kmx git

Commit	Date	Message
35079f50	2017-04-21T07:31:56	odb: add option to turn off hash verification Verifying hashsums of objects we are reading from the ODB may be costly as we have to perform an additional hashsum calculation on the object. Especially when reading large objects, the penalty can be as high as 35%, as can be seen when executing the equivalent of `git cat-file` with and without verification enabled. To mitigate for this, we add a global option for libgit2 which enables the developer to turn off the verification, e.g. when he can be reasonably sure that the objects on disk won't be corrupted.
28a0741f	2017-04-10T09:30:08	odb: verify object hashes The upstream git.git project verifies objects when looking them up from disk. This avoids scenarios where objects have somehow become corrupt on disk, e.g. due to hardware failures or bit flips. While our mantra is usually to follow upstream behavior, we do not do so in this case, as we never check hashes of objects we have just read from disk. To fix this, we create a new error class `GIT_EMISMATCH` which denotes that we have looked up an object with a hashsum mismatch. `odb_read_1` will then, after having read the object from its backend, hash the object and compare the resulting hash to the expected hash. If hashes do not match, it will return an error. This obviously introduces another computation of checksums and could potentially impact performance. Note though that we usually perform I/O operations directly before doing this computation, and as such the actual overhead should be drowned out by I/O. Running our test suite seems to confirm this guess. On a Linux system with best-of-five timings, we had 21.592s with the check enabled and 21.590s with the ckeck disabled. Note though that our test suite mostly contains very small blobs only. It is expected that repositories with bigger blobs may notice an increased hit by this check. In addition to a new test, we also had to change the odb::backend::nonrefreshing test suite, which now triggers a hashsum mismatch when looking up the commit "deadbeef...". This is expected, as the fake backend allocated inside of the test will return an empty object for the OID "deadbeef...", which will obviously not hash back to "deadbeef..." again. We can simply adjust the hash to equal the hash of the empty object here to fix this test.
6fd6c678	2017-03-22T20:29:22	Merge pull request #4030 from libgit2/ethomson/fsync fsync all the things
52d03f37	2017-03-03T13:26:29	git_commit_create: freshen tree objects in commit Freshen the tree object that a commit points to during commit time.
1c04a96b	2017-02-28T12:29:29	Honor `core.fsyncObjectFiles`
e10144ae	2016-03-04T01:18:30	odb: improved not found error messages When looking up an abbreviated oid, show the actual (abbreviated) oid the caller passed instead of a full (but ambiguously truncated) oid.
77b339f7	2015-05-12T13:06:33	odb: make the writestream's size a git_off_t Restricting files to size_t is a silly limitation. The loose backend writes to a file directly, so there is no issue in using 63 bits for the size. We still assume that the header is going to fit in 64 bytes, which does mean quite a bit smaller files due to the run-length encoding, but it's still a much larger size than you would want Git to handle.
85d54812	2013-08-28T16:44:04	Create public filter object and use it This creates include/sys/filter.h with a basic definition of a git_filter and then converts the internal code to use it. There are related internal objects (git_filter_list) that we will want to publish at some point, but this is a first step.
78606263	2013-04-15T00:05:44	Add callback to git_objects_table This adds create and free callback to the git_objects_table so that more of the creation and destruction of objects can be table driven instead of using switch statements. This also makes the semantics of certain object creation functions consistent so that we can make better use of function pointers. This also fixes a theoretical error case where an object allocation fails and we end up storing NULL into the cache.
8842c75f	2013-04-03T22:30:07	What has science done.
5df18424	2013-04-01T19:38:23	lol this worked first try wtf
359fc2d2	2013-01-08T17:07:25	update copyrights
