kmx git

Commit	Date	Message
5dca2010	2012-08-03T17:08:01	Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.
2a99df69	2012-05-24T17:14:56	Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.
255c38c5	2012-05-10T11:50:29	global: Fix unit tests after reordering
f917481e	2012-05-03T16:37:25	Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.
4e7a3c76	2012-05-01T00:33:25	attr: add test coverage related to crlf normalization while staging
d58336dd	2012-04-26T10:51:45	Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.
19fa2bc1	2012-04-17T15:12:50	Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.
1a6e8f8a	2012-04-13T10:42:00	Update clar and remove old helpers This updates to the latest clar which includes the helpers `cl_assert_equal_s` and `cl_assert_equal_i`. Convert the code over to use those and remove the old libgit2-only helpers.
14a513e0	2012-04-13T15:00:29	Add support for pathspec to diff and status This adds preliminary support for pathspecs to diff and status. The implementation is not very optimized (it still looks at every single file and evaluated the the pathspec match against them), but it works.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
e1de726c	2012-03-12T22:55:40	Migrate ODB files to new error handling This migrates odb.c, odb_loose.c, odb_pack.c and pack.c to the new style of error handling. Also got the unix and win32 versions of map.c. There are some minor changes to other files but no others were completely converted. This also contains an update to filebuf so that a zeroed out filebuf will not think that the fd (== 0) is actually open (and inadvertently call close() on fd 0 if cleaned up). Lastly, this was built and tested on win32 and contains a bunch of fixes for the win32 build which was pretty broken.
7bed25a2	2012-03-09T11:10:22	Fix the build on Windows
529df4df	2012-03-02T15:57:06	Fixes for merge of filters branch
854eccbb	2012-02-29T12:04:59	Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing count++ but meant to do (count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.
7e3fc623	2012-01-23T10:54:49	Add test for possible attr bug This is a test that should replicate an issue that Peff is setting with git attributes. But the test doesn't fail.
d377fe80	2012-03-02T22:12:46	attr: Add missing header to test suite
c63793ee	2012-03-02T03:51:45	attr: Change the attribute check macros The point of having `GIT_ATTR_TRUE` and `GIT_ATTR_FALSE` macros is to be able to change the way that true and false values are stored inside of the returned gitattributes value pointer. However, if these macros are implemented as a simple rename for the `git_attr__true` pointer, they will always be used with the `==` operator, and hence we cannot really change the implementation to any other way that doesn't imply using special pointer values and comparing them! We need to do the same thing that core Git does, which is using a function macro. With `GIT_ATTR_TRUE(attr)`, we can change internally the way that these values are stored to anything we want. This commit does that, and rewrites a large chunk of the attributes test suite to remove duplicated code for expected attributes, and to properly test the function macro behavior instead of comparing pointers.
e8c96ed2	2012-02-01T12:30:35	Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.
adc9bdb3	2012-01-31T13:59:32	Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.
3fd1520c	2012-01-24T20:35:15	Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

5dca2010

2012-08-03T17:08:01

Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.

2a99df69

2012-05-24T17:14:56

Fix bugs for status with spaces and reloaded attrs This fixes two bugs: * Issue #728 where git_status_file was not working for files that contain spaces. This was caused by reusing the "fnmatch" parsing code from ignore and attribute files to interpret the "pathspec" that constrained the files to apply the status to. In that code, unescaped whitespace was considered terminal to the pattern, so a file with internal whitespace was excluded from the matched files. The fix was to add a mode to that code that allows spaces and tabs inside patterns. This mode only comes into play when parsing in-memory strings. * The other issue was undetected, but it was in the recently added code to reload gitattributes / gitignores when they were changed on disk. That code was not clearing out the old values from the cached file content before reparsing which meant that newly added patterns would be read in, but deleted patterns would not be removed. The fix was to clear the vector of patterns in a cached file before reparsing the file.

255c38c5

2012-05-10T11:50:29

global: Fix unit tests after reordering

f917481e

2012-05-03T16:37:25

Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.

4e7a3c76

2012-05-01T00:33:25

attr: add test coverage related to crlf normalization while staging

d58336dd

2012-04-26T10:51:45

Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.

19fa2bc1

2012-04-17T15:12:50

Convert attrs and diffs to use string pools This converts the git attr related code (including ignores) and the git diff related code (and implicitly the status code) to use `git_pools` for storing strings. This reduces the number of small blocks allocated dramatically.

1a6e8f8a

2012-04-13T10:42:00

Update clar and remove old helpers This updates to the latest clar which includes the helpers `cl_assert_equal_s` and `cl_assert_equal_i`. Convert the code over to use those and remove the old libgit2-only helpers.

14a513e0

2012-04-13T15:00:29

Add support for pathspec to diff and status This adds preliminary support for pathspecs to diff and status. The implementation is not very optimized (it still looks at every single file and evaluated the the pathspec match against them), but it works.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

e1de726c

2012-03-12T22:55:40

Migrate ODB files to new error handling This migrates odb.c, odb_loose.c, odb_pack.c and pack.c to the new style of error handling. Also got the unix and win32 versions of map.c. There are some minor changes to other files but no others were completely converted. This also contains an update to filebuf so that a zeroed out filebuf will not think that the fd (== 0) is actually open (and inadvertently call close() on fd 0 if cleaned up). Lastly, this was built and tested on win32 and contains a bunch of fixes for the win32 build which was pretty broken.

7bed25a2

2012-03-09T11:10:22

Fix the build on Windows

529df4df

2012-03-02T15:57:06

Fixes for merge of filters branch

854eccbb

2012-02-29T12:04:59

Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing *count++ but meant to do (*count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.

7e3fc623

2012-01-23T10:54:49

Add test for possible attr bug This is a test that should replicate an issue that Peff is setting with git attributes. But the test doesn't fail.

d377fe80

2012-03-02T22:12:46

attr: Add missing header to test suite

c63793ee

2012-03-02T03:51:45

attr: Change the attribute check macros The point of having `GIT_ATTR_TRUE` and `GIT_ATTR_FALSE` macros is to be able to change the way that true and false values are stored inside of the returned gitattributes value pointer. However, if these macros are implemented as a simple rename for the `git_attr__true` pointer, they will always be used with the `==` operator, and hence we cannot really change the implementation to any other way that doesn't imply using special pointer values and comparing them! We need to do the same thing that core Git does, which is using a function macro. With `GIT_ATTR_TRUE(attr)`, we can change internally the way that these values are stored to anything we want. This commit does that, and rewrites a large chunk of the attributes test suite to remove duplicated code for expected attributes, and to properly test the function macro behavior instead of comparing pointers.

e8c96ed2

2012-02-01T12:30:35

Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.

adc9bdb3

2012-01-31T13:59:32

Fix attr path is_dir check When building an attr path object, the code that checks if the file is a directory was evaluating the file as a relative path to the current working directory, instead of using the repo root. This lead to inconsistent behavior.

3fd1520c

2012-01-24T20:35:15

Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

thodg/libgit2/tests-clar/attr

tests-clar/attr

Log