|
585b5dac
|
2017-11-18T15:43:11
|
|
refcount: make refcounting conform to aliasing rules
Strict aliasing rules dictate that for most data types, you are not
allowed to cast them to another data type and then access the casted
pointers. While this works just fine for most compilers, technically we
end up in undefined behaviour when we hurt that rule.
Our current refcounting code makes heavy use of casting and thus
violates that rule. While we didn't have any problems with that code,
Travis started spitting out a lot of warnings due to a change in their
toolchain. In the refcounting case, the code is also easy to fix:
as all refcounting-statements are actually macros, we can just access
the `rc` field directly instead of casting.
There are two outliers in our code where that doesn't work. Both the
`git_diff` and `git_patch` structures have specializations for generated
and parsed diffs/patches, which directly inherit from them. Because of
that, the refcounting code is only part of the base structure and not of
the children themselves. We can help that by instead passing their base
into `GIT_REFCOUNT_INC`, though.
|
|
0c7f49dd
|
2017-06-30T13:39:01
|
|
Make sure to always include "common.h" first
Next to including several files, our "common.h" header also declares
various macros which are then used throughout the project. As such, we
have to make sure to always include this file first in all
implementation files. Otherwise, we might encounter problems or even
silent behavioural differences due to macros or defines not being
defined as they should be. So in fact, our header and implementation
files should make sure to always include "common.h" first.
This commit does so by establishing a common include pattern. Header
files inside of "src" will now always include "common.h" as its first
other file, separated by a newline from all the other includes to make
it stand out as special. There are two cases for the implementation
files. If they do have a matching header file, they will always include
this one first, leading to "common.h" being transitively included as
first file. If they do not have a matching header file, they instead
include "common.h" as first file themselves.
This fixes the outlined problems and will become our standard practice
for header and source files inside of the "src/" from now on.
|
|
0fb4b351
|
2017-06-30T13:27:26
|
|
Fix missing include for header files
Some of our header files are not included at all by any of their
implementing counter-parts. Including them inside of these files leads
to some compile errors mostly due to unknown types because of missing
includes. But there's also one case where a declared function does not
match the implementation's prototype.
Fix all these errors by fixing up the prototype and adding missing
includes. This is preparatory work for fixing up missing includes in the
implementation files.
|
|
459fb8fe
|
2017-06-30T15:35:46
|
|
win32: fix circular include deps with w32_crtdbg
The current order of declarations and includes between "common.h" and
"w32_crtdbg_stacktrace.h" is rather complicated. Both header files make
use of things defined in the other one and are thus circularly dependent
on each other. This makes it currently impossible to compile the
"w32_crtdbg_stacktrace.c" file when including "common.h" inside of
"w32_crtdbg_stacktrace.h".
We can disentangle the mess by moving declaration of the inline crtdbg
functions into the "w32_crtdbg_stacktrace.h" file and adding additional
includes inside of it, such that all required functions are available to
it. This allows us to break the dependency cycle.
|
|
d34f6826
|
2014-04-08T17:18:47
|
|
Patch parsing from patch files
|
|
ea445e06
|
2015-07-07T00:48:17
|
|
Merge pull request #3288 from ethomson/getenv
git__getenv: utf-8 aware env reader
|
|
e069c621
|
2015-07-02T09:25:48
|
|
git__getenv: utf-8 aware env reader
Introduce `git__getenv` which is a UTF-8 aware `getenv` everywhere.
Make `cl_getenv` use this to keep consistent memory handling around
return values (free everywhere, as opposed to only some platforms).
|
|
93b42728
|
2015-06-09T14:38:30
|
|
Include stacktrace summary in memory leak output.
|
|
75a4636f
|
2015-05-29T16:56:38
|
|
git__tolower: a tolower() that isn't dumb
Some brain damaged tolower() implementations appear to want to
take the locale into account, and this may require taking some
insanely aggressive lock on the locale and slowing down what should
be the most trivial of trivial calls for people who just want to
downcase ASCII.
|
|
d06c589f
|
2015-04-10T06:15:06
|
|
Add MSVC CRTDBG memory leak reporting.
|
|
f1453c59
|
2015-02-12T12:19:37
|
|
Make our overflow check look more like gcc/clang's
Make our overflow checking look more like gcc and clang's, so that
we can substitute it out with the compiler instrinsics on platforms
that support it. This means dropping the ability to pass `NULL` as
an out parameter.