f56f8585	2012-11-19T22:23:16	indexer: use the packfile streaming API The new API allows us to read the object bit by bit from the packfile, instead of needing it all at once in the packfile. This also allows us to hash the object as it comes in from the network instead of having to try to read it all and failing repeatedly for larger objects. This is only the first step, but it already shows huge improvements when dealing with objects over a few megabytes in size. It reduces the memory needs in some cases, but delta objects still need to be completely in memory and the old inefficent method is still used for that.
c6ac28fd	2012-09-10T12:24:05	Reorg internal odb read header and object lookup Often `git_odb_read_header` will "fail" and have to read the entire object into memory instead of just the header. When this happens, the object is loaded and then disposed of immediately, which makes it difficult to efficiently use the header information to decide if the object should be loaded (since attempting to do so will often result in loading the object twice). This commit takes the existing code and reorganizes it to have two new functions: - `git_odb__read_header_or_object` which acts just like the old read header function except that it returns the object, too, if it was forced to load the whole thing. It then becomes the callers responsibility to free the `git_odb_object`. - `git_object__from_odb_object` which was extracted from the old `git_object_lookup` and creates a subclass of `git_object` from an existing `git_odb_object` (separating the ODB lookup from the `git_object` creation). This allows you to use the first header reading function efficiently without instantiating the `git_odb_object` twice. There is no net change to the behavior of any of the existing functions, but this allows internal code to tap into the ODB lookup and object creation to be more efficient.
60b9d3fc	2012-09-05T15:00:40	Implement filters for status/diff blobs This adds support to diff and status for running filters (a la crlf) on blobs in the workdir before computing SHAs and before generating text diffs. This ended up being a bit more code change than I had thought since I had to reorganize some of the diff logic to minimize peak memory use when filtering blobs in a diff. This also adds a cap on the maximum size of data that will be loaded to diff. I set it at 512Mb which should match core git. Right now it is a #define in src/diff.h but it could be moved into the public API if desired.
904b67e6	2012-05-18T01:48:50	errors: Rename error codes
e172cf08	2012-05-18T01:21:06	errors: Rename the generic return codes
282283ac	2012-05-04T16:46:46	Fix valgrind issues There are three changes here: - correctly propogate error code from failed object lookups - make zlib inflate use our allocators - add OID to notfound error in ODB lookups
e1de726c	2012-03-12T22:55:40	Migrate ODB files to new error handling This migrates odb.c, odb_loose.c, odb_pack.c and pack.c to the new style of error handling. Also got the unix and win32 versions of map.c. There are some minor changes to other files but no others were completely converted. This also contains an update to filebuf so that a zeroed out filebuf will not think that the fd (== 0) is actually open (and inadvertently call close() on fd 0 if cleaned up). Lastly, this was built and tested on win32 and contains a bunch of fixes for the win32 build which was pretty broken.
5e0de328	2012-02-13T17:10:24	Update Copyright header Signed-off-by: schu <schu-github@schulog.org>
f19e3ca2	2012-02-10T20:16:42	odb: Proper symlink hashing
18e5b854	2012-02-10T19:47:02	odb: Add internal `git_odb__hashfd`
9462c471	2011-11-25T08:16:26	repository: Change ownership semantics The ownership semantics have been changed all over the library to be consistent. There are no more "borrowed" or duplicated references. Main changes: - `git_repository_open2` and `3` have been dropped. - Added setters and getters to hotswap all the repository owned objects: `git_repository_index` `git_repository_set_index` `git_repository_odb` `git_repository_set_odb` `git_repository_config` `git_repository_set_config` `git_repository_workdir` `git_repository_set_workdir` Now working directories/index files/ODBs and so on can be hot-swapped after creating a repository and between operations. - All these objects now have proper ownership semantics with refcounting: they all require freeing after they are no longer needed (the repository always keeps its internal reference). - Repository open and initialization has been updated to keep in mind the configuration files. Bare repositories are now always detected, and a default config file is created on init. - All the tests affected by these changes have been dropped from the old test suite and ported to the new one.
