|
f2400a9c
|
2020-07-13T20:56:08
|
|
config_entries: Avoid excessive map operations
When appending config entries, we currently always first get the
currently existing map entry and then afterwards update the map to
contain the current config value. In the common scenario where keys
aren't being overridden, this is the best we can do. But in case a key
gets set multiple times, then we'll also perform these two map
operations. In extreme cases, hashing the map keys will thus start to
dominate performance.
Let's optimize the pattern by using a separately allocated map entry.
Currently, we always put the current list entry into the map and update
it to get any overridden multivar. As these list entries are also used
to iterate config entries, we cannot update them in-place in the map and
are thus forced to always set the map to contain the new entry. But with
a separately allocated map entry, we can now create one once per config
key and insert it into the map. Whenever appending a new config value
with the same key, we can now just update the map entry in-place instead
of having to replace the map entry completely.
This reduces calls to the hashing function by half and trades the
improved runtime for one more allocation per unique config key. Given
that the refactoring arguably improves code readability by splitting
concerns of the `config_entry_list` type and not having to track it in
two different structures, this alone would already be reason enough to
take the trade.
Given a pathological case of a gitconfig with 100.000 repeated keys and
a section of length 10.000 characters, this reduces runtime by half from
approximately 14 seconds to 7 seconds as expected.
|
|
|
4218403e
|
2020-06-05T10:49:09
|
|
cmake: use target-specific compile definitions
We set up some compile definitions as part of our src/CMakeLists.txt.
While the definitions are global, we really only need them as part of
the git2internal target which compiles all the objects. Let's thus use
`target_compile_definitions` instead of `add_definitions`.
|
|
|
53911edd
|
2020-06-05T10:24:30
|
|
cmake: use git2internal target to populate sources
Modern CMake is usually target-driven in that a target is first defined
and then the likes of `target_sources`, `target_include_directories`
etc. are used to further populate the target. We still use old-style
CMake, where we first set up a set of variables and then populate the
target in a single call.
Let's migrate to modern CMake usage by starting to populate the sources
of our git2internal target piece-by-piece. While this is a small step,
it allows us to convert to target-based build instructions
piece-by-piece.
|
|
|
19eb1e4b
|
2020-06-05T10:07:33
|
|
cmake: specify project version
We currently do not set up a project version within CMake, meaning that
it can't be use by other projects including libgit2 as a sub-project and
also not by other tools like IDEs.
This commit changes this to always set up a project version, but instead
of extracting it from the "version.h" header we now set it up directly.
This is mostly to avoid mis-use of the previous `LIBGIT2_VERSION`
variables, as we should now always use the `libgit2_VERSION` ones that
are set up by CMake if one provides the "VERSION" keyword to the
`project()` call. While this is one more moving target we need to adjust
on releases, this commit also adjusts our release script to verify that
the project version was incremented as expected.
|
|
325375e3
|
2020-07-09T23:12:58
|
|
Merge pull request #5568 from lhchavez/ubsan
Make the tests run cleanly under UndefinedBehaviorSanitizer
|
|
|
2ffa426e
|
2020-07-09T23:02:05
|
|
Merge pull request #5567 from lhchavez/msan
Make the tests pass cleanly with MemorySanitizer
|
|
dc1deb3b
|
2020-07-01T15:41:38
|
|
Use __GNUC__ macro in the resource script
Fix the default LIBGIT2_FILENAME for GNU windres
|
|
|
71000441
|
2020-06-16T18:58:07
|
|
Review: Rename the stringize macro
|
|
|
5c40456b
|
2020-06-16T13:19:02
|
|
Enable building git2.rc resource script with GCC
|
|
3a197ea7
|
2020-06-27T12:33:32
|
|
Make the tests pass cleanly with MemorySanitizer
This change:
* Initializes a few variables that were being read before being
initialized.
* Includes https://github.com/madler/zlib/pull/393. As such,
it only works reliably with `-DUSE_BUNDLED_ZLIB=ON`.
|
|
|
d0656ac8
|
2020-06-27T12:15:26
|
|
Make the tests run cleanly under UndefinedBehaviorSanitizer
This change makes the tests run cleanly under
`-fsanitize=undefined,nullability` and comprises of:
* Avoids some arithmetic with NULL pointers (which UBSan does not like).
* Avoids an overflow in a shift, due to an uint8_t being implicitly
converted to a signed 32-bit signed integer after being shifted by a
32-bit signed integer.
* Avoids a unaligned read in libgit2.
* Ignores unaligned reads in the SHA1 library, since it only happens on
Intel processors, where it is _still_ undefined behavior, but the
semantics are moderately well-understood.