As a result, the macros also get updated to reflect this as well.
|
|
190b76a6
|
2015-02-11T14:52:08
|
|
Introduce git__add_sizet_overflow and friends
Add some helper functions to check for overflow in a type-specific
manner.
|
|
8d534b47
|
2015-02-11T13:01:00
|
|
p_read: ensure requested len is ssize_t
Ensure that the given length to `p_read` is of ssize_t and ensure
that callers test the return as if it were an `ssize_t`.
|
|
2884cc42
|
2015-02-11T09:39:38
|
|
overflow checking: don't make callers set oom
Have the ALLOC_OVERFLOW testing macros also simply set_oom in the
case where a computation would overflow, so that callers don't
need to.
|
|
3603cb09
|
2015-02-10T23:13:49
|
|
git__*allocarray: safer realloc and malloc
Introduce git__reallocarray that checks the product of the number
of elements and element size for overflow before allocation. Also
introduce git__mallocarray that behaves like calloc, but without the
`c`. (It does not zero memory, for those truly worried about every
cycle.)
|
|
392702ee
|
2015-02-09T23:41:13
|
|
allocations: test for overflow of requested size
Introduce some helper macros to test integer overflow from arithmetic
and set error message appropriately.
|
|
d8b5c8c3
|
2015-01-15T15:16:19
|
|
Remove strlen() calls from loop condition
Avoid str length recalculation every iteration
|
|
7cf86f92
|
2014-12-28T10:35:26
|
|
Added AmigaOS-specific implementation of git__timer().
The clock_gettime() function is normally not available under
AmigaOS, hence another solution is required. We are using now
GetUpTime() that is present in current versions of this
operating system.
|
|
fe5f7722
|
2014-12-23T11:27:01
|
|
don't treat 0x85 as whitespace
A byte value of 0x85 is not whitespace, we were conflating that with
U+0085 (UTF8: 0xc2 0x85). This caused us to incorrectly treat valid
multibyte characters like U+88C5 (UTF8: 0xe8 0xa3 0x85) as whitespace.
|
|
8e35527d
|
2014-12-16T13:03:02
|
|
path: Use UTF8 iteration for HFS chars
|
|
a64119e3
|
2014-11-25T18:13:00
|
|
checkout: disallow bad paths on win32
Disallow:
1. paths with trailing dot
2. paths with trailing space
3. paths with trailing colon
4. paths that are 8.3 short names of .git folders ("GIT~1")
5. paths that are reserved path names (COM1, LPT1, etc).
6. paths with reserved DOS characters (colons, asterisks, etc)
These paths would (without \\?\ syntax) be elided to other paths - for
example, ".git." would be written as ".git". As a result, writing these
paths literally (using \\?\ syntax) makes them hard to operate with from
the shell, Windows Explorer or other tools. Disallow these.
|
|
3822d2cc
|
2014-08-05T15:06:45
|
|
Fix typo in timer normalization constants
The effect of this would be that various update callbacks would
not be made at the correct interval.
|
|
947a58c1
|
2014-05-30T13:19:49
|
|
Clean up the handling of large binary diffs
|
|
cd424ad5
|
2014-04-28T16:39:53
|
|
Add GIT_STATUS_OPT_UPDATE_INDEX and use trace API
This adds an option to refresh the stat cache while generating
status. It also rips out the GIT_PERF stuff I had an makes use
of the trace API to keep statistics about what happens during diff.
|
|
240f4af3
|
2014-04-28T14:04:29
|
|
Add build option for diff internal statistics
|
|
7110000d
|
2014-04-22T10:21:19
|
|
React to feedback for UTF-8 <-> WCHAR and reparse work
|
|
3b4c401a
|
2014-02-10T13:20:08
|
|
Decouple index iterator sort from index
This makes the index iterator honor the GIT_ITERATOR_IGNORE_CASE
and GIT_ITERATOR_DONT_IGNORE_CASE flags without modifying the
index data itself. To take advantage of this, I had to export a
number of the internal index entry comparison functions. I also
wrote some new tests to exercise the capability.
|
|
8e14b47f
|
2014-04-10T12:42:29
|
|
Introduce git__date_rfc2822_fmt. Allows for RFC2822 date headers
|
|
24f3024f
|
2014-02-05T14:31:01
|
|
Split p_strlen into its own header
We need this from util.h and posix.h, but the latter includes common.h
which includes util.h, which means p_strlen is not defined by the time
we get to git__strndup().
