src/transports/ssh.c


Log

Author Commit Date CI Message
Patrick Steinhardt 2ce2a48f 2017-05-02T13:37:15 transports: ssh: clean up after libssh2 on exit After calling `libssh2_init`, we need to clean up after the library by executing `libssh2_exit` as soon as we exit. Register a shutdown handler to do so which simply calls `libssh2_exit`. This fixes several memory leaks.
Patrick Steinhardt 8c027351 2017-05-02T13:35:09 transports: ssh: report failure initializing libssh2 We unconditionally return success when initializing libssh2, regardless of whether `libgssh2_init` signals success or an error. Fix this by checking its return code.
Edward Thomson 909d5494 2016-12-29T12:25:15 giterr_set: consistent error messages Error messages should be sentence fragments, and therefore: 1. Should not begin with a capital letter, 2. Should not conclude with punctuation, and 3. Should not end a sentence and begin a new one
Edward Thomson b7809b84 2016-03-08T13:38:55 Merge pull request #3555 from cbargren/ssh-git-protocols Support for ssh+git and git+ssh protocols
Carlos Martín Nieto 22f3d3aa 2016-03-03T22:26:31 ssh: initialize libssh2 We should have been doing this, but it initializes itself upon first use, which works as long as nobody's doing concurrent network operations. Initialize it on our init to make sure it's not getting initialized concurrently.
Chris Bargren 4df17045 2015-12-28T07:43:24 Removing #define for SSH_PREFIX_COUNT and using ARRAY_SIZE instead Also moving var declarations to top of blocks to support bad old compilers
Michał Górny 02fdc2db 2015-12-26T17:17:05 ssh_stream_read(): fix possible *bytes_read < 0 branch Fix the possibility of returning successfully from ssh_stream_read() with *bytes_read < 0. This would occur if stdout channel read resulted in 0, and stderr channel read failed afterwards.
Chris Bargren ed21fd74 2015-12-22T10:38:31 Handle git+ssh:// and ssh+git:// protocols support
Max Leske 241414ee 2015-08-14T15:42:59 added a single line of additional error reporting from libssh2 when failing to retrieve the list of authentication methods
Simon ac728c24 2015-08-03T07:38:07 Handle ssh:// and git:// urls containing a '~' character. For such a path '/~/...' the leading '/' is stripped so the server will get a path starting with '~' and correctly handle it.
Edward Thomson 79698030 2015-06-29T22:51:18 git_cert: child types use proper base type
Carlos Martín Nieto 81be2f46 2015-06-09T16:01:29 ssh: move NULL check to the free function Let `ssh_stream_free()` take a NULL stream, as free functions should, and remove the check from the connection setup. The connection setup would not need the check anyhow, as we always have a stream by the time we reach this code.
Marius Ungureanu d71e3b25 2015-06-02T10:23:54 Change error when running out of ssh agent keys
Michał Górny 2629fc87 2015-05-24T22:33:55 cred: Check for null values when getting key from memory The public key field is optional and as such can take NULL. Account for that and do not call strlen() on NULL values. Also assert() for non-NULL values of username & private key.
David Calavera 7a8b8503 2015-03-17T09:19:15 Add support to read ssh keys from memory.
Carlos Martín Nieto 1396c381 2015-05-18T16:04:55 errors: add GIT_EEOF to indicate early EOF This can be used by tools to show mesages about failing to communicate with the server. The error message in this case will often contain the server's error message, as far as it managed to send anything.
Carlos Martín Nieto e3435673 2015-05-18T15:51:55 ssh: read from stderr if stdout is empty When we fail to read from stdout, it's typically because the URL was wrong and the server process has sent some output over its stderr output. Read that output and set the error message to whatever we read from it.
Leo Yang 142e5379 2015-03-17T12:49:33 Add a custom param to git_smart_subtransport_definition The smart transport has already take the payload param. For the sub transport a payload param is useful for the implementer.
