kmx git

Commit	Date	Message
5265b31c	2019-01-23T15:00:20	streams: fix callers potentially only writing partial data Similar to the write(3) function, implementations of `git_stream_write` do not guarantee that all bytes are written. Instead, they return the number of bytes that actually have been written, which may be smaller than the total number of bytes. Furthermore, due to an interface design issue, we cannot ever write more than `SSIZE_MAX` bytes at once, as otherwise we cannot represent the number of bytes written to the caller. Unfortunately, no caller of `git_stream_write` ever checks the return value, except to verify that no error occurred. Due to this, they are susceptible to the case where only partial data has been written. Fix this by introducing a new function `git_stream__write_full`. In contrast to `git_stream_write`, it will always return either success or failure, without returning the number of bytes written. Thus, it is able to write all `SIZE_MAX` bytes and loop around `git_stream_write` until all data has been written. Adjust all callers except the BIO callbacks in our mbedtls and OpenSSL streams, which already do the right thing and require the amount of bytes written.
4947216f	2019-01-21T11:11:27	git transport: only write INT_MAX bytes The transport code returns an `int` with the number of bytes written; thus only attempt to write at most `INT_MAX`.
f673e232	2018-12-27T13:47:34	git_error: use new names in internal APIs and usage Move to the `git_error` name in the internal API for error-related functions.
ecf4f33a	2018-02-08T11:14:48	Convert usage of `git_buf_free` to new `git_buf_dispose`
e9369856	2017-03-21T00:25:15	stream: Gather streams to src/streams
0c7f49dd	2017-06-30T13:39:01	Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.
909d5494	2016-12-29T12:25:15	giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one
e0be1d60	2015-10-30T18:23:17	git: put NULL check at the top
45d295e0	2015-10-30T17:51:50	git: accept NULL as argument to its stream free
ac728c24	2015-08-03T07:38:07	Handle ssh:// and git:// urls containing a '~' character. For such a path '/~/...' the leading '/' is stripped so the server will get a path starting with '~' and correctly handle it.
c5e07187	2015-03-24T14:03:51	Merge pull request #2990 from leoyanggit/custom_param Add a custom param to git_smart_subtransport_definition
2a0f67f0	2015-03-21T21:48:03	git: make sure to close the network stream In case of a bad url or other error during the connection setup, we close the stream via free.
142e5379	2015-03-17T12:49:33	Add a custom param to git_smart_subtransport_definition The smart transport has already take the payload param. For the sub transport a payload param is useful for the implementer.
392702ee	2015-02-09T23:41:13	allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.
02b4c1e2	2014-11-01T16:58:20	Port the TCP transport to the new stream API
c180c065	2014-07-09T17:58:39	Custom transport: minor cleanups * Move the transport registration mechanisms into a new header under 'sys/' because this is advanced stuff. * Remove the 'priority' argument from the registration as it adds unnecessary complexity. (Since transports cannot decline to operate, only the highest priority transport is ever executed.) Users who require per-priority transports can implement that in their custom transport themselves. * Simplify registration further by taking a scheme (eg "http") instead of a prefix (eg "http://").
dab89f9b	2013-12-04T21:22:57	Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.
c227c173	2013-11-04T11:42:14	Use http_parser_parse_url to parse urls
29b77446	2013-10-30T15:38:52	Initialize variables
630146bd	2013-02-04T13:52:18	Address feedback
8c36a3cd	2013-01-31T15:24:59	Remove double-free segfaults
cf7038a6	2013-01-31T14:04:21	Enhance url parsing to include passwords
2234b2b0	2013-01-30T19:03:58	Stash username from url (but don't use it yet)
359fc2d2	2013-01-08T17:07:25	update copyrights
6762fe08	2012-11-29T08:29:26	Remove casts of return values of type void *
613d5eb9	2012-11-28T11:42:37	Push! By schu, phkelley, and congyiwu, et al
41fb1ca0	2012-10-29T13:41:14	Reorganize transport architecture (squashed 3)
e03e71da	2012-05-14T17:54:25	network: add sideband support This lets us notify the user of what the remote end is doing while we wait for it to start sending us the packfile.
5dca2010	2012-08-03T17:08:01	Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.
ad4b5beb	2012-07-25T10:40:59	transport: store the refs in a common area Instad of each transport having its own function and logic to get to its refs, store them directly in transport. Leverage the new gitno_buffer to make the parsing and storing of the refs use common code and get rid of the git_protocol struct.
b49c8f71	2012-07-24T19:03:22	remote: use the same code to control git and http This allows us to add capabilitites to both at the same time, keeps them in sync and removes a lot of code. gitno_buffer now uses a callback to fill its buffer, allowing us to use the same interface for git and http (which uses callbacks).