Split the definition on p_strlen() off into its own header so we can use
it in util.h.
|
|
1e6f0ac4
|
2014-02-05T13:49:51
|
|
utils: don't reimplement strnlen
The standard library provides a very nice strnlen function, which knows
to use SSE, let's not reimplement it ourselves.
|
|
816d28e7
|
2013-10-01T12:56:47
|
|
Mark git__timer as inline on OSX
|
|
b176eded
|
2013-09-19T14:52:57
|
|
Initial Implementation of progress reports during push
This adds the basics of progress reporting during push. While progress
for all aspects of a push operation are not reported with this change,
it lays the foundation to add these later. Push progress reporting
can be improved in the future - and consumers of the API should
just get more accurate information at that point.
The main areas where this is lacking are:
1) packbuilding progress: does not report progress during deltafication,
as this involves coordinating progress from multiple threads.
2) network progress: reports progress as objects and bytes are going
to be written to the subtransport (instead of as client gets
confirmation that they have been received by the server) and leaves
out some of the bytes that are transfered as part of the push protocol.
Basically, this reports the pack bytes that are written to the
subtransport. It does not report the bytes sent on the wire that
are received by the server. This should be a good estimate of
progress (and an improvement over no progress).
|
|
191adce8
|
2013-08-27T20:00:28
|
|
vector: Teach git_vector_uniq() to free while deduplicating
|
|
a1f69452
|
2013-08-08T12:36:11
|
|
git_strndup fix when OOM
|
|
d730d3f4
|
2013-07-31T16:40:42
|
|
Major rename detection changes
After doing further profiling, I found that a lot of time was
being spent attempting to insert hashes into the file hash
signature when using the rolling hash because the rolling hash
approach generates a hash per byte of the file instead of one
per run/line of data.
To optimize this, I decided to convert back to a run-based file
signature algorithm which would be more like core Git.
After changing this, a number of the existing tests started to
fail. In some cases, this appears to have been because the test
was coded to be too specific to the particular results of the file
similarity metric and in some cases there appear to have been bugs
in the core rename detection code where only by the coincidence
of the file similarity scoring were the expected results being
generated.
This renames all the variables in the core rename detection code
to be more consistent and hopefully easier to follow which made it
a bit easier to reason about the behavior of that code and fix the
problems that I was seeing. I think it's in better shape now.
There are a couple of tests now that attempt to stress test the
rename detection code and they are quite slow. Most of the time
is spent setting up the test data on disk and in the index. When
we roll out performance improvements for index insertion, it
should also speed up these tests I hope.
|
|
302a04b0
|
2013-06-29T12:41:39
|
|
Add accessors for refcount value
|
|
e3b4a47c
|
2013-05-31T16:30:09
|
|
git__strcasesort_cmp: strcasecmp sorting rules but requires strict equality
|
|
3425fee6
|
2013-06-17T14:27:34
|
|
util: git__memzero() tweaks
On Linux: fix a warning message related to the volatile qualifier (cast)
On Windows: use SecureZeroMemory()
On both, inline the call, so that no entry point can lead back to this "secure" memory zeroing.
|
|
6de9b2ee
|
2013-06-12T21:10:33
|
|
util: It's called `memzero`
|
|
eb58e2d0
|
2013-06-12T21:05:48
|
|
Merge remote-tracking branch 'arrbee/minor-paranoia' into development
|
|
114f5a6c
|
2013-06-10T10:10:39
|
|
Reorganize diff and add basic diff driver
This is a significant reorganization of the diff code to break it
into a set of more clearly distinct files and to document the new
organization. Hopefully this will make the diff code easier to
understand and to extend.
This adds a new `git_diff_driver` object that looks of diff driver
information from the attributes and the config so that things like
function content in diff headers can be provided. The full driver
spec is not implemented in the commit - this is focused on the
reorganization of the code and putting the driver hooks in place.
