kmx git

Commit	Date	Message
bd4ca902	2012-05-16T17:02:06	Fix status for files under ignored dirs There was a bug where tracked files inside directories that were inside ignored directories where not being found by status. To make that a little clearer, if you have a .gitignore with: ignore/ And then have the following files: ignore/dir/tracked <-- actually a tracked file ignore/dir/untracked <-- should be ignored Then we would show the tracked file as being removed (because when we got the to contained item "dir/" inside the ignored directory, we decided it was safe to skip -- bzzt, wrong!). This update is much more careful about checking that we are not skipping over any prefix of a tracked item, regardless of whether it is ignored or not. As documented in diff.c, this commit does create behavior that still differs from core git with regards to the handling of untracked files contained inside ignored directories. With libgit2, those files will just not show up in status or diff. With core git, those files don't show up in status or diff either unless they are explicitly ignored by a .gitignore pattern in which case they show up as ignored files. Needless to say, this is a local behavior difference only, so it should not be important and (to me) the libgit2 behavior seems more consistent.
41a82592	2012-05-15T14:17:39	Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.
dc13f1f7	2012-05-10T11:08:59	Add cache busting to attribute cache This makes the git attributes and git ignores cache check stat information before using the file contents from the cache. For cached files from the index, it checks the SHA of the file instead. This should reduce the need to ever call `git_attr_cache_flush()` in most situations. This commit also fixes the `git_status_should_ignore` API to use the libgit2 standard parameter ordering.
7e000ab2	2012-05-08T15:03:59	Add support for diffing index with no HEAD When a repo is first created, there is no HEAD yet and attempting to diff files in the index was showing nothing because a tree iterator could not be constructed. This adds an "empty" iterator and falls back on that when the head cannot be looked up.
19579847	2012-05-08T13:23:00	Clean up warnings and tests
722c08af	2012-05-07T21:21:48	status: Prevent git_status_file() from returning ENOTFOUND when not applicable
f917481e	2012-05-03T16:37:25	Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.
d58336dd	2012-04-26T10:51:45	Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.
44ef8b1b	2012-04-13T13:00:10	Fix warnings on 64-bit windows builds This fixes all the warnings on win64 except those in deps, which come from the regex code.
0a20eee9	2012-04-11T03:43:30	Merge pull request #619 from nulltoken/topic/branches Basic branch management API
555aa453	2012-04-09T02:28:31	fileops: Make git_futils_mkdir_r() able to skip non-empty directories
8e8b6b01	2012-04-04T13:13:43	Clean up valgrind warnings
bfc9ca59	2012-03-28T16:45:36	Added submodule API and use in status When processing status for a newly checked out repo, it is possible that there will be submodules that have not yet been initialized. The only way to distinguish these from untracked directories is to have some knowledge of submodules. This commit adds a new submodule API which, given a name or path, can determine if it appears to be a submodule and can give information about the submodule.
277e3041	2012-03-26T11:22:27	Fix handling of submodules in trees
c8838ee9	2012-03-23T11:03:01	Restore default status recursion behavior This gives `git_status_foreach()` back its old behavior of emulating the "--untracked=all" behavior of git. You can get any of the various --untracked options by passing flags to `git_status_foreach_ext()` but the basic version will keep the behavior it has always had.
4b136a94	2012-03-23T09:26:09	Fix crash in new status and add recurse option This fixes the bug that @nulltoken found (thank you!) where if there were untracked directories alphabetically after the last tracked item, the diff implementation would deref a NULL pointer. The fix involved the code which decides if it is necessary to recurse into a directory in the working dir, so it was easy to add a new option `GIT_STATUS_OPT_RECURSE_UNTRACKED_DIRS` to control if the contents of untracked directories should be included in status.
98c4613e	2012-03-22T13:10:23	Migrate remaining status tests to Clar This finishes up the migration of remaining tests from tests/t18-status.c over the tests-clar/status/worktree.c.
a56aacf4	2012-03-22T12:03:30	More status testing This "fixes" the broken t18 status tests to accurately reflect the new behavior for "created" untracked subdirectories. See discussion in the PR for more details. This also contains the submodules unit test that I forgot to git add, and ports most of the t18-status.c tests to clar (still missing a couple of the git_status_file() single file tests).
95340398	2012-03-22T09:17:34	Adding new tests for new status command This is a work in progress. This adds two new sets of tests, the issue_592 tests from @nulltoken's pull request #601 and some new tests for submodules. The submodule tests still have issues where the status is not reported correctly. That needs to be fixed before merge.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
e1bcc191	2012-03-01T11:45:00	Revert GIT_STATUS constants to avoid issues This reverts the changes to the GIT_STATUS constants and adds a new enumeration to describe the type of change in a git_diff_delta. I don't love this solution, but it should prevent strange errors from occurring for now. Eventually, I would like to unify the various status constants, but it needs a larger plan and I just wanted to eliminate this breakage quickly.
854eccbb	2012-02-29T12:04:59	Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing count++ but meant to do (count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.
74fa4bfa	2012-02-28T16:14:47	Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.
e8c96ed2	2012-02-01T12:30:35	Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.
3fd1520c	2012-01-24T20:35:15	Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

