kmx git

Commit	Date	Message
0e60b637	2013-03-29T18:36:11	free!
ccfa6805	2013-03-25T23:58:40	Fix some diff ignores and submodule dirty workdir This started out trying to look at the problems from issue #1425 and gradually grew to a broader set of fixes. There are two core things fixed here: 1. When you had an ignore like "/bin" which is rooted at the top of your tree, instead of immediately adding the "bin/" entry as an ignored item in the diff, we were returning all of the direct descendants of the directory as ignored items. This changes things to immediately ignore the directory. Note that this effects the behavior in test_status_ignore__subdirectories so that we no longer exactly match core gits ignore behavior, but the new behavior probably makes more sense (i.e. we now will include an ignored directory inside an untracked directory that we previously would have left off). 2. When a submodule only contained working directory changes, the diff code was always considering it unmodified which was just an outright bug. The HEAD SHA of the submodule matches the SHA in the parent repo index, and since the SHAs matches, the diff code was overwriting the actual status with UNMODIFIED. These fixes broke existing tests test_diff_workdir__submodules and test_status_ignore__subdirectories but looking it over, I actually think the new results are correct and the old results were wrong. @nulltoken had actually commented on the subdirectory ignore issue previously. I also included in the tests some debugging versions of the shared iteration callback routines that print status or diff information. These aren't used actively in the tests, but can be quickly swapped in to test code to give a better picture of what is being scanned in some of the complex test scenarios.
37ee70fa	2013-03-25T22:19:39	Implement GIT_STATUS_OPT_EXCLUDE_SUBMODULES This option has been sitting unimplemented for a while, so I finally went through and implemented it along with some tests. As part of this, I improved the implementation of GIT_DIFF_IGNORE_SUBMODULES so it be more diligent about avoiding extra work and about leaving off delta records for submodules to the greatest extent possible (though it may include them still if you are request TYPECHANGE records).
0c289dd7	2013-03-25T16:40:16	Recursing into ignored dirs for diff and status This implements working versions of GIT_DIFF_RECURSE_IGNORED_DIRS and GIT_STATUS_OPT_RECURSE_IGNORED_DIRS along with some tests for the newly available behaviors. This is not turned on by default for status, but can be accessed via the options to the extended version of the command.
1098cfae	2013-03-22T14:52:29	Test fixes and cleanup This fixes some places where the new tests were leaving the test area in a bad state or were freeing data they should not free. It also removes code that is extraneous to the core issue and fixes an invalid SHA being looked up in one of the tests (which was failing, but for the wrong reason).
b8acb775	2013-03-07T22:15:40	Added some tests for issue #1397 Signed-off-by: Sven Strickroth <email@cs-ware.de>
1323c6d1	2013-03-22T14:27:56	Add cl_repo_set_bool and cleanup tests This adds a helper function for the cases where you want to quickly set a single boolean config value for a repository. This allowed me to remove a lot of code.
169dc616	2013-03-05T16:10:05	Make iterator APIs consistent with standards The iterator APIs are not currently consistent with the parameter ordering of the rest of the codebase. This rearranges the order of parameters, simplifies the naming of a number of functions, and makes somewhat better use of macros internally to clean up the iterator code. This also expands the test coverage of iterator functionality, making sure that case sensitive range-limited iteration works correctly.
c55c6244	2013-01-18T13:22:55	Fix linking error caused by ddcb28a41f3774e26fc6ae0a7174a5565e4749ce.
ddcb28a4	2013-01-17T16:56:57	Merge pull request #1239 from ethomson/index_remove add an index_remove_bypath that removes conflicts
4b181037	2013-01-08T13:39:15	Minor iterator API cleanups In preparation for further iterator changes, this cleans up a few small things in the iterator API: * removed the git_iterator_for_repo_index_range API * made git_iterator_free not be inlined * minor param name and test function name tweaks
bcbb1e20	2013-01-05T20:58:25	status: Enhance git_status_file() test coverage
25743bd7	2013-01-12T13:47:56	add an index_remove_bypath that removes conflicts, renamed add_from_workdir to match
54254a0f	2013-01-03T19:38:29	Status tests...
600d8dbf	2013-01-03T09:10:38	Move test cleanup into cleanup functions
6fef1ab3	2013-01-03T07:47:51	Tests should clean up after themselves
e05ca13f	2012-12-05T11:47:19	Merge pull request #1115 from ben/struct-versions Version info for public structs
b2414661	2012-11-28T22:43:55	status should ignore conflicts entries in the index
