12-29T07:43:03
|
|
Fix issue #4046 Seg fault in config_files()
|
|
|
fc293919
|
2016-08-16T11:43:10
|
|
examples: add: fix type casting warning
|
|
|
5c2a8361
|
2016-08-16T11:01:09
|
|
examples: diff: parse correct types for line-diffopts
|
|
|
7314da10
|
2016-08-16T10:55:28
|
|
examples: fix warnings in network/fetch.c
|
|
|
e2d1b7ec
|
2016-08-16T10:46:35
|
|
examples: general: fix remaining warnings
|
|
|
662eee15
|
2016-08-16T10:09:52
|
|
examples: general: convert C99 comments to C90 comments
|
|
|
c313e3d9
|
2016-09-01T12:44:08
|
|
examples: general: extract function demonstrating OID parsing
|
|
|
29d9afc0
|
2016-08-16T10:06:17
|
|
examples: general: extract function demonstrating ODB
|
|
|
b009adad
|
2016-08-16T09:59:28
|
|
examples: general: extract function demonstrating commit writing
|
|
|
15960454
|
2016-08-16T09:36:31
|
|
examples: general: extract functions demonstrating object parsing
|
|
|
8b93ccdf
|
2016-08-16T09:35:08
|
|
examples: general: extract function demonstrating revwalking
|
|
|
c079e3c8
|
2016-08-16T09:32:15
|
|
examples: general: extract function demonstrating index walking
|
|
|
f9a7973d
|
2016-08-16T09:29:14
|
|
examples: general: extract function demonstrating reference listings
|
|
|
986913f4
|
2016-08-16T09:25:06
|
|
examples: general: extract function demonstrating config files
|
|
|
176d58ba
|
2016-08-16T09:17:12
|
|
examples: general: use tabs instead of spaces
|
|
07bd3e57
|
2015-05-07T12:57:56
|
|
proxy: ask the user for credentials if necessary
|
|
698e0c27
|
2016-03-07T16:34:30
|
|
Update link to Pro Git's Git internals chapter.
|
|
8b8f1f91
|
2015-10-07T14:01:05
|
|
fix return
|
|
5d7cd57f
|
2015-09-08T14:15:29
|
|
Update another call to git_remote_connect
|
|
|
97c0a85f
|
2015-07-13T11:23:07
|
|
Merge pull request #3306 from libgit2/cmn/fetch-ex-fetch
examples: modernise the fetch example
|
|
768f8be3
|
2015-06-30T19:00:41
|
|
Fix #3094 - improve use of portable size_t/ssize_t format specifiers.
The header src/cc-compat.h defines portable format specifiers PRIuZ, PRIdZ, and PRIxZ. The original report highlighted the need to use these specifiers in examples/network/fetch.c. For this commit, I checked all C source and header files not in deps/ and transitioned to the appropriate format specifier where appropriate.
|
|
|
6c7e86e1
|
2015-07-12T19:41:01
|
|
examples: modernise the fetch example
Under normal conditions, git_remote_fetch() should be the only function
used to perform a fetch. Don't let the example lead people astray.
|
|
|
d202bb7d
|
2015-06-29T21:48:35
|
|
examples: clean up some warnings
|
|
|
c2418f46
|
2015-06-25T12:48:44
|
|
Rename FALLBACK to UNSPECIFIED
Fallback describes the mechanism, while unspecified explains what the
user is thinking.
|
|
|
7d6dacdc
|
2015-05-09T10:42:00
|
|
examples: adjust to submodule status API change
|
|
9334c86f
|
2015-06-03T14:54:26
|
|
print_usage functions is defined but not used
Use the previously created function to display a message when the arguments are not valid.
ticket 3095
|
|
|
ae5b9362
|
2015-05-17T15:11:45
|
|
remote: remove fetch parameter from create_anonymous
An anonymous remote is not configured and cannot therefore have
configured refspecs. Remove the parameter which adds this from the
constructor.
|
|
|
cf66c474
|
2015-05-06T12:26:05
|
|
examples: show the sideband progress on clone
This lets us see what the server (or libgit2 locally) is doing, rather
than having to stare at a non-moving screen.