114dc6e1	2012-07-24T17:10:57	network: implement multi_ack for the git transport
64d01de8	2012-07-24T14:23:16	remote: start moving the protocol to a common area For the transition, http is going to keep its own logic until the git/common code catches up with the implied multi_ack that http has. This also has the side-effect of making the code cleaner and more correct regardingt he protocol.
fdc5c38e	2012-06-05T23:03:06	transports: fix buglet
966fbdcb	2012-06-05T13:53:33	Merge pull request #697 from carlosmn/ssl Add HTTPS support
e9551e86	2012-06-02T16:52:22	Fix git_close/http_close/local_close to set the transport's connected attribute to 0.
66024c7c	2012-05-01T00:05:25	http: add https support when GnuTLS is available If it's not available, an error saying so will be returned when trying to use a https:// URL. This also unifies a lot of the network code to use git_transport in many places instead of an socket descriptor.
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
49ac5ac8	2012-05-06T13:17:25	transport git: don't use 'error' uninitialized
cd58c15c	2012-05-05T16:47:20	Merge remote-tracking branch 'scottjg/fix-mingw32' into development Conflicts: src/netops.c src/netops.h src/transports/http.c tests-clar/clar
b4b96d56	2012-05-05T13:30:33	Fix gitno_connect() error handling on Windows gitno_connect() can return an error or socket, which is fine on most platforms where sockets are file descriptors (signed int), but on Windows, SOCKET is an unsigned type, which is problematic when we are trying to test if the socket was actually a negative error code. This fix seperates the error code and socket in gitno_connect(), and fixes the error handling in do_connect() functions to compensate. It appears that git_connect() and the git-transport do_connect() functions had bugs in the non-windows cases too (leaking sockets, and not properly reporting connection error, respectively) so I went ahead and fixed those too.
3fbcac89	2012-05-02T19:56:38	Remove old and unused error codes
dee5515a	2012-04-14T18:34:50	transports: buffer the git requests before sending them Trying to send every single line immediately won't give us any speed improvement and duplicates the code we need for other transports. Make the git transport use the same buffer functions as HTTP.
7a520f5d	2012-04-13T23:19:38	fetch: use the streaming indexer when downloading a pack This changes the git_remote_download() API, but the existing one is silly, so you don't get to complain. The new API allows to know how much data has been downloaded, how many objects we expect in total and how many we've processed.
44ef8b1b	2012-04-13T13:00:10	Fix warnings on 64-bit windows builds This fixes all the warnings on win64 except those in deps, which come from the regex code.
2b386acd	2012-03-06T10:47:18	error-handling: git transport
cb8a7961	2012-03-07T00:02:55	error-handling: Repository This also includes droping `git_buf_lasterror` because it makes no sense in the new system. Note that in most of the places were it has been dropped, the code needs cleanup. I.e. GIT_ENOMEM is going away, so instead it should return a generic `-1` and obviously not throw anything.
5e0de328	2012-02-13T17:10:24	Update Copyright header Signed-off-by: schu <schu-github@schulog.org>
97769280	2011-11-30T11:27:15	Use git_buf for path storage instead of stack-based buffers This converts virtually all of the places that allocate GIT_PATH_MAX buffers on the stack for manipulating paths to use git_buf objects instead. The patch is pretty careful not to touch the public API for libgit2, so there are a few places that still use GIT_PATH_MAX. This extends and changes some details of the git_buf implementation to add a couple of extra functions and to make error handling easier. This includes serious alterations to all the path.c functions, and several of the fileops.c ones, too. Also, there are a number of new functions that parallel existing ones except that use a git_buf instead of a stack-based buffer (such as git_config_find_global_r that exists alongsize git_config_find_global). This also modifies the win32 version of p_realpath to allocate whatever buffer size is needed to accommodate the realpath instead of hardcoding a GIT_PATH_MAX limit, but that change needs to be tested still.
d88d4311	2011-11-28T08:40:40	remote: Cleanup the remotes code - Hide the remaining transports code - Drop `git_headarray`, switch to using a callback to list refs. Makes the code cleaner.
40a40e8e	2011-10-26T18:06:36	net: move the reference storage to common code
3286c408	2011-10-28T14:51:13	global: Properly use `git__` memory wrappers Ensure that all memory related functions (malloc, calloc, strdup, free, etc) are using their respective `git__` wrappers.
dfafb03b	2011-10-07T00:44:41	Move the transports to their own directory