79cfa20d	2012-11-29T20:12:59	Deploy GIT_STATUS_OPTIONS_INIT
e2934db2	2012-11-29T02:05:46	Merge pull request #1090 from arrbee/ignore-invalid-by-default Ignore invalid entries by default
a8122b5d	2012-11-21T15:39:03	Fix warnings on Win64 build
2508cc66	2012-11-18T21:38:08	Rename ref and reflog apis for consistency
02df42dd	2012-11-19T16:33:30	Set up default internal ignores This adds "." ".." and ".git" to the internal ignores list by default - asking about paths with these files will always say that they are ignored.
331e7de9	2012-10-24T17:32:50	Extensions to rmdir and mkdir utilities * Rework GIT_DIRREMOVAL values to GIT_RMDIR flags, allowing combinations of flags * Add GIT_RMDIR_EMPTY_PARENTS flag to remove parent dirs that are left empty after removal * Add GIT_MKDIR_VERIFY_DIR to give an error if item is a file, not a dir (previously an EEXISTS error was ignored, even for files) and enable this flag for git_futils_mkpath2file call * Improve accuracy of error messages from git_futils_mkdir
f45ec1a0	2012-10-29T20:04:21	index refactoring
0ae81fc4	2012-10-17T15:30:22	index: remove read_tree() progress indicator git_index_read_tree() was exposing a parameter to provide the user with a progress indicator. Unfortunately, due to the recursive nature of the tree walk, the maximum number of items to process was unknown. Thus, the indicator was only counting processed entries, without providing any information how the number of remaining items.
8dd0bef9	2012-10-19T12:03:48	tests: Fix unused variable warning
4fd7e8e5	2012-10-18T16:52:19	status: querying a bare repo returns EBAREREPO
4c47a8bc	2012-10-17T14:14:51	Merge pull request #968 from arrbee/diff-support-typechange Support TYPECHANGE records in status and adjust checkout accordingly
70d41f6b	2012-10-16T23:42:01	Fix -Wunused-but-set-variable warning
52032ae5	2012-10-15T12:48:43	Fix single-file ignore checks To answer if a single given file should be ignored, the path to that file has to be processed progressively checking that there are no intermediate ignored directories in getting to the file in question. This enables that, fixing the broken old behavior, and adds tests to exercise various ignore situations.
0d64bef9	2012-10-05T15:56:57	Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.
aa4437f6	2012-10-09T00:51:43	Fix compiler warnings * tests-clar/status: remove an unused variable * clone: fix -Wmaybe-uninitialized warning
edb456c3	2012-10-08T16:32:43	Fix a bug where ignorecase wasn't applied to ignores
eada0762	2012-10-02T10:45:40	Merge pull request #939 from pwkelley/ignorecase Support for the core.ignorecase flag
addc9be4	2012-09-26T17:21:32	Fix error hashing empty file.
ec40b7f9	2012-09-17T15:42:41	Support for core.ignorecase
60b9d3fc	2012-09-05T15:00:40	Implement filters for status/diff blobs This adds support to diff and status for running filters (a la crlf) on blobs in the workdir before computing SHAs and before generating text diffs. This ended up being a bit more code change than I had thought since I had to reorganize some of the diff logic to minimize peak memory use when filtering blobs in a diff. This also adds a cap on the maximum size of data that will be loaded to diff. I set it at 512Mb which should match core git. Right now it is a #define in src/diff.h but it could be moved into the public API if desired.
f8e2cc9a	2012-08-31T15:53:47	Alternate test for autocrlf with status I couldn't get the last failing test to actually fail. This is a different test suggested by @nulltoken which should fail.
52462e1c	2012-05-13T10:11:13	Test case to reproduce issue #690. Staged file status does not handle CRLF correctly. Ensures that the test repo has core.autocrlf=true for the test to fail.
09fad506	2012-08-24T15:45:13	Merge pull request #852 from arrbee/submodule-extensions Submodule extensions
11684104	2012-08-24T13:41:45	Fix crash with adding internal ignores Depending on what you had done before adding new items to the internal ignores list, it was possible for the cache of ignore data to be uninitialized.
5f4a61ae	2012-08-09T19:43:25	Working implementation of git_submodule_status This is a big redesign of the git_submodule_status API and the implementation of the redesigned API. It also fixes a number of bugs that I found in other parts of the submodule API while writing the tests for the status part. This also fixes a couple of bugs in the iterators that had not been noticed before - one with iterating when there is a gitlink (i.e. separate-work-dir) and one where I was treating anything even vaguely submodule-like as a submodule, more aggressively than core git does.
aa13bf05	2012-08-02T13:00:58	Major submodule rewrite This replaces the old submodule API with a new extended API that supports most of the things that can be done with `git submodule`.
e9ca852e	2012-08-23T09:20:17	Fix warnings and merge issues on Win64
