|
a83fd510
|
2020-07-12T21:26:59
|
|
Merge pull request #5396 from lhchavez/mwindow-file-limit
mwindow: set limit on number of open files
|
|
92d42eb3
|
2020-07-12T09:53:10
|
|
Minor nits and style formatting
|
|
|
26b9e489
|
2020-07-12T17:04:29
|
|
Merge pull request #5570 from libgit2/pks/refdb-refactorings
refdb: a set of preliminary refactorings for the reftable backend
|
|
34987447
|
2020-06-30T10:13:26
|
|
refdb: avoid unlimited spinning in case of symref cycles
To determine whether another reflog entry needs to be written for HEAD
on a reference update, we need to see whether HEAD directly or
indirectly points to the reference we're updating. The resolve logic is
currently completely unbounded except an error occurs, which effectively
means that we'd be spinning forever in case we have a symref loop in the
repository refdb.
Let's fix the issue by using `git_refdb_resolve` instead, which is
always bounded.
|
|
|
b895547c
|
2020-06-30T09:35:21
|
|
refs: replace reimplementation of reference resolver
The refs code currently has a second implementation that resolves
references in order to find any final symbolic reference pointing to a
nonexistent target branch. As we've just extended `git_refdb_resolve` to
also return such references, let's use that one instead in order to
reduce code duplication.
|
|
|
cf7dd05b
|
2020-06-30T13:26:05
|
|
refdb: return resolved symbolic refs pointing to nonexistent refs
In some cases, resolving references requires us to also know about the
final symbolic reference that's pointing to a nonexistent branch, e.g.
in an empty repository where the main branch is yet unborn but HEAD
already points to it. Right now, the resolving logic is thus split up
into two, where one is the new refdb implementation and the second one
is an ad-hoc implementation inside "refs.c".
Let's extend `git_refdb_resolve` to also return such final dangling
references pointing to nonexistent branches so we can deduplicate the
resolving logic.
|
|
|
c54f40e4
|
2020-06-30T09:28:12
|
|
refs: move resolving of references into the refdb
Resolving of symbolic references is currently implemented inside the
"refs" layer. As a result, it's hard to call this function from
low-level parts that only have a refdb available, but no repository, as
the "refs" layer always operates on the repository-level. So let's move
the function into the generic "refdb" implementation to lift this
restriction.
|
|
|
1f39593b
|
2020-06-30T08:53:59
|
|
refdb: extract function to check whether to append HEAD to the reflog
The logic to determine whether a reflog entry should be for the HEAD
reference is non-trivial. Currently, the only user of this is the
filesystem-based refdb, but with the advent of the reftable refdb we're
going to add a second user that's interested in having the same
behaviour.
Let's pull out a new function that checks whether a given reference
should cause a entry to be written to the HEAD reflog as a preparatory
step.
|
|
|
e02478b1
|
2020-06-05T08:17:03
|
|
refdb: extract function to check whether a reflog should be written
The logic to determine whether a reflog should be written is
non-trivial. Currently, the only user of this is the filesystem-based
refdb, but with the advent of the reftable refdb we're going to add a
second user that's interested in having the same behaviour.
Let's pull out a new function that checks whether a given reference
should cause a reflog to be written as a preparatory step.
|
|
|
4218403e
|
2020-06-05T10:49:09
|
|
cmake: use target-specific compile definitions
We set up some compile definitions as part of our src/CMakeLists.txt.
While the definitions are global, we really only need them as part of
the git2internal target which compiles all the objects. Let's thus use
`target_compile_definitions` instead of `add_definitions`.
|
|
|
53911edd
|
2020-06-05T10:24:30
|
|
cmake: use git2internal target to populate sources
Modern CMake is usually target-driven in that a target is first defined
and then the likes of `target_sources`, `target_include_directories`
etc. are used to further populate the target. We still use old-style
CMake, where we first set up a set of variables and then populate the
target in a single call.
Let's migrate to modern CMake usage by starting to populate the sources
of our git2internal target piece-by-piece. While this is a small step,
it allows us to convert to target-based build instructions
piece-by-piece.
|
|
|
19eb1e4b
|
2020-06-05T10:07:33
|
|
cmake: specify project version
We currently do not set up a project version within CMake, meaning that
it can't be use by other projects including libgit2 as a sub-project and
also not by other tools like IDEs.
This commit changes this to always set up a project version, but instead
of extracting it from the "version.h" header we now set it up directly.