01ad7b3a	2011-09-06T15:48:45	*: correct and codify various file permissions The following files now have 0444 permissions: - loose objects - pack indexes - pack files - packs downloaded by fetch - packs downloaded by the HTTP transport And the following files now have 0666 permissions: - config files - repository indexes - reflogs - refs This brings libgit2 more in line with Git. Note that git_filebuf_commit() and git_filebuf_commit_at() have both gained a new mode parameter. The latter change fixes an important issue where filebufs created with GIT_FILEBUF_TEMPORARY received 0600 permissions (due to mkstemp(3) usage). Now we chmod() the file before renaming it into place. Tests have been added to confirm that new commit, tag, and tree objects are created with the right permissions. I don't have access to Windows, so for now I've guarded the tests with "#ifndef GIT_WIN32".
ce8cd006	2011-09-07T15:32:44	fileops/repository: create (most) directories with 0777 permissions To further match how Git behaves, this change makes most of the directories libgit2 creates in a git repo have a file mode of 0777. Specifically: - Intermediate directories created with git_futils_mkpath2file() have 0777 permissions. This affects odb_loose, reflog, and refs. - The top level folder for bare repos is created with 0777 permissions. - The top level folder for non-bare repos is created with 0755 permissions. - /objects/info/, /objects/pack/, /refs/heads/, and /refs/tags/ are created with 0777 permissions. Additionally, the following changes have been made: - fileops functions that create intermediate directories have grown a new dirmode parameter. The only exception to this is filebuf's lock_file(), which unconditionally creates intermediate directories with 0777 permissions when GIT_FILEBUF_FORCE is set. - The test runner now sets the umask to 0 before running any tests. This ensurses all file mode checks are consistent across systems. - t09-tree.c now does a directory permissions check. I've avoided adding this check to other tests that might reuse existing directories from the prefabricated test repos. Because they're checked into the repo, they have 0755 permissions. - Other assorted directories created by tests have 0777 permissions.
87d9869f	2011-09-19T03:34:49	Tabify everything There were quite a few places were spaces were being used instead of tabs. Try to catch them all. This should hopefully not break anything. Except for `git blame`. Oh well.
bb742ede	2011-09-19T01:54:32	Cleanup legal data 1. The license header is technically not valid if it doesn't have a copyright signature. 2. The COPYING file has been updated with the different licenses used in the project. 3. The full GPLv2 header in each file annoys me.
c85e08b1	2011-08-16T13:05:05	odb: Do not pass around a header when hashing
72a3fe42	2011-03-18T19:38:49	I broke your bindings Hey. Apologies in advance -- I broke your bindings. This is a major commit that includes a long-overdue redesign of the whole object-database structure. This is expected to be the last major external API redesign of the library until the first non-alpha release. Please get your bindings up to date with these changes. They will be included in the next minor release. Sorry again! Major features include: - Real caching and refcounting on parsed objects - Real caching and refcounting on objects read from the ODB - Streaming writes & reads from the ODB - Single-method writes for all object types - The external API is now partially thread-safe The speed increases are significant in all aspects, specially when reading an object several times from the ODB (revwalking) and when writing big objects to the ODB. Here's a full changelog for the external API: blob.h ------ - Remove `git_blob_new` - Remove `git_blob_set_rawcontent` - Remove `git_blob_set_rawcontent_fromfile` - Rename `git_blob_writefile` -> `git_blob_create_fromfile` - Change `git_blob_create_fromfile`: The `path` argument is now relative to the repository's working dir - Add `git_blob_create_frombuffer` commit.h -------- - Remove `git_commit_new` - Remove `git_commit_add_parent` - Remove `git_commit_set_message` - Remove `git_commit_set_committer` - Remove `git_commit_set_author` - Remove `git_commit_set_tree` - Add `git_commit_create` - Add `git_commit_create_v` - Add `git_commit_create_o` - Add `git_commit_create_ov` tag.h ----- - Remove `git_tag_new` - Remove `git_tag_set_target` - Remove `git_tag_set_name` - Remove `git_tag_set_tagger` - Remove `git_tag_set_message` - Add `git_tag_create` - Add `git_tag_create_o` tree.h ------ - Change `git_tree_entry_2object`: New signature is `(git_object *object_out, git_repository repo, git_tree_entry entry)` - Remove `git_tree_new` - Remove `git_tree_add_entry` - Remove `git_tree_remove_entry_byindex` - Remove `git_tree_remove_entry_byname` - Remove `git_tree_clearentries` - Remove `git_tree_entry_set_id` - Remove `git_tree_entry_set_name` - Remove `git_tree_entry_set_attributes` object.h ------------ - Remove `git_object_new - Remove `git_object_write` - Change `git_object_close`: This method is now mandatory. Not closing an object causes a memory leak. odb.h ----- - Remove type `git_rawobj` - Remove `git_rawobj_close` - Rename `git_rawobj_hash` -> `git_odb_hash` - Change `git_odb_hash`: New signature is `(git_oid id, const void data, size_t len, git_otype type)` - Add type `git_odb_object` - Add `git_odb_object_close` - Change `git_odb_read`: New signature is `(git_odb_object out, git_odb db, const git_oid id)` - Change `git_odb_read_header`: New signature is `(size_t len_p, git_otype type_p, git_odb db, const git_oid id)` - Remove `git_odb_write` - Add `git_odb_open_wstream` - Add `git_odb_open_rstream` odb_backend.h ------------- - Change type `git_odb_backend`: New internal signatures are as follows int ( read)(void *, size_t , git_otype , struct git_odb_backend , const git_oid ) int ( read_header)(size_t , git_otype , struct git_odb_backend , const git_oid ) int (* writestream)(struct git_odb_stream *, struct git_odb_backend , size_t, git_otype) int (* readstream)( struct git_odb_stream *, struct git_odb_backend , const git_oid *) - Add type `git_odb_stream` - Add enum `git_odb_streammode` Signed-off-by: Vicent Marti <tanoku@gmail.com>
becff042	2011-02-07T08:09:11	Fix compilation in MSVC The git_odb_backend_* symbols were being redefined as external. Signed-off-by: Vicent Marti <tanoku@gmail.com>
44908fe7	2010-12-06T23:03:16	Change the library include file Libgit2 is now officially include as #include "<git2.h>" or indidividual files may be included as #include <git2/index.h> Signed-off-by: Vicent Marti <tanoku@gmail.com>
d12299fe	2010-12-03T22:22:10	Change include structure for the project The maze with include dependencies has been fixed. There is now a global include: #include <git.h> The git_odb_backend API has been exposed. Signed-off-by: Vicent Marti <tanoku@gmail.com>
7d7cd885	2010-12-03T18:01:30	Decouple storage from ODB logic Comes with two default backends: loose object and packfiles. Signed-off-by: Vicent Marti <tanoku@gmail.com>
89217d8f	2010-04-28T20:20:00	Add functions to open a '*.pack' file and perform some basic validation Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
a7c60cfc	2009-01-03T02:41:26	Add basic support to read pack-*.idx v1 and v2 files The index data is mapped into memory and then scanned using a binary search algorithm to locate the matching entry for the supplied git_oid. The standard fanout hash trick is applied to reduce the search space by 8 iterations. Since the v1 and v2 file formats differ in their search function, due to the different layouts used for the object records, we use two different search implementations and a virtual function pointer to jump to the correct version of code for the current pack index. The single function jump per-pack should be faster then computing a branch point inside the inner loop of a common binary search. To improve concurrency during read operations the pack lock is only held while verifying the index is actually open, or while opening the index for the first time. This permits multiple concurrent readers to scan through the same index. If an invalid index file is opened we close it and mark the git_pack's invalid bit to true. The git_pack structure is kept around in its parent git_packlist, but the invalid bit will cause all future readers to skip over the pack entirely. Pruning the invalid entries is relatively unimportant because they shouldn't be very common, a $GIT_DIRECTORY/objects/pack directory tends to only have valid pack files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

