tests/attr


Log

Author Commit Date CI Message
Patrick Steinhardt 2d9ff8f5 2017-07-10T09:36:19 ignore: honor case insensitivity for negative ignores When computing negative ignores, we throw away any rule which does not undo a previous rule to optimize. But on case insensitive file systems, we need to keep in mind that a negative ignore can also undo a previous rule with different case, which we did not yet honor while determining whether a rule undoes a previous one. So in the following example, we fail to unignore the "/Case" directory: /case !/Case Make both paths checking whether a plain- or wildcard-based rule undo a previous rule aware of case-insensitivity. This fixes the described issue.
Patrick Steinhardt b8922fc8 2017-07-07T13:27:27 ignore: keep negative rules containing wildcards Ignore rules allow for reverting a previously ignored rule by prefixing it with an exclamation mark. As such, a negative rule can only override previously ignored files. While computing all ignore patterns, we try to use this fact to optimize away some negative rules which do not override any previous patterns, as they won't change the outcome anyway. In some cases, though, this optimization causes us to get the actual ignores wrong for some files. This may happen whenever the pattern contains a wildcard, as we are unable to reason about whether a pattern overrides a previous pattern in a sane way. This happens for example in the case where a gitignore file contains "*.c" and "!src/*.c", where we wouldn't un-ignore files inside of the "src/" subdirectory. In this case, the first solution coming to mind may be to just strip the "src/" prefix and simply compare the basenames. While that would work here, it would stop working as soon as the basename pattern itself is different, like for example with "*x.c" and "!src/*.c. As such, we settle for the easier fix of just not optimizing away rules that contain a wildcard.
Robert Gay c3b8e8b3 2017-05-14T10:28:05 Fix issue with directory glob ignore in subdirectories
Edward Thomson c52480fd 2017-02-17T13:01:49 `cl_git_exec` -> `cl_git_expect`
Edward Thomson a1dcc830 2017-02-17T12:13:35 tests: provide better pass/failure error messages Provide more detailed messages when conditions pass or fail unexpectedly. In particular, this provides the error messages when a test fails with a different error code than was expected.
Carlos Martín Nieto 1c3018eb 2016-04-18T13:34:18 ignore: fix directory limits when searching for star-star In order to match the star-star, we disable the flag that's looking for a single path element, but that leads to searching for the pattern in the middle of elements in the input string. Mark when we're handing a star-star so we jump over the elements in our attempt to match the part of the pattern that comes after the star-star. While here, tighten up the check so we don't allow invalid rules through.
Antonio Scandurra 0f362716 2016-03-31T17:38:40 Add more tests for path matching with globs and path delimiters
Carlos Martín Nieto d364dc8b 2016-04-01T14:33:42 ignore: don't use realpath to canonicalize path If we're looking for a symlink, realpath will give us the resolved path, which is not what we're after, but a canonicalized version of the path the user asked for.
Edward Thomson 882cc37f 2015-05-13T10:56:55 attr tests: make explicit our dir/file match tests
Edward Thomson 9486d203 2015-05-12T13:07:59 attr test: test a file beneath ignored folder
Edward Thomson 97fb9ac7 2015-05-12T13:54:28 attr: test that a file is not ignored for a folder When a .gitignore specifies some folder "foo/", ensure that a file with the same name "foo" is not ignored.
Edward Thomson adad5181 2015-05-12T13:52:47 attr: regression tests for ignore matching Ensure that when examining a .gitignore in a subdirectory, we do not erroneously apply the paths contained therein to the root of the repository. (Fixed in c02a0e4).
J Wyman 4c09e19a 2015-03-30T14:07:44 Improvements to ignore performance on Windows. Minimizing the number directory and file opens, minimizes the amount of IO thus reducing the overall cost of performing ignore operations.
Mike McQuaid c6bf03b4 2015-03-28T18:37:15 Add failing subdirectory gitignore attr test.
The rugged tests are fragile 4cb7c4a4 2014-09-17T15:08:16 attr: Add an extra test for files under a subfolder
Russell Belfer 1fbeb2f0 2014-09-15T21:59:23 Fix attribute lookup in index for bare repos When using a bare repo with an index, libgit2 attempts to read files from the index. It caches those files based on the path to the file, specifically the path to the directory that contains the file. If there is no working directory, we use `git_path_dirname_r` to get the path to the containing directory. However, for the `.gitattributes` file in the root of the repository, this ends up normalizing the containing path to `"."` instead of the empty string and the lookup the `.gitattributes` data fails. This adds a test of attribute lookups on bare repos and also fixes the problem by simply rewriting `"."` to be `""`.