2fb4e9b3	2012-08-22T11:42:00	Wrap up ignore API and add tests This fills out the ignore API and adds tests.
f98c32f3	2012-08-19T01:26:06	Merge pull request #778 from ben/clone Clone
5dca2010	2012-08-03T17:08:01	Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.
4bf51156	2012-07-30T14:52:46	Enable stats on git_index_read_tree. Replace with the contents of git_index_read_tree_with_stats() and improve documentation comments.
0aeae705	2012-07-25T17:01:50	tests-clar/status: fix missing-prototype warning
a1773f9d	2012-07-23T18:16:09	Add flag to turn off pathspec testing for diff and status
e5e71f5e	2012-07-18T16:26:11	Add more test coverage to match default git behavior for files containing brackets
151446ca	2012-07-03T17:46:07	Add a test for getting status of files containing brackets
991a56c7	2012-07-10T15:35:38	Add flag to write gitlink on setting repo workdir This added a flag to the `git_repository_set_workdir()` function that enables generation of a `.git` gitlink file that links the new workdir to the parent repository. Essentially, the flag tells the function to write out the changes to disk to permanently set the workdir of the repository to the new path. If you pass this flag as true, then setting the workdir to something other than the default workdir (i.e. the parent of the .git repo directory), will create a plain file named ".git" with the standard gitlink contents "gitdir: <repo-path>", and also update the "core.worktree" and "core.bare" config values. Setting the workdir to the default repo workdir will clear the core.worktree flag (but still permanently set core.bare to false). BTW, the libgit2 API does not currently provide a function for clearing the workdir and converting a non-bare repo into a bare one.
cfc17dc4	2012-06-09T17:43:18	Add a test showing that git_status_file gets confused by spaces in .gitignore
0abd7244	2012-06-04T16:17:41	Fix filemode comparison in diffs File modes were both not being ignored properly on platforms where they should be ignored, nor be diffed consistently on platforms where they are supported. This change adds a number of diff and status filemode change tests. This also makes sure that filemode-only changes are included in the diff output when they occur and that filemode changes are ignored successfully when core.filemode is false. There is no code that automatically toggles core.filemode based on the capabilities of the current platform, so the user still needs to be careful in their .git/config file.
8e60c712	2012-06-07T09:50:19	Fix git_status_file for files that start with a character > 0x7f git_status_file would always return GIT_ENOTFOUND for these files. The underlying bug was that git__strcmp_cb, which is used by git_path_with_stat_cmp to sort entries in the working directory, compares strings based on unsigned chars (this is confirmed by the strcmp(3) manpage), while git__prefixcmp, which is used by workdir_iterator__entry_cmp to search for a path in the working directory, compares strings based on char. So the sort puts this path at the end of the list, while the search expects it to be at the beginning. The fix was simply to make git__prefixcmp compare using unsigned chars, just like strcmp(3). The rest of the change is just adding/updating tests.
2a99df69	2012-05-24T17:14:56	Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
6e5c4af0	2012-05-17T14:21:10	Fix workdir iterators on empty directories Creating a workdir iterator on a directory with absolutely no files was returning an error (GIT_ENOTFOUND) instead of an iterator for nothing. This fixes that and includes two new tests that cover that case.
bd4ca902	2012-05-16T17:02:06	Fix status for files under ignored dirs There was a bug where tracked files inside directories that were inside ignored directories where not being found by status. To make that a little clearer, if you have a .gitignore with: ignore/ And then have the following files: ignore/dir/tracked <-- actually a tracked file ignore/dir/untracked <-- should be ignored Then we would show the tracked file as being removed (because when we got the to contained item "dir/" inside the ignored directory, we decided it was safe to skip -- bzzt, wrong!). This update is much more careful about checking that we are not skipping over any prefix of a tracked item, regardless of whether it is ignored or not. As documented in diff.c, this commit does create behavior that still differs from core git with regards to the handling of untracked files contained inside ignored directories. With libgit2, those files will just not show up in status or diff. With core git, those files don't show up in status or diff either unless they are explicitly ignored by a .gitignore pattern in which case they show up as ignored files. Needless to say, this is a local behavior difference only, so it should not be important and (to me) the libgit2 behavior seems more consistent.
