kmx git

Commit	Date	Message
f1453c59	2015-02-12T12:19:37	Make our overflow check look more like gcc/clang's Make our overflow checking look more like gcc and clang's, so that we can substitute it out with the compiler instrinsics on platforms that support it. This means dropping the ability to pass `NULL` as an out parameter. As a result, the macros also get updated to reflect this as well.
392702ee	2015-02-09T23:41:13	allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.
f7fcb18f	2014-11-23T14:12:54	Plug leaks Valgrind is now clean except for libssl and libgcrypt.
62a617dc	2014-11-06T16:16:46	iterator: submodules are determined by an index or tree We cannot know from looking at .gitmodules whether a directory is a submodule or not. We need the index or tree we are comparing against to tell us. Otherwise we have to assume the entry in .gitmodules is stale or otherwise invalid. Thus we pass the index of the repository into the workdir iterator, even if we do not want to compare against it. This follows what git does, which even for `git diff <tree>`, it will consider staged submodules as such.
f554611a	2014-05-06T12:41:26	Improve checks for ignore containment The diff code was using an "ignored_prefix" directory to track if a parent directory was ignored that contained untracked files alongside tracked files. Unfortunately, when negative ignore rules were used for directories inside ignored parents, the wrong rules were applied to untracked files inside the negatively ignored child directories. This commit moves the logic for ignore containment into the workdir iterator (which is a better place for it), so the ignored-ness of a directory is contained in the frame stack during traversal. This allows a child directory to override with a negative ignore and yet still restore the ignored state of the parent when we traverse out of the child. Along with this, there are some problems with "directory only" ignore rules on container directories. Given "a/*" and "!a/b/c/" (where the second rule is a directory rule but the first rule is just a generic prefix rule), then the directory only constraint was having "a/b/c/d/file" match the first rule and not the second. This was fixed by having ignore directory-only rules test a rule against the prefix of a file with LEADINGDIR enabled. Lastly, spot checks for ignores using `git_ignore_path_is_ignored` were tested from the top directory down to the bottom to deal with the containment problem, but this is wrong. We have to test bottom to top so that negative subdirectory rules will be checked before parent ignore rules. This does change the behavior of some existing tests, but it seems only to bring us more in line with core Git, so I think those changes are acceptable.
9c8ed499	2014-04-29T15:05:58	Remove trace / add git_diff_perfdata struct + api
b23b112d	2014-04-29T11:29:49	Add payloads, bitmaps to trace API This is a proposed adjustment to the trace APIs. This makes the trace levels into a bitmask so that they can be selectively enabled and adds a callback-level payload, plus a message-level payload. This makes it easier for me to a GIT_TRACE_PERF callbacks that are simply bypassed if the PERF level is not set.
cd424ad5	2014-04-28T16:39:53	Add GIT_STATUS_OPT_UPDATE_INDEX and use trace API This adds an option to refresh the stat cache while generating status. It also rips out the GIT_PERF stuff I had an makes use of the trace API to keep statistics about what happens during diff.
8ef4e11a	2014-04-28T14:16:26	Skip diff oid calc when size definitely changed When we think the stat cache in the index seems valid and the size or mode of a file has definitely changed, then don't bother trying to recalculate the OID of the workdir bits to confirm that it is modified - just accept that it is modified. This can result in files that show as modified with no actual diff, but the behavior actually appears to match Git on the command line. This also includes a minor optimization to not perform a submodule lookup on the ".git" directory itself.
240f4af3	2014-04-28T14:04:29	Add build option for diff internal statistics
a409acef	2014-04-24T11:59:50	Handle explicitly ignored dir slightly differently When considering status of untracked directories, if we find an explicitly ignored item, even if it is a directory, treat the parent as an IGNORED item. It was accidentally being treated as an EMPTY item because we were not looking into the ignored subdir.
219c89d1	2014-04-23T16:28:45	Treat ignored, empty, and untracked dirs different In the iterator, distinguish between ignores and empty directories so that diff and status can ignore empty directories, but checkout and stash can treat them as untracked items.
37da3685	2014-04-22T21:51:54	Make checkout match diff for untracked/ignored dir When diff finds an untracked directory, it emulates Git behavior by looking inside the directory to see if there are any untracked items inside it. If there are only ignored items inside the dir, then diff considers it ignored, even if there is no direct ignore rule for it. Checkout was not copying this behavior - when it found an untracked directory, it just treated it as untracked. Unfortunately, when combined with GIT_CHECKOUT_REMOVE_UNTRACKED, this made is seem that checkout (and stash, which uses checkout) was removing ignored items when you had only asked it to remove untracked ones. This commit moves the logic for advancing past an untracked dir while scanning for non-ignored items into an iterator helper fn, and uses that for both diff and checkout.
52bb0476	2014-03-14T13:53:15	Clean up index snapshot function naming Clear up some of the various "find" functions and the snapshot API naming to be things I like more.
3b4c401a	2014-02-10T13:20:08	Decouple index iterator sort from index This makes the index iterator honor the GIT_ITERATOR_IGNORE_CASE and GIT_ITERATOR_DONT_IGNORE_CASE flags without modifying the index data itself. To take advantage of this, I had to export a number of the internal index entry comparison functions. I also wrote some new tests to exercise the capability.
54edbb98	2014-02-07T16:48:27	Add index snapshot and use it for iterator
3dbee456	2014-02-07T14:10:35	Some index internals refactoring Again, laying groundwork for some index iterator changes, this contains a bunch of code refactorings for index internals that should make it easier down the line to add locking around index modifications. Also this removes the redundant prefix_position function and fixes some potential memory leaks.
7dcd42a5	2014-03-31T13:31:01	Cleanups
c856f8c5	2014-03-31T12:27:05	Fix submodule sorting in workdir iterator With the changes to how git_path_dirload_with_stat handles things that look like submodules, submodules could end up sorted in the wrong order with the workdir iterator. This moves the submodule check earlier in the iterator processing of a new directory so that the submodule name updates will happen immediately and the sort order will be correct.
d3bc95fd	2014-03-25T12:37:05	Update behavior for untracked sub-repos When a directory containing a .git directory (or even just a plain gitlink) was found, libgit2 was going out of its way to treat it specially. This seemed like it was necessary because the diff code was not originally emulating Git's behavior for untracked directories correctly (i.e. scanning for ignored vs untracked items inside). Now that libgit2 diff mimics Git's untracked directory behavior, the special handling for contained Git repos is actually incorrect and this commit rips it out.
d541170c	2014-01-24T11:36:41	index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.
9cfce273	2013-12-12T12:11:38	Cleanups, renames, and leak fixes This renames git_vector_free_all to the better git_vector_free_deep and also contains a couple of memory leak fixes based on valgrind checks. The fixes are specifically: failure to free global dir path variables when not compiled with threading on and failure to free filters from the filter registry that had not be initialized fully.
fcd324c6	2013-12-06T15:04:31	Add git_vector_free_all There are a lot of places that we call git__free on each item in a vector and then call git_vector_free on the vector itself. This just wraps that up into one convenient helper function.
96869a4e	2013-12-03T16:45:39	Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.
1eab9f0e	2013-11-05T14:56:10	error: Simplify giterr_detach
3b259cbd	2013-11-04T15:47:35	Preserve file error in iterator When the filesystem iterator encounters an error with a file, it returns the error but because of the cleanup code, it was in some cases erasing the error message. This uses the giterr_detach API to make sure that the actual error message is restored after the cleanup code has been run.
14997dc5	2013-10-08T12:45:43	More filemode cleanups for FAT on MacOS This cleans up some additional issues. The main change is that on a filesystem that doesn't support mode bits, libgit2 will now create new blobs with GIT_FILEMODE_BLOB always instead of being at the mercy to the filesystem driver to report executable or not. This means that if "core.filemode" lies and claims that filemode is not supported, then we will ignore the executable bit from the filesystem. Previously we would have allowed it. This adds an option to the new git_repository_reset_filesystem to recurse through submodules if desired. There may be other types of APIs that would like a "recurse submodules" option, but this one is particularly useful. This also has a number of cleanups, etc., for related things including trying to give better error messages when problems come up from the filesystem. For example, the FAT filesystem driver on MacOS appears to return errno EINVAL if you attempt to write a filename with invalid UTF-8 in it. We try to capture that with a better error message now.
219d3457	2013-10-01T16:12:15	Initial iconv hookup for precomposed unicode This hooks up git_path_direach and git_path_dirload so that they will take a flag indicating if directory entry names should be tested and converted from decomposed unicode to precomposed form. This code will only come into play on the Apple platform and even then, only when certain types of filesystems are used. This involved adding a flag to these functions which involved changing a lot of places in the code. This was an opportunity to do a bit of code cleanup here and there, for example, getting rid of the git_futils_cleanupdir_r function in favor of a simple flag to git_futils_rmdir_r to not remove the top level entry. That ended up adding depth tracking during rmdir_r which led to a safety check for infinite directory recursion. Yay. This hasn't actually been tested on the Mac filesystems where the issue occurs. I still need to get test environment for that.
2fe54afa	2013-09-30T16:58:33	Put hooks in place for precompose in dirload fn This doesn't actual do string precompose but it puts the hooks in place into the iterators and the git_path_dirload function so that the actual precompose work is ready to go.
