|
c23841c8
|
2009-01-03T04:21:30
|
|
Add the binary delta apply algorithm for pack style deltas
The git__delta_apply() function can be used to apply a Git style
delta, such as those used in pack files or in git patch files,
to recover the original object stream.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
bed3229b
|
2009-01-03T03:34:09
|
|
Precompute the fanout decoding and the oid offset in a pack-*.idx
The fanout table is fairly commonly accessed, we need to read it
twice for each object we lookup in any given pack file. Most of
the processors running Git are running in little-endian mode, as
they are variants of the x86 platform, so reading the fanout is
a costly operation as we need to convert from network byte order
to local byte order. By decoding the fanout table into a malloc
obtained buffer we can save these 2 decode operations per lookup
and make search go more quickly.
This also cleans up the initialization of the search functions
by cutting out a few instructions, saving a small amount of time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
a7c60cfc
|
2009-01-03T02:41:26
|
|
Add basic support to read pack-*.idx v1 and v2 files
The index data is mapped into memory and then scanned using a
binary search algorithm to locate the matching entry for the
supplied git_oid. The standard fanout hash trick is applied to
reduce the search space by 8 iterations.
Since the v1 and v2 file formats differ in their search function,
due to the different layouts used for the object records, we use
two different search implementations and a virtual function pointer
to jump to the correct version of code for the current pack index.
The single function jump per-pack should be faster then computing
a branch point inside the inner loop of a common binary search.
To improve concurrency during read operations the pack lock is only
held while verifying the index is actually open, or while opening
the index for the first time. This permits multiple concurrent
readers to scan through the same index.
If an invalid index file is opened we close it and mark the
git_pack's invalid bit to true. The git_pack structure is kept
around in its parent git_packlist, but the invalid bit will cause
all future readers to skip over the pack entirely. Pruning the
invalid entries is relatively unimportant because they shouldn't
be very common, a $GIT_DIRECTORY/objects/pack directory tends to
only have valid pack files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
20e7f426
|
2009-01-03T00:36:10
|
|
Add a simple mmap wrapper for cross-platform mmap usage
Win32 has a variant of mmap that is harder to use than POSIX, but
to run natively and efficiently on Win32 we need some form of it.
gitfo_map_ro() provides a basic mmap function for use in locations
where we need read-only random data access to large ranges of a file,
such as a pack-*.idx.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
098ac57a
|
2009-01-03T00:02:25
|
|
Refactor pack memory management and locking to be safer
Using an atomic reference counter is difficult to make
cross-platform, as the reference count implementations
are generally processor specific. Its also hard to do
a proper multi-read/single-write implementation.
We now use a simple mutex around the reference count for the list
of packs. Readers grab the mutex and either build the list, or
increment the existing one's reference count. When the reader is
done with the list, the reference count is decremented. In this way
parallel readers are able to operate on the list without worrying
about it being deallocated out from under them.
Individual pack structures are held by reference counts, but we
only care about the list the pack structure is held in. There is
no need to increment/decrement the pack reference counts as we
scan through them during a read operation, the caller holds the
git_packlist and that is sufficient to hold the packs it references.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
3a33c7b3
|
2009-01-02T20:51:47
|
|
Fix snprintf compiler warning on cygwin
As far as gcc is concerned, the "z size specifier" is available as
an extension to the language, which is available with or without any
-std= switch. (I think you have to go back to 2.95 for a version
of gcc which doesn't work.) Many other compilers have this as an
extension as well (ie without the equivalent of -std=c99).