This is mostly to avoid mis-use of the previous `LIBGIT2_VERSION`
variables, as we should now always use the `libgit2_VERSION` ones that
are set up by CMake if one provides the "VERSION" keyword to the
`project()` call. While this is one more moving target we need to adjust
on releases, this commit also adjusts our release script to verify that
the project version was incremented as expected.
|
|
|
325375e3
|
2020-07-09T23:12:58
|
|
Merge pull request #5568 from lhchavez/ubsan
Make the tests run cleanly under UndefinedBehaviorSanitizer
|
|
|
2ffa426e
|
2020-07-09T23:02:05
|
|
Merge pull request #5567 from lhchavez/msan
Make the tests pass cleanly with MemorySanitizer
|
|
dc1deb3b
|
2020-07-01T15:41:38
|
|
Use __GNUC__ macro in the resource script
Fix the default LIBGIT2_FILENAME for GNU windres
|
|
|
71000441
|
2020-06-16T18:58:07
|
|
Review: Rename the stringize macro
|
|
|
5c40456b
|
2020-06-16T13:19:02
|
|
Enable building git2.rc resource script with GCC
|
|
|
3a197ea7
|
2020-06-27T12:33:32
|
|
Make the tests pass cleanly with MemorySanitizer
This change:
* Initializes a few variables that were being read before being
initialized.
* Includes https://github.com/madler/zlib/pull/393. As such,
it only works reliably with `-DUSE_BUNDLED_ZLIB=ON`.
|
|
|
d0656ac8
|
2020-06-27T12:15:26
|
|
Make the tests run cleanly under UndefinedBehaviorSanitizer
This change makes the tests run cleanly under
`-fsanitize=undefined,nullability` and comprises of:
* Avoids some arithmetic with NULL pointers (which UBSan does not like).
* Avoids an overflow in a shift, due to an uint8_t being implicitly
converted to a signed 32-bit signed integer after being shifted by a
32-bit signed integer.
* Avoids a unaligned read in libgit2.
* Ignores unaligned reads in the SHA1 library, since it only happens on
Intel processors, where it is _still_ undefined behavior, but the
semantics are moderately well-understood.
Of notable omission is `-fsanitize=integer`, since there are lots of
warnings in zlib and the SHA1 library which probably don't make sense to
fix and I could not figure out how to silence easily. libgit2 itself
also has ~100s of warnings which are mostly innocuous (e.g. use of enum
constants that only fit on an `uint32_t`, but there is no way to do that
in a simple fashion because the data type chosen for enumerated types is
implementation-defined), and investigating whether there are worrying
warnings would need reducing the noise significantly.
|
|
|
eab2b044
|
2020-06-26T16:10:30
|
|
Review feedback
* Change the default of the file limit to 0 (unlimited).
* Changed the heuristic to close files to be the file that contains the
least-recently-used window such that the window is the
most-recently-used in the file, and the file does not have in-use
windows.
* Parameterized the filelimit test to check for a limit of 1 and 100
open windows.
|
|
|
9679df57
|
2020-02-08T20:47:24
|
|
mwindow: set limit on number of open files
There are some cases in which repositories accrue a large number of
packfiles. The existing mwindow limit applies only to the total size of
mmap'd files, not on their number. This leads to a situation in which
having lots of small packfiles could exhaust the allowed number of open
files, particularly on macOS, where the default ulimit is very low
(256).
This change adds a new configuration parameter
(GIT_OPT_SET_MWINDOW_FILE_LIMIT) that sets the maximum number of open
packfiles, with a default of 128. This is low enough so that even macOS
users should not hit it during normal use.
Based on PR #5386, originally written by @josharian.
Fixes: #2758
|
|
|
490d0c9c
|
2020-06-15T14:26:13
|
|
diff_print: return out-of-memory situation when printing binary
We currently don't check for out-of-memory situations on exiting
`format_binary` and, as a result, may return a partially filled buffer.
Fix this by checking the buffer via `git_buf_oom`.
|
|
|
bea5fd9f
|
2020-06-15T13:26:18
|
|
diff_print: do not call abort(3P)
Calling abort(3P) in a library is rather rude and shouldn't happen, as
we effectively prohibit any corrective actions made by the application
linking to it. We thus shouldn't call it at all, but instead use our new
`GIT_ASSERT` macros.
Remove the call to abort(3P) in case a diff delta has an unexpected type
to fix this.
|
|
|
0cf1f444
|
2020-06-15T13:19:44
|
|
diff_print: handle errors when printing to file
When printing the diff to a `FILE *` handle, we neither check the return
value of fputc(3P) nor the one of fwrite(3P). As a result, we'll
silently return successful even if we didn't print anything at all.