5265b31c

2019-01-23T15:00:20

streams: fix callers potentially only writing partial data Similar to the write(3) function, implementations of `git_stream_write` do not guarantee that all bytes are written. Instead, they return the number of bytes that actually have been written, which may be smaller than the total number of bytes. Furthermore, due to an interface design issue, we cannot ever write more than `SSIZE_MAX` bytes at once, as otherwise we cannot represent the number of bytes written to the caller. Unfortunately, no caller of `git_stream_write` ever checks the return value, except to verify that no error occurred. Due to this, they are susceptible to the case where only partial data has been written. Fix this by introducing a new function `git_stream__write_full`. In contrast to `git_stream_write`, it will always return either success or failure, without returning the number of bytes written. Thus, it is able to write all `SIZE_MAX` bytes and loop around `git_stream_write` until all data has been written. Adjust all callers except the BIO callbacks in our mbedtls and OpenSSL streams, which already do the right thing and require the amount of bytes written.

4947216f

2019-01-21T11:11:27

git transport: only write INT_MAX bytes The transport code returns an `int` with the number of bytes written; thus only attempt to write at most `INT_MAX`.

f673e232

2018-12-27T13:47:34

git_error: use new names in internal APIs and usage Move to the `git_error` name in the internal API for error-related functions.

ecf4f33a

2018-02-08T11:14:48

Convert usage of `git_buf_free` to new `git_buf_dispose`

e9369856

2017-03-21T00:25:15

stream: Gather streams to src/streams

0c7f49dd

2017-06-30T13:39:01

Make sure to always include "common.h" first Next to including several files, our "common.h" header also declares various macros which are then used throughout the project. As such, we have to make sure to always include this file first in all implementation files. Otherwise, we might encounter problems or even silent behavioural differences due to macros or defines not being defined as they should be. So in fact, our header and implementation files should make sure to always include "common.h" first. This commit does so by establishing a common include pattern. Header files inside of "src" will now always include "common.h" as its first other file, separated by a newline from all the other includes to make it stand out as special. There are two cases for the implementation files. If they do have a matching header file, they will always include this one first, leading to "common.h" being transitively included as first file. If they do not have a matching header file, they instead include "common.h" as first file themselves. This fixes the outlined problems and will become our standard practice for header and source files inside of the "src/" from now on.

909d5494

2016-12-29T12:25:15

giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one

e0be1d60

2015-10-30T18:23:17

git: put NULL check at the top

45d295e0

2015-10-30T17:51:50

git: accept NULL as argument to its stream free

ac728c24

2015-08-03T07:38:07

Handle ssh:// and git:// urls containing a '~' character. For such a path '/~/...' the leading '/' is stripped so the server will get a path starting with '~' and correctly handle it.

c5e07187

2015-03-24T14:03:51

Merge pull request #2990 from leoyanggit/custom_param Add a custom param to git_smart_subtransport_definition

2a0f67f0

2015-03-21T21:48:03

git: make sure to close the network stream In case of a bad url or other error during the connection setup, we close the stream via free.