ba8b8c04	2013-08-07T09:17:20	Improve building ignore file lists The routines to push and pop ignore files while traversing a directory had some issues. In particular, setting up the initial list would sometimes push an ignore file before it ought to be applied if the starting path was a directory containing an ignore file. Also, the pop function was not always matching the right part of the path and would fail to pop ignores from the list in some cases. This adds some tests that exercise a particular problematic case and then fixes the problems that I could find related to this. At some point, I'd like to isolate this ignore rule management code and rewrite it, but that's a larger project and right now, I'll opt to just try to fix the broken behaviors.
9094ae5a	2013-06-21T11:51:16	Add target directory to checkout This adds the ability for checkout to write to a target directory instead of having to use the working directory of the repository. This makes it easier to do exports of repository data and the like. This is similar to, but not quite the same as, the --prefix option to `git checkout-index` (this will always be treated as a directory name, not just as a simple text prefix). As part of this, the workdir iterator was extended to take the path to the working directory as a parameter and fallback on the git_repository_workdir result only if it's not specified. Fixes #1332
114f5a6c	2013-06-10T10:10:39	Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.
cee695ae	2013-05-31T12:18:43	Make iterators use GIT_ITEROVER & smart advance 1. internal iterators now return GIT_ITEROVER when you go past the last item in the iteration. 2. git_iterator_advance will "advance" to the first item in the iteration if it is called immediately after creating the iterator, which allows a simpler idiom for basic iteration. 3. if git_iterator_advance encounters an error reading data (e.g. a missing tree or an unreadable file), it returns the error but also attempts to advance past the invalid data to prevent an infinite loop. Updated all tests and internal usage of iterators to account for these new behaviors.
1af80a67	2013-04-18T16:13:52	Fix workdir iterator leak When attempting to create a workdir iterator for a bare repo, don't leak the iterator structure.
fc57471a	2013-04-18T14:13:53	More filesystem iterator cleanup Renamed the callback functions and made some minor rearrangements to clean up the flow of some code.
71f85226	2013-04-18T11:11:38	Make workdir iterator use filesystem iterator This adds some hooks into the filesystem iterator so that the workdir iterator can just become a wrapper around it. Then we remove most of the workdir iterator code and just have it augment the filesystem iterator with skipping .git entries, updating the ignore stack, and checking for submodules.
ff0ddfa4	2013-04-17T15:56:31	Add filesystem iterator variant This adds a new variant iterator that is a raw filesystem iterator for scanning directories from a root. There is still more work to do to blend this with the working directory iterator.
575a54db	2013-04-10T16:55:29	object: Export git_object_dup
65025cb8	2013-03-18T17:24:13	Three submodule status bug fixes 1. Fix sort order problem with submodules where "mod" was sorting after "mod-plus" because they were being sorted as "mod/" and "mod-plus/". This involved pushing the "contains a .git entry" test significantly lower in the stack. 2. Reinstate behavior that a directory which contains a .git entry will be treated as a submodule during iteration even if it is not yet added to the .gitmodules. 3. Now that any directory containing .git is reported as submodule, we have to be more careful checking for GIT_EEXISTS when we do a submodule lookup, because that is the error code that is returned by git_submodule_lookup when you try to look up a directory containing .git that has no record in gitmodules or the index.
0c468633	2013-03-14T13:40:15	Improved tree iterator internals This updates the tree iterator internals to be more efficient. The tree_iterator_entry objects are now kept as pointers that are allocated from a git_pool, so that we may use git__tsort_r for sorting (which is better than qsort, given that the tree is likely mostly ordered already). Those tree_iterator_entry objects now keep direct pointers to the data they refer to instead of keeping indirect index values. This simplifies a lot of the data structure traversal code. This also adds bsearch to find the start item position for range- limited tree iterators, and is more explicit about using git_path_cmp instead of reimplementing it. The git_path_cmp changed a bit to make it easier for tree_iterators to use it (but it was barely being used previously, so not a big deal). This adds a git_pool_free_array function that efficiently frees a list of pool allocated pointers (which the tree_iterator keeps). Also, added new tests for the git_pool free list functionality that was not previously being tested (or used).
bbb13646	2013-03-13T14:59:51	Fix workdir iterator bugs This fixes two bugs with the workdir iterator depth check: first that the depth was not being decremented and second that empty directories were counting against the depth even though a frame was not being created for them. This also fixes a bug with the ENOTFOUND return code for workdir iterators when you attempt to advance_into an empty directory. Actually, that works correctly, but it was incorrectly being propogated into regular advance() calls in some circumstances. Added new tests for the above that create a huge hierarchy on the fly and try using the workdir iterator to traverse it.
a5eea2d7	2013-03-11T11:31:50	Stabilize order for equiv tree iterator entries Given a group of case-insensitively equivalent tree iterator entries, this ensures that the case-sensitively first trees will be used as the representative items. I.e. if you have conflicting entries "A/B/x", "a/b/x", and "A/b/x", this change ensures that the earliest entry "A/B/x" will be returned. The actual choice is not that important, but it is nice to have it stable and to have it been either the first or last item, as opposed to a random item from within the equivalent span.
aec4f663	2013-03-11T10:37:12	Fix tree iterator advance using wrong name compare Tree iterator advance was moving forward without taking the filemode of the entries into account, equating "a" and "a/". This makes the tree entry comparison code more easily reusable and fixes the problem.
92028ea5	2013-03-11T09:53:49	Fix tree iterator path for tree issue + cleanups This fixes an off by one error for generating full paths for tree entries in tree iterators when INCLUDE_TREES is set. Also, contains a bunch of small code cleanups with a couple of small utility functions and macro changes to eliminate redundant code.
61c7b61e	2013-03-10T22:38:53	Use correct case path in icase tree iterator If there are case-ambiguities in the path of a case insensitive tree iterator, it will now rewrite the entire path when it gives the path name to an entry, so a tree with "A/b/C/d.txt" and "a/B/c/E.txt" will give the true full paths (instead of case- folding them both to "A/B/C/d.txt" or "a/b/c/E.txt" or something like that.
e40f1c2d	2013-03-08T16:39:57	Make tree iterator handle icase equivalence There is a serious bug in the previous tree iterator implementation. If case insensitivity resulted in member elements being equivalent to one another, and those member elements were trees, then the children of the colliding elements would be processed in sequence instead of in a single flattened list. This meant that the tree iterator was not truly acting like a case-insensitive list. This completely reworks the tree iterator to manage lists with case insensitive equivalence classes and advance through the items in a unified manner in a single sorted frame. It is possible that at a future date we might want to update this to separate the case insensitive and case sensitive tree iterators so that the case sensitive one could be a minimal amount of code and the insensitive one would always know what it needed to do without checking flags. But there would be so much shared code between the two, that I'm not sure it that's a win. For now, this gets what we need. More tests are needed, though.
9bea03ce	2013-03-06T15:16:34	Add INCLUDE_TREES, DONT_AUTOEXPAND iterator flags This standardizes iterator behavior across all three iterators (index, tree, and working directory). Previously the working directory iterator behaved differently from the other two. Each iterator can now operate in one of three modes: 1. No tree results, auto expand trees means that only non- tree items will be returned and when a tree/directory is encountered, we will automatically descend into it. 2. Tree results, auto expand trees means that results will be given for every item found, including trees, but you only need to call normal git_iterator_advance to yield every item (i.e. trees returned with pre-order iteration). 3. Tree results, no auto expand means that calling the normal git_iterator_advance when looking at a tree will not descend into the tree, but will skip over it to the next entry in the parent. Previously, behavior 1 was the only option for index and tree iterators, and behavior 3 was the only option for workdir. The main public API implications of this are that the `git_iterator_advance_into()` call is now valid for all iterators, not just working directory iterators, and all the existing uses of working directory iterators explicitly use the GIT_ITERATOR_DONT_AUTOEXPAND (for now). Interestingly, the majority of the implementation was in the index iterator, since there are no tree entries there and now have to fake them. The tree and working directory iterators only required small modifications.
cc216a01	2013-03-05T16:29:04	Retire spoolandsort iterator Since the case sensitivity is moved into the respective iterators, this removes the spoolandsort iterator code.
169dc616	2013-03-05T16:10:05	Make iterator APIs consistent with standards The iterator APIs are not currently consistent with the parameter ordering of the rest of the codebase. This rearranges the order of parameters, simplifies the naming of a number of functions, and makes somewhat better use of macros internally to clean up the iterator code. This also expands the test coverage of iterator functionality, making sure that case sensitive range-limited iteration works correctly.
11d9f6b3	2013-01-27T14:17:07	Vector improvements and their fallout
cce548e3	2013-01-22T15:28:25	Fix case sensitivity bug with tree iterators With the new code to make tree iterators support ignore_case, there is a bug in setting the start entry for range bounded iterators where memcmp was being used instead of strncasecmp. This fixes that and expands the tree iterator test to cover the cases that were broken.
fffe429a	2013-01-10T11:11:42	Shortcut spool and sort for empty iterator
25423d03	2013-01-09T16:07:54	Support case insensitive tree iterators and status This makes tree iterators directly support case insensitivity by using a secondary index that can be sorted by icase. Also, this fixes the ambiguity check in the git_status_file API to also be case insensitive. Lastly, this adds new test cases for case insensitive range boundary checking for all types of iterators. With this change, it should be possible to deprecate the spool and sort iterator, but I haven't done that yet.
134d8c91	2013-01-08T15:53:13	Update iterator API with flags for ignore_case This changes the iterator API so that flags can be passed in to the constructor functions to control the ignore_case behavior. At this point, the flags are not supported on tree iterators (i.e. there is no functional change over the old API), but the API changes are all made to accomodate this. By the way, I went with a flags parameter because in the future I have a couple of other ideas for iterator flags that will make it easier to fix some diff/status/checkout bugs.
