|
9f779aac
|
2015-01-29T14:40:55
|
|
attrcache: don't re-read attrs during checkout
During checkout, assume that the .gitattributes files aren't
modified during the checkout. Instead, create an "attribute session"
during checkout. Assume that attribute data read in the same
checkout "session" hasn't been modified since the checkout started.
(But allow subsequent checkouts to invalidate the cache.)
Further, cache nonexistent git_attr_file data even when .gitattributes
files are not found to prevent re-scanning for nonexistent files.
|
|
6069042f
|
2014-11-05T16:51:39
|
|
ignore: don't leak rules into higher directories
A rule "src" in src/.gitignore must only match subdirectories of
src/. The current code does not include this context in the match rule
and would thus consider this rule to match the top-level src/ directory
instead of the intended src/src/.
Keep track fo the context in which the rule was defined so we can
perform a prefix match.
|
|
f554611a
|
2014-05-06T12:41:26
|
|
Improve checks for ignore containment
The diff code was using an "ignored_prefix" directory to track if
a parent directory was ignored that contained untracked files
alongside tracked files. Unfortunately, when negative ignore rules
were used for directories inside ignored parents, the wrong rules
were applied to untracked files inside the negatively ignored
child directories.
This commit moves the logic for ignore containment into the workdir
iterator (which is a better place for it), so the ignored-ness of
a directory is contained in the frame stack during traversal. This
allows a child directory to override with a negative ignore and yet
still restore the ignored state of the parent when we traverse out
of the child.
Along with this, there are some problems with "directory only"
ignore rules on container directories. Given "a/*" and "!a/b/c/"
(where the second rule is a directory rule but the first rule is
just a generic prefix rule), then the directory only constraint
was having "a/b/c/d/file" match the first rule and not the second.
This was fixed by having ignore directory-only rules test a rule
against the prefix of a file with LEADINGDIR enabled.
Lastly, spot checks for ignores using `git_ignore_path_is_ignored`
were tested from the top directory down to the bottom to deal with
the containment problem, but this is wrong. We have to test bottom
to top so that negative subdirectory rules will be checked before
parent ignore rules.
This does change the behavior of some existing tests, but it seems
only to bring us more in line with core Git, so I think those
changes are acceptable.
|
|
ac16bd0a
|
2014-04-18T15:45:59
|
|
Minor fixes
Only apply LEADING_DIR pattern munging to patterns in ignore and
attribute files, not to pathspecs used to select files to operate
on. Also, allow internal macro definitions to be evaluated before
loading all external ones (important so that external ones can
make use of internal `binary` definition).
|
|
916fcbd6
|
2014-04-18T14:42:40
|
|
Fix ignore difference from git with trailing /*
Ignore patterns that ended with a trailing '/*' were still needing
to match against another actual '/' character in the full path.
This is not the same behavior as core Git.
Instead, we strip a trailing '/*' off of any patterns that were
matching and just take it to imply the FNM_LEADING_DIR behavior.
|
|
823c0e9c
|
2014-04-17T11:53:13
|
|
Fix broken logic for attr cache invalidation
The checks to see if files were out of date in the attibute cache
was wrong because the cache-breaker data wasn't getting stored
correctly. Additionally, when the cache-breaker triggered, the
old file data was being leaked.
|
|
e6e8530a
|
2014-04-14T12:31:17
|
|
Lock attribute file while reparsing data
I don't love this approach, but achieving thread-safety for
attribute and ignore data while reloading files would require a
larger rewrite in order to avoid this. If an attribute or ignore
file is out of date, this holds a lock on the file while we are
reloading the data so that another thread won't try to reload the
data at the same time.
|
|
7d490872
|
2014-04-10T22:31:01
|
|
Attribute file cache refactor
This is a big refactoring of the attribute file cache to be a bit
simpler which in turn makes it easier to enforce a lock around any
updates to the cache so that it can be used in a threaded env.
Tons of changes to the attributes and ignores code.
|
|
40ed4990
|
2014-02-11T14:45:37
|
|
Add diff threading tests and attr file cache locks
This adds a basic test of doing simultaneous diffs on multiple
threads and adds basic locking for the attr file cache because
that was the immediate problem that arose from these tests.
|
|
4ba64794
|
2013-08-09T10:52:35
|
|
Revert PR #1462 and provide alternative fix
This rolls back the changes to fnmatch parsing from commit
2e40a60e847d6c128af23e24ea7a8efebd2427da except for the tests
that were added. Instead this adds couple of new flags that can
be passed in when attempting to parse an fnmatch pattern. Also,
this changes the pathspec match logic to special case matching a
filename with a '!' prefix against a negative pattern.