Carlos Martín Nieto 4fd4341f 2014-11-02T10:52:03 ssh: use socket_stream to perform the connection Having an ssh stream would require extra work for stream capabilities we don't need anywhere else (oob auth and command execution) so for now let's move away from the gitno connection to use socket_stream. We can introduce an ssh stream interface if and as we need it.
Edward Thomson bc42479a 2014-10-13T15:43:03 Cleanup memory leak in ssh transport
Edward Thomson 369b0217 2014-10-13T13:34:15 Clean up various compiler warnings
Sven Strickroth e6e834a1 2014-09-18T12:23:07 Provide host name to certificate_check_cb Signed-off-by: Sven Strickroth <email@cs-ware.de>
Carlos Martín Nieto 1e0aa105 2014-09-16T03:22:09 ssh: expose both hashes The user may have the data hashed as MD5 or SHA-1, so we should provide both types for consumption.
Carlos Martín Nieto 286369a8 2014-09-16T02:27:16 ssh: provide our own types for host key lengths Instead of using the libssh2 defines, provide our own, which eases usage as we do not need to check whether libgit2 was built with libssh2 or not.
Carlos Martín Nieto 0782fc43 2014-09-16T01:47:30 net: use only structs to pass information about cert Instead of spreading the data in function arguments, some of which aren't used for ssh and having a struct only for ssh, use a struct for both, using a common parent to pass to the callback.
Carlos Martín Nieto 0fef3899 2014-09-16T01:25:53 Merge remote-tracking branch 'upstream/master' into cmn/host-cert-info
Carlos Martín Nieto 23ca0ad5 2014-08-29T21:25:13 Bring certificate check back to the normal return code Returning 0 lets the certificate check succeed. An error code is bubbled up to the user.
Carlos Martín Nieto 2f5864c5 2014-08-29T21:15:36 ssh: do ssh cert info before asking for credentials We know the host's key as soon as we connect, so we should perform the check as soon as we can, before we bother with the user's credentials.
Carlos Martín Nieto 17491f6e 2014-08-29T17:18:23 transport: always call the certificate check callback We should let the user decide whether to cancel the connection or not regardless of whether our checks have decided that the certificate is fine. We provide our own assessment to the callback to let the user fall back to our checks if they so desire.
Carlos Martín Nieto ec1ce458 2014-08-10T17:06:53 http: send the DER-encoded cert to the callback Instead of the parsed data, we can ask OpenSSL to give us the DER-encoded version of the certificate, which the user can then parse and validate.
Carlos Martín Nieto 9b940586 2014-07-04T12:45:43 Provide a callback for certificate validation If the certificate validation fails (or always in the case of ssh), let the user decide whether to allow the connection. The data structure passed to the user is the native certificate information from the underlying implementation, namely OpenSSL or WinHTTP.
Carlos Martín Nieto 2dc399a8 2014-09-04T16:46:14 ssh: store error message immediately after a failed agent call When the call to the agent fails, we must retrieve the error message just after the function call, as other calls may overwrite it. As the agent authentication is the only one which has a teardown and there does not seem to be a way to get the error message from a stored error number, this tries to introduce some small changes to store the error from the agent. Clearing the error at the beginning of the loop lets us know whether the agent has already set the libgit2 error message and we should skip it, or if we should set it.
Carlos Martín Nieto 6a0d2b43 2014-08-27T15:09:07 Merge remote-tracking branch 'upstream/master' into cmn/ssh-retry
Jacques Germishuys 959a93e7 2014-07-13T11:50:49 Silence unused variables warnings
Vicent Marti 8baeb8a4 2014-07-16T13:03:34 ssh: Fix unused warning
Carlos Martín Nieto d4256ed5 2014-07-04T10:00:39 ssh: provide a factory function for setting ssh paths git allows you to set which paths to use for the git server programs when connecting over ssh; and we want to provide something similar. We do this by providing a factory function which can be set as the remote's transport callback which will set the given paths upon creation.
