|
a1bbc0ce
|
2014-01-25T04:14:37
|
|
merge: rename _oid() -> id()
Following the rest of the series, use 'id' when refering to the value.
|
|
|
9950bb4e
|
2014-01-24T20:23:17
|
|
diff: rename the file's 'oid' to 'id'
In the same vein as the previous commits in this series.
|
|
|
d541170c
|
2014-01-24T11:36:41
|
|
index: rename an entry's id to 'id'
This was not converted when we converted the rest, so do it now.
|
|
0ef19fe1
|
2014-01-20T17:13:55
|
|
Merge submodules
|
|
|
0e1ba46c
|
2014-01-19T20:03:13
|
|
Remove the "merge none" flag
The "merge none" (don't automerge) flag was only to aide in
merge trivial tests. We can easily determine whether merge
trivial resulted in a trivial merge or an automerge by examining
the REUC after automerge has completed.
|
|
|
e651e8e2
|
2014-01-19T15:05:08
|
|
Introduce diff3 mode for checking out conflicts
|
|
|
6b92c99b
|
2014-01-19T01:20:25
|
|
Don't try to merge binary files
|
|
|
c1d648c5
|
2014-01-08T18:29:42
|
|
merge_file should use more aggressive levels
The default merge_file level was XDL_MERGE_MINIMAL, which will
produce conflicts where there should not be in the case where
both sides were changed identically. Change the defaults to be
more aggressive (XDL_MERGE_ZEALOUS) which will more aggressively
compress non-conflicts. This matches git.git's defaults.
Increase testing around reverting a previously reverted commit to
illustrate this problem.
|
|
79194bcd
|
2013-12-13T06:20:19
|
|
Merge pull request #1986 from libgit2/rb/error-handling-cleanups
Clean up some error handling and change callback error behavior
|
|
|
86a05ef3
|
2013-12-12T17:40:40
|
|
Validate struct versions in merge, revert
|
|
9cfce273
|
2013-12-12T12:11:38
|
|
Cleanups, renames, and leak fixes
This renames git_vector_free_all to the better git_vector_free_deep
and also contains a couple of memory leak fixes based on valgrind
checks. The fixes are specifically: failure to free global dir
path variables when not compiled with threading on and failure to
free filters from the filter registry that had not be initialized
fully.
|
|
|
26c1cb91
|
2013-12-09T09:44:03
|
|
One more rename/cleanup for callback err functions
|
|
|
c7b3e1b3
|
2013-12-06T15:42:20
|
|
Some callback error check style cleanups
I find this easier to read...
|
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
|
fcd324c6
|
2013-12-06T15:04:31
|
|
Add git_vector_free_all
There are a lot of places that we call git__free on each item in
a vector and then call git_vector_free on the vector itself. This
just wraps that up into one convenient helper function.
|
|
|
dab89f9b
|
2013-12-04T21:22:57
|
|
Further EUSER and error propagation fixes
This continues auditing all the places where GIT_EUSER is being
returned and making sure to clear any existing error using the
new giterr_user_cancel helper. As a result, places that relied
on intercepting GIT_EUSER but having the old error preserved also
needed to be cleaned up to correctly stash and then retrieve the
actual error.
Additionally, as I encountered places where error codes were not
being propagated correctly, I tried to fix them up. A number of
those fixes are included in the this commit as well.
|
|
|
9f77b3f6
|
2013-11-25T14:21:34
|
|
Add config read fns with controlled error behavior
This adds `git_config__lookup_entry` which will look up a key in
a config and return either the entry or NULL if the key was not
present. Optionally, it can either suppress all errors or can
return them (although not finding the key is not an error for this
function). Unlike other accessors, this does not normalize the
config key string, so it must only be used when the key is known
to be in normalized form (i.e. all lower-case before the first dot
and after the last dot, with no invalid characters).
This also adds three high-level helper functions to look up config
values with no errors and a fallback value. The three functions
are for string, bool, and int values, and will resort to the
fallback value for any error that arises. They are:
* `git_config__get_string_force`
* `git_config__get_bool_force`
* `git_config__get_int_force`
None of them normalize the config `key` either, so they can only
be used for internal cases where the key is known to be in normal
format.
|
|
|
5588f073
|
2013-12-09T10:25:36
|
|
Clean up warnings
|
|
|
eac938d9
|
2013-12-02T14:10:04
|
|
Bare naked merge and rebase
|
|
|
bab0b9f2
|
2013-11-22T18:02:12
|
|
clean up state metadata more consistently
|
|
|
300d192f
|
2013-12-02T11:15:27
|
|
Introduce git_revert to revert a single commit
|
|
|
98eaf39a
|
2013-11-13T11:12:31
|
|
Fix warnings
|
|
8d22773f
|
2013-11-05T16:44:10
|
|
Plug git_merge() related leaks
|
|
|
039db728
|
2013-07-03T01:00:45
|
|
merge branch into current, updating workdir
|
|
|
1d3a8aeb
|
2013-11-04T18:28:57
|
|
move mode_t to filebuf_open instead of _commit
|
|
|
1d37da33
|
2013-10-30T16:25:49
|
|
merge: any non-zero return from the user is an error
This fixes #1703.