41a82592	2012-05-15T14:17:39	Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.
dc13f1f7	2012-05-10T11:08:59	Add cache busting to attribute cache This makes the git attributes and git ignores cache check stat information before using the file contents from the cache. For cached files from the index, it checks the SHA of the file instead. This should reduce the need to ever call `git_attr_cache_flush()` in most situations. This commit also fixes the `git_status_should_ignore` API to use the libgit2 standard parameter ordering.
7e000ab2	2012-05-08T15:03:59	Add support for diffing index with no HEAD When a repo is first created, there is no HEAD yet and attempting to diff files in the index was showing nothing because a tree iterator could not be constructed. This adds an "empty" iterator and falls back on that when the head cannot be looked up.
19579847	2012-05-08T13:23:00	Clean up warnings and tests
722c08af	2012-05-07T21:21:48	status: Prevent git_status_file() from returning ENOTFOUND when not applicable
f917481e	2012-05-03T16:37:25	Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.
d58336dd	2012-04-26T10:51:45	Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.
44ef8b1b	2012-04-13T13:00:10	Fix warnings on 64-bit windows builds This fixes all the warnings on win64 except those in deps, which come from the regex code.
0a20eee9	2012-04-11T03:43:30	Merge pull request #619 from nulltoken/topic/branches Basic branch management API
555aa453	2012-04-09T02:28:31	fileops: Make git_futils_mkdir_r() able to skip non-empty directories
8e8b6b01	2012-04-04T13:13:43	Clean up valgrind warnings
bfc9ca59	2012-03-28T16:45:36	Added submodule API and use in status When processing status for a newly checked out repo, it is possible that there will be submodules that have not yet been initialized. The only way to distinguish these from untracked directories is to have some knowledge of submodules. This commit adds a new submodule API which, given a name or path, can determine if it appears to be a submodule and can give information about the submodule.
277e3041	2012-03-26T11:22:27	Fix handling of submodules in trees
c8838ee9	2012-03-23T11:03:01	Restore default status recursion behavior This gives `git_status_foreach()` back its old behavior of emulating the "--untracked=all" behavior of git. You can get any of the various --untracked options by passing flags to `git_status_foreach_ext()` but the basic version will keep the behavior it has always had.
4b136a94	2012-03-23T09:26:09	Fix crash in new status and add recurse option This fixes the bug that @nulltoken found (thank you!) where if there were untracked directories alphabetically after the last tracked item, the diff implementation would deref a NULL pointer. The fix involved the code which decides if it is necessary to recurse into a directory in the working dir, so it was easy to add a new option `GIT_STATUS_OPT_RECURSE_UNTRACKED_DIRS` to control if the contents of untracked directories should be included in status.
98c4613e	2012-03-22T13:10:23	Migrate remaining status tests to Clar This finishes up the migration of remaining tests from tests/t18-status.c over the tests-clar/status/worktree.c.
a56aacf4	2012-03-22T12:03:30	More status testing This "fixes" the broken t18 status tests to accurately reflect the new behavior for "created" untracked subdirectories. See discussion in the PR for more details. This also contains the submodules unit test that I forgot to git add, and ports most of the t18-status.c tests to clar (still missing a couple of the git_status_file() single file tests).
95340398	2012-03-22T09:17:34	Adding new tests for new status command This is a work in progress. This adds two new sets of tests, the issue_592 tests from @nulltoken's pull request #601 and some new tests for submodules. The submodule tests still have issues where the status is not reported correctly. That needs to be fixed before merge.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
e1bcc191	2012-03-01T11:45:00	Revert GIT_STATUS constants to avoid issues This reverts the changes to the GIT_STATUS constants and adds a new enumeration to describe the type of change in a git_diff_delta. I don't love this solution, but it should prevent strange errors from occurring for now. Eventually, I would like to unify the various status constants, but it needs a larger plan and I just wanted to eliminate this breakage quickly.
854eccbb	2012-02-29T12:04:59	Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing count++ but meant to do (count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.
74fa4bfa	2012-02-28T16:14:47	Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.
e8c96ed2	2012-02-01T12:30:35	Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.
3fd1520c	2012-01-24T20:35:15	Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

