|
32cc5edc
|
2017-07-07T17:10:57
|
|
tests: status: additional test for negative ignores with pattern
This test is by Carlos Martín Nieto.
|
|
c3b8e8b3
|
2017-05-14T10:28:05
|
|
Fix issue with directory glob ignore in subdirectories
|
|
c52480fd
|
2017-02-17T13:01:49
|
|
`cl_git_exec` -> `cl_git_expect`
|
|
|
a1dcc830
|
2017-02-17T12:13:35
|
|
tests: provide better pass/failure error messages
Provide more detailed messages when conditions pass or fail
unexpectedly. In particular, this provides the error messages when a
test fails with a different error code than was expected.
|
|
|
fcb2c1c8
|
2016-08-12T09:06:15
|
|
ignore: allow unignoring basenames in subdirectories
The .gitignore file allows for patterns which unignore previous
ignore patterns. When unignoring a previous pattern, there are
basically three cases how this is matched when no globbing is
used:
1. when a previous file has been ignored, it can be unignored by
using its exact name, e.g.
foo/bar
!foo/bar
2. when a file in a subdirectory has been ignored, it can be
unignored by using its basename, e.g.
foo/bar
!bar
3. when all files with a basename are ignored, a specific file
can be unignored again by specifying its path in a
subdirectory, e.g.
bar
!foo/bar
The first problem in libgit2 is that we did not correctly treat
the second case. While we verified that the negative pattern
matches the tail of the positive one, we did not verify if it
only matches the basename of the positive pattern. So e.g. we
would have also negated a pattern like
foo/fruz_bar
!bar
Furthermore, we did not check for the third case, where a
basename is being unignored in a certain subdirectory again.
Both issues are fixed with this commit.
|
|
ac2fba0e
|
2015-09-16T15:07:27
|
|
git_futils_mkdir_*: make a relative-to-base mkdir
Untangle git_futils_mkdir from git_futils_mkdir_ext - the latter
assumes that we own everything beneath the base, as if it were
being called with a base of the repository or working directory,
and is tailored towards checkout and ensuring that there is no
bogosity beneath the base that must be cleaned up.
This is (at best) slow and (at worst) unsafe in the larger context
of a filesystem where we do not own things and cannot do things like
unlink symlinks that are in our way.
|
|
657afd35
|
2015-09-13T06:18:49
|
|
ignore: add test and adjust style and comment for dir with wildmatch
The previous commit left the comment referencing the earlier state of
the code, change it to explain the current logic. While here, change the
logic to avoid repeating the copy of the base pattern.
|
|
|
2c57114f
|
2015-05-20T21:18:25
|
|
ignore: clear the error when matching a pattern negation
When we discover that we want to keep a negative rule, make sure to
clear the error variable, as it we otherwise return whatever was left by
the previous loop iteration.
|
|
|
4f358603
|
2015-03-24T16:33:50
|
|
ignore: fix negative ignores without wildcards.
|
|
|
e0a97416
|
2014-12-05T16:31:14
|
|
ignore: adjust test for negating inside a dir
Given
top
!top/foo
in an ignore file, we should not unignore top/foo. This is an
implementation detail of the git code leaking, but that's the behaviour
we should show.
A negation rule can only negate an exact rule it has seen before.
|
|
|
f7fcb18f
|
2014-11-23T14:12:54
|
|
Plug leaks
Valgrind is now clean except for libssl and libgcrypt.
|
|
|
0798b014
|
2014-10-04T11:48:50
|
|
ignore: add failing test for a file mentioning the parent
When we mention "src" in src/.gitignore, we wrongly consider src/ itself
to be ignored.
|
|
|
5c54e216
|
2014-11-05T16:07:07
|
|
ignore: consider files with a CR in their names
We currently consider CR to start the end of the line, but that means
that we miss cases with CR CR LF which can be used with git to match
files whose names have CR at the end of their names.
The fix from the patch comes from Russell's comment in the issue.
This fixes #2536.
|
|
bbe13802
|
2014-06-12T14:19:34
|
|
Demonstrate a trailing slash failure.
`git help ignore` has this to say about trailing slashes:
> If the pattern ends with a slash, it is removed for the purpose of
> the following description, but it would only find a match with a
> directory. In other words, foo/ will match a directory foo and
> paths underneath it, but will not match a regular file or a
> symbolic link foo (this is consistent with the way how pathspec
> works in general in Git).