35079f50

2017-04-21T07:31:56

odb: add option to turn off hash verification Verifying hashsums of objects we are reading from the ODB may be costly as we have to perform an additional hashsum calculation on the object. Especially when reading large objects, the penalty can be as high as 35%, as can be seen when executing the equivalent of `git cat-file` with and without verification enabled. To mitigate for this, we add a global option for libgit2 which enables the developer to turn off the verification, e.g. when he can be reasonably sure that the objects on disk won't be corrupted.

28a0741f

2017-04-10T09:30:08

odb: verify object hashes The upstream git.git project verifies objects when looking them up from disk. This avoids scenarios where objects have somehow become corrupt on disk, e.g. due to hardware failures or bit flips. While our mantra is usually to follow upstream behavior, we do not do so in this case, as we never check hashes of objects we have just read from disk. To fix this, we create a new error class `GIT_EMISMATCH` which denotes that we have looked up an object with a hashsum mismatch. `odb_read_1` will then, after having read the object from its backend, hash the object and compare the resulting hash to the expected hash. If hashes do not match, it will return an error. This obviously introduces another computation of checksums and could potentially impact performance. Note though that we usually perform I/O operations directly before doing this computation, and as such the actual overhead should be drowned out by I/O. Running our test suite seems to confirm this guess. On a Linux system with best-of-five timings, we had 21.592s with the check enabled and 21.590s with the ckeck disabled. Note though that our test suite mostly contains very small blobs only. It is expected that repositories with bigger blobs may notice an increased hit by this check. In addition to a new test, we also had to change the odb::backend::nonrefreshing test suite, which now triggers a hashsum mismatch when looking up the commit "deadbeef...". This is expected, as the fake backend allocated inside of the test will return an empty object for the OID "deadbeef...", which will obviously not hash back to "deadbeef..." again. We can simply adjust the hash to equal the hash of the empty object here to fix this test.

6fd6c678

2017-03-22T20:29:22

Merge pull request #4030 from libgit2/ethomson/fsync fsync all the things

52d03f37

2017-03-03T13:26:29

git_commit_create: freshen tree objects in commit Freshen the tree object that a commit points to during commit time.

1c04a96b

2017-02-28T12:29:29

Honor `core.fsyncObjectFiles`

e10144ae

2016-03-04T01:18:30

odb: improved not found error messages When looking up an abbreviated oid, show the actual (abbreviated) oid the caller passed instead of a full (but ambiguously truncated) oid.

77b339f7

2015-05-12T13:06:33

odb: make the writestream's size a git_off_t Restricting files to size_t is a silly limitation. The loose backend writes to a file directly, so there is no issue in using 63 bits for the size. We still assume that the header is going to fit in 64 bytes, which does mean quite a bit smaller files due to the run-length encoding, but it's still a much larger size than you would want Git to handle.

85d54812

2013-08-28T16:44:04

Create public filter object and use it This creates include/sys/filter.h with a basic definition of a git_filter and then converts the internal code to use it. There are related internal objects (git_filter_list) that we will want to publish at some point, but this is a first step.

78606263

2013-04-15T00:05:44

Add callback to git_objects_table This adds create and free callback to the git_objects_table so that more of the creation and destruction of objects can be table driven instead of using switch statements. This also makes the semantics of certain object creation functions consistent so that we can make better use of function pointers. This also fixes a theoretical error case where an object allocation fails and we end up storing NULL into the cache.

8842c75f

2013-04-03T22:30:07

What has science done.