0e60b637

2013-03-29T18:36:11

free!

ccfa6805

2013-03-25T23:58:40

Fix some diff ignores and submodule dirty workdir This started out trying to look at the problems from issue #1425 and gradually grew to a broader set of fixes. There are two core things fixed here: 1. When you had an ignore like "/bin" which is rooted at the top of your tree, instead of immediately adding the "bin/" entry as an ignored item in the diff, we were returning all of the direct descendants of the directory as ignored items. This changes things to immediately ignore the directory. Note that this effects the behavior in test_status_ignore__subdirectories so that we no longer exactly match core gits ignore behavior, but the new behavior probably makes more sense (i.e. we now will include an ignored directory inside an untracked directory that we previously would have left off). 2. When a submodule only contained working directory changes, the diff code was always considering it unmodified which was just an outright bug. The HEAD SHA of the submodule matches the SHA in the parent repo index, and since the SHAs matches, the diff code was overwriting the actual status with UNMODIFIED. These fixes broke existing tests test_diff_workdir__submodules and test_status_ignore__subdirectories but looking it over, I actually think the new results are correct and the old results were wrong. @nulltoken had actually commented on the subdirectory ignore issue previously. I also included in the tests some debugging versions of the shared iteration callback routines that print status or diff information. These aren't used actively in the tests, but can be quickly swapped in to test code to give a better picture of what is being scanned in some of the complex test scenarios.

37ee70fa

2013-03-25T22:19:39

Implement GIT_STATUS_OPT_EXCLUDE_SUBMODULES This option has been sitting unimplemented for a while, so I finally went through and implemented it along with some tests. As part of this, I improved the implementation of GIT_DIFF_IGNORE_SUBMODULES so it be more diligent about avoiding extra work and about leaving off delta records for submodules to the greatest extent possible (though it may include them still if you are request TYPECHANGE records).

0c289dd7

2013-03-25T16:40:16

Recursing into ignored dirs for diff and status This implements working versions of GIT_DIFF_RECURSE_IGNORED_DIRS and GIT_STATUS_OPT_RECURSE_IGNORED_DIRS along with some tests for the newly available behaviors. This is not turned on by default for status, but can be accessed via the options to the extended version of the command.

1098cfae

2013-03-22T14:52:29

Test fixes and cleanup This fixes some places where the new tests were leaving the test area in a bad state or were freeing data they should not free. It also removes code that is extraneous to the core issue and fixes an invalid SHA being looked up in one of the tests (which was failing, but for the wrong reason).

b8acb775

2013-03-07T22:15:40

Added some tests for issue #1397 Signed-off-by: Sven Strickroth <email@cs-ware.de>

1323c6d1

2013-03-22T14:27:56

Add cl_repo_set_bool and cleanup tests This adds a helper function for the cases where you want to quickly set a single boolean config value for a repository. This allowed me to remove a lot of code.

169dc616

2013-03-05T16:10:05

Make iterator APIs consistent with standards The iterator APIs are not currently consistent with the parameter ordering of the rest of the codebase. This rearranges the order of parameters, simplifies the naming of a number of functions, and makes somewhat better use of macros internally to clean up the iterator code. This also expands the test coverage of iterator functionality, making sure that case sensitive range-limited iteration works correctly.

c55c6244

2013-01-18T13:22:55

Fix linking error caused by ddcb28a41f3774e26fc6ae0a7174a5565e4749ce.

ddcb28a4

2013-01-17T16:56:57

Merge pull request #1239 from ethomson/index_remove add an index_remove_bypath that removes conflicts

4b181037

2013-01-08T13:39:15

Minor iterator API cleanups In preparation for further iterator changes, this cleans up a few small things in the iterator API: * removed the git_iterator_for_repo_index_range API * made git_iterator_free not be inlined * minor param name and test function name tweaks

bcbb1e20

2013-01-05T20:58:25

status: Enhance git_status_file() test coverage

25743bd7

2013-01-12T13:47:56

add an index_remove_bypath that removes conflicts, renamed add_from_workdir to match

54254a0f

2013-01-03T19:38:29

Status tests...