142e5379

2015-03-17T12:49:33

Add a custom param to git_smart_subtransport_definition The smart transport has already take the payload param. For the sub transport a payload param is useful for the implementer.

392702ee

2015-02-09T23:41:13

allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.

02b4c1e2

2014-11-01T16:58:20

Port the TCP transport to the new stream API

c180c065

2014-07-09T17:58:39

Custom transport: minor cleanups * Move the transport registration mechanisms into a new header under 'sys/' because this is advanced stuff. * Remove the 'priority' argument from the registration as it adds unnecessary complexity. (Since transports cannot decline to operate, only the highest priority transport is ever executed.) Users who require per-priority transports can implement that in their custom transport themselves. * Simplify registration further by taking a scheme (eg "http") instead of a prefix (eg "http://").

dab89f9b

2013-12-04T21:22:57

Further EUSER and error propagation fixes This continues auditing all the places where GIT_EUSER is being returned and making sure to clear any existing error using the new giterr_user_cancel helper. As a result, places that relied on intercepting GIT_EUSER but having the old error preserved also needed to be cleaned up to correctly stash and then retrieve the actual error. Additionally, as I encountered places where error codes were not being propagated correctly, I tried to fix them up. A number of those fixes are included in the this commit as well.

c227c173

2013-11-04T11:42:14

Use http_parser_parse_url to parse urls

29b77446

2013-10-30T15:38:52

Initialize variables

630146bd

2013-02-04T13:52:18

Address feedback

8c36a3cd

2013-01-31T15:24:59

Remove double-free segfaults

cf7038a6

2013-01-31T14:04:21

Enhance url parsing to include passwords

2234b2b0

2013-01-30T19:03:58

Stash username from url (but don't use it yet)

359fc2d2

2013-01-08T17:07:25

update copyrights

6762fe08

2012-11-29T08:29:26

Remove casts of return values of type void *

613d5eb9

2012-11-28T11:42:37

Push! By schu, phkelley, and congyiwu, et al

41fb1ca0

2012-10-29T13:41:14

Reorganize transport architecture (squashed 3)

e03e71da

2012-05-14T17:54:25

network: add sideband support This lets us notify the user of what the remote end is doing while we wait for it to start sending us the packfile.

5dca2010

2012-08-03T17:08:01

Update iterators for consistency across library This updates all the `foreach()` type functions across the library that take callbacks from the user to have a consistent behavior. The rules are: * A callback terminates the loop by returning any non-zero value * Once the callback returns non-zero, it will not be called again (i.e. the loop stops all iteration regardless of state) * If the callback returns non-zero, the parent fn returns GIT_EUSER * Although the parent returns GIT_EUSER, no error will be set in the library and `giterr_last()` will return NULL if called. This commit makes those changes across the library and adds tests for most of the iteration APIs to make sure that they follow the above rules.

ad4b5beb

2012-07-25T10:40:59

transport: store the refs in a common area Instad of each transport having its own function and logic to get to its refs, store them directly in transport. Leverage the new gitno_buffer to make the parsing and storing of the refs use common code and get rid of the git_protocol struct.

b49c8f71

2012-07-24T19:03:22

remote: use the same code to control git and http This allows us to add capabilitites to both at the same time, keeps them in sync and removes a lot of code. gitno_buffer now uses a callback to fill its buffer, allowing us to use the same interface for git and http (which uses callbacks).

114dc6e1

2012-07-24T17:10:57

network: implement multi_ack for the git transport

64d01de8

2012-07-24T14:23:16

remote: start moving the protocol to a common area For the transition, http is going to keep its own logic until the git/common code catches up with the implied multi_ack that http has. This also has the side-effect of making the code cleaner and more correct regardingt he protocol.

fdc5c38e

2012-06-05T23:03:06

transports: fix buglet

966fbdcb

2012-06-05T13:53:33

Merge pull request #697 from carlosmn/ssl Add HTTPS support

e9551e86

2012-06-02T16:52:22

Fix git_close/http_close/local_close to set the transport's connected attribute to 0.