|
|
|
07fb67f9
|
2013-09-22T05:55:39
|
|
merge: reverse array and length parameter order
Make it pair up with the one for commits. This fixes #1691.
|
|
c6451624
|
2013-07-15T16:00:07
|
|
Fix some more memory leaks in error path
|
|
|
114f5a6c
|
2013-06-10T10:10:39
|
|
Reorganize diff and add basic diff driver
This is a significant reorganization of the diff code to break it
into a set of more clearly distinct files and to document the new
organization. Hopefully this will make the diff code easier to
understand and to extend.
This adds a new `git_diff_driver` object that looks of diff driver
information from the attributes and the config so that things like
function content in diff headers can be provided. The full driver
spec is not implemented in the commit - this is focused on the
reorganization of the code and putting the driver hooks in place.
This also removes a few #includes from src/repository.h that were
overbroad, but as a result required extra #includes in a variety
of places since including src/repository.h no longer results in
pulling in the whole world.
|
|
|
cee695ae
|
2013-05-31T12:18:43
|
|
Make iterators use GIT_ITEROVER & smart advance
1. internal iterators now return GIT_ITEROVER when you go past the
last item in the iteration.
2. git_iterator_advance will "advance" to the first item in the
iteration if it is called immediately after creating the
iterator, which allows a simpler idiom for basic iteration.
3. if git_iterator_advance encounters an error reading data (e.g.
a missing tree or an unreadable file), it returns the error
but also attempts to advance past the invalid data to prevent
an infinite loop.
Updated all tests and internal usage of iterators to account for
these new behaviors.
|
|
|
9c06b250
|
2013-05-16T13:04:37
|
|
merge setup
|
|
|
1fed6b07
|
2013-05-13T21:57:37
|
|
Fix trailing whitespaces
|
|
|
03c28d92
|
2013-05-06T06:45:53
|
|
Merge pull request #1526 from arrbee/cleanup-error-return-without-msg
Make sure error messages are set for most error returns
|
|
4e7c1560
|
2013-05-02T14:58:40
|
|
puns are not funny; type punning especially so
|
|
|
de19c4a9
|
2013-05-01T14:00:20
|
|
Set error when no merge base is found
|
|
e1807113
|
2013-05-01T15:31:23
|
|
merge: Warning noise
|
|
|
75d1c8c6
|
2013-04-30T17:33:11
|
|
move NAME and REUC extensions to sys/
|
|
|
0462fba5
|
2013-04-30T14:56:41
|
|
renames!
|
|
|
bec65a5e
|
2013-04-01T22:16:21
|
|
merge!
|
|
|
359fc2d2
|
2013-01-08T17:07:25
|
|
update copyrights
|
|
|
c31ae146
|
2013-01-06T18:38:29
|
|
merge cleanup should actually cleanup and the test should actually test
|
|
|
5a62d659
|
2013-01-03T12:44:09
|
|
MERGE_HEAD contents iterator
|
|
|
35560d6d
|
2013-01-03T15:53:50
|
|
expose merge metadata cleanup
|
|
|
42e50b5e
|
2013-01-03T12:44:09
|
|
MERGE_HEAD contents iterator
|
|
|
ad2bc32f
|
2013-01-03T15:53:50
|
|
expose merge metadata cleanup
|
|
|
d5e44d84
|
2012-11-29T17:02:27
|
|
Fix function name and add real error check
`revwalk.h:commit_lookup()` -> `git_revwalk__commit_lookup()`
and make `git_commit_list_parse()` do real error checking that
the item in the list is an actual commit object. Also fixed an
apparent typo in a test name.
|
|
0984c876
|
2012-11-28T18:27:43
|
|
Rename git_count_ahead_behind -> git_graph_ahead_behind
Moved it into graph.{c,h} which i created for the new "graph"
functions namespace. Also adjusted the function prototype
to use `size_t` and `const git_oid *`.
|
|
|
c6d03c95
|
2012-11-28T18:07:08
|
|
fix coding style: while( -> while (
|
|
|
bff53e54
|
2012-11-27T16:36:50
|
|
Add initial implementation of ahead-behind count
|
|
4ff192d3
|
2012-11-26T19:47:47
|
|
Move merge functions to merge.c
In so doing, promote commit_list to git_commit_list,
with its own internal API header.
|
|
|
632d8b23
|
2012-10-23T15:42:09
|
|
reset changes for merge
|