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
51eb2f90
|
2009-01-02T21:48:40
|
|
Change the use of asm/atomic.h to require -DGIT_HAS_ASM_ATOMIC
These headers aren't always available; they typically come from the
Linux kernel, but aren't supposed to be exported into the userspace
/usr/include. Modern kernels won't install these and some distros
rm -rf the directory post kernel header install.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
11bb049b
|
2009-01-02T21:41:52
|
|
Fix pthread_mutex based gitrc_dec
The function should return true only when the counter drops to 0.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b438016e
|
2008-12-31T16:20:05
|
|
Find pack files in $GIT_DIR/objects/pack directory on git_odb_open
Currently we only catalog the available pack files into a table,
storing their path names relative to the pack directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
7350e633
|
2008-12-31T16:07:38
|
|
Define gitfo_exists to determine file presence
When scanning the pack directory we need to see if the path
name is present for ".idx" when we discover a ".pack" file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
2c4b7707
|
2008-12-31T16:06:48
|
|
Add git__fmt as an easier to use snprintf
Checking the return value of snprintf is a pain, as it must be
>= 0 and < sizeof(buffer). git__fmt is a simple wrapper to
perform these checks.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
5690f02e
|
2008-12-31T15:35:36
|
|
Rewrite git_foreach_dirent into gitfo_dirent
Our fileops API is currently private. We aren't planning on supplying
a cross-platform file API to applications that link to us. If we did,
we'd probably whole-sale publish fileops, not just the dirent code.
By moving it to be private we can also change the call signature to
permit the buffer to be passed down through the call chain. This is
very helpful when we are doing a recursive scan as we can reuse just
one buffer in all stack frames, reducing the impact the recursion has
on the stack frames in the data cache.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
9eb79764
|
2008-12-31T14:35:39
|
|
Add string utility functions for prefix and suffix compares
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
8ed341c5
|
2008-12-31T21:34:03
|
|
Add a build variable to allow supression of -fvisibility
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
0c01d80a
|
2008-12-31T13:38:47
|
|
Run ranlib on libgit2.a after archiving it
Some linkers require ranlib to build a symbol table on the archive
in order to work with it. Most platforms that don't have this
requirement permit ranlib as a noop.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
5614dc18
|
2008-12-31T13:27:51
|
|
Add basic locking to the git_odb structure
We grab the lock while accessing the alternates list, ensuring that
we only initialize it once for the given git_odb.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
028ef0de
|
2008-12-31T13:20:21
|
|
Add a mutex and atomic counter abstraction and implementations
These abstractions can be used to implement an efficient resource
reference counter and simple mutual exclusion. On pthreads we use
pthread_mutex_t, except when we are also on glibc and can directly
use its asm/atomic.h definitions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d44cfd46
|
2008-12-31T13:16:31
|
|
Cleanup our header inclusion order to ensure pthread.h is early
If we are using threads we need to make sure pthread.h comes
in before just about anything else. Some platforms enable
macros that alter what other headers define.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
4260699b
|
2008-12-31T11:16:41
|
|
Rename the test cases to run in specific orders
This way we can be fairly certain we run tests of lower-level
parts of the library before we run tests of higher-level more
complex parts. If there is any problem in a lower-level part
of the library, the earlier test will identify it and stop,
making it easire to troubleshoot the failure.
A rough naming guide has been added for the test suite to
explain the current category structure.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
5673434f
|
2008-12-31T07:34:43
|
|
Undefine malloc,strdup,calloc before redefining them
Some systems may use cpp macros to define these functions, glibc
appears to be one of them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
7dd8a9f7
|
2008-12-30T23:26:38
|
|
Set GIT_EOSERR when the OS errno should be consulted
This error code indicates the OS error code has a better value
describing the last error, as it is likely a network or local
file IO problem identified by a C library function call.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
64a47c01
|
2008-12-30T23:21:36
|
|
Wrap malloc and friends and report out of memory as GIT_ENOMEM
We now forbid direct use of malloc, strdup or calloc within the
library and instead use wrapper functions git__malloc, etc. to
invoke the underlying library malloc and set git_errno to a no
memory error code if the allocation fails.
