kmx git

Commit	Date	Message
326c9fc2	2015-12-01T20:41:23	checkout test: Apply umask to file-mode test as well Fix the file-mode test to expect system umask being applied to the created file as well (it is currently applied to the directory only). This fixes the test on systems where umask != 022. Signed-off-by: Michał Górny <mgorny@gentoo.org>
87428c55	2015-11-20T20:48:51	Fix some warnings
de999f26	2015-11-13T15:36:45	checkout::crlf test: don't crash when no idx entry When there's no matching index entry (for whatever reason), don't try to dereference the null return value to get at the id. Otherwise when we break something in the index API, the checkout test crashes for confusing reasons and causes us to step through it in a debugger thinking that we had broken much more than we actually did.
0226f7dd	2015-08-29T13:59:20	diff/index: respect USE_NSEC for racily clean file detection
ac2fba0e	2015-09-16T15:07:27	git_futils_mkdir_*: make a relative-to-base mkdir Untangle git_futils_mkdir from git_futils_mkdir_ext - the latter assumes that we own everything beneath the base, as if it were being called with a base of the repository or working directory, and is tailored towards checkout and ensuring that there is no bogosity beneath the base that must be cleaned up. This is (at best) slow and (at worst) unsafe in the larger context of a filesystem where we do not own things and cannot do things like unlink symlinks that are in our way.
eea7c850	2015-09-16T05:44:27	checkout: overwrite files with differing modes When a file exists on disk and we're checking out a file that differs in executableness, remove the old file. This allows us to recreate the new file with p_open, which will take the new mode into account and handle setting the umask properly. Remove any notion of chmod'ing existing files, since it is now handled by the aforementioned removal and was incorrect, as it did not take umask into account.
6fe32284	2015-09-16T10:17:54	checkout::tree tests: don't use hardcoded mode
b4d183a7	2015-09-16T04:12:47	checkout::tree tests: don't use static buffer
33cad995	2015-06-01T14:31:49	Check that checkout preserves filemode in working directory.
6124d983	2015-06-01T11:16:36	Check that an executable in index is not an executable after checkout.
504b0697	2015-06-30T14:25:00	checkout test: mark unused vars
64c415c2	2015-06-29T22:12:20	checkout test: check getcwd return value
afd8a94e	2015-06-26T18:49:39	checkout: plug a few leaks
1e46d545	2015-06-09T03:50:00	crlf tests: ensure that Unix obeys autocrlf=true All platforms do terrible, horrible, no good, very bad translation when core.autocrlf=true. It's not just Windows!
3d92b9ab	2015-06-08T09:08:01	crlf tests: use known-good data produced by git Given a variety of combinations of core.autocrlf settings and attributes settings, test that we check out data into the working directory the same as a known-good test resource created by git.git.
bd5e59ee	2015-06-08T09:04:39	crlf: include utf8 resources in master branch Include the UTF8 and UTF8 BOM tests in the master crlf test branch for completeness.
863dd89a	2015-06-18T12:45:40	tests: tick over five seconds instead of one When ticking over one second, it can happen that the actual time ticks over the same second between the time that we undermine our own race protections and the time in which we perform the index update. Such timing would make the time in the entries match the index' timestamp and we have not gained anything. Ticking over five seconds makes it so that if real-time rolls over that second, our index is still ahead. This is still suboptimal as we're dealing with timing, but five seconds should be long enough for any reasonable test runner to finish the tests.
85a5e8eb	2015-06-17T09:00:23	Fixed Xcode 6.1 build warnings
121c3171	2015-06-16T15:18:04	Introduce p_utimes and p_futimes Provide functionality to set the time on a filesystem entry, using utimes or futimes on POSIX type systems or SetFileTime on Win32.
e44abe16	2015-06-16T08:51:45	tests: tick the index when we count OID calculations These tests want to test that we don't recalculate entries which match the index already. This is however something we force when truncating racily-clean entries. Tick the index forward as we know that we don't perform the modifications which the racily-clean code is trying to avoid.
