|
79ca2edc
|
2009-03-20T19:51:48
|
|
win32: Add routines to abstract memory-mapped file functions
In particular, the git__mmap() and git__munmap() routines provide
the interface to platform specific memory-mapped file facilities.
We provide implementations for unix and win32, which can be found
in their own sub-directories.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
491442f9
|
2009-03-12T22:10:22
|
|
Factor out test helper methods for creating/deleting loose objects
Signed-off-by: Julio Espinoza-Sokal <julioes@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
1906f236
|
2009-02-26T20:37:20
|
|
Add built-in (Mozilla) SHA1 routines
Paul agreed to the GCC-exception license by email:
|
| From: Paul Kocher <paul@cryptography.com>
| Date: Sun, 15 Mar 2009 11:37:23 -0700
| Subject: Re: Adding Mozilla SHA1 implementation to libgit2
|
| Yes - that's fine.
|
| At 01:56 AM 3/5/2009, Andreas Ericsson wrote:
| > Hi Paul. We spoke earlier about this, if you remember?
| > We'd like to add the GCC-exception to the GPL license
| > for these files.
Signed-off-by: Paul Kocher <paul@cryptography.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
357bf823
|
2009-01-30T22:55:56
|
|
Use install instead of 'cp -f' and 'mkdir -p'.
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3f84b7d3
|
2009-01-30T22:55:55
|
|
Add libgit2.pc to make clean rule.
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
19af3949
|
2009-01-30T22:55:54
|
|
Add support for installing to a libdir other than 'lib'.
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
521b4e69
|
2009-01-30T22:55:53
|
|
Add DESTDIR support.
Signed-off-by: Ingmar Vanhassel <ingmar@exherbo.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
8ed341c5
|
2008-12-31T21:34:03
|
|
Add a build variable to allow supression of -fvisibility
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
0c01d80a
|
2008-12-31T13:38:47
|
|
Run ranlib on libgit2.a after archiving it
Some linkers require ranlib to build a symbol table on the archive
in order to work with it. Most platforms that don't have this
requirement permit ranlib as a noop.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
007e0753
|
2008-12-27T18:58:25
|
|
Add some routines for SHA1 hash computation
[sp: Changed signature for output to use git_oid, and added
a test case to verify an allocated git_hash_ctx can be
reinitialized and reused.]
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
d7fbfe15
|
2008-12-30T12:10:01
|
|
Add pkg-config support.
The libgit2.pc is generated on make install and installed, to allow
using the lib through the pkg-config helper.
Signed-off-by: Steve Frécinaux <code@istique.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
5ddbd5ed
|
2008-12-30T12:10:00
|
|
Add make install and uninstall targets.
It accepts a prefix= parameter (default: /usr/local).
Signed-off-by: Steve Frécinaux <code@istique.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3d3552e8
|
2008-12-18T22:58:10
|
|
Implement git_odb__read_loose()
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
def425bf
|
2008-12-18T08:20:50
|
|
Remove references to src/git/config.h
It was removed in ec250c6e18e56d12714f9010e1b15e5feec5f473.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c18626ee
|
2008-12-18T08:17:05
|
|
Run tests in their own subdirectory
This way tests can run in parallel without stepping on each other's
temporary work files. If a test passes the directory is removed
completely; if a test fails only empty directories are removed.
This permits inspection of the failed test's left behind state.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
17643760
|
2008-11-29T19:20:07
|
|
Use __CHECKER__ to detect when sparse is running
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
80133dad
|
2008-11-29T19:19:31
|
|
Use cgcc in the sparse target
cgcc is the recommended way to run sparse, since it provides
many -Defines suitable to the given gcc platform. For example,
on some Ubuntu/glibc versions, a plain sparse invocation gives
the following warning:
"warning: This machine appears to be neither x86_64 nor i386."
Using "cgcc -no-compile" instead eliminates this warning.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
ec250c6e
|
2008-11-23T22:37:55
|
|
Remove config.h and make fileops an internal API
Since it doesn't make sense to make the disk access stuff
portable *AND* public (that's a job for each application
imo), we can take a shortcut and just support unixy stuff
for now and get away with coding most of it as macros.