In the future once we have pack objects in memory we are likely
to enhance these routines with garbage collection logic to purge
cached pack data when allocations fail. Because the size of the
function will grow somewhat large, we don't want to mark them for
inline as gcc tends to aggressively inline, creating larger than
expected executables.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ffb55c53
|
2008-12-30T22:29:04
|
|
Rename the path of the objects directory to be more specific
We're likely to add additional path data, like the path of the
refs or the path to the config file into the git_odb structure,
as it may grow into the repository wrapper. Changing the name
of the objects directory reference makes it more clear should
we later add something else.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
4c67e2e9
|
2008-12-30T22:25:30
|
|
Change git_odb__read_packed to return ENOTFOUND until implemented
We didn't search for the object, so we cannot possibly promise it
to the caller of git_odb_read().
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
064301cc
|
2008-12-30T22:07:56
|
|
Fix size_t snprintf warning by using PRIuPTR format macro
This is the correct C99 format code for the size_t type when passed
as an argument to the *printf family. If the platform doesn't
define it, we assume %lu and just cross our fingers that its the
proper setting for a size_t on this system. On most sane platforms,
"unsigned long" is the underlying type of "size_t".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
a1d34bc0
|
2008-12-30T21:49:38
|
|
Support building on Mac OS X by using pthread_getspecific for TLS
The Mach-O format does not permit gcc to implement the __thread
TLS specification, so we must instead emulate it using a single
int cell allocated from memory and stored inside of the thread
specific data associated with the current pthread.
What makes this tricky is git_errno must be a valid lvalue, so
we really need to return a pointer to the caller and deference it
as part of the git_errno macro.
The GCC-specific __attribute__((constructor)) extension is used
to ensure the pthread_key_t is allocated before any Git functions
are executed in the library, as this is necessary to access our
thread specific storage.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d7467949
|
2008-12-30T21:50:10
|
|
Remove unnecessary import of stdlib.h from revwalk.h
OS headers are best imported from a more central location anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b3039bee
|
2008-12-30T21:25:13
|
|
Cleanup formatting in our head files to be more consistent
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
213e720c
|
2008-12-20T20:47:41
|
|
Change usages of static inline to GIT_INLINE
Signed-off-by: Julio Espinoza-Sokal <julioes@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
6f6a17db
|
2008-12-31T01:48:36
|
|
Fix pkgconfig file wrt last added dependencies
libz and libcrypto dependencies were added recently while libgit2.pc
did not get updated.
Signed-off-by: Steve Frécinaux <code@istique.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c960d6a3
|
2008-12-27T18:59:43
|
|
Add a routine to determine a git_oid given an git_obj
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
007e0753
|
2008-12-27T18:58:25
|
|
Add some routines for SHA1 hash computation
[sp: Changed signature for output to use git_oid, and added
a test case to verify an allocated git_hash_ctx can be
reinitialized and reused.]
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
42fd40db
|
2008-12-27T18:56:16
|
|
Fix a bug in gitfo_read_file()
In particular, when asked to read an empty file, this function
calls malloc() with a zero size allocation request. Standard C
says that the behaviour of malloc() in this case is implementation
defined.
[C99, 7.20.3 says "... If the size of the space requested is zero,
the behavior is implementation-defined: either a null pointer is
returned, or the behavior is as if the size were some nonzero
value, except that the returned pointer shall not be used to
access an object."]
Finesse the issue by over-allocating by one byte. Setting the extra
byte to '\0' may also provide a useful sentinel for text files.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d7fbfe15
|
2008-12-30T12:10:01
|
|
Add pkg-config support.
The libgit2.pc is generated on make install and installed, to allow
using the lib through the pkg-config helper.
Signed-off-by: Steve Frécinaux <code@istique.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
5ddbd5ed
|
2008-12-30T12:10:00
|
|
Add make install and uninstall targets.
It accepts a prefix= parameter (default: /usr/local).