This fixes the build.
|
|
33d532dc
|
2013-08-09T09:32:06
|
|
Merge pull request #1462 from yorah/fix/libgit2sharp-issue-379
status: fix handling of filenames with special prefixes
|
|
0cb16fe9
|
2013-05-15T20:26:55
|
|
Unify whitespaces to tabs
|
|
2e40a60e
|
2013-04-11T17:29:05
|
|
status: fix handling of filenames with special prefixes
Fix libgit2/libgit2sharp#379
|
|
0d32f39e
|
2013-03-04T11:31:50
|
|
Notify '*' pathspec correctly when diffing
I also moved all tests related to notifying in their own file.
|
|
5540d947
|
2013-03-15T16:39:00
|
|
Implement global/system file search paths
The goal of this work is to expose the search logic for "global",
"system", and "xdg" files through the git_libgit2_opts() interface.
Behind the scenes, I changed the logic for finding files to have a
notion of a git_strarray that represents a search path and to store
a separate search path for each of the three tiers of config file.
For each tier, I implemented a function to initialize it to default
values (generally based on environment variables), and then general
interfaces to get it, set it, reset it, and prepend new directories
to it.
Next, I exposed these interfaces through the git_libgit2_opts
interface, reusing the GIT_CONFIG_LEVEL_SYSTEM, etc., constants
for the user to control which search path they were modifying.
There are alternative designs for the opts interface / argument
ordering, so I'm putting this phase out for discussion.
Additionally, I ended up doing a little bit of clean up regarding
attr.h and attr_file.h, adding a new attrcache.h so the other two
files wouldn't have to be included in so many places.
|
|
359fc2d2
|
2013-01-08T17:07:25
|
|
update copyrights
|
|
55cbd05b
|
2012-11-08T16:56:34
|
|
Some diff refactorings to help code reuse
There are some diff functions that are useful in a rewritten
checkout and this lays some groundwork for that. This contains
three main things:
1. Share the function diff uses to calculate the OID for a file
in the working directory (now named `git_diff__oid_for_file`
2. Add a `git_diff__paired_foreach` function to iterator over
two diff lists concurrently. Convert status to use it.
3. Move all the string/prefix/index entry comparisons into
function pointers inside the `git_diff_list` object so they
can be switched between case sensitive and insensitive
versions. This makes them easier to reuse in various
functions without replicating logic. As part of this, move
a couple of index functions out of diff.c and into index.c.
|
|
c1f61af6
|
2012-10-31T20:52:01
|
|
I LIKE THESE NAMES
|
|
c8b511f3
|
2012-10-31T11:26:12
|
|
Better naming for file timestamp/size checker
|
|
744cc03e
|
2012-10-30T12:10:36
|
|
Add git_config_refresh() API to reload config
This adds a new API that allows users to reload the config if the
file has changed on disk. A new config callback function to
refresh the config was added.
The modified time and file size are used to test if the file needs
to be reloaded (and are now stored in the disk backend object).
In writing tests, just using mtime was a problem / race, so I
wanted to check file size as well. To support that, I extended
`git_futils_readbuffer_updated` to optionally check file size in
addition to mtime, and I added a new function `git_filebuf_stats`
to fetch the mtime and size for an open filebuf (so that the
config could be easily refreshed after a write).
Lastly, I moved some similar file checking code for attributes
into filebuf. It is still only being used for attrs, but it
seems potentially reusable, so I thought I'd move it over.
|
|
52032ae5
|
2012-10-15T12:48:43
|
|
Fix single-file ignore checks
To answer if a single given file should be ignored, the path to
that file has to be processed progressively checking that there
are no intermediate ignored directories in getting to the file
in question. This enables that, fixing the broken old behavior,
and adds tests to exercise various ignore situations.
|
|
ec40b7f9
|
2012-09-17T15:42:41
|
|
Support for core.ignorecase
|
|
0c9eacf3
|
2012-08-02T01:15:24
|
|
attr: Do not export variables externally
Fixes #824
Exporting variables in a dynamic library is a PITA. Let's keep
these values internally and wrap them through a helper method.
This doesn't break the external API. @arrbee, aren't you glad I turned
the `GIT_ATTR_` macros into function macros? :sparkles:
|
|
2a99df69
|
2012-05-24T17:14:56
|
|
Fix bugs for status with spaces and reloaded attrs
This fixes two bugs:
* Issue #728 where git_status_file was not working for files
that contain spaces. This was caused by reusing the "fnmatch"
parsing code from ignore and attribute files to interpret the
"pathspec" that constrained the files to apply the status to.
In that code, unescaped whitespace was considered terminal to
the pattern, so a file with internal whitespace was excluded
from the matched files. The fix was to add a mode to that code
that allows spaces and tabs inside patterns. This mode only
comes into play when parsing in-memory strings.
* The other issue was undetected, but it was in the recently
added code to reload gitattributes / gitignores when they were
changed on disk. That code was not clearing out the old values
from the cached file content before reparsing which meant that
newly added patterns would be read in, but deleted patterns
would not be removed. The fix was to clear the vector of
patterns in a cached file before reparsing the file.
|
|
dc13f1f7
|
2012-05-10T11:08:59
|
|
Add cache busting to attribute cache
This makes the git attributes and git ignores cache check
stat information before using the file contents from the
cache. For cached files from the index, it checks the SHA
of the file instead. This should reduce the need to ever
call `git_attr_cache_flush()` in most situations.