4b181037	2013-01-08T13:39:15	Minor iterator API cleanups In preparation for further iterator changes, this cleans up a few small things in the iterator API: * removed the git_iterator_for_repo_index_range API * made git_iterator_free not be inlined * minor param name and test function name tweaks
359fc2d2	2013-01-08T17:07:25	update copyrights
546d65a8	2013-01-02T17:01:34	Fix up spoolandsort iterator usage The spoolandsort iterator changes got sort-of cherry picked out of this branch and so I dropped the commit when rebasing; however, there were a few small changes that got dropped as well (since the version merged upstream wasn't quite the same as what I dropped).
5cf9875a	2012-12-18T15:19:24	Add index updating to checkout Make checkout update entries in the index for all files that are updated and/or removed, unless flag GIT_CHECKOUT_DONT_UPDATE_INDEX is given. To do this, iterators were extended to allow a little more introspection into the index being iterated over, etc.
f616a36b	2012-12-27T22:25:52	Make spoolandsort a pushable iterator behavior An earlier change to `git_diff_from_iterators` introduced a memory leak where the allocated spoolandsort iterator was not returned to the caller and thus not freed. One proposal changes all iterator APIs to use git_iterator** so we can reallocate the iterator at will, but that seems unexpected. This commit makes it so that an iterator can be changed in place. The callbacks are isolated in a separate structure and a pointer to that structure can be reassigned by the spoolandsort extension. This means that spoolandsort doesn't create a new iterator; it just allocates a new block of callbacks (along with space for its own extra data) and swaps that into the iterator. Additionally, since spoolandsort is only needed to switch the case sensitivity of an iterator, this simplifies the API to only take the ignore_case boolean and to be a no-op if the iterator already matches the requested case sensitivity.
91e7d263	2012-12-10T15:29:44	Fix iterator reset and add reset ranges The `git_iterator_reset` command has not been working in all cases particularly when there is a start and end range. This fixes it and adds tests for it, and also extends it with the ability to update the start/end range strings when an iterator is reset.
9950d27a	2012-12-06T13:26:58	Clean up iterator APIs This removes the need to explicitly pass the repo into iterators where the repo is implied by the other parameters. This moves the repo to be owned by the parent struct. Also, this has some iterator related updates to the internal diff API to lay the groundwork for checkout improvements.
b2414661	2012-11-28T22:43:55	status should ignore conflicts entries in the index
e2934db2	2012-11-29T02:05:46	Merge pull request #1090 from arrbee/ignore-invalid-by-default Ignore invalid entries by default
a8122b5d	2012-11-21T15:39:03	Fix warnings on Win64 build
16248ee2	2012-11-21T11:03:07	Fix up some missing consts in tree & index This fixes some missed places where we can apply const-ness to various public APIs. There are still some index and tree APIs that cannot take const pointers because we sort our `git_vectors` lazily and so we can't reliably bsearch the index and tree content without applying a `git_vector_sort()` first. This also fixes some missed places where size_t can be used and where const can be applied to a couple internal functions.
f45d51ff	2012-11-20T19:57:46	API updates for index.h
e120123e	2012-11-20T14:01:46	API review / update for tree.h
d46b0a04	2012-11-19T16:34:44	Improve iterator ignoring .git file The workdir iterator has always tried to ignore .git files, but it turns out there were some bugs. This makes it more robust at ignoring .git files. This also makes iterators always check ".git" case insensitively regardless of the properties of the system. This will make libgit2 skip ".GIT" and the like. This is different from core git, but on systems with case insensitive but case preserving file systems, allowing ".GIT" to be added is problematic.
bad68c0a	2012-11-13T14:02:59	Add iterator for git_index object The index iterator could previously only be created from a repo object, but this allows creating an iterator from a `git_index` object instead (while keeping, though renaming, the old function).
55cbd05b	2012-11-08T16:56:34	Some diff refactorings to help code reuse There are some diff functions that are useful in a rewritten checkout and this lays some groundwork for that. This contains three main things: 1. Share the function diff uses to calculate the OID for a file in the working directory (now named `git_diff__oid_for_file` 2. Add a `git_diff__paired_foreach` function to iterator over two diff lists concurrently. Convert status to use it. 3. Move all the string/prefix/index entry comparisons into function pointers inside the `git_diff_list` object so they can be switched between case sensitive and insensitive versions. This makes them easier to reuse in various functions without replicating logic. As part of this, move a couple of index functions out of diff.c and into index.c.
220d5a6c	2012-11-08T16:45:25	Make iterator ignore eval lazy This makes it so that the check if a file is ignored will be deferred until requested on the workdir iterator, instead of aggressively evaluating the ignore rules for each entry. This should improve performance because there will be no need to check ignore rules for files that are already in the index.
f45ec1a0	2012-10-29T20:04:21	index refactoring
0d64bef9	2012-10-05T15:56:57	Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.
dfbff793	2012-10-08T15:14:12	Fix a few diff bugs with directory content There are a few cases where diff should leave directories in the diff list if we want to match core git, such as when the directory contains a .git dir. That feature was lost when I introduced some of the new submodule handling. This restores that and then fixes a couple of related to diff output that are triggered by having diffs with directories in them. Also, this adds a new flag that can be passed to diff if you want diff output to actually include the file content of any untracked files.
ec40b7f9	2012-09-17T15:42:41	Support for core.ignorecase
ced8d142	2012-08-22T11:30:55	errors: deploy GIT_EBAREREPO usage
5f4a61ae	2012-08-09T19:43:25	Working implementation of git_submodule_status This is a big redesign of the git_submodule_status API and the implementation of the redesigned API. It also fixes a number of bugs that I found in other parts of the submodule API while writing the tests for the status part. This also fixes a couple of bugs in the iterators that had not been noticed before - one with iterating when there is a gitlink (i.e. separate-work-dir) and one where I was treating anything even vaguely submodule-like as a submodule, more aggressively than core git does.
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
6e5c4af0	2012-05-17T14:21:10	Fix workdir iterators on empty directories Creating a workdir iterator on a directory with absolutely no files was returning an error (GIT_ENOTFOUND) instead of an iterator for nothing. This fixes that and includes two new tests that cover that case.
9d0011fd	2012-05-16T19:23:47	tree: Naming conventions
41a82592	2012-05-15T14:17:39	Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.
7e000ab2	2012-05-08T15:03:59	Add support for diffing index with no HEAD When a repo is first created, there is no HEAD yet and attempting to diff files in the index was showing nothing because a tree iterator could not be constructed. This adds an "empty" iterator and falls back on that when the head cannot be looked up.
bfc9ca59	2012-03-28T16:45:36	Added submodule API and use in status When processing status for a newly checked out repo, it is possible that there will be submodules that have not yet been initialized. The only way to distinguish these from untracked directories is to have some knowledge of submodules. This commit adds a new submodule API which, given a name or path, can determine if it appears to be a submodule and can give information about the submodule.
875bfc5f	2012-03-25T21:26:48	Fix error in tree iterator when popping up trees There was an error in the tree iterator where it would delete two tree levels instead of just one when popping up a tree level. Unfortunately the test data for the tree iterator did not have any deep trees with subtrees in the middle of the tree items, so this problem went unnoticed. This contains the 1-line fix plus new test data and tests that reveal the issue.
66142ae0	2012-03-22T10:44:36	New status fixes This adds support for roughly-right tracking of submodules (although it does not recurse into submodules to detect internal modifications a la core git), and it adds support for including unmodified files in diff iteration if requested.
7c7ff7d1	2012-03-19T16:10:11	Migrate index, oid, and utils to new errors This includes a few cleanups that came up while converting these files. This commit introduces a could new git error classes, including the catchall class: GITERR_INVALID which I'm using as the class for invalid and out of range values which are detected at too low a level of library to use a higher level classification. For example, an overflow error in parsing an integer or a bad letter in parsing an OID string would generate an error in this class.
0d0fa7c3	2012-03-16T15:56:01	Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.
deafee7b	2012-03-14T17:36:15	Continue error conversion This converts blob.c, fileops.c, and all of the win32 files. Also, various minor cleanups throughout the code. Plus, in testing the win32 build, I cleaned up a bunch (although not all) of the warnings with the 64-bit build.
9d160ba8	2012-03-06T01:37:56	diff: Fix rebase breackage
74fa4bfa	2012-02-28T16:14:47	Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.
01269540	2012-02-23T16:51:07	Fix -Wuninitialized warning Signed-off-by: schu <schu-github@schulog.org>
0534641d	2012-02-22T15:15:35	Fix iterators based on pull request feedback This update addresses all of the feedback in pull request #570. The biggest change was to create actual linked list stacks for storing the tree and workdir iterator state. This cleaned up the code a ton. Additionally, all of the static functions had their 'git_' prefix removed, and a lot of other unnecessary changes were removed from the original patch.
da337c80	2012-02-22T11:22:33	Iterator improvements from diff implementation This makes two changes to iterator behavior: first, advance can optionally do the work of returning the new current value. This is such a common pattern that it really cleans up usage. Second, for workdir iterators, this removes automatically iterating into directories. That seemed like a good idea, but when an entirely new directory hierarchy is introduced into the workdir, there is no reason to iterate into it if there are no corresponding entries in the tree/index that it is being compared to. This second change actually wasn't a lot of code because not descending into directories was already the behavior for ignored directories. This just extends that to all directories.
b6c93aef	2012-02-21T14:46:24	Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.