Jacques Germishuys ae241ae1 2014-07-03T20:20:00 Include libssh2.h before git2.h (transport.h)
Carlos Martín Nieto 0963716b 2014-07-02T12:49:51 ssh: libssh2_channel_write() behaves like send() When the stream writing function was written, it assume that libssh2_channel_write() would always write all of the data to the wire. This is only true for the first 32k of data, which it tries to fit into one ssh packet. Since it can perform short writes, call it in a loop like we do for send(), advancing the buffer offset.
Carlos Martín Nieto ccb85c8f 2014-06-25T16:27:43 ssh: make sure to ask for a username and use the same one In order to know which authentication methods are supported/allowed by the ssh server, we need to send a NONE auth request, which needs a username associated with it. Most ssh server implementations do not allow switching the username between authentication attempts, which means we cannot use a dummy username and then switch. There are two ways around this. The first is to use a different connection, which an earlier commit implements, but this increases how long it takes to get set up, and without knowing the right username, we cannot guarantee that the list we get in response is the right one. The second is what's implemented here: if there is no username specified in the url, ask for it first. We can then ask for the list of auth methods and use the user's credentials in the same connection.
Carlos Martín Nieto d7f962f4 2014-06-16T19:30:06 ssh: request credentials again on authentication failure Instead of completely giving up on the first failure, ask for credentials as long as we fail to authenticate.
Carlos Martín Nieto b529c5f9 2014-06-12T17:19:00 ssh: propagate the error code from the auth callback We need to be able to get a GIT_EUSER back through the outermost call.
Carlos Martín Nieto 22618906 2014-06-12T16:09:54 ssh: detect authentication methods Before calling the credentials callback, ask the sever which authentication methods it supports and report that to the user, instead of simply reporting everything that the transport supports. In case of an error, we do fall back to listing all of them.
Carlos Martín Nieto bc0a6198 2014-04-19T15:52:58 transports: allow the creds callback to say it doesn't exist Allow the credentials callback to return GIT_PASSTHROUGH to make the transports code behave as though none was set. This should make it easier for bindings to behave closer to the C code when there is no credentials callback set at their level.
Jacques Germishuys 8ec0a552 2014-04-18T00:49:07 Make git_cred_ssh_custom_new() naming more consistent
Jacques Germishuys 478408c0 2014-04-17T23:03:44 Introduce git_cred_ssh_interactive_new() This allows for keyboard-interactive based SSH authentication
Carlos Martín Nieto bd270b70 2014-04-18T17:08:10 cred: tighten username rules The ssh-specific credentials allow the username to be missing. The idea being that the ssh transport will then use the username provided in the url, if it's available. There are two main issues with this. The credential callback already knows what username was provided by the url and needs to figure out whether it wants to ask the user for it or it can reuse it, so passing NULL as the username means the credential callback is suspicious. The username provided in the url is not in fact used by the transport. The only time it even considers it is for the user/pass credential, which asserts the existence of a username in its constructor. For the ssh-specific ones, it passes in the username stored in the credential, which is NULL. The libssh2 macro we use runs strlen() against this value (which is no different from what we would be doing ourselves), so we then crash. As the documentation doesn't suggest to leave out the username, assert the need for a username in the code, which removes this buggy behavior and removes implicit state. git_cred_has_username() becomes a blacklist of credential types that do not have a username. The only one at the moment is the 'default' one, which is meant to call up some Microsoft magic.
Miha 300f4412 2014-02-25T11:56:11 - BUGFIX #2133 (@fourplusone) in smart_protocol.c - added MSVC cmake definitions to disable warnings - general.c is rewritten so it is ansi-c compatible and compiles ok on microsoft windows - some MSVC reported warning fixes
Alessandro Ghedini ee7040fd 2013-11-20T14:11:44 ssh: add support for ssh-agent authentication
Ben Straub ac72051a 2013-11-04T19:09:30 Fix ssh.c compile
Ben Straub c227c173 2013-11-04T11:42:14 Use http_parser_parse_url to parse urls
Ben Straub 048f837b 2013-10-31T13:30:22 Prevent another segfault from bad URL
Carlos Martín Nieto 70a8c78f 2013-10-23T12:08:54 Rename the ssh credentials The names from libssh2 are somewhat obtuse for us. We can simplify the usual key/passphrase credential's name, as well as make clearer what the custom signature function is.