Futhermore, the arguments to fwrite(3P) are reversed: we have one item
of length `content_len`, and not `content_len` items of one byte.
Fix both issues by checking return values as well as reversing the
arguments to fwrite(3P).
|
|
|
6256d023
|
2020-06-15T14:34:29
|
|
diff_print: adjust code to match current coding style
|
|
|
74520b91
|
2020-06-13T19:38:11
|
|
Merge pull request #5552 from libgit2/pks/small-fixes
Random code cleanups and fixes
|
|
|
03c4f86c
|
2020-06-08T12:42:59
|
|
cmake: enable warnings for missing function declarations
Over time, we have accumulated quite a lot of functions with missing
prototypes, missing `static` keywords or which were completely unused.
It's easy to miss these mistakes, but luckily GCC and Clang both have
the `-Wmissing-declarations` warning. Enabling this will cause them to
emit warnings for every not-static function that doesn't have a previous
declaration. This is a very sane thing to enable, and with the preceding
commits all these new warnings have been fixed.
So let's always enable this warning so we won't introduce new instances
of them.
|
|
|
fd1f0940
|
2020-06-08T12:42:26
|
|
refs: add missing function declaration
The function `git_reference__is_note` is not declared anywhere. Let's
add the declaration to avoid having non-static functions without
declaration.
|
|
|
c6184f0c
|
2020-06-08T21:07:36
|
|
tree-wide: do not compile deprecated functions with hard deprecation
When compiling libgit2 with -DDEPRECATE_HARD, we add a preprocessor
definition `GIT_DEPRECATE_HARD` which causes the "git2/deprecated.h"
header to be empty. As a result, no function declarations are made
available to callers, but the implementations are still available to
link against. This has the problem that function declarations also
aren't visible to the implementations, meaning that the symbol's
visibility will not be set up correctly. As a result, the resulting
library may not expose those deprecated symbols at all on some platforms
and thus cause linking errors.
Fix the issue by conditionally compiling deprecated functions, only.
While it becomes impossible to link against such a library in case one
uses deprecated functions, distributors of libgit2 aren't expected to
pass -DDEPRECATE_HARD anyway. Instead, users of libgit2 should manually
define GIT_DEPRECATE_HARD to hide deprecated functions. Using "real"
hard deprecation still makes sense in the context of CI to test we don't
use deprecated symbols ourselves and in case a dependant uses libgit2 in
a vendored way and knows it won't ever use any of the deprecated symbols
anyway.
|
|
|
6e1efcd6
|
2020-06-08T12:46:04
|
|
tree-wide: add missing header includes
We're missing some header includes leading to missing function
prototypes. While we currently don't warn about these, we should have
their respective headers included in order to detect the case where a
function signature change results in an incompatibility.
|
|
|
a6c9e0b3
|
2020-06-08T12:40:47
|
|
tree-wide: mark local functions as static
We've accumulated quite some functions which are never used outside of
their respective code unit, but which are lacking the `static` keyword.
Add it to reduce their linkage scope and allow the compiler to optimize
better.
|
|
|
7c499b54
|
2020-06-08T12:39:09
|
|
tree-wide: remove unused functions
We have some functions which aren't used anywhere. Let's remove them to
get rid of unneeded baggage.
|
|
|
46637b5e
|
2020-06-08T14:47:01
|
|
checkout: remove unused code for deferred removals
With commit 05f690122 (checkout: remove blocking dir when FORCEd,
2015-03-31), the last case was removde that actually queued a deferred
removal. This is now more than five years in the past and nobody
complained, so we can rest quite assured that the deferred removal is
not really needed at all.
Let's remove all related code to simplify the already complicated
checkout logic.
|
|
|
45901d3e
|
2020-06-08T12:57:16
|
|
revparse: remove superfluous tab character
|
|
|
c146374c
|
2020-06-08T12:54:26
|
|
revparse: detect out-of-memory cases when parsing curly brace contents
When extracting curly braces (e.g. the "upstream" part in
"HEAD@{upstream}"), we put the curly braces' contents into a `git_buf`
structure, but don't check the return value of `git_buf_putc`. So when
we run out-of-memory, we'll use a partially filled buffer without
noticing.