f1453c59

2015-02-12T12:19:37

Make our overflow check look more like gcc/clang's Make our overflow checking look more like gcc and clang's, so that we can substitute it out with the compiler instrinsics on platforms that support it. This means dropping the ability to pass `NULL` as an out parameter. As a result, the macros also get updated to reflect this as well.

392702ee

2015-02-09T23:41:13

allocations: test for overflow of requested size Introduce some helper macros to test integer overflow from arithmetic and set error message appropriately.

f7fcb18f

2014-11-23T14:12:54

Plug leaks Valgrind is now clean except for libssl and libgcrypt.

62a617dc

2014-11-06T16:16:46

iterator: submodules are determined by an index or tree We cannot know from looking at .gitmodules whether a directory is a submodule or not. We need the index or tree we are comparing against to tell us. Otherwise we have to assume the entry in .gitmodules is stale or otherwise invalid. Thus we pass the index of the repository into the workdir iterator, even if we do not want to compare against it. This follows what git does, which even for `git diff <tree>`, it will consider staged submodules as such.

f554611a

2014-05-06T12:41:26

Improve checks for ignore containment The diff code was using an "ignored_prefix" directory to track if a parent directory was ignored that contained untracked files alongside tracked files. Unfortunately, when negative ignore rules were used for directories inside ignored parents, the wrong rules were applied to untracked files inside the negatively ignored child directories. This commit moves the logic for ignore containment into the workdir iterator (which is a better place for it), so the ignored-ness of a directory is contained in the frame stack during traversal. This allows a child directory to override with a negative ignore and yet still restore the ignored state of the parent when we traverse out of the child. Along with this, there are some problems with "directory only" ignore rules on container directories. Given "a/*" and "!a/b/c/" (where the second rule is a directory rule but the first rule is just a generic prefix rule), then the directory only constraint was having "a/b/c/d/file" match the first rule and not the second. This was fixed by having ignore directory-only rules test a rule against the prefix of a file with LEADINGDIR enabled. Lastly, spot checks for ignores using `git_ignore_path_is_ignored` were tested from the top directory down to the bottom to deal with the containment problem, but this is wrong. We have to test bottom to top so that negative subdirectory rules will be checked before parent ignore rules. This does change the behavior of some existing tests, but it seems only to bring us more in line with core Git, so I think those changes are acceptable.