This also removes a few #includes from src/repository.h that were
overbroad, but as a result required extra #includes in a variety
of places since including src/repository.h no longer results in
pulling in the whole world.
|
|
3e9e6cda
|
2013-06-07T09:54:33
|
|
Add safe memset and use it
This adds a `git__memset` routine that will not be optimized away
and updates the places where I memset() right before a free() call
to use it.
|
|
d958e37a
|
2013-05-17T17:21:45
|
|
Fix issues with git_diff_find_similar
There are a number of bugs in the rename code that only were
obvious when I started testing it against large old repos with
more complex patterns. (The code to do that testing is not ready
to merge with libgit2, but I do plan to add more thorough tests.)
This contains a significant number of changes and also tweaks the
public API slightly to make emulating core git easier.
Most notably, this separates the GIT_DIFF_FIND_AND_BREAK_REWRITES
flag into FIND_REWRITES (which adds a self-similarity score to
every modified file) and BREAK_REWRITES (which splits the modified
deltas into add/remove pairs in the diff list). When you do a raw
output of core git, rewrites show up as M090 or such, not at A and
D output, so I wanted to be able to emulate that.
Publicly, this also changes the flags to be uint16_t since we
don't need values out of that range.
Internally, this contains significant changes from a number of
small bug fixes (like using the wrong side of the diff to decide
if the object could be found in the ODB vs the workdir) to larger
issues about which files can and should be compared and how the
various edge cases of similarity scores should be treated.
Honestly, I don't think this is the last update that will have to
be made to this code, but I think this moves us closer to correct
behavior and I tried to document the code so it would be easier
to follow..
|
|
0cb16fe9
|
2013-05-15T20:26:55
|
|
Unify whitespaces to tabs
|
|
05b17964
|
2013-04-21T19:26:35
|
|
Make refcounting atomic
|
|
53607868
|
2013-04-15T00:09:03
|
|
Further threading fixes
This builds on the earlier thread safety work to make it so that
setting the odb, index, refdb, or config for a repository is done
in a threadsafe manner with minimized locking time. This is done
by adding a lock to the repository object and using it to guard
the assignment of the above listed pointers. The lock is only
held to assign the pointer value.
This also contains some minor fixes to the other work with pack
files to reduce the time that locks are being held to and fix an
apparently memory leak.
|
|
e976b56d
|
2013-04-15T14:27:53
|
|
Add git__compare_and_swap and use it
This removes the lock from the repository object and changes the
internals to use the new atomic git__compare_and_swap to update
the _odb, _config, _index, and _refdb variables in a threadsafe
manner.
|
|
4dcd8780
|
2013-04-19T17:17:44
|
|
Move refdb_backend to include/git2/sys
This moves most of the refdb stuff over to the include/git2/sys
directory, with some minor shifts in function organization.
While I was making the necessary updates, I also removed the
trailing whitespace in a few files that I modified just because I
was there and it was bugging me.
|
|
62beacd3
|
2013-03-11T16:43:58
|
|
Sorting function cleanup and MinGW fix
Clean up some sorting function stuff including fixing qsort_r
on MinGW, common function pointer type for comparison, and basic
insertion sort implementation (which we, regrettably, fall back
on for MinGW).
|
|
e40f1c2d
|
2013-03-08T16:39:57
|
|
Make tree iterator handle icase equivalence
There is a serious bug in the previous tree iterator implementation.
If case insensitivity resulted in member elements being equivalent
to one another, and those member elements were trees, then the
children of the colliding elements would be processed in sequence
instead of in a single flattened list. This meant that the tree
iterator was not truly acting like a case-insensitive list.
This completely reworks the tree iterator to manage lists with
case insensitive equivalence classes and advance through the items
in a unified manner in a single sorted frame.
It is possible that at a future date we might want to update this
to separate the case insensitive and case sensitive tree iterators
so that the case sensitive one could be a minimal amount of code
and the insensitive one would always know what it needed to do
without checking flags.
But there would be so much shared code between the two, that I'm
not sure it that's a win. For now, this gets what we need.