Let's fix this issue by checking `git_buf_putc`'s return value.
|
|
|
53a8f463
|
2020-06-03T07:40:59
|
|
Merge pull request #5536 from libgit2/ethomson/http
httpclient: support googlesource
|
|
|
6de8aa7f
|
2020-06-02T12:21:22
|
|
Merge pull request #5532 from joshtriplett/pack-default-path
git_packbuilder_write: Allow setting path to NULL to use the default path
|
|
|
22f9a0fc
|
2020-06-02T12:12:41
|
|
Merge pull request #5531 from joshtriplett/mempack-threads
mempack: Use threads when building the pack
|
|
|
04c7bdb4
|
2020-06-01T22:44:14
|
|
httpclient: clear the read_buf on new requests
The httpclient implementation keeps a `read_buf` that holds the data
in the body of the response after the headers have been written. We
store that data for subsequent calls to `git_http_client_read_body`. If
we want to stop reading body data and send another request, we need to
clear that cached data.
Clear the cached body data on new requests, just like we read any
outstanding data from the socket.
|
|
|
aa8b2c0f
|
2020-06-01T23:53:55
|
|
httpclient: don't read more than the client wants
When `git_http_client_read_body` is invoked, it provides the size of the
buffer that can be read into. This will be set as the parser context's
`output_size` member. Use this as an upper limit on our reads, and
ensure that we do not read more than the client requests.
|
|
|
51eff5a5
|
2020-05-29T13:13:19
|
|
strarray: we should `dispose` instead of `free`
We _dispose_ the contents of objects; we _free_ objects (and their
contents). Update `git_strarray_free` to be `git_strarray_dispose`.
`git_strarray_free` remains as a deprecated proxy function.
|
|
|
a9746b30
|
2020-05-29T11:21:55
|
|
strarray: move to its own file
|
|
|
570f0340
|
2020-06-01T19:10:38
|
|
httpclient: read_body should return 0 at EOF
When users call `git_http_client_read_body`, it should return 0 at the
end of a message. When the `on_message_complete` callback is called,
this will set `client->state` to `DONE`. In our read loop, we look for
this condition and exit.
Without this, when there is no data left except the end of message chunk
(`0\r\n`) in the http stream, we would block by reading the three bytes
off the stream but not making progress in any `on_body` callbacks.
Listening to the `on_message_complete` callback allows us to stop trying
to read from the socket when we've read the end of message chunk.
|
|
|
17641f1f
|
2020-06-01T15:05:51
|
|
Merge pull request #5526 from libgit2/ethomson/poolinit
git_pool_init: allow the function to fail
|
|
|
0f35efeb
|
2020-05-23T10:15:51
|
|
git_pool_init: handle failure cases
Propagate failures caused by pool initialization errors.
|
|
|
1bbdf15d
|
2020-06-01T13:57:12
|
|
Merge pull request #5527 from libgit2/ethomson/config_unreadable
Handle unreadable configuration files
|
|
d1409f48
|
2020-05-06T19:57:07
|
|
config: ignore unreadable configuration files
Modified `config_file_open()` so it returns 0 if the config file is
not readable, which happens on global config files under macOS
sandboxing (note that for some reason `access(F_OK)` DOES work with
sandboxing, but it is lying). Without this read check sandboxed
applications on macOS can not open any repository, because
`config_file_read()` will return GIT_ERROR when it cannot read the
global /Users/username/.gitconfig file, and the upper layers will
just completely abort on GIT_ERROR when attempting to load the
global config file, so no repositories can be opened.
|
|
8c96d56d
|
2020-05-26T04:53:09
|
|
index: write v4: bugfix: prefix path with strip_len, not same_len
According to index-format.txt of git, the path of an entry is prefixed
with N, where N indicates the length of bytes to be stripped.
|
|
5278a006
|
2020-05-23T16:07:54
|
|
git_packbuilder_write: Allow setting path to NULL to use the default path
If given a NULL path, write to the object path of the repository.
Add tests for the new behavior.
|
|
|
0bc091dd
|
2020-05-23T15:35:38
|
|
git_packbuilder_write: Unify cleanup path
Clean up and return via a single label, to avoid duplicate error
handling before each return, and to make it easier to extend the set of
cleanups needed.
|
|
|
30285a3c
|
2020-05-23T15:04:19
|
|
mempack: Use threads when building the pack
The mempack ODB backend creates a packbuilder internally to write out a
pack; call git_packbuilder_set_threads on that packbuilder, to use
threads for packing if available.
|
|
|
27cb4e0e
|
2020-05-23T11:02:07
|
|
Merge pull request #5522 from pks-t/pks/openssl-cert-memleak
OpenSSL certificate memory leak
|
|
|
abfdb8a6
|
2020-05-23T10:15:37
|
|
git_pool_init: return an int
Let `git_pool_init` return an int so that it could fail.