bd4ca902

2012-05-16T17:02:06

Fix status for files under ignored dirs There was a bug where tracked files inside directories that were inside ignored directories where not being found by status. To make that a little clearer, if you have a .gitignore with: ignore/ And then have the following files: ignore/dir/tracked <-- actually a tracked file ignore/dir/untracked <-- should be ignored Then we would show the tracked file as being removed (because when we got the to contained item "dir/" inside the ignored directory, we decided it was safe to skip -- bzzt, wrong!). This update is much more careful about checking that we are not skipping over any prefix of a tracked item, regardless of whether it is ignored or not. As documented in diff.c, this commit does create behavior that still differs from core git with regards to the handling of untracked files contained inside ignored directories. With libgit2, those files will just not show up in status or diff. With core git, those files don't show up in status or diff either *unless* they are explicitly ignored by a .gitignore pattern in which case they show up as ignored files. Needless to say, this is a local behavior difference only, so it should not be important and (to me) the libgit2 behavior seems more consistent.

41a82592

2012-05-15T14:17:39

Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.

dc13f1f7

2012-05-10T11:08:59

Add cache busting to attribute cache This makes the git attributes and git ignores cache check stat information before using the file contents from the cache. For cached files from the index, it checks the SHA of the file instead. This should reduce the need to ever call `git_attr_cache_flush()` in most situations. This commit also fixes the `git_status_should_ignore` API to use the libgit2 standard parameter ordering.

7e000ab2

2012-05-08T15:03:59

Add support for diffing index with no HEAD When a repo is first created, there is no HEAD yet and attempting to diff files in the index was showing nothing because a tree iterator could not be constructed. This adds an "empty" iterator and falls back on that when the head cannot be looked up.

19579847

2012-05-08T13:23:00

Clean up warnings and tests

722c08af

2012-05-07T21:21:48

status: Prevent git_status_file() from returning ENOTFOUND when not applicable

f917481e

2012-05-03T16:37:25

Support reading attributes from index Depending on the operation, we need to consider gitattributes in both the work dir and the index. This adds a parameter to all of the gitattributes related functions that allows user control of attribute reading behavior (i.e. prefer workdir, prefer index, only use index). This fix also covers allowing us to check attributes (and hence do diff and status) on bare repositories. This was a somewhat larger change that I hoped because it had to change the cache key used for gitattributes files.

d58336dd

2012-04-26T10:51:45

Fix leading slash behavior in attrs/ignores We were not following the git behavior for leading slashes in path names when matching git ignores and git attribute file patterns. This should fix issue #638.

44ef8b1b

2012-04-13T13:00:10

Fix warnings on 64-bit windows builds This fixes all the warnings on win64 except those in deps, which come from the regex code.