Of notable omission is `-fsanitize=integer`, since there are lots of
warnings in zlib and the SHA1 library which probably don't make sense to
fix and I could not figure out how to silence easily. libgit2 itself
also has ~100s of warnings which are mostly innocuous (e.g. use of enum
constants that only fit on an `uint32_t`, but there is no way to do that
in a simple fashion because the data type chosen for enumerated types is
implementation-defined), and investigating whether there are worrying
warnings would need reducing the noise significantly.
|
|
|
6256d023
|
2020-06-15T14:34:29
|
|
diff_print: adjust code to match current coding style
|
|
|
490d0c9c
|
2020-06-15T14:26:13
|
|
diff_print: return out-of-memory situation when printing binary
We currently don't check for out-of-memory situations on exiting
`format_binary` and, as a result, may return a partially filled buffer.
Fix this by checking the buffer via `git_buf_oom`.
|
|
|
bea5fd9f
|
2020-06-15T13:26:18
|
|
diff_print: do not call abort(3P)
Calling abort(3P) in a library is rather rude and shouldn't happen, as
we effectively prohibit any corrective actions made by the application
linking to it. We thus shouldn't call it at all, but instead use our new
`GIT_ASSERT` macros.
Remove the call to abort(3P) in case a diff delta has an unexpected type
to fix this.
|
|
|
0cf1f444
|
2020-06-15T13:19:44
|
|
diff_print: handle errors when printing to file
When printing the diff to a `FILE *` handle, we neither check the return
value of fputc(3P) nor the one of fwrite(3P). As a result, we'll
silently return successful even if we didn't print anything at all.
Futhermore, the arguments to fwrite(3P) are reversed: we have one item
of length `content_len`, and not `content_len` items of one byte.
Fix both issues by checking return values as well as reversing the
arguments to fwrite(3P).
|
|
|
74520b91
|
2020-06-13T19:38:11
|
|
Merge pull request #5552 from libgit2/pks/small-fixes
Random code cleanups and fixes
|
|
|
c6184f0c
|
2020-06-08T21:07:36
|
|
tree-wide: do not compile deprecated functions with hard deprecation
When compiling libgit2 with -DDEPRECATE_HARD, we add a preprocessor
definition `GIT_DEPRECATE_HARD` which causes the "git2/deprecated.h"
header to be empty. As a result, no function declarations are made
available to callers, but the implementations are still available to
link against. This has the problem that function declarations also
aren't visible to the implementations, meaning that the symbol's
visibility will not be set up correctly. As a result, the resulting
library may not expose those deprecated symbols at all on some platforms
and thus cause linking errors.
Fix the issue by conditionally compiling deprecated functions, only.
While it becomes impossible to link against such a library in case one
uses deprecated functions, distributors of libgit2 aren't expected to
pass -DDEPRECATE_HARD anyway. Instead, users of libgit2 should manually
define GIT_DEPRECATE_HARD to hide deprecated functions. Using "real"
hard deprecation still makes sense in the context of CI to test we don't
use deprecated symbols ourselves and in case a dependant uses libgit2 in
a vendored way and knows it won't ever use any of the deprecated symbols
anyway.
|
|
|
6e1efcd6
|
2020-06-08T12:46:04
|
|
tree-wide: add missing header includes
We're missing some header includes leading to missing function
prototypes. While we currently don't warn about these, we should have
their respective headers included in order to detect the case where a
function signature change results in an incompatibility.
|
|
|
a6c9e0b3
|
2020-06-08T12:40:47
|
|
tree-wide: mark local functions as static
We've accumulated quite some functions which are never used outside of
their respective code unit, but which are lacking the `static` keyword.
Add it to reduce their linkage scope and allow the compiler to optimize
better.
|
|
|
03c4f86c
|
2020-06-08T12:42:59
|
|
cmake: enable warnings for missing function declarations
Over time, we have accumulated quite a lot of functions with missing
prototypes, missing `static` keywords or which were completely unused.
It's easy to miss these mistakes, but luckily GCC and Clang both have
the `-Wmissing-declarations` warning. Enabling this will cause them to
emit warnings for every not-static function that doesn't have a previous
declaration. This is a very sane thing to enable, and with the preceding
commits all these new warnings have been fixed.
So let's always enable this warning so we won't introduce new instances
of them.
|
|
|
fd1f0940
|
2020-06-08T12:42:26
|
|
refs: add missing function declaration
The function `git_reference__is_note` is not declared anywhere. Let's
add the declaration to avoid having non-static functions without
declaration.
|
|
|
7c499b54
|
2020-06-08T12:39:09
|
|
tree-wide: remove unused functions
We have some functions which aren't used anywhere. Let's remove them to
get rid of unneeded baggage.
|
|
|
46637b5e
|
2020-06-08T14:47:01
|
|
checkout: remove unused code for deferred removals
With commit 05f690122 (checkout: remove blocking dir when FORCEd,
2015-03-31), the last case was removde that actually queued a deferred
removal. This is now more than five years in the past and nobody
complained, so we can rest quite assured that the deferred removal is
not really needed at all.