More tests are needed, though.
|
|
41051e3f
|
2013-02-20T17:09:51
|
|
signature: Shut up MSVC, you silly goose
|
|
15760c59
|
2013-02-01T19:21:55
|
|
Use malloc rather than calloc
|
|
c4beee76
|
2013-02-01T10:00:55
|
|
Introduce git__substrdup
|
|
11d9f6b3
|
2013-01-27T14:17:07
|
|
Vector improvements and their fallout
|
|
851ad650
|
2013-01-09T16:00:16
|
|
Add payload "_r" versions of bsearch and tsort
git__bsearch and git__tsort did not pass a payload through to the
comparison function. This makes it impossible to implement sorted
lists where the sort order depends on external data (e.g. building
a secondary sort order for the entries in a tree). This commit
adds git__bsearch_r and git__tsort_r versions that pass a third
parameter to the cmp function of a user payload.
|
|
359fc2d2
|
2013-01-08T17:07:25
|
|
update copyrights
|
|
7fcec834
|
2012-12-11T22:31:21
|
|
fetchhead reading/iterating
|
|
a277345e
|
2012-11-14T22:37:13
|
|
Create internal strcmp variants for function ptrs
Using the builtin strcmp and strcasecmp as function pointers is
problematic on win32. This adds internal implementations and
divorces us from the platform linkage.
|
|
55cbd05b
|
2012-11-08T16:56:34
|
|
Some diff refactorings to help code reuse
There are some diff functions that are useful in a rewritten
checkout and this lays some groundwork for that. This contains
three main things:
1. Share the function diff uses to calculate the OID for a file
in the working directory (now named `git_diff__oid_for_file`
2. Add a `git_diff__paired_foreach` function to iterator over
two diff lists concurrently. Convert status to use it.
3. Move all the string/prefix/index entry comparisons into
function pointers inside the `git_diff_list` object so they
can be switched between case sensitive and insensitive
versions. This makes them easier to reuse in various
functions without replicating logic. As part of this, move
a couple of index functions out of diff.c and into index.c.
|
|
2364735c
|
2012-11-09T15:39:10
|
|
Fix implementation of strndup to not overrun
|
|
ec40b7f9
|
2012-09-17T15:42:41
|
|
Support for core.ignorecase
|
|
02a0d651
|
2012-07-12T16:31:59
|
|
Add git_buf_unescape and git__unescape to unescape all characters in a string (in-place)
|
|
48bcf81d
|
2012-07-12T09:32:44
|
|
Merge pull request #812 from arrbee/assorted-tweaks
Assorted goodies
|
|
c3a875c9
|
2012-07-10T15:20:08
|
|
Adding unicode space to match crlf patterns
Adding 0x85 to `git__isspace` since we also look for that in filter.c
as a whitespace character.
|
|
98d6a1fd
|
2012-07-04T16:24:09
|
|
util: add git__isdigit()
|
|
494ae940
|
2012-07-02T17:51:02
|
|
revparse: fix parsing of date specifiers
|
|
8a385c04
|
2012-06-06T12:25:22
|
|
Move git__date_parse declaration to util.h.
|
|
56a5000d
|
2012-06-05T12:52:44
|
|
Merge branch 'development' into rev-parse
Conflicts:
src/util.h
tests-clar/refs/branches/listall.c
|
|
29e948de
|
2012-05-10T10:38:10
|
|
global: Change parameter ordering in API
Consistency is good.
|
|
1ce4cc01
|
2012-05-15T15:41:05
|
|
Fix date.c build in msvc.
Ported the win32 implementations of gmtime_r,
localtime_r, and gettimeofday to be part of the
posix compatibility layer, and fixed
git_signature_now to use them.
|
|
41a82592
|
2012-05-15T14:17:39
|
|
Ranged iterators and rewritten git_status_file
The goal of this work is to rewrite git_status_file to use the
same underlying code as git_status_foreach.
This is done in 3 phases:
1. Extend iterators to allow ranged iteration with start and
end prefixes for the range of file names to be covered.
2. Improve diff so that when there is a pathspec and there is
a common non-wildcard prefix of the pathspec, it will use
ranged iterators to minimize excess iteration.
3. Rewrite git_status_file to call git_status_foreach_ext
with a pathspec that covers just the one file being checked.