c4e6ab5f	2015-06-15T14:32:08	crlf: tick the index forward to work around racy-git behaviour In order to avoid racy-git, we zero out the file size for entries with the same timestamp as the index (or during the initial checkout). This is the case in a couple of crlf tests, as the code is fast enough to do everything in the same second. As we know that we do not perform the modification just after writing out the index, which is what this is designed to work around, tick the mtime of the index file such that it doesn't agree with the files anymore, and we do not zero out these entries.
26d5c0b8	2015-06-12T09:28:47	Fix leaks in tests/checkout/icase
885b94aa	2015-05-28T15:26:13	Rename GIT_EMERGECONFLICT to GIT_ECONFLICT We do not error on "merge conflicts"; on the contrary, merge conflicts are a normal part of merging. We only error on "checkout conflicts", where a change exists in the index or the working directory that would otherwise be overwritten by performing the checkout. This may happen during merge (after the production of the new index that we're going to checkout) but it could happen during any checkout.
2f1080ea	2015-05-19T11:17:07	conflict tests: use GIT_IDXENTRY_STAGE_SET
1ecbcd8e	2015-05-26T19:16:27	Fix ident replacement to match Git behavior Git inserts a space after the SHA1 (as of 2.1.4 at least), so do the same.
8f0104ec	2015-04-21T22:10:36	Remove the callbacks struct from the remote Having the setting be different from calling its actions was not a great idea and made for the sake of the wrong convenience. Instead of that, accept either fetch options, push options or the callbacks when dealing with the remote. The fetch options are currently only the callbacks, but more options will be moved from setters and getters on the remote to the options. This does mean passing the same struct along the different functions but the typical use-case will only call git_remote_fetch() or git_remote_push() and so won't notice much difference.
cd79d99a	2015-04-23T15:58:53	checkout test: better case-insensitive test on Mac On Mac OS, `realpath` is deficient in determining the actual filename on-disk as it will simply provide the string you gave it if that file exists, instead of returning the filename as it exists. Instead we must read the directory entries for the parent directory to get the canonical filename.
64842d87	2015-04-23T09:21:33	checkout test: only run icase on icase platform
05f69012	2015-03-31T16:28:13	checkout: remove blocking dir when FORCEd
3520c970	2015-03-27T15:39:28	Revert "Always checkout with case sensitive iterator" This reverts commit 40d791545abfb3cb71553a27dc64129e1a9bec28.
6dfd8506	2015-04-01T15:23:37	checkout test: ensure we write to casechanged dir Ensure that on a case insensitive filesystem that we can checkout into some folder 'FOLDER' that exists on disk, even if the target of the checkout is a different case (eg 'folder').
431f9807	2015-03-27T15:33:44	checkout test: ignore unstaged case-changing renames On Windows, you might sloppily rewrite a file (or have a sloppy text editor that does it for you) and accidentally change its case. (eg, "README" -> "readme"). Git ignores this accidental case changing rename during checkout and will happily write the new content to the file despite the name change. We should, too.
27fa7477	2015-04-23T10:54:08	Merge pull request #3032 from jfultz/index-file-modes Fix git_checkout_tree() to do index filemodes correctly on Windows.
63af449e	2015-04-10T11:33:14	Merge pull request #3030 from linquize/symlink_supported If work_dir is not specified, use repo_dir to test if symlink is supported
67db2bde	2015-03-10T12:02:45	Fix git_checkout_tree() to do index filemodes correctly on Windows. git_checkout_tree() has some fallback behaviors for file systems which don't have full support of filemodes. Generally works fine, but if a given file had a change of type from a 0644 to 0755 (i.e., you add executable permissions), the fallback behavior incorrectly triggers when writing hte updated index. This would cause a git_checkout_tree() command, even with the GIT_CHECKOUT_FORCE option set, to leave a dirty index on Windows. Also added checks to an existing test to catch this case.
7c2a2172	2015-04-04T00:29:01	Test: Create repo in while current dir is readonly and checkout symlink
7c2b9e06	2015-03-22T19:06:53	Illustrate bad checkout on Windows
118e6fdc	2015-03-16T23:08:16	Lower case the include directive of windows header Since the Linux platform has a case sensitive file system, the header name should be lower case for cross compiling purposes. (On Linux, the mingw header is called ```windows.h```).