9c8ed499

2014-04-29T15:05:58

Remove trace / add git_diff_perfdata struct + api

b23b112d

2014-04-29T11:29:49

Add payloads, bitmaps to trace API This is a proposed adjustment to the trace APIs. This makes the trace levels into a bitmask so that they can be selectively enabled and adds a callback-level payload, plus a message-level payload. This makes it easier for me to a GIT_TRACE_PERF callbacks that are simply bypassed if the PERF level is not set.

cd424ad5

2014-04-28T16:39:53

Add GIT_STATUS_OPT_UPDATE_INDEX and use trace API This adds an option to refresh the stat cache while generating status. It also rips out the GIT_PERF stuff I had an makes use of the trace API to keep statistics about what happens during diff.

8ef4e11a

2014-04-28T14:16:26

Skip diff oid calc when size definitely changed When we think the stat cache in the index seems valid and the size or mode of a file has definitely changed, then don't bother trying to recalculate the OID of the workdir bits to confirm that it is modified - just accept that it is modified. This can result in files that show as modified with no actual diff, but the behavior actually appears to match Git on the command line. This also includes a minor optimization to not perform a submodule lookup on the ".git" directory itself.

240f4af3

2014-04-28T14:04:29

Add build option for diff internal statistics

a409acef

2014-04-24T11:59:50

Handle explicitly ignored dir slightly differently When considering status of untracked directories, if we find an explicitly ignored item, even if it is a directory, treat the parent as an IGNORED item. It was accidentally being treated as an EMPTY item because we were not looking into the ignored subdir.

219c89d1

2014-04-23T16:28:45

Treat ignored, empty, and untracked dirs different In the iterator, distinguish between ignores and empty directories so that diff and status can ignore empty directories, but checkout and stash can treat them as untracked items.

37da3685

2014-04-22T21:51:54

Make checkout match diff for untracked/ignored dir When diff finds an untracked directory, it emulates Git behavior by looking inside the directory to see if there are any untracked items inside it. If there are only ignored items inside the dir, then diff considers it ignored, even if there is no direct ignore rule for it. Checkout was not copying this behavior - when it found an untracked directory, it just treated it as untracked. Unfortunately, when combined with GIT_CHECKOUT_REMOVE_UNTRACKED, this made is seem that checkout (and stash, which uses checkout) was removing ignored items when you had only asked it to remove untracked ones. This commit moves the logic for advancing past an untracked dir while scanning for non-ignored items into an iterator helper fn, and uses that for both diff and checkout.

52bb0476

2014-03-14T13:53:15

Clean up index snapshot function naming Clear up some of the various "find" functions and the snapshot API naming to be things I like more.

3b4c401a

2014-02-10T13:20:08

Decouple index iterator sort from index This makes the index iterator honor the GIT_ITERATOR_IGNORE_CASE and GIT_ITERATOR_DONT_IGNORE_CASE flags without modifying the index data itself. To take advantage of this, I had to export a number of the internal index entry comparison functions. I also wrote some new tests to exercise the capability.

54edbb98

2014-02-07T16:48:27

Add index snapshot and use it for iterator

3dbee456

2014-02-07T14:10:35

Some index internals refactoring Again, laying groundwork for some index iterator changes, this contains a bunch of code refactorings for index internals that should make it easier down the line to add locking around index modifications. Also this removes the redundant prefix_position function and fixes some potential memory leaks.

7dcd42a5

2014-03-31T13:31:01

Cleanups

c856f8c5

2014-03-31T12:27:05

Fix submodule sorting in workdir iterator With the changes to how git_path_dirload_with_stat handles things that look like submodules, submodules could end up sorted in the wrong order with the workdir iterator. This moves the submodule check earlier in the iterator processing of a new directory so that the submodule name updates will happen immediately and the sort order will be correct.

d3bc95fd

2014-03-25T12:37:05

Update behavior for untracked sub-repos When a directory containing a .git directory (or even just a plain gitlink) was found, libgit2 was going out of its way to treat it specially. This seemed like it was necessary because the diff code was not originally emulating Git's behavior for untracked directories correctly (i.e. scanning for ignored vs untracked items inside). Now that libgit2 diff mimics Git's untracked directory behavior, the special handling for contained Git repos is actually incorrect and this commit rips it out.

d541170c

2014-01-24T11:36:41

index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.

9cfce273

2013-12-12T12:11:38

Cleanups, renames, and leak fixes This renames git_vector_free_all to the better git_vector_free_deep and also contains a couple of memory leak fixes based on valgrind checks. The fixes are specifically: failure to free global dir path variables when not compiled with threading on and failure to free filters from the filter registry that had not be initialized fully.

fcd324c6

2013-12-06T15:04:31

Add git_vector_free_all There are a lot of places that we call git__free on each item in a vector and then call git_vector_free on the vector itself. This just wraps that up into one convenient helper function.

96869a4e

2013-12-03T16:45:39

Improve GIT_EUSER handling This adds giterr_user_cancel to return GIT_EUSER and clear any error message that is sitting around. As a result of using that in places, we need to be more thorough with capturing errors that happen inside a callback when used internally. To help with that, this also adds giterr_capture and giterr_restore so that when we internally use a foreach-type function that clears errors and converts them to GIT_EUSER, it is easier to restore not just the return value, but the actual error message text.

1eab9f0e

2013-11-05T14:56:10

error: Simplify giterr_detach

3b259cbd

2013-11-04T15:47:35

Preserve file error in iterator When the filesystem iterator encounters an error with a file, it returns the error but because of the cleanup code, it was in some cases erasing the error message. This uses the giterr_detach API to make sure that the actual error message is restored after the cleanup code has been run.

14997dc5

2013-10-08T12:45:43

More filemode cleanups for FAT on MacOS This cleans up some additional issues. The main change is that on a filesystem that doesn't support mode bits, libgit2 will now create new blobs with GIT_FILEMODE_BLOB always instead of being at the mercy to the filesystem driver to report executable or not. This means that if "core.filemode" lies and claims that filemode is not supported, then we will ignore the executable bit from the filesystem. Previously we would have allowed it. This adds an option to the new git_repository_reset_filesystem to recurse through submodules if desired. There may be other types of APIs that would like a "recurse submodules" option, but this one is particularly useful. This also has a number of cleanups, etc., for related things including trying to give better error messages when problems come up from the filesystem. For example, the FAT filesystem driver on MacOS appears to return errno EINVAL if you attempt to write a filename with invalid UTF-8 in it. We try to capture that with a better error message now.