This commit also fixes the `git_status_should_ignore` API
to use the libgit2 standard parameter ordering.
|
|
f917481e
|
2012-05-03T16:37:25
|
|
Support reading attributes from index
Depending on the operation, we need to consider gitattributes
in both the work dir and the index. This adds a parameter to
all of the gitattributes related functions that allows user
control of attribute reading behavior (i.e. prefer workdir,
prefer index, only use index).
This fix also covers allowing us to check attributes (and
hence do diff and status) on bare repositories.
This was a somewhat larger change that I hoped because it had
to change the cache key used for gitattributes files.
|
|
d58336dd
|
2012-04-26T10:51:45
|
|
Fix leading slash behavior in attrs/ignores
We were not following the git behavior for leading slashes
in path names when matching git ignores and git attribute
file patterns. This should fix issue #638.
|
|
c2b67043
|
2012-04-25T15:20:28
|
|
Rename git_khash_str to git_strmap, etc.
This renamed `git_khash_str` to `git_strmap`, `git_hash_oid` to
`git_oidmap`, and deletes `git_hashtable` from the tree, plus
adds unit tests for `git_strmap`.
|
|
19fa2bc1
|
2012-04-17T15:12:50
|
|
Convert attrs and diffs to use string pools
This converts the git attr related code (including ignores) and
the git diff related code (and implicitly the status code) to use
`git_pools` for storing strings. This reduces the number of small
blocks allocated dramatically.
|
|
14a513e0
|
2012-04-13T15:00:29
|
|
Add support for pathspec to diff and status
This adds preliminary support for pathspecs to diff and status.
The implementation is not very optimized (it still looks at
every single file and evaluated the the pathspec match against
them), but it works.
|
|
95dfb031
|
2012-03-30T14:40:50
|
|
Improve config handling for diff,submodules,attrs
This adds support for a bunch of core.* settings that affect
diff and status, plus fixes up some incorrect implementations
of those settings from before. Also, this cleans up the
handling of config settings in the new submodules code and
in the old attrs/ignore code.
|
|
ab43ad2f
|
2012-03-14T11:07:14
|
|
Convert attr and other files to new errors
This continues to add other files to the new error handling
style. I think the only real concerns here are that there are
a couple of error return cases that I have converted to asserts,
but I think that it was the correct thing to do given the new
error style.
|
|
5e0de328
|
2012-02-13T17:10:24
|
|
Update Copyright header
Signed-off-by: schu <schu-github@schulog.org>
|
|
adc9bdb3
|
2012-01-31T13:59:32
|
|
Fix attr path is_dir check
When building an attr path object, the code that checks if the
file is a directory was evaluating the file as a relative path
to the current working directory, instead of using the repo root.
This lead to inconsistent behavior.
|
|
a51cd8e6
|
2012-01-16T16:58:27
|
|
Fix handling of relative paths for attrs
Per issue #533, the handling of relative paths in attribute
and ignore files was not right. Fixed this by pre-joining
the relative path of the attribute/ignore file onto the match
string when a full path match is required.
Unfortunately, fixing this required a bit more code than I
would have liked because I had to juggle things around so that
the fnmatch parser would have sufficient information to prepend
the relative path when it was needed.
|
|
cfbc880d
|
2012-01-16T15:16:44
|
|
Patch cleanup for merge
After reviewing the gitignore support with Vicent, we came up
with a list of minor cleanups to prepare for merge, including:
* checking git_repository_config error returns
* renaming git_ignore_is_ignored and moving to status.h
* fixing next_line skipping to include \r skips
* commenting on where ignores are and are not included
|
|
df743c7d
|
2012-01-09T15:37:19
|
|
Initial implementation of gitignore support
Adds support for .gitignore files to git_status_foreach() and
git_status_file(). This includes refactoring the gitattributes
code to share logic where possible. The GIT_STATUS_IGNORED flag
will now be passed in for files that are ignored (provided they
are not already in the index or the head of repo).
|
|
73b51450
|
2011-12-28T23:28:50
|
|
Add support for macros and cache flush API.
Add support for git attribute macro definitions. Also, add
support for cache flush API to clear the attribute file content
cache when needed.
Additionally, improved the handling of global and system files,
making common utility functions in fileops and converting config
and attr to both use the common functions.
Adds a bunch more tests and fixed some memory leaks. Note that
adding macros required me to use refcounted attribute assignment
definitions, which complicated, but probably improved memory usage.
|
|
ee1f0b1a
|
2011-12-16T10:56:43
|
|
Add APIs for git attributes
This adds APIs for querying git attributes. In addition to
the new API in include/git2/attr.h, most of the action is in
src/attr_file.[hc] which contains utilities for dealing with
a single attributes file, and src/attr.[hc] which contains
the implementation of the APIs that merge all applicable
attributes files.
|