76f03418	2015-03-03T17:04:38	Remove swp files
4e498646	2015-01-15T16:50:31	repository: remove log message override for switching the active branch We want to use the "checkout: moving from ..." message in order to let git know when a change of branch has happened. Make the convenience functions for this goal write this message.
6bfb990d	2015-01-07T14:47:02	branch: don't accept a reflog message override This namespace is about behaving like git's branch command, so let's do exactly that instead of taking a reflog message. This override is still available via the reference namespace.
23a17803	2015-01-07T14:16:50	reset: remove reflog message override This function is meant to simulate what git does in the reset command, so we should include the reflog message in that.
659cf202	2015-01-07T12:23:05	Remove the signature from ref-modifying functions The signature for the reflog is not something which changes dynamically. Almost all uses will be NULL, since we want for the repository's default identity to be used, making it noise. In order to allow for changing the identity, we instead provide git_repository_set_ident() and git_repository_ident() which allow a user to override the choice of signature.
496b76d4	2015-02-27T11:02:37	checkout tests: just use SAFE where appropriate
96b82b11	2015-02-14T11:44:05	checkout: remove `GIT_CHECKOUT_SAFE_CREATE` as a strategy
e6da3e44	2015-02-14T10:33:06	checkout: upgrade to `SAFE_CREATE` when no index file When the repository does not contain an index, emulate git's behavior and upgrade to `SAFE_CREATE`. This allows us to check out repositories created with `git clone --no-checkout`.
8639ea5f	2015-01-17T22:47:03	checkout: introduce GIT_CHECKOUT_DONT_WRITE_INDEX
d24a5312	2015-02-12T02:34:58	Merge pull request #2866 from ethomson/checkout_perf2 Checkout performance
fa89ff20	2015-02-03T05:35:24	remove some unused warnings
07c989e9	2015-02-03T20:01:24	win32: further cleanups for 8.3 disabling
5f28ec84	2015-02-03T12:16:11	win32: cleanup 8.3 disabled tests
2fbce0bf	2015-02-02T22:18:38	checkout test: ensure .gitattributes lifecycle The .gitattributes cache should not reload .gitattributes in the middle of checking out, only between checkout operations. Otherwise, we'll spend all our time stat'ing and read'ing the gitattributes.
9dcc4a36	2015-01-28T23:04:50	Fix test failures when 8.3 is disabled
e0902fbc	2015-01-15T17:17:01	checkout tests: cleanup realpath impl on Win32
53eb139d	2015-01-14T20:16:01	checkout tests: emulate p_realpath poorly on Win32
e74340b0	2015-01-14T18:47:00	checkout: remove files before writing new ones On case insensitive filesystems, we may have files in the working directory that case fold to a name we want to write. Remove those files (by default) so that we will not end up with a filename that has the unexpected case.
232bc895	2015-01-14T13:15:34	checkout tests: nasty symlinks Symbolic links that abuse case insensitivity to write into .git.
1d50b364	2015-01-12T16:16:27	checkout: introduce git_checkout_perfdata Checkout can now provide performance data about the number of (some) syscalls performed using an optional callback.
b4c6a9da	2014-10-26T05:45:23	Add files and tests with many UTF-8 chars and few UTF-8 chars
c4a2fd5c	2015-01-04T17:39:43	Plug a couple of leaks
40d79154	2014-05-09T19:32:52	Always checkout with case sensitive iterator On a case-insensitive filesystem, we need to deal with case-changing renames (eg, foo -> FOO) by removing the old and adding the new, exactly as if we were on a case-sensitive filesystem. Update the `checkout::tree::can_cancel_checkout_from_notify` test, now that notifications are always sent case sensitively.
61ee5b0e	2014-05-08T17:35:03	Introduce test for checkout case-changing rename
ec74b40c	2014-12-16T18:53:55	Introduce core.protectHFS and core.protectNTFS Validate HFS ignored char ".git" paths when `core.protectHFS` is specified. Validate NTFS invalid ".git" paths when `core.protectNTFS` is specified.
11d67b75	2014-12-10T19:12:16	checkout: disallow bad paths on HFS HFS filesystems ignore some characters like U+200C. When these characters are included in a path, they will be ignored for the purposes of comparison with other paths. Thus, if you have a ".git" folder, a folder of ".git<U+200C>" will also match. Protect our ".git" folder by ensuring that ".git<U+200C>" and friends do not match it.