219d3457

2013-10-01T16:12:15

Initial iconv hookup for precomposed unicode This hooks up git_path_direach and git_path_dirload so that they will take a flag indicating if directory entry names should be tested and converted from decomposed unicode to precomposed form. This code will only come into play on the Apple platform and even then, only when certain types of filesystems are used. This involved adding a flag to these functions which involved changing a lot of places in the code. This was an opportunity to do a bit of code cleanup here and there, for example, getting rid of the git_futils_cleanupdir_r function in favor of a simple flag to git_futils_rmdir_r to not remove the top level entry. That ended up adding depth tracking during rmdir_r which led to a safety check for infinite directory recursion. Yay. This hasn't actually been tested on the Mac filesystems where the issue occurs. I still need to get test environment for that.

2fe54afa

2013-09-30T16:58:33

Put hooks in place for precompose in dirload fn This doesn't actual do string precompose but it puts the hooks in place into the iterators and the git_path_dirload function so that the actual precompose work is ready to go.

ba8b8c04

2013-08-07T09:17:20

Improve building ignore file lists The routines to push and pop ignore files while traversing a directory had some issues. In particular, setting up the initial list would sometimes push an ignore file before it ought to be applied if the starting path was a directory containing an ignore file. Also, the pop function was not always matching the right part of the path and would fail to pop ignores from the list in some cases. This adds some tests that exercise a particular problematic case and then fixes the problems that I could find related to this. At some point, I'd like to isolate this ignore rule management code and rewrite it, but that's a larger project and right now, I'll opt to just try to fix the broken behaviors.

9094ae5a

2013-06-21T11:51:16

Add target directory to checkout This adds the ability for checkout to write to a target directory instead of having to use the working directory of the repository. This makes it easier to do exports of repository data and the like. This is similar to, but not quite the same as, the --prefix option to `git checkout-index` (this will always be treated as a directory name, not just as a simple text prefix). As part of this, the workdir iterator was extended to take the path to the working directory as a parameter and fallback on the git_repository_workdir result only if it's not specified. Fixes #1332

114f5a6c

2013-06-10T10:10:39

Reorganize diff and add basic diff driver This is a significant reorganization of the diff code to break it into a set of more clearly distinct files and to document the new organization. Hopefully this will make the diff code easier to understand and to extend. This adds a new `git_diff_driver` object that looks of diff driver information from the attributes and the config so that things like function content in diff headers can be provided. The full driver spec is not implemented in the commit - this is focused on the reorganization of the code and putting the driver hooks in place. This also removes a few #includes from src/repository.h that were overbroad, but as a result required extra #includes in a variety of places since including src/repository.h no longer results in pulling in the whole world.

cee695ae

2013-05-31T12:18:43

Make iterators use GIT_ITEROVER & smart advance 1. internal iterators now return GIT_ITEROVER when you go past the last item in the iteration. 2. git_iterator_advance will "advance" to the first item in the iteration if it is called immediately after creating the iterator, which allows a simpler idiom for basic iteration. 3. if git_iterator_advance encounters an error reading data (e.g. a missing tree or an unreadable file), it returns the error but also attempts to advance past the invalid data to prevent an infinite loop. Updated all tests and internal usage of iterators to account for these new behaviors.

1af80a67

2013-04-18T16:13:52

Fix workdir iterator leak When attempting to create a workdir iterator for a bare repo, don't leak the iterator structure.

fc57471a

2013-04-18T14:13:53

More filesystem iterator cleanup Renamed the callback functions and made some minor rearrangements to clean up the flow of some code.

71f85226

2013-04-18T11:11:38

Make workdir iterator use filesystem iterator This adds some hooks into the filesystem iterator so that the workdir iterator can just become a wrapper around it. Then we remove most of the workdir iterator code and just have it augment the filesystem iterator with skipping .git entries, updating the ignore stack, and checking for submodules.

ff0ddfa4

2013-04-17T15:56:31

Add filesystem iterator variant This adds a new variant iterator that is a raw filesystem iterator for scanning directories from a root. There is still more work to do to blend this with the working directory iterator.

575a54db

2013-04-10T16:55:29

object: Export git_object_dup

65025cb8

2013-03-18T17:24:13

Three submodule status bug fixes 1. Fix sort order problem with submodules where "mod" was sorting after "mod-plus" because they were being sorted as "mod/" and "mod-plus/". This involved pushing the "contains a .git entry" test significantly lower in the stack. 2. Reinstate behavior that a directory which contains a .git entry will be treated as a submodule during iteration even if it is not yet added to the .gitmodules. 3. Now that any directory containing .git is reported as submodule, we have to be more careful checking for GIT_EEXISTS when we do a submodule lookup, because that is the error code that is returned by git_submodule_lookup when you try to look up a directory containing .git that has no record in gitmodules or the index.

0c468633

2013-03-14T13:40:15

Improved tree iterator internals This updates the tree iterator internals to be more efficient. The tree_iterator_entry objects are now kept as pointers that are allocated from a git_pool, so that we may use git__tsort_r for sorting (which is better than qsort, given that the tree is likely mostly ordered already). Those tree_iterator_entry objects now keep direct pointers to the data they refer to instead of keeping indirect index values. This simplifies a lot of the data structure traversal code. This also adds bsearch to find the start item position for range- limited tree iterators, and is more explicit about using git_path_cmp instead of reimplementing it. The git_path_cmp changed a bit to make it easier for tree_iterators to use it (but it was barely being used previously, so not a big deal). This adds a git_pool_free_array function that efficiently frees a list of pool allocated pointers (which the tree_iterator keeps). Also, added new tests for the git_pool free list functionality that was not previously being tested (or used).

bbb13646

2013-03-13T14:59:51

Fix workdir iterator bugs This fixes two bugs with the workdir iterator depth check: first that the depth was not being decremented and second that empty directories were counting against the depth even though a frame was not being created for them. This also fixes a bug with the ENOTFOUND return code for workdir iterators when you attempt to advance_into an empty directory. Actually, that works correctly, but it was incorrectly being propogated into regular advance() calls in some circumstances. Added new tests for the above that create a huge hierarchy on the fly and try using the workdir iterator to traverse it.

a5eea2d7

2013-03-11T11:31:50

Stabilize order for equiv tree iterator entries Given a group of case-insensitively equivalent tree iterator entries, this ensures that the case-sensitively first trees will be used as the representative items. I.e. if you have conflicting entries "A/B/x", "a/b/x", and "A/b/x", this change ensures that the earliest entry "A/B/x" will be returned. The actual choice is not that important, but it is nice to have it stable and to have it been either the first or last item, as opposed to a random item from within the equivalent span.

aec4f663

2013-03-11T10:37:12

Fix tree iterator advance using wrong name compare Tree iterator advance was moving forward without taking the filemode of the entries into account, equating "a" and "a/". This makes the tree entry comparison code more easily reusable and fixes the problem.

92028ea5

2013-03-11T09:53:49

Fix tree iterator path for tree issue + cleanups This fixes an off by one error for generating full paths for tree entries in tree iterators when INCLUDE_TREES is set. Also, contains a bunch of small code cleanups with a couple of small utility functions and macro changes to eliminate redundant code.

61c7b61e

2013-03-10T22:38:53

Use correct case path in icase tree iterator If there are case-ambiguities in the path of a case insensitive tree iterator, it will now rewrite the entire path when it gives the path name to an entry, so a tree with "A/b/C/d.txt" and "a/B/c/E.txt" will give the true full paths (instead of case- folding them both to "A/B/C/d.txt" or "a/b/c/E.txt" or something like that.

e40f1c2d

2013-03-08T16:39:57

Make tree iterator handle icase equivalence There is a serious bug in the previous tree iterator implementation. If case insensitivity resulted in member elements being equivalent to one another, and those member elements were trees, then the children of the colliding elements would be processed in sequence instead of in a single flattened list. This meant that the tree iterator was not truly acting like a case-insensitive list. This completely reworks the tree iterator to manage lists with case insensitive equivalence classes and advance through the items in a unified manner in a single sorted frame. It is possible that at a future date we might want to update this to separate the case insensitive and case sensitive tree iterators so that the case sensitive one could be a minimal amount of code and the insensitive one would always know what it needed to do without checking flags. But there would be so much shared code between the two, that I'm not sure it that's a win. For now, this gets what we need. More tests are needed, though.