66024c7c

2012-05-01T00:05:25

http: add https support when GnuTLS is available If it's not available, an error saying so will be returned when trying to use a https:// URL. This also unifies a lot of the network code to use git_transport in many places instead of an socket descriptor.

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

49ac5ac8

2012-05-06T13:17:25

transport git: don't use 'error' uninitialized

cd58c15c

2012-05-05T16:47:20

Merge remote-tracking branch 'scottjg/fix-mingw32' into development Conflicts: src/netops.c src/netops.h src/transports/http.c tests-clar/clar

b4b96d56

2012-05-05T13:30:33

Fix gitno_connect() error handling on Windows gitno_connect() can return an error or socket, which is fine on most platforms where sockets are file descriptors (signed int), but on Windows, SOCKET is an unsigned type, which is problematic when we are trying to test if the socket was actually a negative error code. This fix seperates the error code and socket in gitno_connect(), and fixes the error handling in do_connect() functions to compensate. It appears that git_connect() and the git-transport do_connect() functions had bugs in the non-windows cases too (leaking sockets, and not properly reporting connection error, respectively) so I went ahead and fixed those too.

3fbcac89

2012-05-02T19:56:38

Remove old and unused error codes

dee5515a

2012-04-14T18:34:50

transports: buffer the git requests before sending them Trying to send every single line immediately won't give us any speed improvement and duplicates the code we need for other transports. Make the git transport use the same buffer functions as HTTP.

7a520f5d

2012-04-13T23:19:38

fetch: use the streaming indexer when downloading a pack This changes the git_remote_download() API, but the existing one is silly, so you don't get to complain. The new API allows to know how much data has been downloaded, how many objects we expect in total and how many we've processed.

44ef8b1b

2012-04-13T13:00:10

Fix warnings on 64-bit windows builds This fixes all the warnings on win64 except those in deps, which come from the regex code.

2b386acd

2012-03-06T10:47:18

error-handling: git transport

cb8a7961

2012-03-07T00:02:55

error-handling: Repository This also includes droping `git_buf_lasterror` because it makes no sense in the new system. Note that in most of the places were it has been dropped, the code needs cleanup. I.e. GIT_ENOMEM is going away, so instead it should return a generic `-1` and obviously not throw anything.

5e0de328

2012-02-13T17:10:24

Update Copyright header Signed-off-by: schu <schu-github@schulog.org>

97769280

2011-11-30T11:27:15

Use git_buf for path storage instead of stack-based buffers This converts virtually all of the places that allocate GIT_PATH_MAX buffers on the stack for manipulating paths to use git_buf objects instead. The patch is pretty careful not to touch the public API for libgit2, so there are a few places that still use GIT_PATH_MAX. This extends and changes some details of the git_buf implementation to add a couple of extra functions and to make error handling easier. This includes serious alterations to all the path.c functions, and several of the fileops.c ones, too. Also, there are a number of new functions that parallel existing ones except that use a git_buf instead of a stack-based buffer (such as git_config_find_global_r that exists alongsize git_config_find_global). This also modifies the win32 version of p_realpath to allocate whatever buffer size is needed to accommodate the realpath instead of hardcoding a GIT_PATH_MAX limit, but that change needs to be tested still.

d88d4311

2011-11-28T08:40:40

remote: Cleanup the remotes code - Hide the remaining transports code - Drop `git_headarray`, switch to using a callback to list refs. Makes the code cleaner.

40a40e8e

2011-10-26T18:06:36

net: move the reference storage to common code

3286c408

2011-10-28T14:51:13

global: Properly use `git__` memory wrappers Ensure that all memory related functions (malloc, calloc, strdup, free, etc) are using their respective `git__` wrappers.

dfafb03b

2011-10-07T00:44:41

Move the transports to their own directory

thodg/libgit2/src/transports/git.c

src/transports/git.c

Log