a64119e3	2014-11-25T18:13:00	checkout: disallow bad paths on win32 Disallow: 1. paths with trailing dot 2. paths with trailing space 3. paths with trailing colon 4. paths that are 8.3 short names of .git folders ("GIT~1") 5. paths that are reserved path names (COM1, LPT1, etc). 6. paths with reserved DOS characters (colons, asterisks, etc) These paths would (without \\?\ syntax) be elided to other paths - for example, ".git." would be written as ".git". As a result, writing these paths literally (using \\?\ syntax) makes them hard to operate with from the shell, Windows Explorer or other tools. Disallow these.
f7fcb18f	2014-11-23T14:12:54	Plug leaks Valgrind is now clean except for libssl and libgcrypt.
2d24816b	2014-11-06T18:49:37	checkout_index: Remove stage 0 when checking out conflicts
9f664347	2014-11-06T14:40:21	checkout_index: remove conflicts when checking out new files
8d3b2ee3	2014-10-11T20:56:50	Introduce failing test for conflict filtering in index
0625638f	2014-10-10T17:40:53	Merge pull request #2499 from csware/hard-reset-checkout-callbacks Allow to propagate checkout callbacks to git HARD reset
14556cbf	2014-09-17T17:13:25	Merge pull request #2567 from cirosantilli/factor-41 Factor 40 and 41 constants from source.
c5cf8cad	2014-09-17T15:19:08	Replace void casts with GIT_UNUSED.
3b2cb2c9	2014-09-16T11:49:25	Factor 40 and 41 constants from source.
b8add6c4	2014-08-03T15:44:13	Allow to propagate checkout callbacks to git HARD reset Signed-off-by: Sven Strickroth <email@cs-ware.de>
c1bf2942	2014-07-02T15:29:25	Merge pull request #2455 from ethomson/equal_oid Introduce `cl_assert_equal_oid`
0cee70eb	2014-07-01T14:09:01	Introduce cl_assert_equal_oid
f4046267	2014-06-26T09:16:12	checkout::conflict tests: only test owner mode The checkout::conflict type conflict tests were failing because they were overly assertive about the resultant mode, testing group & other bits, which failed miserably for people who had a umask less restrictive than 022. Only test the resultant owner bits.
d412165f	2014-06-18T16:54:32	Update text=auto / core.autocrlf=false behavior Git for Windows 1.9.4 changed the behavior when the text=auto attribute is specified and core.autocrlf=false. Previous observed behavior would not filter files when going into the working directory, the new behavior does filter. Update our behavior to match.
5a76ad35	2014-06-19T11:45:46	crlf: pass-through mixed EOL buffers from LF->CRLF When checking out files, we're performing conversion into the user's native line endings, but we only want to do it for files which have consistent line endings. Refuse to perform the conversion for mixed-EOL files. The CRLF->LF filter is left as-is, as that conversion is considered to be normalization by git and should force a conversion of the line endings.
6affd71f	2014-01-03T17:38:34	git_checkout_opts -> git_checkout_options
f77127da	2014-02-09T12:37:16	Tests for core.autocrlf and .gitattributes
a2ce19ca	2014-02-05T13:35:26	Prevent user's merge.conflictstyle from breaking tests
586be3b8	2014-02-03T15:05:55	Add reflog parameters to git_reset
b31ebfbc	2014-01-27T14:12:29	Add reflog params to git_branch_create
94f263f5	2014-01-25T08:04:49	Add reflog params to set-head calls
9950bb4e	2014-01-24T20:23:17	diff: rename the file's 'oid' to 'id' In the same vein as the previous commits in this series.
d541170c	2014-01-24T11:36:41	index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.
e8b81c69	2014-01-22T13:24:32	Preserve tree filemode in index during checkout Don't try to determine whether the system supports file modes when putting the tree data in the index during checkout. The tree's mode is canonical and did not come from stat(2) in the first place.
0b28217b	2014-01-15T12:51:31	refs: remove the _with_log differentiation Any well-behaved program should write a descriptive message to the reflog whenever it updates a reference. Let's make this more prominent by removing the version without the reflog parameters.
bf4a577c	2013-12-13T10:10:32	Overwrite ignored directories on checkout
81a2012d	2013-12-12T11:30:50	Overwrite ignored files on checkout
8046b26c	2013-12-10T16:16:36	Try a test that won't assert on Linux
cbd04896	2013-12-10T14:38:35	Fix checkout notify callback docs and tests The checkout notify callback behavior on non-zero return values was not being tested. This adds tests, fixes a bug with positive values, and clarifies the documentation to make it clear that the checkout can be canceled via this mechanism.
17820381	2013-11-14T14:05:52	Rename tests-clar to tests