Edward Thomson 2648dc1a 2013-10-21T11:03:31 Allowed credential types should be a bitfield
Etienne Samson eec4dcc3 2013-08-09T13:14:19 Whitespace.
Etienne Samson b622aabe 2013-08-09T13:14:06 Add a wrapper to provide the libssh2 error message
Isaac Kearse b345026b 2013-09-10T05:16:52 Test for repo before removing leading colon
Isaac Kearse fbabe855 2013-09-08T14:11:08 Trim leading colon from ssh repository path
Russell Belfer c87bf86c 2013-08-14T10:58:02 Commit 7affc2f7 removed var initialization That commit accidentally removed the initialization of the "start" variable giving undefined results for the host extraction from the url input.
Carlos Martín Nieto 7affc2f7 2013-08-11T23:30:47 Include username in each credential type Key-based authentication also needs an username, so include it in each one. Also stop assuming a default username of "git" in the ssh transport which has no business making such a decision.
Russell Belfer c2de6b1a 2013-07-10T10:21:24 Bring SSH error reporting up to base standards The SSH error checking and reporting could still be further improved by using the libssh2 native methods to get error info, but at least this ensures that all error codes are checked and translated into libgit2 error messages.
Russell Belfer 68bc49a1 2013-07-10T09:20:46 Merge branch 'ssh-cred-fix' of tiennou/libgit2 Conflicts: src/transports/ssh.c
Etienne Samson 08bf80fa 2013-07-10T10:29:32 Tab indent.
Etienne Samson 367c1903 2013-07-10T10:29:09 Add some missing error messages.
Russell Belfer a3c062db 2013-07-09T09:58:33 Make SSH APIs present even without SSH support The SSH APIs will just return an error code and state that the library was built without SSH support if they are called in that case.
Etienne Samson f6bd0863 2013-07-03T22:02:44 Fix a probable leak.
Etienne Samson 219f318c 2013-07-03T22:02:29 Fix a crash if git_remote_set_cred_acquire_cb wasn't called before connecting. Fixes #1700.
Brad Morgan 84ac625d 2013-05-15T12:51:40 Added GITERR_CHECK_ALLOC
Brad Morgan b54ed3ef 2013-05-15T12:41:16 Added error check
Brad Morgan 22011b33 2013-05-15T12:38:40 Cleanup
Brad Morgan ce6d50b9 2013-05-09T17:37:42 Changed to use libssh2_channel_exec
Brad Morgan 05f58131 2013-05-09T17:36:27 Renaming
Brad Morgan 574b86b7 2013-05-07T13:53:23 Fixed compilation issues when libssh2 is missing
Brad Morgan c36565c0 2013-05-07T13:43:10 Added SSH public key authentication
Brad Morgan 7621519f 2013-05-05T14:46:28 Cleanup
Brad Morgan 67a7136c 2013-05-05T14:24:47 Renaming
Brad Morgan 3eed595e 2013-05-05T14:24:05 Refactoring
Brad Morgan d9766959 2013-05-05T14:05:03 Cleanup
Brad Morgan c0cef9e0 2013-05-05T13:58:18 Added username and password auth for ssh
Brad Morgan 7261d983 2013-05-05T13:36:11 Added support for ssh:// urls
Brad Morgan 120b0122 2013-05-05T09:03:49 Refactoring
Brad Morgan 22595b84 2013-05-05T08:43:58 Added ssh stream cleanup
Brad Morgan 58ba0a4e 2013-05-05T08:34:56 Cleanup
Brad Morgan f7158cd7 2013-05-03T16:31:16 Push working over ssh
Brad Morgan d04c3840 2013-05-03T14:53:23 Adding ssh transport logic
Brad Morgan 8ae55d94 2013-05-03T10:53:59 Renaming
Brad Morgan 297758dc 2013-05-03T10:37:33 Added ssh transport file