Signed-off-by: Steve Frécinaux <code@istique.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3d3552e8
|
2008-12-18T22:58:10
|
|
Implement git_odb__read_loose()
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
75d58430
|
2008-12-18T22:56:14
|
|
Add a file reading routine along with an io buffer type
In particular, the gitfo_read_file() routine can be used to slurp
the complete file contents into an gitfo_buf structure. The buffer
content will be allocated by malloc() and may be released by the
gitfo_free_buf() routine. The io buffer type can be initialised
on the stack with the GITFO_BUF_INIT macro.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
def425bf
|
2008-12-18T08:20:50
|
|
Remove references to src/git/config.h
It was removed in ec250c6e18e56d12714f9010e1b15e5feec5f473.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c18626ee
|
2008-12-18T08:17:05
|
|
Run tests in their own subdirectory
This way tests can run in parallel without stepping on each other's
temporary work files. If a test passes the directory is removed
completely; if a test fails only empty directories are removed.
This permits inspection of the failed test's left behind state.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
7b6e8067
|
2008-12-10T18:31:28
|
|
Add some git_otype string conversion and testing routines
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b3be0fc7
|
2008-12-03T23:54:47
|
|
Fix an "implicit function definition" warning on cygwin
In particular, the warning relates to malloc(), which is
declared in <stdlib.h>. This header is now included,
indirectly, via the "common.h" header.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
5ee2fe77
|
2008-12-03T23:53:55
|
|
Add a GIT_PATH_MAX constant
The PATH_MAX symbol is often, but not always, defined
in the <limits.h> header. In particular, on cygwin you
need to include this header to avoid a compilation error.
However, some systems define PATH_MAX to be something as
small as 256, which POSIX is happy to allow, while others
allow much larger values. In general it can vary from
one filesystem to another.
In order to avoid the vagaries of different systems, define
our own symbol.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
192678b5
|
2008-12-03T23:52:57
|
|
Fix some doxygen warnings and errors
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
4b8e8b32
|
2008-12-03T10:27:48
|
|
Add Adam Simpkins to list of consenting authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
|
|
|
af795e49
|
2008-12-02T09:56:23
|
|
Add routines to convert git_oid to hex strings
[sp: Credit for some of this implementation goes to Pieter, I
started off a patch he proposed for libgit2 but reworked
enough of it that I don't want to blame him for any bugs.]
Suggested-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b72ca267
|
2008-11-29T19:21:24
|
|
Diasble TLS on cygwin
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
17643760
|
2008-11-29T19:20:07
|
|
Use __CHECKER__ to detect when sparse is running
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
80133dad
|
2008-11-29T19:19:31
|
|
Use cgcc in the sparse target
cgcc is the recommended way to run sparse, since it provides
many -Defines suitable to the given gcc platform. For example,
on some Ubuntu/glibc versions, a plain sparse invocation gives
the following warning:
"warning: This machine appears to be neither x86_64 nor i386."
Using "cgcc -no-compile" instead eliminates this warning.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
43288a07
|
2008-11-29T19:18:43
|
|
Fixup documentation to reflect the "git_obj" rename
commit dff79e27d3d2cdc09790ded80fe2ea8ff5d61034 renamed
the (small object) "git_sobj" to a plain "git_obj", but
neglected to update some of the documentation to reflect
that change.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ea790f33
|
2008-11-29T15:34:20
|
|
Add a dirent walker to the fileops API
Since at least MS have something like GetFirstDirEnt() and
GetNextDirEnt() (presumably with superior performance), we
can let MS hackers add support for a dirent walker using
that API instead, while we stick with the posix-style
readdir() calls.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
4188d28f
|
2008-11-29T15:28:12
|
|
Add an io caching layer to the gitfo api
The idea is taken from Junio's work in read-cache.c, where
it's used for writing out the index without tap-dancing on
the poor harddrive. Since it's almost certainly useful for
cached writing of packfiles too, we turn it into a generic
API, making it perfectly simple to reuse it later.
gitfo_write_cached() has the same contract as gitfo_write(), it
returns GIT_SUCCESS if all bytes are successfully written (or were
at least buffered for later writing), and <0 if an error occurs
during buffer writing.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ec250c6e
|
2008-11-23T22:37:55
|
|
Remove config.h and make fileops an internal API
Since it doesn't make sense to make the disk access stuff
portable *AND* public (that's a job for each application
imo), we can take a shortcut and just support unixy stuff
for now and get away with coding most of it as macros.