326c9fc2

2015-12-01T20:41:23

checkout test: Apply umask to file-mode test as well Fix the file-mode test to expect system umask being applied to the created file as well (it is currently applied to the directory only). This fixes the test on systems where umask != 022. Signed-off-by: Michał Górny <mgorny@gentoo.org>

87428c55

2015-11-20T20:48:51

Fix some warnings

de999f26

2015-11-13T15:36:45

checkout::crlf test: don't crash when no idx entry When there's no matching index entry (for whatever reason), don't try to dereference the null return value to get at the id. Otherwise when we break something in the index API, the checkout test crashes for confusing reasons and causes us to step through it in a debugger thinking that we had broken much more than we actually did.

0226f7dd

2015-08-29T13:59:20

diff/index: respect USE_NSEC for racily clean file detection

ac2fba0e

2015-09-16T15:07:27

git_futils_mkdir_*: make a relative-to-base mkdir Untangle git_futils_mkdir from git_futils_mkdir_ext - the latter assumes that we own everything beneath the base, as if it were being called with a base of the repository or working directory, and is tailored towards checkout and ensuring that there is no bogosity beneath the base that must be cleaned up. This is (at best) slow and (at worst) unsafe in the larger context of a filesystem where we do not own things and cannot do things like unlink symlinks that are in our way.

eea7c850

2015-09-16T05:44:27

checkout: overwrite files with differing modes When a file exists on disk and we're checking out a file that differs in executableness, remove the old file. This allows us to recreate the new file with p_open, which will take the new mode into account and handle setting the umask properly. Remove any notion of chmod'ing existing files, since it is now handled by the aforementioned removal and was incorrect, as it did not take umask into account.

6fe32284

2015-09-16T10:17:54

checkout::tree tests: don't use hardcoded mode

b4d183a7

2015-09-16T04:12:47

checkout::tree tests: don't use static buffer

33cad995

2015-06-01T14:31:49

Check that checkout preserves filemode in working directory.

6124d983

2015-06-01T11:16:36

Check that an executable in index is not an executable after checkout.

504b0697

2015-06-30T14:25:00

checkout test: mark unused vars

64c415c2

2015-06-29T22:12:20

checkout test: check getcwd return value

afd8a94e

2015-06-26T18:49:39

checkout: plug a few leaks

1e46d545

2015-06-09T03:50:00

crlf tests: ensure that Unix obeys autocrlf=true All platforms do terrible, horrible, no good, very bad translation when core.autocrlf=true. It's not just Windows!

3d92b9ab

2015-06-08T09:08:01

crlf tests: use known-good data produced by git Given a variety of combinations of core.autocrlf settings and attributes settings, test that we check out data into the working directory the same as a known-good test resource created by git.git.

bd5e59ee

2015-06-08T09:04:39

crlf: include utf8 resources in master branch Include the UTF8 and UTF8 BOM tests in the master crlf test branch for completeness.

863dd89a

2015-06-18T12:45:40

tests: tick over five seconds instead of one When ticking over one second, it can happen that the actual time ticks over the same second between the time that we undermine our own race protections and the time in which we perform the index update. Such timing would make the time in the entries match the index' timestamp and we have not gained anything. Ticking over five seconds makes it so that if real-time rolls over that second, our index is still ahead. This is still suboptimal as we're dealing with timing, but five seconds should be long enough for any reasonable test runner to finish the tests.

85a5e8eb

2015-06-17T09:00:23

Fixed Xcode 6.1 build warnings

121c3171

2015-06-16T15:18:04

Introduce p_utimes and p_futimes Provide functionality to set the time on a filesystem entry, using utimes or futimes on POSIX type systems or SetFileTime on Win32.

e44abe16

2015-06-16T08:51:45

tests: tick the index when we count OID calculations These tests want to test that we don't recalculate entries which match the index already. This is however something we force when truncating racily-clean entries. Tick the index forward as we know that we don't perform the modifications which the racily-clean code is trying to avoid.

c4e6ab5f

2015-06-15T14:32:08

crlf: tick the index forward to work around racy-git behaviour In order to avoid racy-git, we zero out the file size for entries with the same timestamp as the index (or during the initial checkout). This is the case in a couple of crlf tests, as the code is fast enough to do everything in the same second. As we know that we do not perform the modification just after writing out the index, which is what this is designed to work around, tick the mtime of the index file such that it doesn't agree with the files anymore, and we do not zero out these entries.