600d8dbf

2013-01-03T09:10:38

Move test cleanup into cleanup functions

6fef1ab3

2013-01-03T07:47:51

Tests should clean up after themselves

e05ca13f

2012-12-05T11:47:19

Merge pull request #1115 from ben/struct-versions Version info for public structs

b2414661

2012-11-28T22:43:55

status should ignore conflicts entries in the index

79cfa20d

2012-11-29T20:12:59

Deploy GIT_STATUS_OPTIONS_INIT

e2934db2

2012-11-29T02:05:46

Merge pull request #1090 from arrbee/ignore-invalid-by-default Ignore invalid entries by default

a8122b5d

2012-11-21T15:39:03

Fix warnings on Win64 build

2508cc66

2012-11-18T21:38:08

Rename ref and reflog apis for consistency

02df42dd

2012-11-19T16:33:30

Set up default internal ignores This adds "." ".." and ".git" to the internal ignores list by default - asking about paths with these files will always say that they are ignored.

331e7de9

2012-10-24T17:32:50

Extensions to rmdir and mkdir utilities * Rework GIT_DIRREMOVAL values to GIT_RMDIR flags, allowing combinations of flags * Add GIT_RMDIR_EMPTY_PARENTS flag to remove parent dirs that are left empty after removal * Add GIT_MKDIR_VERIFY_DIR to give an error if item is a file, not a dir (previously an EEXISTS error was ignored, even for files) and enable this flag for git_futils_mkpath2file call * Improve accuracy of error messages from git_futils_mkdir

f45ec1a0

2012-10-29T20:04:21

index refactoring

0ae81fc4

2012-10-17T15:30:22

index: remove read_tree() progress indicator git_index_read_tree() was exposing a parameter to provide the user with a progress indicator. Unfortunately, due to the recursive nature of the tree walk, the maximum number of items to process was unknown. Thus, the indicator was only counting processed entries, without providing any information how the number of remaining items.

8dd0bef9

2012-10-19T12:03:48

tests: Fix unused variable warning

4fd7e8e5

2012-10-18T16:52:19

status: querying a bare repo returns EBAREREPO

4c47a8bc

2012-10-17T14:14:51

Merge pull request #968 from arrbee/diff-support-typechange Support TYPECHANGE records in status and adjust checkout accordingly

70d41f6b

2012-10-16T23:42:01

Fix -Wunused-but-set-variable warning

52032ae5

2012-10-15T12:48:43

Fix single-file ignore checks To answer if a single given file should be ignored, the path to that file has to be processed progressively checking that there are no intermediate ignored directories in getting to the file in question. This enables that, fixing the broken old behavior, and adds tests to exercise various ignore situations.

0d64bef9

2012-10-05T15:56:57

Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.

aa4437f6

2012-10-09T00:51:43

Fix compiler warnings * tests-clar/status: remove an unused variable * clone: fix -Wmaybe-uninitialized warning

edb456c3

2012-10-08T16:32:43

Fix a bug where ignorecase wasn't applied to ignores

eada0762

2012-10-02T10:45:40

Merge pull request #939 from pwkelley/ignorecase Support for the core.ignorecase flag

addc9be4

2012-09-26T17:21:32

Fix error hashing empty file.

ec40b7f9

2012-09-17T15:42:41

Support for core.ignorecase

60b9d3fc

2012-09-05T15:00:40

Implement filters for status/diff blobs This adds support to diff and status for running filters (a la crlf) on blobs in the workdir before computing SHAs and before generating text diffs. This ended up being a bit more code change than I had thought since I had to reorganize some of the diff logic to minimize peak memory use when filtering blobs in a diff. This also adds a cap on the maximum size of data that will be loaded to diff. I set it at 512Mb which should match core git. Right now it is a #define in src/diff.h but it could be moved into the public API if desired.

f8e2cc9a

2012-08-31T15:53:47

Alternate test for autocrlf with status I couldn't get the last failing test to actually fail. This is a different test suggested by @nulltoken which should fail.

52462e1c

2012-05-13T10:11:13

Test case to reproduce issue #690. Staged file status does not handle CRLF correctly. Ensures that the test repo has core.autocrlf=true for the test to fail.

09fad506

2012-08-24T15:45:13

Merge pull request #852 from arrbee/submodule-extensions Submodule extensions

11684104

2012-08-24T13:41:45

Fix crash with adding internal ignores Depending on what you had done before adding new items to the internal ignores list, it was possible for the cache of ignore data to be uninitialized.