|
|
|
e4bdba56
|
2020-05-23T09:57:22
|
|
Merge pull request #5515 from pks-t/pks/flaky-checkout-test
tests: checkout: fix flaky test due to mtime race
|
|
|
3b7b4d27
|
2020-05-23T09:40:55
|
|
Merge pull request #5523 from libgit2/pks/cmake-sort-reproducible-builds
cmake: Sort source files for reproducible builds
|
|
|
3f201f75
|
2020-05-16T13:48:04
|
|
checkout: fix file being treated as unmodified due to racy index
When trying to determine whether a file changed, we try to avoid heavy
operations by fist taking a look at the index, seeing whether the index
entry is modified already. This doesn't seem to cut it, though, as we
currently have the racy checkout::index::can_disable_pathspec_match test
case: sometimes the files get restored to their original contents,
sometimes they aren't.
The issue is caused by a racy index [1]: in case we modify a file, add
it to the index and then modify it again in-place without changing its
file, then we may end up with a modified file that has the same stat(3P)
info as we've currently got it in its corresponding index entry. The
mitigation for this is to treat files with the same mtime as the index
are treated as racily modified. We already have this logic in place for
the index, but not when doing a checkout.
Fix the issue by only consulting the index entry in case it has an older
mtime as the index. Previously, the following script reliably had at
least 20 failures, while now there is no failure to be observed anymore:
```bash
j=0
for i in $(seq 100)
do
if ! ./libgit2_clar -scheckout::index::can_disable_pathspec_match >/dev/null
then
j=$(($j + 1))
fi
done
echo "Failures: $j"
```
[1]: https://git-scm.com/docs/racy-git
|
|
|
b85eefb4
|
2020-05-15T19:52:40
|
|
cmake: Sort source files for reproducible builds
We currently use `FILE(GLOB ...)` in most places to find source and
header files. This is problematic in that the order of files returned
depends on the operating system's directory iteration order and may thus
not be deterministic. As a result, we link object files in unspecified
order, which may cause the linker to emit different code across runs.
Fix this issue by sorting all code used as input to the libgit2 library
to improve the reliability of reproducible builds.
|
|
|
b43a9e66
|
2020-05-15T17:46:24
|
|
streams: openssl: fix memleak due to us not free'ing certs
When creating a `git_cert` from the OpenSSL X509 certificate of a given
stream, we do not call `X509_free()` on the certificate, leading to a
memory leak as soon as the certificate is requested e.g. by the
certificate check callback.
Fix the issue by properly calling `X509_free()`.
|
|
|
a2eca682
|
2020-05-12T21:35:07
|
|
futils: fix order of declared parameters for `git_futils_fake_symlink`
While the function `git_futils_fake_symlink` is declared with arguments
`new, old`, the implementation uses the reverse order `old, new`. Let's
fix the ordering issues to be `new, old` for both, which matches what
symlink(3P) has. While at it, we also rename these parameters: `old` and
`new` doesn't really make a lot of sense in the context of symlinks,
which is why this commit renames them to be called `target` and `path`.
|
|
|
cbae1c21
|
2020-04-01T22:12:07
|
|
assert: allow non-int returning functions to assert
Include GIT_ASSERT_WITH_RETVAL and GIT_ASSERT_ARG_WITH_RETVAL so that
functions that do not return int (or more precisely, where `-1` would
not be an error code) can assert.
This allows functions that return, eg, NULL on an error code to do that
by passing the return value (in this example, `NULL`) as a second
parameter to the GIT_ASSERT_WITH_RETVAL functions.
|
|
|
a95096ba
|
2020-01-12T10:31:07
|
|
assert: optionally fall-back to assert(3)
Fall back to the system assert(3) in debug builds, which may aide
in debugging.
"Safe" assertions can be enabled in debug builds by setting
GIT_ASSERT_HARD=0. Similarly, hard assertions can be enabled in
release builds by setting GIT_ASSERT_HARD to nonzero.
|
|
|
abe2efe1
|
2019-12-09T12:37:34
|
|
Introduce GIT_ASSERT macros
Provide macros to replace usages of `assert`. A true `assert` is
punishing as a library. Instead we should do our best to not crash.
GIT_ASSERT_ARG(x) will now assert that the given argument complies to
some format and sets an error message and returns `-1` if it does not.
GIT_ASSERT(x) is for internal usage, and available as an internal
consistency check. It will set an error message and return `-1` in the
event of failure.
|
|
56c95cf6
|
2020-05-10T21:43:38
|
|
Fix uninitialized stack memory and NULL ptr dereference in stash_to_index
Caught by static analysis.
|
|
d62e44cb
|
2019-06-03T18:35:08
|
|
checkout: Fix removing untracked files by path in subdirectories
The checkout code didn't iterate into a subdir if it didn't match the
pathspec, but since the pathspec might match files in the subdir we
should recurse into it (In contrast to gitignore handling).