Since ranged iterators underlie the status & diff implementation,
this is actually fairly efficient. The workdir iterator does
end up loading the contents of all the directories down to the
single file, which should ideally be avoided, but it is pretty
good.
|
|
a346992f
|
2012-05-10T09:47:14
|
|
Rev-parse: @{time} syntax.
Ported date.c (for approxidate_careful) from git.git
revision aa39b85. Trimmed out the parts we're not
using.
|
|
9cd25d00
|
2012-05-09T13:21:21
|
|
util: Fix git__isspace() implementation
The characters <space>, <form-feed>, <newline>, <carriage-return>, <tab>, and <vertical-tab> are part of the "space" definition.
cf. http://www.kernel.org/doc/man-pages/online/pages/man5/locale.5.html
|
|
0f49200c
|
2012-05-09T04:37:02
|
|
msvc: Do not use `isspace`
Locale-aware bullshit bitting my ass again yo
|
|
3fbcac89
|
2012-05-02T19:56:38
|
|
Remove old and unused error codes
|
|
25f258e7
|
2012-04-23T09:21:15
|
|
Moving power-of-two bit utilities into util.h
|
|
dda708e7
|
2012-03-09T19:55:50
|
|
error-handling: On-disk config file backend
Includes:
- Proper error reporting when encountering syntax errors in a
config file (file, line number, column).
- Rewritten `config_write`, now with 99% less goto-spaghetti
- Error state in `git_filebuf`: filebuf write functions no longer
need to be checked for error returns. If any of the writes performed
on a buffer fail, the last call to `git_filebuf_commit` or
`git_filebuf_hash` will fail accordingly and set the appropiate error
message. Baller!
|
|
ae9e29fd
|
2012-03-06T16:14:31
|
|
Migrating diff to new error handling
Ended up migrating a bunch of upstream functions as well
including vector, attr_file, and odb in order to get this
to work right.
|
|
cb8a7961
|
2012-03-07T00:02:55
|
|
error-handling: Repository
This also includes droping `git_buf_lasterror` because it makes no sense
in the new system. Note that in most of the places were it has been
dropped, the code needs cleanup. I.e. GIT_ENOMEM is going away, so
instead it should return a generic `-1` and obviously not throw
anything.
|
|
905919e6
|
2012-02-14T20:44:22
|
|
util: add git__ishex
git__ishex allows to check if a string is a hexadecimal representation.
Signed-off-by: schu <schu-github@schulog.org>
|
|
5e0de328
|
2012-02-13T17:10:24
|
|
Update Copyright header
Signed-off-by: schu <schu-github@schulog.org>
|
|
83bfbdf5
|
2012-01-16T18:00:18
|
|
Remove poor git__removechar function
Going back over this, the git__removechar function was not
needed (only invoked once) and is actually mislabeled. As
implemented, it really only made sense for removing backslash
characters, since two of the "removed" characters in a row
would include the second one -- i.e. it really implements
stripping backslash-escaped strings where a backslash allows
internal whitespace in a word.
|
|
a51cd8e6
|
2012-01-16T16:58:27
|
|
Fix handling of relative paths for attrs
Per issue #533, the handling of relative paths in attribute
and ignore files was not right. Fixed this by pre-joining
the relative path of the attribute/ignore file onto the match
string when a full path match is required.
Unfortunately, fixing this required a bit more code than I
would have liked because I had to juggle things around so that
the fnmatch parser would have sufficient information to prepend
the relative path when it was needed.
|
|
cfbc880d
|
2012-01-16T15:16:44
|
|
Patch cleanup for merge
After reviewing the gitignore support with Vicent, we came up
with a list of minor cleanups to prepare for merge, including:
* checking git_repository_config error returns
* renaming git_ignore_is_ignored and moving to status.h
* fixing next_line skipping to include \r skips
* commenting on where ignores are and are not included
|
|
df743c7d
|
2012-01-09T15:37:19
|
|
Initial implementation of gitignore support
Adds support for .gitignore files to git_status_foreach() and
git_status_file(). This includes refactoring the gitattributes
code to share logic where possible. The GIT_STATUS_IGNORED flag
will now be passed in for files that are ignored (provided they
are not already in the index or the head of repo).
|
|
f2114d0a
|
2012-01-04T22:40:59
|
|
Merge remote-tracking branch 'nulltoken/topix/path_fromurl' into development
Conflicts:
tests-clay/clay.h
tests-clay/clay_main.c
|
|
bd370b14
|
2011-12-30T15:00:14
|
|
Improved gitattributes macro implementation
This updates to implementation of gitattribute macros to be much more
similar to core git (albeit not 100%) and to handle expansion of
macros within macros, etc. It also cleans up the refcounting usage
with macros to be much cleaner.