|
|
|
3fec548a
|
2015-04-23T06:01:13
|
|
examples: adjust to the new remote API
|
|
785990be
|
2015-05-02T12:16:22
|
|
Restructured to be nicer example
Code restructured to better represent best practice when
using libgit2.
|
|
9bff15f4
|
2015-04-30T15:10:28
|
|
Added call to git_libgit2_shutdown()
Added forgotten call to git_libgit2_shutdown() to the /examples/network/git2.c.
|
|
|
c843736d
|
2015-04-07T14:43:04
|
|
describe example: enable building by default.
|
|
|
0a2f99fd
|
2015-01-26T15:36:34
|
|
examples: add remote example.
|
|
|
72ca65d5
|
2015-03-03T10:07:36
|
|
Merge pull request #2808 from libgit2/cmn/repo-ident
Remove the signature from ref-modifying functions
|
|
|
659cf202
|
2015-01-07T12:23:05
|
|
Remove the signature from ref-modifying functions
The signature for the reflog is not something which changes
dynamically. Almost all uses will be NULL, since we want for the
repository's default identity to be used, making it noise.
In order to allow for changing the identity, we instead provide
git_repository_set_ident() and git_repository_ident() which allow a user
to override the choice of signature.
|
|
|
fe477951
|
2015-03-03T14:35:10
|
|
Merge pull request #2885 from JIghtuse/master
describe example: function to add commits to opts
|
|
|
14fec0ae
|
2015-02-14T12:10:00
|
|
example: drop `SAFE_CREATE` from clone example
|
|
23d1dbe9
|
2015-02-06T11:43:12
|
|
describe example: function to add commits to opts
Add safe function to (a,rea)llocate memory which terminate example on
memory allocation failure.
Move code to allocate commits to its own function.
|
|
|
2107dac3
|
2015-02-04T15:14:18
|
|
for-each-ref example: init/shutdown libgit2 in main
I don't get how it was working without git_libgit2_init() call. I run it
and libgit2 throws assertion somewhere in its internals. Now it works.
Updated commit with shutdown at the end.
|
|
|
36e13399
|
2015-01-25T22:34:46
|
|
describe example: fix memory allocation size
We need to allocate memory for sizeof(char *) * ncommits, not just for
ncommits.
Issue detected by GCC's AddressSanitizer.
|
|
|
9af3c416
|
2015-01-10T18:05:01
|
|
clone example: don't divide by zero
Local transports don't have data about the size, avoid dividing by
zero in the callback.
|
|
b874629b
|
2014-12-04T21:06:59
|
|
Spelling fixes
|
|
2e1e0f10
|
2014-11-21T17:24:55
|
|
blame: Do not assume blob contents are NULL-terminated
|
|
|
799e22ea
|
2014-10-23T17:34:41
|
|
Rename git_threads_ to git_libgit2_
This describes their purpose better, as we now initialize ssl and some
other global stuff in there. Calling the init function is not something
which has been optional for a while now.
|
|
|
209425ce
|
2014-11-08T13:25:51
|
|
remote: rename _load() to _lookup()
This brings it in line with the rest of the lookup functions.
|
|
d6bbcefc
|
2014-10-12T15:52:53
|
|
describe: add example
|
|
|
3f894205
|
2014-06-06T15:01:45
|
|
remote: allow overriding the refspecs for download and fetch
With opportunistic ref updates, git has introduced the concept of having
base refspecs *and* refspecs that are active for a particular fetch.
Let's start by letting the user override the refspecs for download.
|
|
14556cbf
|
2014-09-17T17:13:25
|
|
Merge pull request #2567 from cirosantilli/factor-41
Factor 40 and 41 constants from source.
|
|
3b2cb2c9
|
2014-09-16T11:49:25
|
|
Factor 40 and 41 constants from source.
|
|
|
2c22193b
|
2014-09-16T08:56:33
|
|
Fix typo
|
|
|
bd465f9c
|
2014-09-01T23:36:12
|
|
Fix warning
|