26d5c0b8

2015-06-12T09:28:47

Fix leaks in tests/checkout/icase

885b94aa

2015-05-28T15:26:13

Rename GIT_EMERGECONFLICT to GIT_ECONFLICT We do not error on "merge conflicts"; on the contrary, merge conflicts are a normal part of merging. We only error on "checkout conflicts", where a change exists in the index or the working directory that would otherwise be overwritten by performing the checkout. This *may* happen during merge (after the production of the new index that we're going to checkout) but it could happen during any checkout.

2f1080ea

2015-05-19T11:17:07

conflict tests: use GIT_IDXENTRY_STAGE_SET

1ecbcd8e

2015-05-26T19:16:27

Fix ident replacement to match Git behavior Git inserts a space after the SHA1 (as of 2.1.4 at least), so do the same.

8f0104ec

2015-04-21T22:10:36

Remove the callbacks struct from the remote Having the setting be different from calling its actions was not a great idea and made for the sake of the wrong convenience. Instead of that, accept either fetch options, push options or the callbacks when dealing with the remote. The fetch options are currently only the callbacks, but more options will be moved from setters and getters on the remote to the options. This does mean passing the same struct along the different functions but the typical use-case will only call git_remote_fetch() or git_remote_push() and so won't notice much difference.

cd79d99a

2015-04-23T15:58:53

checkout test: better case-insensitive test on Mac On Mac OS, `realpath` is deficient in determining the actual filename on-disk as it will simply provide the string you gave it if that file exists, instead of returning the filename as it exists. Instead we must read the directory entries for the parent directory to get the canonical filename.

64842d87

2015-04-23T09:21:33

checkout test: only run icase on icase platform

05f69012

2015-03-31T16:28:13

checkout: remove blocking dir when FORCEd

3520c970

2015-03-27T15:39:28

Revert "Always checkout with case sensitive iterator" This reverts commit 40d791545abfb3cb71553a27dc64129e1a9bec28.

6dfd8506

2015-04-01T15:23:37

checkout test: ensure we write to casechanged dir Ensure that on a case insensitive filesystem that we can checkout into some folder 'FOLDER' that exists on disk, even if the target of the checkout is a different case (eg 'folder').

431f9807

2015-03-27T15:33:44

checkout test: ignore unstaged case-changing renames On Windows, you might sloppily rewrite a file (or have a sloppy text editor that does it for you) and accidentally change its case. (eg, "README" -> "readme"). Git ignores this accidental case changing rename during checkout and will happily write the new content to the file despite the name change. We should, too.

27fa7477

2015-04-23T10:54:08

Merge pull request #3032 from jfultz/index-file-modes Fix git_checkout_tree() to do index filemodes correctly on Windows.

63af449e

2015-04-10T11:33:14

Merge pull request #3030 from linquize/symlink_supported If work_dir is not specified, use repo_dir to test if symlink is supported

67db2bde

2015-03-10T12:02:45

Fix git_checkout_tree() to do index filemodes correctly on Windows. git_checkout_tree() has some fallback behaviors for file systems which don't have full support of filemodes. Generally works fine, but if a given file had a change of type from a 0644 to 0755 (i.e., you add executable permissions), the fallback behavior incorrectly triggers when writing hte updated index. This would cause a git_checkout_tree() command, even with the GIT_CHECKOUT_FORCE option set, to leave a dirty index on Windows. Also added checks to an existing test to catch this case.

7c2a2172

2015-04-04T00:29:01

Test: Create repo in while current dir is readonly and checkout symlink

7c2b9e06

2015-03-22T19:06:53

Illustrate bad checkout on Windows

118e6fdc

2015-03-16T23:08:16

Lower case the include directive of windows header Since the Linux platform has a case sensitive file system, the header name should be lower case for cross compiling purposes. (On Linux, the mingw header is called ```windows.h```).

76f03418

2015-03-03T17:04:38

Remove swp files

4e498646

2015-01-15T16:50:31

repository: remove log message override for switching the active branch We want to use the "checkout: moving from ..." message in order to let git know when a change of branch has happened. Make the convenience functions for this goal write this message.

6bfb990d

2015-01-07T14:47:02

branch: don't accept a reflog message override This namespace is about behaving like git's branch command, so let's do exactly that instead of taking a reflog message. This override is still available via the reference namespace.