Fixes #5089
|
|
|
63de2128
|
2020-02-02T20:20:19
|
|
checkout: filter pathspecs for _all_ checkout types
We were previously applying the pathspec filter for the baseline
iterator during checkout, as well as the target tree. This was an
oversight; in fact, we should apply the pathspec filter to _all_
checkout targets, not just trees.
Add a helper function to set the iterator pathspecs from the given
checkout pathspecs, and call it everywhere.
|
|
|
898caead
|
2020-05-10T19:03:10
|
|
Merge pull request #5431 from libgit2/ethomson/hexdump
git__hexdump: better mimic `hexdump -C`
|
|
9830ab3d
|
2020-01-29T02:00:04
|
|
blame: add option to ignore whitespace changes
|
|
|
e9b0cfc0
|
2020-04-05T13:24:13
|
|
Merge pull request #5485 from libgit2/ethomson/sysdir_unused
sysdir: remove unused git_sysdir_get_str
|
|
|
b6f18db9
|
2020-04-05T11:16:29
|
|
sysdir: remove unused git_sysdir_get_str
|
|
ce2ab78f
|
2020-04-04T16:35:33
|
|
Fix typo causing removal of symbol 'git_worktree_prune_init_options'
Commit 0b5ba0d replaced this function with an "option_init"
equivallent, but misspelled the replacement function. As a result, this
symbol has been missing from libgit2.so ever since.
|
|
|
ad341eb7
|
2020-04-04T13:40:14
|
|
Merge pull request #5425 from lhchavez/fix-get-delta-base
pack: Improve error handling for get_delta_base()
|
|
|
966db47d
|
2020-04-04T13:21:02
|
|
Merge pull request #5477 from pks-t/pks/rename-detection-negative-caches
merge: cache negative cache results for similarity metrics
|
|
|
4d4c8e0a
|
2020-04-02T07:34:55
|
|
Re-adding the "delta offset is zero" error case
|
|
|
dfd7fcc4
|
2020-04-02T13:26:13
|
|
Merge pull request #5388 from bk2204/repo-format-v1
Handle repository format v1
|
|
|
b8eec0b2
|
2020-04-01T22:22:38
|
|
Merge pull request #5461 from pks-t/pks/refdb-fs-unused-header
refdb_fs: remove unused header file
|
|
|
5d37128d
|
2020-03-01T10:34:15
|
|
git__hexdump: better mimic `hexdump -C`
|
|
|
ba59a4a2
|
2020-04-01T12:34:16
|
|
Making get_delta_base() conform to the general error-handling pattern
This makes get_delta_base() return the error code as the return value
and the delta base as an out-parameter.
|
|
|
f3273725
|
2020-02-25T20:58:09
|
|
pack: Improve error handling for get_delta_base()
This change moves the responsibility of setting the error upon failures
of get_delta_base() to get_delta_base() instead of its callers. That
way, the caller chan always check if the return value is negative and
mark the whole operation as an error instead of using garbage values,
which can lead to crashes if the .pack files are malformed.
|
|
|
4dfcc50f
|
2020-04-01T15:16:18
|
|
merge: cache negative cache results for similarity metrics
When computing renames, we cache the hash signatures for each of the
potentially conflicting entries so that we do not need to repeatedly
read the file and can at least halfway efficiently determine whether two
files are similar enough to be deemed a rename. In order to make the
hash signatures meaningful, we require at least four lines of data to be
present, resulting in at least four different hashes that can be
compared. Files that are deemed too small are not cached at all and
will thus be repeatedly re-hashed, which is usually not a huge issue.
The issue with above heuristic is in case a file does _not_ have at
least four lines, where a line is anything separated by a consecutive
run of "\n" or "\0" characters. For example "a\nb" is two lines, but
"a\0\0b" is also just two lines. Taken to the extreme, a file that has
megabytes of consecutive space- or NUL-only may also be deemed as too
small and thus not get cached. As a result, we will repeatedly load its
blob, calculate its hash signature just to finally throw it away as we
notice it's not of any value. When you've got a comparitively big file
that you compare against a big set of potentially renamed files, then
the cost simply expodes.
The issue can be trivially fixed by introducing negative cache entries.
Whenever we determine that a given blob does not have a meaningful
representation via a hash signature, we store this negative cache marker
and will from then on not hash it again, but also ignore it as a
potential rename target. This should help the "normal" case already
where you have a lot of small files as rename candidates, but in the
above scenario it's savings are extraordinarily high.