0a20eee9

2012-04-11T03:43:30

Merge pull request #619 from nulltoken/topic/branches Basic branch management API

555aa453

2012-04-09T02:28:31

fileops: Make git_futils_mkdir_r() able to skip non-empty directories

8e8b6b01

2012-04-04T13:13:43

Clean up valgrind warnings

bfc9ca59

2012-03-28T16:45:36

Added submodule API and use in status When processing status for a newly checked out repo, it is possible that there will be submodules that have not yet been initialized. The only way to distinguish these from untracked directories is to have some knowledge of submodules. This commit adds a new submodule API which, given a name or path, can determine if it appears to be a submodule and can give information about the submodule.

277e3041

2012-03-26T11:22:27

Fix handling of submodules in trees

c8838ee9

2012-03-23T11:03:01

Restore default status recursion behavior This gives `git_status_foreach()` back its old behavior of emulating the "--untracked=all" behavior of git. You can get any of the various --untracked options by passing flags to `git_status_foreach_ext()` but the basic version will keep the behavior it has always had.

4b136a94

2012-03-23T09:26:09

Fix crash in new status and add recurse option This fixes the bug that @nulltoken found (thank you!) where if there were untracked directories alphabetically after the last tracked item, the diff implementation would deref a NULL pointer. The fix involved the code which decides if it is necessary to recurse into a directory in the working dir, so it was easy to add a new option `GIT_STATUS_OPT_RECURSE_UNTRACKED_DIRS` to control if the contents of untracked directories should be included in status.

98c4613e

2012-03-22T13:10:23

Migrate remaining status tests to Clar This finishes up the migration of remaining tests from tests/t18-status.c over the tests-clar/status/worktree.c.

a56aacf4

2012-03-22T12:03:30

More status testing This "fixes" the broken t18 status tests to accurately reflect the new behavior for "created" untracked subdirectories. See discussion in the PR for more details. This also contains the submodules unit test that I forgot to git add, and ports most of the t18-status.c tests to clar (still missing a couple of the git_status_file() single file tests).

95340398

2012-03-22T09:17:34

Adding new tests for new status command This is a work in progress. This adds two new sets of tests, the issue_592 tests from @nulltoken's pull request #601 and some new tests for submodules. The submodule tests still have issues where the status is not reported correctly. That needs to be fixed before merge.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

e1bcc191

2012-03-01T11:45:00

Revert GIT_STATUS constants to avoid issues This reverts the changes to the GIT_STATUS constants and adds a new enumeration to describe the type of change in a git_diff_delta. I don't love this solution, but it should prevent strange errors from occurring for now. Eventually, I would like to unify the various status constants, but it needs a larger plan and I just wanted to eliminate this breakage quickly.

854eccbb

2012-02-29T12:04:59

Clean up GIT_UNUSED macros on all platforms It turns out that commit 31e9cfc4cbcaf1b38cdd3dbe3282a8f57e5366a5 did not fix the GIT_USUSED behavior on all platforms. This commit walks through and really cleans things up more thoroughly, getting rid of the unnecessary stuff. To remove the use of some GIT_UNUSED, I ended up adding a couple of new iterators for hashtables that allow you to iterator just over keys or just over values. In making this change, I found a bug in the clar tests (where we were doing *count++ but meant to do (*count)++ to increment the value). I fixed that but then found the test failing because it was not really using an empty repo. So, I took some of the code that I wrote for iterator testing and moved it to clar_helpers.c, then made use of that to make it easier to open fixtures on a per test basis even within a single test file.

74fa4bfa

2012-02-28T16:14:47

Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.

e8c96ed2

2012-02-01T12:30:35

Add unit tests for recent bug fixes Add unit tests to confirm ignore directory pattern matches and to confirm that ignore and attribute files are loaded properly into the attribute file cache.

3fd1520c

2012-01-24T20:35:15

Rename the Clay test suite to Clar Clay is the name of a programming language on the makings, and we want to avoid confusions. Sorry for the huge diff!

thodg/libgit2/tests-clar/status

tests-clar/status

Log