Since we go with an internal API for starters and only
provide higher-level API's to the libgit users, we'll be
ok with this approach.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
42c07750
|
2008-11-27T09:26:52
|
|
doxygen config: Update path to public headers
In d4043ee9d97031e94f205110996d2381dd26c540, public headers
were moved from include/git to src/git, but the doxygen
configuration wasn't updated to reflect this. This patch
amends that slippage, making documentation generation once
again work as intended.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
634a64b1
|
2008-11-22T14:04:25
|
|
Add a new author state "ign" to git.git-authors
This is to be used for application code that currently
resides in git, but only for authors whose only not
insignificant contributions are for that code (such as
"imap-send").
Presently, this is used for Mike McCormack and Robert
Shearman.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
9e300586
|
2008-11-25T16:28:51
|
|
Add Kristian Høgsberg to the list of consenting authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
0cfd861b
|
2008-11-22T14:03:06
|
|
Add Adam Simpkins as ??? to git.git-authors
Adam has made significant contributions to the http
transport code, but his listed email address is no longer
valid.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6e9ac9c8
|
2008-11-22T14:02:07
|
|
Add René Scharfe to git.git-authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
f2b93d41
|
2008-11-21T09:26:57
|
|
Add Matthieu Moy and Steffen Prohaska to git.git-authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
cc7301d8
|
2008-11-20T16:25:41
|
|
Add Sven Verdoolaege to git.git-authors
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ae234862
|
2008-11-18T22:20:15
|
|
Add an embryo of a TLS-aware error handling system
This adds the per-thread global variable git_errno to the
system, which callers can examine to get information about
an error.
Two helper functions are added to reduce LoC-count for the
library code itself.
Also, some exceptions are made for running sparse on GIT_TLS
definitions, since it doesn't grok thread-local variables at
all.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3a2aabdc
|
2008-11-22T14:44:47
|
|
Add util.h - utility macros
ARRAY_SIZE() et al go in util.h, included from common.h
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
76a8c447
|
2008-11-22T14:42:12
|
|
Add internal common.h file
This one pulls in compiler compatibility macros, some
common header files, and also the public common.h header.
C source files are modified to use the private common.h
in favour of the public one.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
f501265f
|
2008-11-22T14:40:51
|
|
Add cc-compat.h - C compiler compat macros for internal use
Holds things such as FLEX_ARRAY and whatnot.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c215be41
|
2008-11-22T14:57:40
|
|
Rename git_revpool_* functions gitrp_*
Otherwise their prototypes don't match their declarations.
Detected by 'sparse', which is obviously good to run
before each commit.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3e1d42b7
|
2008-11-18T22:17:40
|
|
Add a 'sparse' make target
Given the confusion on git@vger, we'd better not name
this target "check" or (worse) "test", but it's still
useful to have. As "sparse", noone should have problems
understanding what it does.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ff7c7576
|
2008-11-22T13:05:32
|
|
s/COPYING/.HEADER/ for install-headers target
We don't want to prepend the entire license; Only the
file header part of it.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
4f0adcd0
|
2008-11-18T21:28:55
|
|
Get rid of GIT__PRIVATE macro
Using it in the first place means something's wrong.
This patch replaces it with an internal header which
carries the previously "protected" code instead.