23a17803

2015-01-07T14:16:50

reset: remove reflog message override This function is meant to simulate what git does in the reset command, so we should include the reflog message in that.

659cf202

2015-01-07T12:23:05

Remove the signature from ref-modifying functions The signature for the reflog is not something which changes dynamically. Almost all uses will be NULL, since we want for the repository's default identity to be used, making it noise. In order to allow for changing the identity, we instead provide git_repository_set_ident() and git_repository_ident() which allow a user to override the choice of signature.

496b76d4

2015-02-27T11:02:37

checkout tests: just use SAFE where appropriate

96b82b11

2015-02-14T11:44:05

checkout: remove `GIT_CHECKOUT_SAFE_CREATE` as a strategy

e6da3e44

2015-02-14T10:33:06

checkout: upgrade to `SAFE_CREATE` when no index file When the repository does not contain an index, emulate git's behavior and upgrade to `SAFE_CREATE`. This allows us to check out repositories created with `git clone --no-checkout`.

8639ea5f

2015-01-17T22:47:03

checkout: introduce GIT_CHECKOUT_DONT_WRITE_INDEX

d24a5312

2015-02-12T02:34:58

Merge pull request #2866 from ethomson/checkout_perf2 Checkout performance

fa89ff20

2015-02-03T05:35:24

remove some unused warnings

07c989e9

2015-02-03T20:01:24

win32: further cleanups for 8.3 disabling

5f28ec84

2015-02-03T12:16:11

win32: cleanup 8.3 disabled tests

2fbce0bf

2015-02-02T22:18:38

checkout test: ensure .gitattributes lifecycle The .gitattributes cache should not reload .gitattributes in the middle of checking out, only between checkout operations. Otherwise, we'll spend all our time stat'ing and read'ing the gitattributes.

9dcc4a36

2015-01-28T23:04:50

Fix test failures when 8.3 is disabled

e0902fbc

2015-01-15T17:17:01

checkout tests: cleanup realpath impl on Win32

53eb139d

2015-01-14T20:16:01

checkout tests: emulate p_realpath poorly on Win32

e74340b0

2015-01-14T18:47:00

checkout: remove files before writing new ones On case insensitive filesystems, we may have files in the working directory that case fold to a name we want to write. Remove those files (by default) so that we will not end up with a filename that has the unexpected case.

232bc895

2015-01-14T13:15:34

checkout tests: nasty symlinks Symbolic links that abuse case insensitivity to write into .git.

1d50b364

2015-01-12T16:16:27

checkout: introduce git_checkout_perfdata Checkout can now provide performance data about the number of (some) syscalls performed using an optional callback.

b4c6a9da

2014-10-26T05:45:23

Add files and tests with many UTF-8 chars and few UTF-8 chars

c4a2fd5c

2015-01-04T17:39:43

Plug a couple of leaks

40d79154

2014-05-09T19:32:52

Always checkout with case sensitive iterator On a case-insensitive filesystem, we need to deal with case-changing renames (eg, foo -> FOO) by removing the old and adding the new, exactly as if we were on a case-sensitive filesystem. Update the `checkout::tree::can_cancel_checkout_from_notify` test, now that notifications are always sent case sensitively.

61ee5b0e

2014-05-08T17:35:03

Introduce test for checkout case-changing rename

ec74b40c

2014-12-16T18:53:55

Introduce core.protectHFS and core.protectNTFS Validate HFS ignored char ".git" paths when `core.protectHFS` is specified. Validate NTFS invalid ".git" paths when `core.protectNTFS` is specified.

11d67b75

2014-12-10T19:12:16

checkout: disallow bad paths on HFS HFS filesystems ignore some characters like U+200C. When these characters are included in a path, they will be ignored for the purposes of comparison with other paths. Thus, if you have a ".git" folder, a folder of ".git<U+200C>" will also match. Protect our ".git" folder by ensuring that ".git<U+200C>" and friends do not match it.

a64119e3

2014-11-25T18:13:00

checkout: disallow bad paths on win32 Disallow: 1. paths with trailing dot 2. paths with trailing space 3. paths with trailing colon 4. paths that are 8.3 short names of .git folders ("GIT~1") 5. paths that are reserved path names (COM1, LPT1, etc). 6. paths with reserved DOS characters (colons, asterisks, etc) These paths would (without \\?\ syntax) be elided to other paths - for example, ".git." would be written as ".git". As a result, writing these paths literally (using \\?\ syntax) makes them hard to operate with from the shell, Windows Explorer or other tools. Disallow these.

f7fcb18f

2014-11-23T14:12:54

Plug leaks Valgrind is now clean except for libssl and libgcrypt.