Since we go with an internal API for starters and only
provide higher-level API's to the libgit users, we'll be
ok with this approach.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
3e1d42b7
|
2008-11-18T22:17:40
|
|
Add a 'sparse' make target
Given the confusion on git@vger, we'd better not name
this target "check" or (worse) "test", but it's still
useful to have. As "sparse", noone should have problems
understanding what it does.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
4f0adcd0
|
2008-11-18T21:28:55
|
|
Get rid of GIT__PRIVATE macro
Using it in the first place means something's wrong.
This patch replaces it with an internal header which
carries the previously "protected" code instead.
Internal source-files simply include "commit.h" and
they're done. The internal header includes the public
one to make sure we always use the proper prototype.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ab3f234e
|
2008-11-22T15:35:31
|
|
Make using CFLAGS a bit simpler
This patch introduces the $(ALL_CFLAGS) variable, which holds
$(BASIC_CFLAGS) as well as userdefined $(CFLAGS) and then
consistently uses that variable where both were used anyway.
Since we're in the area, we optimize the sparse running a
bit, getting rid of the shell and just letting sparse iterate
over the files.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
21648b45
|
2008-11-22T15:25:59
|
|
Make src/git/config.h a macro in Makefile
This makes it far more convenient to reference as a dependency
for other targets.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ae234862
|
2008-11-18T22:20:15
|
|
Add an embryo of a TLS-aware error handling system
This adds the per-thread global variable git_errno to the
system, which callers can examine to get information about
an error.
Two helper functions are added to reduce LoC-count for the
library code itself.
Also, some exceptions are made for running sparse on GIT_TLS
definitions, since it doesn't grok thread-local variables at
all.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
ff7c7576
|
2008-11-22T13:05:32
|
|
s/COPYING/.HEADER/ for install-headers target
We don't want to prepend the entire license; Only the
file header part of it.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
6013ffa6
|
2008-11-22T15:33:15
|
|
Add $(CONFIG_H) as a build-dependency for sparse
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
a57e9a8c
|
2008-11-18T01:27:29
|
|
Add a fake and phony install-headers target
It actually does what it's supposed to (more or less),
but not very portably and not to the correct directory.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d4043ee9
|
2008-11-18T01:18:52
|
|
Move public headers to src/git
It's arguably smoother to keep them close to the source,
as that's where one's working when modifying them. More
importantly, though, is the ability to use private headers
in the src/ dir that simply include "git/$samename.h" to
get to the public API at the same time.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b3a2f90e
|
2008-11-03T18:00:49
|
|
Enable warnings by default and fix warning in oid.c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b923f2f9
|
2008-11-03T17:00:54
|
|
Fix Makefile to correctly handle 'make -j4 test'
If we have more than one test build running we cannot use the same
file for each test case; instead we need to use a per-test path so
there aren't any collisions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
15bffce9
|
2008-11-01T18:14:22
|
|
Create a basic test suite for the library and test oid functions
This is a horribly simple test suite that makes it fairly easy to
put together some basic function level unit tests on the library.
Its patterned somewhat after the test suite in git.git, but also
after the "Check" test library.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
16a67770
|
2008-11-01T16:53:06
|
|
Create a micro abstraction around the POSIX file APIs
This way we can start to write IO code to read and write files in the
Git object database, but provide a hook to inject native Win32 APIs
instead so libgit2 can be ported to run natively on that platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
d1ea30c3
|
2008-11-01T15:42:23
|
|
Move include files to include/git/, drop git_ prefix from file names
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
4f9339df
|
2008-10-31T15:10:51
|
|
Hide non-exported symbols when linking the library
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
06160502
|
2008-10-31T12:30:28
|
|
Take the first stab at defining revision traversal
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
13ce9f1b
|
2008-10-31T12:28:49
|
|
Fix Makefile targets to correctly depend on *.h files
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
b39843f3
|
2008-10-31T11:44:00
|
|
Use wildcard to avoid listing out all source files by hand
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
7335ffc3
|
2008-10-31T11:37:58
|
|
Begin a description of our naming and coding conventions
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
c15648cb
|
2008-10-31T09:57:29
|
|
Initial draft of libgit2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|