Also, this adds a new vector function `git_vector_insert_sorted()`
which allows you to maintain a sorted list as you go. In order to
write that function, this changes the function `git__bsearch()` to
take a somewhat different set of parameters, although the core
functionality is still the same.
|
|
73b51450
|
2011-12-28T23:28:50
|
|
Add support for macros and cache flush API.
Add support for git attribute macro definitions. Also, add
support for cache flush API to clear the attribute file content
cache when needed.
Additionally, improved the handling of global and system files,
making common utility functions in fileops and converting config
and attr to both use the common functions.
Adds a bunch more tests and fixed some memory leaks. Note that
adding macros required me to use refcounted attribute assignment
definitions, which complicated, but probably improved memory usage.
|
|
eb8de747
|
2011-12-28T20:24:58
|
|
util: add git__fromhex()
|
|
ee1f0b1a
|
2011-12-16T10:56:43
|
|
Add APIs for git attributes
This adds APIs for querying git attributes. In addition to
the new API in include/git2/attr.h, most of the action is in
src/attr_file.[hc] which contains utilities for dealing with
a single attributes file, and src/attr.[hc] which contains
the implementation of the APIs that merge all applicable
attributes files.
|
|
b028a898
|
2011-11-26T08:31:57
|
|
util: Remove unused macro
|
|
03da4480
|
2011-11-26T08:31:15
|
|
refcount: Fix off-by one error
|
|
9462c471
|
2011-11-25T08:16:26
|
|
repository: Change ownership semantics
The ownership semantics have been changed all over the library to be
consistent. There are no more "borrowed" or duplicated references.
Main changes:
- `git_repository_open2` and `3` have been dropped.
- Added setters and getters to hotswap all the repository owned
objects:
`git_repository_index`
`git_repository_set_index`
`git_repository_odb`
`git_repository_set_odb`
`git_repository_config`
`git_repository_set_config`
`git_repository_workdir`
`git_repository_set_workdir`
Now working directories/index files/ODBs and so on can be
hot-swapped after creating a repository and between operations.
- All these objects now have proper ownership semantics with
refcounting: they all require freeing after they are no longer
needed (the repository always keeps its internal reference).
- Repository open and initialization has been updated to keep in
mind the configuration files. Bare repositories are now always
detected, and a default config file is created on init.
- All the tests affected by these changes have been dropped from the
old test suite and ported to the new one.
|
|
3286c408
|
2011-10-28T14:51:13
|
|
global: Properly use `git__` memory wrappers
Ensure that all memory related functions (malloc, calloc, strdup, free,
etc) are using their respective `git__` wrappers.
|
|
fafd4710
|
2011-09-30T16:08:06
|
|
config: Proper type declarations for 64 bit ints
|
|
ad196c6a
|
2011-09-21T23:17:39
|
|
config: make git_config_[get|set]_long() able to properly deal with 8 bytes wide values
Should fix issue #419.
Signed-off-by: nulltoken <emeric.fermas@gmail.com>
|
|
87d9869f
|
2011-09-19T03:34:49
|
|
Tabify everything
There were quite a few places were spaces were being used instead of
tabs. Try to catch them all. This should hopefully not break anything.
Except for `git blame`. Oh well.
|
|
bb742ede
|
2011-09-19T01:54:32
|
|
Cleanup legal data
1. The license header is technically not valid if it doesn't have a
copyright signature.
2. The COPYING file has been updated with the different licenses used in
the project.
3. The full GPLv2 header in each file annoys me.
|
|
26e74c6a
|
2011-09-08T14:21:17
|
|
Fix some random size_t vs. int conversion warnings
|
|
932669b8
|
2011-08-25T14:22:57
|
|
Drop STRLEN() macros
There is no need in STRLEN macros. Compilers can do this trivial
optimization on its own.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
|