5f4a61ae

2012-08-09T19:43:25

Working implementation of git_submodule_status This is a big redesign of the git_submodule_status API and the implementation of the redesigned API. It also fixes a number of bugs that I found in other parts of the submodule API while writing the tests for the status part. This also fixes a couple of bugs in the iterators that had not been noticed before - one with iterating when there is a gitlink (i.e. separate-work-dir) and one where I was treating anything even vaguely submodule-like as a submodule, more aggressively than core git does.

aa13bf05

2012-08-02T13:00:58

Major submodule rewrite This replaces the old submodule API with a new extended API that supports most of the things that can be done with `git submodule`.

e9ca852e

2012-08-23T09:20:17

Fix warnings and merge issues on Win64

2fb4e9b3

2012-08-22T11:42:00

Wrap up ignore API and add tests This fills out the ignore API and adds tests.

f98c32f3

2012-08-19T01:26:06

Merge pull request #778 from ben/clone Clone

5dca2010

2012-08-03T17:08:01

Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.

4bf51156

2012-07-30T14:52:46

Enable stats on git_index_read_tree. Replace with the contents of git_index_read_tree_with_stats() and improve documentation comments.

0aeae705

2012-07-25T17:01:50

tests-clar/status: fix missing-prototype warning

a1773f9d

2012-07-23T18:16:09

Add flag to turn off pathspec testing for diff and status

e5e71f5e

2012-07-18T16:26:11

Add more test coverage to match default git behavior for files containing brackets

151446ca

2012-07-03T17:46:07

Add a test for getting status of files containing brackets

991a56c7

2012-07-10T15:35:38

Add flag to write gitlink on setting repo workdir This added a flag to the `git_repository_set_workdir()` function that enables generation of a `.git` gitlink file that links the new workdir to the parent repository. Essentially, the flag tells the function to write out the changes to disk to permanently set the workdir of the repository to the new path. If you pass this flag as true, then setting the workdir to something other than the default workdir (i.e. the parent of the .git repo directory), will create a plain file named ".git" with the standard gitlink contents "gitdir: <repo-path>", and also update the "core.worktree" and "core.bare" config values. Setting the workdir to the default repo workdir will clear the core.worktree flag (but still permanently set core.bare to false). BTW, the libgit2 API does not currently provide a function for clearing the workdir and converting a non-bare repo into a bare one.

cfc17dc4

2012-06-09T17:43:18

Add a test showing that git_status_file gets confused by spaces in .gitignore

0abd7244

2012-06-04T16:17:41

Fix filemode comparison in diffs File modes were both not being ignored properly on platforms where they should be ignored, nor be diffed consistently on platforms where they are supported. This change adds a number of diff and status filemode change tests. This also makes sure that filemode-only changes are included in the diff output when they occur and that filemode changes are ignored successfully when core.filemode is false. There is no code that automatically toggles core.filemode based on the capabilities of the current platform, so the user still needs to be careful in their .git/config file.

8e60c712

2012-06-07T09:50:19

Fix git_status_file for files that start with a character > 0x7f git_status_file would always return GIT_ENOTFOUND for these files. The underlying bug was that git__strcmp_cb, which is used by git_path_with_stat_cmp to sort entries in the working directory, compares strings based on unsigned chars (this is confirmed by the strcmp(3) manpage), while git__prefixcmp, which is used by workdir_iterator__entry_cmp to search for a path in the working directory, compares strings based on char. So the sort puts this path at the end of the list, while the search expects it to be at the beginning. The fix was simply to make git__prefixcmp compare using unsigned chars, just like strcmp(3). The rest of the change is just adding/updating tests.

2a99df69

2012-05-24T17:14:56

Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

6e5c4af0

2012-05-17T14:21:10

Fix workdir iterators on empty directories Creating a workdir iterator on a directory with absolutely no files was returning an error (GIT_ENOTFOUND) instead of an iterator for nothing. This fixes that and includes two new tests that cover that case.

bd4ca902

2012-05-16T17:02:06

Fix status for files under ignored dirs There was a bug where tracked files inside directories that were inside ignored directories where not being found by status. To make that a little clearer, if you have a .gitignore with: ignore/ And then have the following files: ignore/dir/tracked <-- actually a tracked file ignore/dir/untracked <-- should be ignored Then we would show the tracked file as being removed (because when we got the to contained item "dir/" inside the ignored directory, we decided it was safe to skip -- bzzt, wrong!). This update is much more careful about checking that we are not skipping over any prefix of a tracked item, regardless of whether it is ignored or not. As documented in diff.c, this commit does create behavior that still differs from core git with regards to the handling of untracked files contained inside ignored directories. With libgit2, those files will just not show up in status or diff. With core git, those files don't show up in status or diff either *unless* they are explicitly ignored by a .gitignore pattern in which case they show up as ignored files. Needless to say, this is a local behavior difference only, so it should not be important and (to me) the libgit2 behavior seems more consistent.