5df18424

2013-04-01T19:38:23

lol this worked first try wtf

359fc2d2

2013-01-08T17:07:25

update copyrights

f56f8585

2012-11-19T22:23:16

indexer: use the packfile streaming API The new API allows us to read the object bit by bit from the packfile, instead of needing it all at once in the packfile. This also allows us to hash the object as it comes in from the network instead of having to try to read it all and failing repeatedly for larger objects. This is only the first step, but it already shows huge improvements when dealing with objects over a few megabytes in size. It reduces the memory needs in some cases, but delta objects still need to be completely in memory and the old inefficent method is still used for that.

c6ac28fd

2012-09-10T12:24:05

Reorg internal odb read header and object lookup Often `git_odb_read_header` will "fail" and have to read the entire object into memory instead of just the header. When this happens, the object is loaded and then disposed of immediately, which makes it difficult to efficiently use the header information to decide if the object should be loaded (since attempting to do so will often result in loading the object twice). This commit takes the existing code and reorganizes it to have two new functions: - `git_odb__read_header_or_object` which acts just like the old read header function except that it returns the object, too, if it was forced to load the whole thing. It then becomes the callers responsibility to free the `git_odb_object`. - `git_object__from_odb_object` which was extracted from the old `git_object_lookup` and creates a subclass of `git_object` from an existing `git_odb_object` (separating the ODB lookup from the `git_object` creation). This allows you to use the first header reading function efficiently without instantiating the `git_odb_object` twice. There is no net change to the behavior of any of the existing functions, but this allows internal code to tap into the ODB lookup and object creation to be more efficient.

60b9d3fc

2012-09-05T15:00:40

Implement filters for status/diff blobs This adds support to diff and status for running filters (a la crlf) on blobs in the workdir before computing SHAs and before generating text diffs. This ended up being a bit more code change than I had thought since I had to reorganize some of the diff logic to minimize peak memory use when filtering blobs in a diff. This also adds a cap on the maximum size of data that will be loaded to diff. I set it at 512Mb which should match core git. Right now it is a #define in src/diff.h but it could be moved into the public API if desired.

904b67e6

2012-05-18T01:48:50

errors: Rename error codes

e172cf08

2012-05-18T01:21:06

errors: Rename the generic return codes

282283ac

2012-05-04T16:46:46

Fix valgrind issues There are three changes here: - correctly propogate error code from failed object lookups - make zlib inflate use our allocators - add OID to notfound error in ODB lookups

e1de726c

2012-03-12T22:55:40

Migrate ODB files to new error handling This migrates odb.c, odb_loose.c, odb_pack.c and pack.c to the new style of error handling. Also got the unix and win32 versions of map.c. There are some minor changes to other files but no others were completely converted. This also contains an update to filebuf so that a zeroed out filebuf will not think that the fd (== 0) is actually open (and inadvertently call close() on fd 0 if cleaned up). Lastly, this was built and tested on win32 and contains a bunch of fixes for the win32 build which was pretty broken.

5e0de328

2012-02-13T17:10:24

Update Copyright header Signed-off-by: schu <schu-github@schulog.org>

f19e3ca2

2012-02-10T20:16:42

odb: Proper symlink hashing

18e5b854

2012-02-10T19:47:02

odb: Add internal `git_odb__hashfd`

9462c471

2011-11-25T08:16:26

repository: Change ownership semantics The ownership semantics have been changed all over the library to be consistent. There are no more "borrowed" or duplicated references. Main changes: - `git_repository_open2` and `3` have been dropped. - Added setters and getters to hotswap all the repository owned objects: `git_repository_index` `git_repository_set_index` `git_repository_odb` `git_repository_set_odb` `git_repository_config` `git_repository_set_config` `git_repository_workdir` `git_repository_set_workdir` Now working directories/index files/ODBs and so on can be hot-swapped after creating a repository and between operations. - All these objects now have proper ownership semantics with refcounting: they all require freeing after they are no longer needed (the repository always keeps its internal reference). - Repository open and initialization has been updated to keep in mind the configuration files. Bare repositories are now always detected, and a default config file is created on init. - All the tests affected by these changes have been dropped from the old test suite and ported to the new one.