Internal source-files simply include "commit.h" and
they're done. The internal header includes the public
one to make sure we always use the proper prototype.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c6ebb4a9
|
2008-11-22T15:17:17
|
|
Remove license top-comment from public header files
Since it's being added when we install the headers anyway,
we might as well get rid of it. If anything, we should point
coders to the COPYING file in the project's root directory
instead of duplicating the same (large-ish) text everywhere.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ab3f234e
|
2008-11-22T15:35:31
|
|
Make using CFLAGS a bit simpler
This patch introduces the $(ALL_CFLAGS) variable, which holds
$(BASIC_CFLAGS) as well as userdefined $(CFLAGS) and then
consistently uses that variable where both were used anyway.
Since we're in the area, we optimize the sparse running a
bit, getting rid of the shell and just letting sparse iterate
over the files.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6013ffa6
|
2008-11-22T15:33:15
|
|
Add $(CONFIG_H) as a build-dependency for sparse
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
21648b45
|
2008-11-22T15:25:59
|
|
Make src/git/config.h a macro in Makefile
This makes it far more convenient to reference as a dependency
for other targets.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
36f0f61f
|
2008-11-18T19:06:25
|
|
Add compiler/platform agnostic thread-local storage
It doesn't cover all cases, but we can work on those as
we go along. For now, gcc, MSVC++, Intel C/C++, IBM XL C/C++,
Sun Studio C/C++ and Borland C++ Builder are the supported
compilers (although we boldly assume that they all are of
a recent enough version to support thread-local storage).
This is intended to be used in upcoming patches that implement
graceful (but TLS-dependant) error-handling in the library.
As an added bonus, we also bring the online_cpus() function
from git.git to detect the number of usable cpu's.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
a57e9a8c
|
2008-11-18T01:27:29
|
|
Add a fake and phony install-headers target
It actually does what it's supposed to (more or less),
but not very portably and not to the correct directory.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d4043ee9
|
2008-11-18T01:18:52
|
|
Move public headers to src/git
It's arguably smoother to keep them close to the source,
as that's where one's working when modifying them. More
importantly, though, is the ability to use private headers
in the src/ dir that simply include "git/$samename.h" to
get to the public API at the same time.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
dff79e27
|
2008-11-18T00:59:36
|
|
Rename "git_sobj" "git_obj"
The 's' never really made sense, since it's not a "small"
object at all, but rather a plain object. As such, it should
have a "plain" object name.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
257bd746
|
2008-11-18T00:58:02
|
|
Use same-directory include for public headers
It doesn't make sense to use "git/somefile.h" in the
public git headers, as it's quite likely that projects
using them will have a git directory themselves. This
alters it, making the public headers look for headers
in the same directory they themselves are in.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
eb160e94
|
2008-11-17T23:15:30
|
|
List git.git authors consenting to relicense their code
Since re-using code from git.git proper is the quick way
forward, we need to list those who have given their consent
to do just that. The relicense permission is only valid for
use with libgit2, and only for GPLv2 + gcc-exception (as
specified by 'COPYING'.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
1b9e92c7
|
2008-11-18T01:02:27
|
|
s/git_revp/git_revpool/
git_revp is something I personally can't stop pronouncing
"rev pointer". I'm sure others would suffer the same
problem.
Also, rename the git_revp_ sub-api "gitrp_". This is the
first of many such renames, primarily done to prevent
extreme inflation in the "git_" namespace, which we'd like
to reserve for a higher-level API.
While we're at it, we remove the noise-char "c" from a lot
of functions. Since revision walking is all about commits,
the common case should be that we're dealing with commits.