41a82592

2012-05-15T14:17:39

Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.

dc13f1f7

2012-05-10T11:08:59

Add cache busting to attribute cache This makes the git attributes and git ignores cache check stat information before using the file contents from the cache. For cached files from the index, it checks the SHA of the file instead. This should reduce the need to ever call `git_attr_cache_flush()` in most situations. This commit also fixes the `git_status_should_ignore` API to use the libgit2 standard parameter ordering.

7e000ab2

2012-05-08T15:03:59

Add support for diffing index with no HEAD When a repo is first created, there is no HEAD yet and attempting to diff files in the index was showing nothing because a tree iterator could not be constructed. This adds an "empty" iterator and falls back on that when the head cannot be looked up.

19579847

2012-05-08T13:23:00

Clean up warnings and tests

722c08af

2012-05-07T21:21:48

status: Prevent git_status_file() from returning ENOTFOUND when not applicable

f917481e

2012-05-03T16:37:25

Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.

d58336dd

2012-04-26T10:51:45

Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.

44ef8b1b

2012-04-13T13:00:10

Fix warnings on 64-bit windows builds This fixes all the warnings on win64 except those in deps, which come from the regex code.

0a20eee9

2012-04-11T03:43:30

Merge pull request #619 from nulltoken/topic/branches Basic branch management API

555aa453

2012-04-09T02:28:31

fileops: Make git_futils_mkdir_r() able to skip non-empty directories

8e8b6b01

2012-04-04T13:13:43

Clean up valgrind warnings

bfc9ca59

2012-03-28T16:45:36

Added submodule API and use in status When processing status for a newly checked out repo, it is possible that there will be submodules that have not yet been initialized. The only way to distinguish these from untracked directories is to have some knowledge of submodules. This commit adds a new submodule API which, given a name or path, can determine if it appears to be a submodule and can give information about the submodule.

277e3041

2012-03-26T11:22:27

Fix handling of submodules in trees

c8838ee9

2012-03-23T11:03:01

Restore default status recursion behavior This gives `git_status_foreach()` back its old behavior of emulating the "--untracked=all" behavior of git. You can get any of the various --untracked options by passing flags to `git_status_foreach_ext()` but the basic version will keep the behavior it has always had.

4b136a94

2012-03-23T09:26:09

Fix crash in new status and add recurse option This fixes the bug that @nulltoken found (thank you!) where if there were untracked directories alphabetically after the last tracked item, the diff implementation would deref a NULL pointer. The fix involved the code which decides if it is necessary to recurse into a directory in the working dir, so it was easy to add a new option `GIT_STATUS_OPT_RECURSE_UNTRACKED_DIRS` to control if the contents of untracked directories should be included in status.

98c4613e

2012-03-22T13:10:23

Migrate remaining status tests to Clar This finishes up the migration of remaining tests from tests/t18-status.c over the tests-clar/status/worktree.c.

a56aacf4

2012-03-22T12:03:30

More status testing This "fixes" the broken t18 status tests to accurately reflect the new behavior for "created" untracked subdirectories. See discussion in the PR for more details. This also contains the submodules unit test that I forgot to git add, and ports most of the t18-status.c tests to clar (still missing a couple of the git_status_file() single file tests).

95340398

2012-03-22T09:17:34

Adding new tests for new status command This is a work in progress. This adds two new sets of tests, the issue_592 tests from @nulltoken's pull request #601 and some new tests for submodules. The submodule tests still have issues where the status is not reported correctly. That needs to be fixed before merge.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

e1bcc191

2012-03-01T11:45:00

Revert GIT_STATUS constants to avoid issues This reverts the changes to the GIT_STATUS constants and adds a new enumeration to describe the type of change in a git_diff_delta. I don't love this solution, but it should prevent strange errors from occurring for now. Eventually, I would like to unify the various status constants, but it needs a larger plan and I just wanted to eliminate this breakage quickly.

854eccbb

2012-02-29T12:04:59

Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing *count++ but meant to do (*count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.

74fa4bfa

2012-02-28T16:14:47

Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.

e8c96ed2

2012-02-01T12:30:35

Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.

3fd1520c

2012-01-24T20:35:15

Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

thodg/libgit2/tests-clar/status

tests-clar/status

Log