To verify we do not hit the issue anymore with described solution, this
commit adds a test that uses the exact same setup described above with
one 50 megabyte blob of '\0' characters and 1000 other files that get
renamed. Without the negative cache:
$ time ./libgit2_clar -smerge::trees::renames::cache_recomputation >/dev/null
real 11m48.377s
user 11m11.576s
sys 0m35.187s
And with the negative cache:
$ time ./libgit2_clar -smerge::trees::renames::cache_recomputation >/dev/null
real 0m1.972s
user 0m1.851s
sys 0m0.118s
So this represents a ~350-fold performance improvement, but it obviously
depends on how many files you have and how big the blob is. The test
number were chosen in a way that one will immediately notice as soon as
the bug resurfaces.
|
|
|
5f47cb48
|
2020-03-26T14:16:41
|
|
patch: correctly handle mode changes for renames
When generating a patch for a renamed file whose mode bits have changed
in addition to the rename, then we currently fail to parse the generated
patch. Furthermore, when generating a diff we output mode bits after the
similarity metric, which is different to how upstream git handles it.
Fix both issues by adding another state transition that allows
similarity indices after mode changes and by printing mode changes
before the similarity index.
|
|
|
bba9599a
|
2020-03-26T11:56:10
|
|
Merge pull request #5445 from lhchavez/fix-5443
Fix segfault when calling git_blame_buffer()
|
|
e7a1fd88
|
2020-03-26T11:42:47
|
|
Fix spelling error
Signed-off-by: Utkarsh Gupta <utkarsh@debian.org>
|
|
|
74e0489a
|
2020-03-24T19:42:10
|
|
refdb_fs: remove unused header file
The "refdb_fs.h" header contains a single struct `git_refcache` that is
not used anywhere. As a result, we can just delete the header altogether
as it doesn't have any purpose and may confuse readers.
|
|
|
62d59467
|
2020-03-08T02:13:11
|
|
Fix segfault when calling git_blame_buffer()
This change makes sure that the hunk is not null before trying to
dereference it. This avoids segfaults, especially when blaming against a
modified buffer (i.e. the index).
Fixes: #5443
|
|
|
a2d3316a
|
2020-03-13T23:01:11
|
|
refdb_fs: initialize backend version
While the `git_refdb_backend()` struct has a version, we do not
initialize it correctly when calling `git_refdb_backend_fs()`. Fix this
by adding the call to `git_refdb_init_backend()`.
|
|
|
9a102446
|
2020-03-21T16:49:44
|
|
Merge pull request #5455 from pks-t/pks/cmake-install-dirs
cmake: use install directories provided via GNUInstallDirs
|
|
|
87fc539f
|
2020-03-13T22:08:19
|
|
cmake: use install directories provided via GNUInstallDirs
We currently hand-code logic to configure where to install our artifacts
via the `LIB_INSTALL_DIR`, `INCLUDE_INSTALL_DIR` and `BIN_INSTALL_DIR`
variables. This is reinventing the wheel, as CMake already provide a way
to do that via `CMAKE_INSTALL_<DIR>` paths, e.g. `CMAKE_INSTALL_LIB`.
This requires users of libgit2 to know about the discrepancy and will
require special hacks for any build systems that handle these variables
in an automated way. One such example is Gentoo Linux, which sets up
these paths in both the cmake and cmake-utils eclass.
So let's stop doing that: the GNUInstallDirs module handles it in a
better way for us, especially so as the actual values are dependent on
CMAKE_INSTALL_PREFIX. This commit removes our own set of variables and
instead refers users to use the standard ones.
As a second benefit, this commit also fixes our pkgconfig generation to
use the GNUInstallDirs module. We had a bug there where we ignored the
CMAKE_INSTALL_PREFIX when configuring the libdir and includedir keys, so
if libdir was set to "lib64", then libdir would be an invalid path. With
GNUInstallDirs, we can now use `CMAKE_INSTALL_FULL_LIBDIR`, which
handles the prefix for us.
|
|
|
b1f6481f
|
2020-03-10T22:07:35
|
|
cmake: ignore deprecation notes for Secure Transport
The Secure Transport interface we're currently using has been deprecated
with macOS 10.15. As we're currently in code freeze, we cannot migrate
to newer interfaces. As such, let's disable deprecation warnings for
our "schannel.c" stream.
|
|
|
43d7a42b
|
2020-03-08T18:14:09
|
|
win32: don't canonicalize symlink targets
Don't canonicalize symlink targets; our win32 path canonicalization
routines expect an absolute path. In particular, using the path
canonicalization routines for symlink targets (introduced in commit
7d55bee6d, "win32: fix relative symlinks pointing into dirs",
2020-01-10).