Exceptions can get a more mnemonic description as needed.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
8b6f008e
|
2008-11-03T18:53:09
|
|
Add a zlib support shell
Some versions of zlib don't have a deflateBound defined, so
we define it ourselves after including zlib.h.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
1699efc4
|
2008-11-03T18:39:37
|
|
Implement some of the basic git_odb open and close API
Far from being complete, but its a good start.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
2dbdb824
|
2008-11-03T18:38:57
|
|
Add git_fsize to the os file API
This permits us to get the size of an opened file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b7c891c6
|
2008-11-03T17:31:16
|
|
Add git_oid_cpy, git_oid_cmp as inline functions
These are easily built off the standard C library functions memcpy
and memcmp. By marking these inline we stand a good chance of
the C compiler replacing the entire thing with tight machine code,
because many compilers will actually inline a memcmp or memcpy when
the 3rd argument (the size) is a constant value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3e9e6909
|
2008-11-03T17:14:25
|
|
Redefine git_fread, git_fwrite to transfer the whole unit
We never want to accept a short read or a short write when
transferring data to or from a local file.
Either the entire read (or write) completes or the operation
failed and we will not recover gracefully from it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
367ab010
|
2008-11-03T18:19:02
|
|
Add an extra oid test to verify control characters aren't read
We only want hex digits to be read, any other character in the 8-bit
character set is invalid within an id string.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
fbbfdf9f
|
2008-11-03T16:29:56
|
|
Move GIT_NORETURN into test_lib.h only
We should never have a noreturn style function in the library
itself, as such a function would prevent the calling application
from handling error conditions the way it wants.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b81dd80e
|
2008-11-03T18:38:12
|
|
Change test_main to run a single test case out of the suite
By passing the name of the test function on the command line
we execute exactly that one test, and then exit successfully
if the test did not fail. This permits multiple functions in
the same .c file, so they could be called from a shell script
or debugged independently externally.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b923f2f9
|
2008-11-03T17:00:54
|
|
Fix Makefile to correctly handle 'make -j4 test'
If we have more than one test build running we cannot use the same
file for each test case; instead we need to use a per-test path so
there aren't any collisions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b3a2f90e
|
2008-11-03T18:00:49
|
|
Enable warnings by default and fix warning in oid.c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3b8ab0b9
|
2008-11-03T16:29:03
|
|
Fix GIT_EXTERN to actually mark the prototype as extern
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
8722a77e
|
2008-11-03T17:52:59
|
|
Correct indentation in git/odb.h
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
15bffce9
|
2008-11-01T18:14:22
|
|
Create a basic test suite for the library and test oid functions
This is a horribly simple test suite that makes it fairly easy to
put together some basic function level unit tests on the library.
Its patterned somewhat after the test suite in git.git, but also
after the "Check" test library.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
16a67770
|
2008-11-01T16:53:06
|
|
Create a micro abstraction around the POSIX file APIs
This way we can start to write IO code to read and write files in the
Git object database, but provide a hook to inject native Win32 APIs
instead so libgit2 can be ported to run natively on that platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
50298f44
|
2008-11-01T15:55:01
|
|
Switch the license from BSD to GPL+libgcc exception
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d1ea30c3
|
2008-11-01T15:42:23
|
|
Move include files to include/git/, drop git_ prefix from file names
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3e89665e
|
2008-10-31T18:34:02
|
|
Scratch the git_revp_attr configuration of a git_revp
This isn't the best idea I've head. Pierre Habouzit was suggesting
a technique of assigning a unique integer to each commit and then
allocating storage out of auxiliary pools, using the commit's unique
integer to index into any auxiliary pool in constant time. This way
both applications and the library can efficiently attach arbitrary
data onto a commit, such as rewritten parents, or flags, and have
them disconnected from the main object hash table.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6dafd056
|
2008-10-31T18:30:22
|
|
Document the return NULL style of calling convention
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6533aadc
|
2008-10-31T18:23:01
|
|
Drop the _t suffix as it is a POSIX reserved namespace
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
de2220a4
|
2008-10-31T18:16:26
|
|
Replace git_result_t with int
This seems to be preferred on the mailing list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
4f9339df
|
2008-10-31T15:10:51
|
|
Hide non-exported symbols when linking the library
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
06160502
|
2008-10-31T12:30:28
|
|
Take the first stab at defining revision traversal
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|