01ad7b3a

2011-09-06T15:48:45

*: correct and codify various file permissions The following files now have 0444 permissions: - loose objects - pack indexes - pack files - packs downloaded by fetch - packs downloaded by the HTTP transport And the following files now have 0666 permissions: - config files - repository indexes - reflogs - refs This brings libgit2 more in line with Git. Note that git_filebuf_commit() and git_filebuf_commit_at() have both gained a new mode parameter. The latter change fixes an important issue where filebufs created with GIT_FILEBUF_TEMPORARY received 0600 permissions (due to mkstemp(3) usage). Now we chmod() the file before renaming it into place. Tests have been added to confirm that new commit, tag, and tree objects are created with the right permissions. I don't have access to Windows, so for now I've guarded the tests with "#ifndef GIT_WIN32".

ce8cd006

2011-09-07T15:32:44

fileops/repository: create (most) directories with 0777 permissions To further match how Git behaves, this change makes most of the directories libgit2 creates in a git repo have a file mode of 0777. Specifically: - Intermediate directories created with git_futils_mkpath2file() have 0777 permissions. This affects odb_loose, reflog, and refs. - The top level folder for bare repos is created with 0777 permissions. - The top level folder for non-bare repos is created with 0755 permissions. - /objects/info/, /objects/pack/, /refs/heads/, and /refs/tags/ are created with 0777 permissions. Additionally, the following changes have been made: - fileops functions that create intermediate directories have grown a new dirmode parameter. The only exception to this is filebuf's lock_file(), which unconditionally creates intermediate directories with 0777 permissions when GIT_FILEBUF_FORCE is set. - The test runner now sets the umask to 0 before running any tests. This ensurses all file mode checks are consistent across systems. - t09-tree.c now does a directory permissions check. I've avoided adding this check to other tests that might reuse existing directories from the prefabricated test repos. Because they're checked into the repo, they have 0755 permissions. - Other assorted directories created by tests have 0777 permissions.

87d9869f

2011-09-19T03:34:49

Tabify everything There were quite a few places were spaces were being used instead of tabs. Try to catch them all. This should hopefully not break anything. Except for `git blame`. Oh well.

bb742ede

2011-09-19T01:54:32

Cleanup legal data 1. The license header is technically not valid if it doesn't have a copyright signature. 2. The COPYING file has been updated with the different licenses used in the project. 3. The full GPLv2 header in each file annoys me.