Sure enough, having manually performed the same steps as this test,
`git status` tells us the following:
# On branch master
#
# Initial commit
#
# Changes to be committed:
# (use "git rm --cached <file>..." to unstage)
#
# new file: force.txt
#
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# ../.gitignore
# child1/
# child2/
i.e. neither child1 nor child2 is ignored.
|
|
|
aa5cdf63
|
2014-06-04T11:57:53
|
|
status: failing test with slash-star
When writing 'bin/*' in the rules, this means we ignore very file inside
bin/ individually, but do not ignore the directory itself. Thus the
status listing should list both files under bin/, one untracked and one
ignored.
|
|
f554611a
|
2014-05-06T12:41:26
|
|
Improve checks for ignore containment
The diff code was using an "ignored_prefix" directory to track if
a parent directory was ignored that contained untracked files
alongside tracked files. Unfortunately, when negative ignore rules
were used for directories inside ignored parents, the wrong rules
were applied to untracked files inside the negatively ignored
child directories.
This commit moves the logic for ignore containment into the workdir
iterator (which is a better place for it), so the ignored-ness of
a directory is contained in the frame stack during traversal. This
allows a child directory to override with a negative ignore and yet
still restore the ignored state of the parent when we traverse out
of the child.
Along with this, there are some problems with "directory only"
ignore rules on container directories. Given "a/*" and "!a/b/c/"
(where the second rule is a directory rule but the first rule is
just a generic prefix rule), then the directory only constraint
was having "a/b/c/d/file" match the first rule and not the second.
This was fixed by having ignore directory-only rules test a rule
against the prefix of a file with LEADINGDIR enabled.
Lastly, spot checks for ignores using `git_ignore_path_is_ignored`
were tested from the top directory down to the bottom to deal with
the containment problem, but this is wrong. We have to test bottom
to top so that negative subdirectory rules will be checked before
parent ignore rules.
This does change the behavior of some existing tests, but it seems
only to bring us more in line with core Git, so I think those
changes are acceptable.
|
|
|
0f603132
|
2014-05-01T14:47:33
|
|
Improve handling of fake home directory
There are a few tests that set up a fake home directory and a
fake GLOBAL search path so that we can test things in global
ignore or attribute or config files. This cleans up that code to
work more robustly even if there is a test failure. This also
fixes some valgrind warnings where scanning search paths for
separators could end up doing a little bit of sketchy data access
when coming to the end of search list.
|
|
|
916fcbd6
|
2014-04-18T14:42:40
|
|
Fix ignore difference from git with trailing /*
Ignore patterns that ended with a trailing '/*' were still needing
to match against another actual '/' character in the full path.
This is not the same behavior as core Git.
Instead, we strip a trailing '/*' off of any patterns that were
matching and just take it to imply the FNM_LEADING_DIR behavior.
|
|
|
50e46d60
|
2014-04-18T10:58:01
|
|
Cleanup tests with helper functions
|
|
|
6a0956e5
|
2014-04-18T10:32:35
|
|
Pop ignore only if whole relative path matches
When traversing the directory structure, the iterator pushes and
pops ignore files using a vector. Some directories don't have
ignore files, so it uses a path comparison to decide when it is
right to actually pop the last ignore file. This was only
comparing directory suffixes, though, so a subdirectory with the
same name as a parent could result in the parent's .gitignore
being popped off the list ignores too early. This changes the
logic to compare the entire relative path of the ignore file.
|
|
|
823c0e9c
|
2014-04-17T11:53:13
|
|
Fix broken logic for attr cache invalidation
The checks to see if files were out of date in the attibute cache
was wrong because the cache-breaker data wasn't getting stored
correctly. Additionally, when the cache-breaker triggered, the
old file data was being leaked.
|
|
|
a9528b8f
|
2014-04-14T15:59:48
|
|
Fix core.excludesfile named .gitignore
Ignore rules with slashes in them are matched using FNM_PATHNAME
and use the path to the .gitignore file from the root of the
repository along with the path fragment (including slashes) in
the ignore file itself. Unfortunately, the relative path to the
.gitignore file was being applied to the global core.excludesfile
if that was also named ".gitignore".
This fixes that with more precise matching and includes test for
ignore rules with leading slashes (which were the primary example
of this being broken in the real world).
This also backports an improvement to the file context logic from
the threadsafe-iterators branch where we don't rely on mutating
the key of the attribute file name to generate the context path.
|
|
|
8f7bc646
|
2014-04-10T16:33:39
|
|
Fix bug popping ignore files during wd iteration
There were a couple bugs in popping ignore files during iteration
that could result in incorrect decisions be made and thus ignore
files below the root either not being loaded correctly or not
being popped at the right time.
One bug was an off-by-one in comparing the path of the gitignore
file with the path being exited during iteration.
The second bug was not correctly truncating the path being tracked
during traversal if there were no ignores on the list (i.e. when
you have no .gitignore at the root, but do have some in contained
directories).
|
|
17820381
|
2013-11-14T14:05:52
|
|
Rename tests-clar to tests
|