2d24816b

2014-11-06T18:49:37

checkout_index: Remove stage 0 when checking out conflicts

9f664347

2014-11-06T14:40:21

checkout_index: remove conflicts when checking out new files

8d3b2ee3

2014-10-11T20:56:50

Introduce failing test for conflict filtering in index

0625638f

2014-10-10T17:40:53

Merge pull request #2499 from csware/hard-reset-checkout-callbacks Allow to propagate checkout callbacks to git HARD reset

14556cbf

2014-09-17T17:13:25

Merge pull request #2567 from cirosantilli/factor-41 Factor 40 and 41 constants from source.

c5cf8cad

2014-09-17T15:19:08

Replace void casts with GIT_UNUSED.

3b2cb2c9

2014-09-16T11:49:25

Factor 40 and 41 constants from source.

b8add6c4

2014-08-03T15:44:13

Allow to propagate checkout callbacks to git HARD reset Signed-off-by: Sven Strickroth <email@cs-ware.de>

c1bf2942

2014-07-02T15:29:25

Merge pull request #2455 from ethomson/equal_oid Introduce `cl_assert_equal_oid`

0cee70eb

2014-07-01T14:09:01

Introduce cl_assert_equal_oid

f4046267

2014-06-26T09:16:12

checkout::conflict tests: only test owner mode The checkout::conflict type conflict tests were failing because they were overly assertive about the resultant mode, testing group & other bits, which failed miserably for people who had a umask less restrictive than 022. Only test the resultant owner bits.

d412165f

2014-06-18T16:54:32

Update text=auto / core.autocrlf=false behavior Git for Windows 1.9.4 changed the behavior when the text=auto attribute is specified and core.autocrlf=false. Previous observed behavior would *not* filter files when going into the working directory, the new behavior *does* filter. Update our behavior to match.

5a76ad35

2014-06-19T11:45:46

crlf: pass-through mixed EOL buffers from LF->CRLF When checking out files, we're performing conversion into the user's native line endings, but we only want to do it for files which have consistent line endings. Refuse to perform the conversion for mixed-EOL files. The CRLF->LF filter is left as-is, as that conversion is considered to be normalization by git and should force a conversion of the line endings.

6affd71f

2014-01-03T17:38:34

git_checkout_opts -> git_checkout_options

f77127da

2014-02-09T12:37:16

Tests for core.autocrlf and .gitattributes

a2ce19ca

2014-02-05T13:35:26

Prevent user's merge.conflictstyle from breaking tests

586be3b8

2014-02-03T15:05:55

Add reflog parameters to git_reset

b31ebfbc

2014-01-27T14:12:29

Add reflog params to git_branch_create

94f263f5

2014-01-25T08:04:49

Add reflog params to set-head calls

9950bb4e

2014-01-24T20:23:17

diff: rename the file's 'oid' to 'id' In the same vein as the previous commits in this series.

d541170c

2014-01-24T11:36:41

index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.

e8b81c69

2014-01-22T13:24:32

Preserve tree filemode in index during checkout Don't try to determine whether the system supports file modes when putting the tree data in the index during checkout. The tree's mode is canonical and did not come from stat(2) in the first place.

0b28217b

2014-01-15T12:51:31

refs: remove the _with_log differentiation Any well-behaved program should write a descriptive message to the reflog whenever it updates a reference. Let's make this more prominent by removing the version without the reflog parameters.

bf4a577c

2013-12-13T10:10:32

Overwrite ignored directories on checkout

81a2012d

2013-12-12T11:30:50

Overwrite ignored files on checkout

8046b26c

2013-12-10T16:16:36

Try a test that won't assert on Linux

cbd04896

2013-12-10T14:38:35

Fix checkout notify callback docs and tests The checkout notify callback behavior on non-zero return values was not being tested. This adds tests, fixes a bug with positive values, and clarifies the documentation to make it clear that the checkout can be canceled via this mechanism.

17820381

2013-11-14T14:05:52

Rename tests-clar to tests

thodg/libgit2/tests/checkout

tests/checkout

Log