9bea03ce

2013-03-06T15:16:34

Add INCLUDE_TREES, DONT_AUTOEXPAND iterator flags This standardizes iterator behavior across all three iterators (index, tree, and working directory). Previously the working directory iterator behaved differently from the other two. Each iterator can now operate in one of three modes: 1. *No tree results, auto expand trees* means that only non- tree items will be returned and when a tree/directory is encountered, we will automatically descend into it. 2. *Tree results, auto expand trees* means that results will be given for every item found, including trees, but you only need to call normal git_iterator_advance to yield every item (i.e. trees returned with pre-order iteration). 3. *Tree results, no auto expand* means that calling the normal git_iterator_advance when looking at a tree will not descend into the tree, but will skip over it to the next entry in the parent. Previously, behavior 1 was the only option for index and tree iterators, and behavior 3 was the only option for workdir. The main public API implications of this are that the `git_iterator_advance_into()` call is now valid for all iterators, not just working directory iterators, and all the existing uses of working directory iterators explicitly use the GIT_ITERATOR_DONT_AUTOEXPAND (for now). Interestingly, the majority of the implementation was in the index iterator, since there are no tree entries there and now have to fake them. The tree and working directory iterators only required small modifications.

cc216a01

2013-03-05T16:29:04

Retire spoolandsort iterator Since the case sensitivity is moved into the respective iterators, this removes the spoolandsort iterator code.

169dc616

2013-03-05T16:10:05

Make iterator APIs consistent with standards The iterator APIs are not currently consistent with the parameter ordering of the rest of the codebase. This rearranges the order of parameters, simplifies the naming of a number of functions, and makes somewhat better use of macros internally to clean up the iterator code. This also expands the test coverage of iterator functionality, making sure that case sensitive range-limited iteration works correctly.

11d9f6b3

2013-01-27T14:17:07

Vector improvements and their fallout

cce548e3

2013-01-22T15:28:25

Fix case sensitivity bug with tree iterators With the new code to make tree iterators support ignore_case, there is a bug in setting the start entry for range bounded iterators where memcmp was being used instead of strncasecmp. This fixes that and expands the tree iterator test to cover the cases that were broken.

fffe429a

2013-01-10T11:11:42

Shortcut spool and sort for empty iterator

25423d03

2013-01-09T16:07:54

Support case insensitive tree iterators and status This makes tree iterators directly support case insensitivity by using a secondary index that can be sorted by icase. Also, this fixes the ambiguity check in the git_status_file API to also be case insensitive. Lastly, this adds new test cases for case insensitive range boundary checking for all types of iterators. With this change, it should be possible to deprecate the spool and sort iterator, but I haven't done that yet.

134d8c91

2013-01-08T15:53:13

Update iterator API with flags for ignore_case This changes the iterator API so that flags can be passed in to the constructor functions to control the ignore_case behavior. At this point, the flags are not supported on tree iterators (i.e. there is no functional change over the old API), but the API changes are all made to accomodate this. By the way, I went with a flags parameter because in the future I have a couple of other ideas for iterator flags that will make it easier to fix some diff/status/checkout bugs.

4b181037

2013-01-08T13:39:15

Minor iterator API cleanups In preparation for further iterator changes, this cleans up a few small things in the iterator API: * removed the git_iterator_for_repo_index_range API * made git_iterator_free not be inlined * minor param name and test function name tweaks

359fc2d2

2013-01-08T17:07:25

update copyrights

546d65a8

2013-01-02T17:01:34

Fix up spoolandsort iterator usage The spoolandsort iterator changes got sort-of cherry picked out of this branch and so I dropped the commit when rebasing; however, there were a few small changes that got dropped as well (since the version merged upstream wasn't quite the same as what I dropped).

5cf9875a

2012-12-18T15:19:24

Add index updating to checkout Make checkout update entries in the index for all files that are updated and/or removed, unless flag GIT_CHECKOUT_DONT_UPDATE_INDEX is given. To do this, iterators were extended to allow a little more introspection into the index being iterated over, etc.

f616a36b

2012-12-27T22:25:52

Make spoolandsort a pushable iterator behavior An earlier change to `git_diff_from_iterators` introduced a memory leak where the allocated spoolandsort iterator was not returned to the caller and thus not freed. One proposal changes all iterator APIs to use git_iterator** so we can reallocate the iterator at will, but that seems unexpected. This commit makes it so that an iterator can be changed in place. The callbacks are isolated in a separate structure and a pointer to that structure can be reassigned by the spoolandsort extension. This means that spoolandsort doesn't create a new iterator; it just allocates a new block of callbacks (along with space for its own extra data) and swaps that into the iterator. Additionally, since spoolandsort is only needed to switch the case sensitivity of an iterator, this simplifies the API to only take the ignore_case boolean and to be a no-op if the iterator already matches the requested case sensitivity.

91e7d263

2012-12-10T15:29:44

Fix iterator reset and add reset ranges The `git_iterator_reset` command has not been working in all cases particularly when there is a start and end range. This fixes it and adds tests for it, and also extends it with the ability to update the start/end range strings when an iterator is reset.

9950d27a

2012-12-06T13:26:58

Clean up iterator APIs This removes the need to explicitly pass the repo into iterators where the repo is implied by the other parameters. This moves the repo to be owned by the parent struct. Also, this has some iterator related updates to the internal diff API to lay the groundwork for checkout improvements.

b2414661

2012-11-28T22:43:55

status should ignore conflicts entries in the index

e2934db2

2012-11-29T02:05:46

Merge pull request #1090 from arrbee/ignore-invalid-by-default Ignore invalid entries by default

a8122b5d

2012-11-21T15:39:03

Fix warnings on Win64 build

16248ee2

2012-11-21T11:03:07

Fix up some missing consts in tree & index This fixes some missed places where we can apply const-ness to various public APIs. There are still some index and tree APIs that cannot take const pointers because we sort our `git_vectors` lazily and so we can't reliably bsearch the index and tree content without applying a `git_vector_sort()` first. This also fixes some missed places where size_t can be used and where const can be applied to a couple internal functions.

f45d51ff

2012-11-20T19:57:46

API updates for index.h

e120123e

2012-11-20T14:01:46

API review / update for tree.h

d46b0a04

2012-11-19T16:34:44

Improve iterator ignoring .git file The workdir iterator has always tried to ignore .git files, but it turns out there were some bugs. This makes it more robust at ignoring .git files. This also makes iterators always check ".git" case insensitively regardless of the properties of the system. This will make libgit2 skip ".GIT" and the like. This is different from core git, but on systems with case insensitive but case preserving file systems, allowing ".GIT" to be added is problematic.

bad68c0a

2012-11-13T14:02:59

Add iterator for git_index object The index iterator could previously only be created from a repo object, but this allows creating an iterator from a `git_index` object instead (while keeping, though renaming, the old function).