c85e08b1

2011-08-16T13:05:05

odb: Do not pass around a header when hashing

72a3fe42

2011-03-18T19:38:49

I broke your bindings Hey. Apologies in advance -- I broke your bindings. This is a major commit that includes a long-overdue redesign of the whole object-database structure. This is expected to be the last major external API redesign of the library until the first non-alpha release. Please get your bindings up to date with these changes. They will be included in the next minor release. Sorry again! Major features include: - Real caching and refcounting on parsed objects - Real caching and refcounting on objects read from the ODB - Streaming writes & reads from the ODB - Single-method writes for all object types - The external API is now partially thread-safe The speed increases are significant in all aspects, specially when reading an object several times from the ODB (revwalking) and when writing big objects to the ODB. Here's a full changelog for the external API: blob.h ------ - Remove `git_blob_new` - Remove `git_blob_set_rawcontent` - Remove `git_blob_set_rawcontent_fromfile` - Rename `git_blob_writefile` -> `git_blob_create_fromfile` - Change `git_blob_create_fromfile`: The `path` argument is now relative to the repository's working dir - Add `git_blob_create_frombuffer` commit.h -------- - Remove `git_commit_new` - Remove `git_commit_add_parent` - Remove `git_commit_set_message` - Remove `git_commit_set_committer` - Remove `git_commit_set_author` - Remove `git_commit_set_tree` - Add `git_commit_create` - Add `git_commit_create_v` - Add `git_commit_create_o` - Add `git_commit_create_ov` tag.h ----- - Remove `git_tag_new` - Remove `git_tag_set_target` - Remove `git_tag_set_name` - Remove `git_tag_set_tagger` - Remove `git_tag_set_message` - Add `git_tag_create` - Add `git_tag_create_o` tree.h ------ - Change `git_tree_entry_2object`: New signature is `(git_object **object_out, git_repository *repo, git_tree_entry *entry)` - Remove `git_tree_new` - Remove `git_tree_add_entry` - Remove `git_tree_remove_entry_byindex` - Remove `git_tree_remove_entry_byname` - Remove `git_tree_clearentries` - Remove `git_tree_entry_set_id` - Remove `git_tree_entry_set_name` - Remove `git_tree_entry_set_attributes` object.h ------------ - Remove `git_object_new - Remove `git_object_write` - Change `git_object_close`: This method is now *mandatory*. Not closing an object causes a memory leak. odb.h ----- - Remove type `git_rawobj` - Remove `git_rawobj_close` - Rename `git_rawobj_hash` -> `git_odb_hash` - Change `git_odb_hash`: New signature is `(git_oid *id, const void *data, size_t len, git_otype type)` - Add type `git_odb_object` - Add `git_odb_object_close` - Change `git_odb_read`: New signature is `(git_odb_object **out, git_odb *db, const git_oid *id)` - Change `git_odb_read_header`: New signature is `(size_t *len_p, git_otype *type_p, git_odb *db, const git_oid *id)` - Remove `git_odb_write` - Add `git_odb_open_wstream` - Add `git_odb_open_rstream` odb_backend.h ------------- - Change type `git_odb_backend`: New internal signatures are as follows int (* read)(void **, size_t *, git_otype *, struct git_odb_backend *, const git_oid *) int (* read_header)(size_t *, git_otype *, struct git_odb_backend *, const git_oid *) int (* writestream)(struct git_odb_stream **, struct git_odb_backend *, size_t, git_otype) int (* readstream)( struct git_odb_stream **, struct git_odb_backend *, const git_oid *) - Add type `git_odb_stream` - Add enum `git_odb_streammode` Signed-off-by: Vicent Marti <tanoku@gmail.com>

becff042

2011-02-07T08:09:11

Fix compilation in MSVC The git_odb_backend_* symbols were being redefined as external. Signed-off-by: Vicent Marti <tanoku@gmail.com>

44908fe7

2010-12-06T23:03:16

Change the library include file Libgit2 is now officially include as #include "<git2.h>" or indidividual files may be included as #include <git2/index.h> Signed-off-by: Vicent Marti <tanoku@gmail.com>

d12299fe

2010-12-03T22:22:10

Change include structure for the project The maze with include dependencies has been fixed. There is now a global include: #include <git.h> The git_odb_backend API has been exposed. Signed-off-by: Vicent Marti <tanoku@gmail.com>

7d7cd885

2010-12-03T18:01:30

Decouple storage from ODB logic Comes with two default backends: loose object and packfiles. Signed-off-by: Vicent Marti <tanoku@gmail.com>

89217d8f

2010-04-28T20:20:00

Add functions to open a '*.pack' file and perform some basic validation Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>

a7c60cfc

2009-01-03T02:41:26

Add basic support to read pack-*.idx v1 and v2 files The index data is mapped into memory and then scanned using a binary search algorithm to locate the matching entry for the supplied git_oid. The standard fanout hash trick is applied to reduce the search space by 8 iterations. Since the v1 and v2 file formats differ in their search function, due to the different layouts used for the object records, we use two different search implementations and a virtual function pointer to jump to the correct version of code for the current pack index. The single function jump per-pack should be faster then computing a branch point inside the inner loop of a common binary search. To improve concurrency during read operations the pack lock is only held while verifying the index is actually open, or while opening the index for the first time. This permits multiple concurrent readers to scan through the same index. If an invalid index file is opened we close it and mark the git_pack's invalid bit to true. The git_pack structure is kept around in its parent git_packlist, but the invalid bit will cause all future readers to skip over the pack entirely. Pruning the invalid entries is relatively unimportant because they shouldn't be very common, a $GIT_DIRECTORY/objects/pack directory tends to only have valid pack files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

thodg/libgit2/src/odb.h

src/odb.h

Log