Russell Belfer 99dfa470 2014-05-01T15:12:12 Some further sandboxing cleanups to tests Trying to find other issues where tests may not clean up quite properly when they are through...
Russell Belfer 0f603132 2014-05-01T14:47:33 Improve handling of fake home directory There are a few tests that set up a fake home directory and a fake GLOBAL search path so that we can test things in global ignore or attribute or config files. This cleans up that code to work more robustly even if there is a test failure. This also fixes some valgrind warnings where scanning search paths for separators could end up doing a little bit of sketchy data access when coming to the end of search list.
Russell Belfer d19b2f9f 2014-05-01T12:46:46 Make ** pattern eat trailing slash This allows "foo/**/*.html" to match "foo/file.html"
Russell Belfer e3a2a04c 2014-04-18T14:29:58 Preload attribute files that may contain macros There was a latent bug where files that use macro definitions could be parsed before the macro definitions were loaded. Because of attribute file caching, preloading files that are going to be used doesn't add a significant amount of overhead, so let's always preload any files that could contain macros before we assemble the actual vector of files to scan for attributes.
Russell Belfer 50e46d60 2014-04-18T10:58:01 Cleanup tests with helper functions
Russell Belfer 823c0e9c 2014-04-17T11:53:13 Fix broken logic for attr cache invalidation The checks to see if files were out of date in the attibute cache was wrong because the cache-breaker data wasn't getting stored correctly. Additionally, when the cache-breaker triggered, the old file data was being leaked.
Russell Belfer 7d490872 2014-04-10T22:31:01 Attribute file cache refactor This is a big refactoring of the attribute file cache to be a bit simpler which in turn makes it easier to enforce a lock around any updates to the cache so that it can be used in a threaded env. Tons of changes to the attributes and ignores code.
Russell Belfer a9528b8f 2014-04-14T15:59:48 Fix core.excludesfile named .gitignore Ignore rules with slashes in them are matched using FNM_PATHNAME and use the path to the .gitignore file from the root of the repository along with the path fragment (including slashes) in the ignore file itself. Unfortunately, the relative path to the .gitignore file was being applied to the global core.excludesfile if that was also named ".gitignore". This fixes that with more precise matching and includes test for ignore rules with leading slashes (which were the primary example of this being broken in the real world). This also backports an improvement to the file context logic from the threadsafe-iterators branch where we don't rely on mutating the key of the attribute file name to generate the context path.
Russell Belfer c8c91433 2014-04-06T10:42:26 More ** tests for pattern rules
Russell Belfer 2b6b85f1 2014-04-04T17:02:12 Add support for ** matches in ignores This is an experimental addition to add ** support to fnmatch pattern matching in libgit2. It needs more testing.
Carlos Martín Nieto d541170c 2014-01-24T11:36:41 index: rename an entry's id to 'id' This was not converted when we converted the rest, so do it now.
Russell Belfer 25e0b157 2013-12-06T15:07:57 Remove converting user error to GIT_EUSER This changes the behavior of callbacks so that the callback error code is not converted into GIT_EUSER and instead we propagate the return value through to the caller. Instead of using the giterr_capture and giterr_restore functions, we now rely on all functions to pass back the return value from a callback. To avoid having a return value with no error message, the user can call the public giterr_set_str or some such function to set an error message. There is a new helper 'giterr_set_callback' that functions can invoke after making a callback which ensures that some error message was set in case the callback did not set one. In places where the sign of the callback return value is meaningful (e.g. positive to skip, negative to abort), only the negative values are returned back to the caller, obviously, since the other values allow for continuing the loop. The hardest parts of this were in the checkout code where positive return values were overloaded as meaningful values for checkout. I fixed this by adding an output parameter to many of the internal checkout functions and removing the overload. This added some code, but it is probably a better implementation. There is some funkiness in the network code where user provided callbacks could be returning a positive or a negative value and we want to rely on that to cancel the loop. There are still a couple places where an user error might get turned into GIT_EUSER there, I think, though none exercised by the tests.
Ben Straub 17820381 2013-11-14T14:05:52 Rename tests-clar to tests