Now, use the utf8 -> utf16 relative path handling functions, so that
paths like "../foo" will be translated to "..\foo".
|
|
|
f2b114ba
|
2020-03-08T18:11:45
|
|
win32: introduce relative path handling function
Add a function that takes a (possibly) relative UTF-8 path and emits a
UTF-16 path with forward slashes translated to backslashes. If the
given path is, in fact, absolute, it will be translated to absolute path
handling rules.
|
|
|
fb7da154
|
2020-03-08T16:34:23
|
|
win32: clarify usage of path canonicalization funcs
The path canonicalization functions on win32 are intended to
canonicalize absolute paths; those with prefixes. In other words,
things start with drive letters (`C:\`), share names (`\\server\share`),
or other prefixes (`\\?\`).
This function removes leading `..` that occur after the prefix but
before the directory/file portion (eg, turning `C:\..\..\..\foo` into
`C:\foo`). This translation is not appropriate for local paths.
|
|
|
e23b8b44
|
2020-03-06T17:13:48
|
|
Merge pull request #5422 from pks-t/pks/cmake-booleans
CMake booleans
|
|
|
8eb1fc36
|
2020-03-06T17:12:18
|
|
Merge pull request #5439 from ignatenkobrain/patch-2
Set proper pkg-config dependency for pcre2
|
|
|
502e5d51
|
2020-03-01T12:44:39
|
|
httpclient: use a 16kb read buffer for macOS
Use a 16kb read buffer for compatibility with macOS SecureTransport.
SecureTransport `SSLRead` has the following behavior:
1. It will return _at most_ one TLS packet's worth of data, and
2. It will try to give you as much data as you asked for
This means that if you call `SSLRead` with a buffer size that is smaller
than what _it_ reads (in other words, the maximum size of a TLS packet),
then it will buffer that data for subsequent calls. However, it will
also attempt to give you as much data as you requested in your SSLRead
call. This means that it will guarantee a network read in the event
that it has buffered data.
Consider our 8kb buffer and a server sending us 12kb of data on an HTTP
Keep-Alive session. Our first `SSLRead` will read the TLS packet off
the network. It will return us the 8kb that we requested and buffer the
remaining 4kb. Our second `SSLRead` call will see the 4kb that's
buffered and decide that it could give us an additional 4kb. So it will
do a network read.
But there's nothing left to read; that was the end of the data. The
HTTP server is waiting for us to provide a new request. The server will
eventually time out, our `read` system call will return, `SSLRead` can
return back to us and we can make progress.
While technically correct, this is wildly ineffecient. (Thanks, Tim
Apple!)
Moving us to use an internal buffer that is the maximum size of a TLS
packet (16kb) ensures that `SSLRead` will never buffer and it will
always return everything that it read (albeit decrypted).
|
|
dd704944
|
2020-03-03T11:05:04
|
|
Set proper pkg-config dependency for pcre2
Signed-off-by: Igor Raits <i.gnatenko.brain@gmail.com>
|
|
|
a48da8fa
|
2020-02-25T22:49:16
|
|
Merge pull request #5417 from pks-t/pks/ntlmclient-htonll
deps: ntlmclient: fix missing htonll symbols on FreeBSD and SunOS
|
|
|
ebade233
|
2020-02-24T21:49:43
|
|
transports: auth_ntlm: fix use of strdup/strndup
In the NTLM authentication code, we accidentally use strdup(3P) and
strndup(3P) instead of our own wrappers git__strdup and git__strndup,
respectively.
Fix the issue by using our own functions.
|
|
|
d8e71cb2
|
2020-02-24T21:07:34
|
|
cmake: fix ENABLE_TRACE parameter being too strict
In order to check whether tracing support should be turned on, we check
whether ENABLE_TRACE equals "ON". This is being much too strict, as
CMake will also treat "on", "true", "yes" and others as true-ish, but
passing them will disable tracing support now.
Fix the issue by simply removing the STREQUAL, which will cause CMake to
do the right thing automatically.
|
|
ff46c5d3
|
2020-02-20T20:47:22
|
|
Fix typo on GIT_USE_NEC
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
4f1923e8
|
2020-02-19T12:14:32
|
|
Merge pull request #5390 from pks-t/pks/sha1-lookup
sha1_lookup: inline its only function into "pack.c"
|