55cbd05b

2012-11-08T16:56:34

Some diff refactorings to help code reuse There are some diff functions that are useful in a rewritten checkout and this lays some groundwork for that. This contains three main things: 1. Share the function diff uses to calculate the OID for a file in the working directory (now named `git_diff__oid_for_file` 2. Add a `git_diff__paired_foreach` function to iterator over two diff lists concurrently. Convert status to use it. 3. Move all the string/prefix/index entry comparisons into function pointers inside the `git_diff_list` object so they can be switched between case sensitive and insensitive versions. This makes them easier to reuse in various functions without replicating logic. As part of this, move a couple of index functions out of diff.c and into index.c.

220d5a6c

2012-11-08T16:45:25

Make iterator ignore eval lazy This makes it so that the check if a file is ignored will be deferred until requested on the workdir iterator, instead of aggressively evaluating the ignore rules for each entry. This should improve performance because there will be no need to check ignore rules for files that are already in the index.

f45ec1a0

2012-10-29T20:04:21

index refactoring

0d64bef9

2012-10-05T15:56:57

Add complex checkout test and then fix checkout This started as a complex new test for checkout going through the "typechanges" test repository, but that revealed numerous issues with checkout, including: * complete failure with submodules * failure to create blobs with exec bits * problems when replacing a tree with a blob because the tree "example/" sorts after the blob "example" so the delete was being processed after the single file blob was created This fixes most of those problems and includes a number of other minor changes that made it easier to do that, including improving the TYPECHANGE support in diff/status, etc.

dfbff793

2012-10-08T15:14:12

Fix a few diff bugs with directory content There are a few cases where diff should leave directories in the diff list if we want to match core git, such as when the directory contains a .git dir. That feature was lost when I introduced some of the new submodule handling. This restores that and then fixes a couple of related to diff output that are triggered by having diffs with directories in them. Also, this adds a new flag that can be passed to diff if you want diff output to actually include the file content of any untracked files.

ec40b7f9

2012-09-17T15:42:41

Support for core.ignorecase

ced8d142

2012-08-22T11:30:55

errors: deploy GIT_EBAREREPO usage

5f4a61ae

2012-08-09T19:43:25

Working implementation of git_submodule_status This is a big redesign of the git_submodule_status API and the implementation of the redesigned API. It also fixes a number of bugs that I found in other parts of the submodule API while writing the tests for the status part. This also fixes a couple of bugs in the iterators that had not been noticed before - one with iterating when there is a gitlink (i.e. separate-work-dir) and one where I was treating anything even vaguely submodule-like as a submodule, more aggressively than core git does.

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

6e5c4af0

2012-05-17T14:21:10

Fix workdir iterators on empty directories Creating a workdir iterator on a directory with absolutely no files was returning an error (GIT_ENOTFOUND) instead of an iterator for nothing. This fixes that and includes two new tests that cover that case.

9d0011fd

2012-05-16T19:23:47

tree: Naming conventions

41a82592

2012-05-15T14:17:39

Ranged iterators and rewritten git_status_file The goal of this work is to rewrite git_status_file to use the same underlying code as git_status_foreach. This is done in 3 phases: 1. Extend iterators to allow ranged iteration with start and end prefixes for the range of file names to be covered. 2. Improve diff so that when there is a pathspec and there is a common non-wildcard prefix of the pathspec, it will use ranged iterators to minimize excess iteration. 3. Rewrite git_status_file to call git_status_foreach_ext with a pathspec that covers just the one file being checked. Since ranged iterators underlie the status & diff implementation, this is actually fairly efficient. The workdir iterator does end up loading the contents of all the directories down to the single file, which should ideally be avoided, but it is pretty good.

7e000ab2

2012-05-08T15:03:59

Add support for diffing index with no HEAD When a repo is first created, there is no HEAD yet and attempting to diff files in the index was showing nothing because a tree iterator could not be constructed. This adds an "empty" iterator and falls back on that when the head cannot be looked up.

bfc9ca59

2012-03-28T16:45:36

Added submodule API and use in status When processing status for a newly checked out repo, it is possible that there will be submodules that have not yet been initialized. The only way to distinguish these from untracked directories is to have some knowledge of submodules. This commit adds a new submodule API which, given a name or path, can determine if it appears to be a submodule and can give information about the submodule.

875bfc5f

2012-03-25T21:26:48

Fix error in tree iterator when popping up trees There was an error in the tree iterator where it would delete two tree levels instead of just one when popping up a tree level. Unfortunately the test data for the tree iterator did not have any deep trees with subtrees in the middle of the tree items, so this problem went unnoticed. This contains the 1-line fix plus new test data and tests that reveal the issue.

66142ae0

2012-03-22T10:44:36

New status fixes This adds support for roughly-right tracking of submodules (although it does not recurse into submodules to detect internal modifications a la core git), and it adds support for including unmodified files in diff iteration if requested.

7c7ff7d1

2012-03-19T16:10:11

Migrate index, oid, and utils to new errors This includes a few cleanups that came up while converting these files. This commit introduces a could new git error classes, including the catchall class: GITERR_INVALID which I'm using as the class for invalid and out of range values which are detected at too low a level of library to use a higher level classification. For example, an overflow error in parsing an integer or a bad letter in parsing an OID string would generate an error in this class.

0d0fa7c3

2012-03-16T15:56:01

Convert attr, ignore, mwindow, status to new errors Also cleaned up some previously converted code that still had little things to polish.

deafee7b

2012-03-14T17:36:15

Continue error conversion This converts blob.c, fileops.c, and all of the win32 files. Also, various minor cleanups throughout the code. Plus, in testing the win32 build, I cleaned up a bunch (although not all) of the warnings with the 64-bit build.

9d160ba8

2012-03-06T01:37:56

diff: Fix rebase breackage

74fa4bfa

2012-02-28T16:14:47

Update diff to use iterators This is a major reorganization of the diff code. This changes the diff functions to use the iterators for traversing the content. This allowed a lot of code to be simplified. Also, this moved the functions relating to outputting a diff into a new file (diff_output.c). This includes a number of other changes - adding utility functions, extending iterators, etc. plus more tests for the diff code. This also takes the example diff.c program much further in terms of emulating git-diff command line options.

01269540

2012-02-23T16:51:07

Fix -Wuninitialized warning Signed-off-by: schu <schu-github@schulog.org>

0534641d

2012-02-22T15:15:35

Fix iterators based on pull request feedback This update addresses all of the feedback in pull request #570. The biggest change was to create actual linked list stacks for storing the tree and workdir iterator state. This cleaned up the code a ton. Additionally, all of the static functions had their 'git_' prefix removed, and a lot of other unnecessary changes were removed from the original patch.

da337c80

2012-02-22T11:22:33

Iterator improvements from diff implementation This makes two changes to iterator behavior: first, advance can optionally do the work of returning the new current value. This is such a common pattern that it really cleans up usage. Second, for workdir iterators, this removes automatically iterating into directories. That seemed like a good idea, but when an entirely new directory hierarchy is introduced into the workdir, there is no reason to iterate into it if there are no corresponding entries in the tree/index that it is being compared to. This second change actually wasn't a lot of code because not descending into directories was already the behavior for ignored directories. This just extends that to all directories.

b6c93aef

2012-02-21T14:46:24

Uniform iterators for trees, index, and workdir This create a new git_iterator type of object that provides a uniform interface for iterating over the index, an arbitrary tree, or the working directory of a repository. As part of this, git ignore support was extended to support push and pop of directory-based ignore files as the working directory is being traversed (so the array of ignores does not have to be recreated at each directory during traveral). There are a number of other small utility functions in buffer, path, vector, and fileops that are included in this patch that made the iterator implementation cleaner.

thodg/libgit2/src/iterator.c

src/iterator.c

Log