Let's remove all related code to simplify the already complicated
checkout logic.
|
|
|
45901d3e
|
2020-06-08T12:57:16
|
|
revparse: remove superfluous tab character
|
|
|
c146374c
|
2020-06-08T12:54:26
|
|
revparse: detect out-of-memory cases when parsing curly brace contents
When extracting curly braces (e.g. the "upstream" part in
"HEAD@{upstream}"), we put the curly braces' contents into a `git_buf`
structure, but don't check the return value of `git_buf_putc`. So when
we run out-of-memory, we'll use a partially filled buffer without
noticing.
Let's fix this issue by checking `git_buf_putc`'s return value.
|
|
|
53a8f463
|
2020-06-03T07:40:59
|
|
Merge pull request #5536 from libgit2/ethomson/http
httpclient: support googlesource
|
|
|
6de8aa7f
|
2020-06-02T12:21:22
|
|
Merge pull request #5532 from joshtriplett/pack-default-path
git_packbuilder_write: Allow setting path to NULL to use the default path
|
|
|
22f9a0fc
|
2020-06-02T12:12:41
|
|
Merge pull request #5531 from joshtriplett/mempack-threads
mempack: Use threads when building the pack
|
|
|
04c7bdb4
|
2020-06-01T22:44:14
|
|
httpclient: clear the read_buf on new requests
The httpclient implementation keeps a `read_buf` that holds the data
in the body of the response after the headers have been written. We
store that data for subsequent calls to `git_http_client_read_body`. If
we want to stop reading body data and send another request, we need to
clear that cached data.
Clear the cached body data on new requests, just like we read any
outstanding data from the socket.
|
|
|
aa8b2c0f
|
2020-06-01T23:53:55
|
|
httpclient: don't read more than the client wants
When `git_http_client_read_body` is invoked, it provides the size of the
buffer that can be read into. This will be set as the parser context's
`output_size` member. Use this as an upper limit on our reads, and
ensure that we do not read more than the client requests.
|
|
|
51eff5a5
|
2020-05-29T13:13:19
|
|
strarray: we should `dispose` instead of `free`
We _dispose_ the contents of objects; we _free_ objects (and their
contents). Update `git_strarray_free` to be `git_strarray_dispose`.
`git_strarray_free` remains as a deprecated proxy function.
|
|
|
a9746b30
|
2020-05-29T11:21:55
|
|
strarray: move to its own file
|
|
|
570f0340
|
2020-06-01T19:10:38
|
|
httpclient: read_body should return 0 at EOF
When users call `git_http_client_read_body`, it should return 0 at the
end of a message. When the `on_message_complete` callback is called,
this will set `client->state` to `DONE`. In our read loop, we look for
this condition and exit.
Without this, when there is no data left except the end of message chunk
(`0\r\n`) in the http stream, we would block by reading the three bytes
off the stream but not making progress in any `on_body` callbacks.
Listening to the `on_message_complete` callback allows us to stop trying
to read from the socket when we've read the end of message chunk.
|
|
|
17641f1f
|
2020-06-01T15:05:51
|
|
Merge pull request #5526 from libgit2/ethomson/poolinit
git_pool_init: allow the function to fail
|
|
|
0f35efeb
|
2020-05-23T10:15:51
|
|
git_pool_init: handle failure cases
Propagate failures caused by pool initialization errors.
|
|
|
1bbdf15d
|
2020-06-01T13:57:12
|
|
Merge pull request #5527 from libgit2/ethomson/config_unreadable
Handle unreadable configuration files
|
|
d1409f48
|
2020-05-06T19:57:07
|
|
config: ignore unreadable configuration files
Modified `config_file_open()` so it returns 0 if the config file is
not readable, which happens on global config files under macOS
sandboxing (note that for some reason `access(F_OK)` DOES work with
sandboxing, but it is lying). Without this read check sandboxed
applications on macOS can not open any repository, because
`config_file_read()` will return GIT_ERROR when it cannot read the
global /Users/username/.gitconfig file, and the upper layers will
just completely abort on GIT_ERROR when attempting to load the
global config file, so no repositories can be opened.
|
|
8c96d56d
|
2020-05-26T04:53:09
|
|
index: write v4: bugfix: prefix path with strip_len, not same_len
According to index-format.txt of git, the path of an entry is prefixed
with N, where N indicates the length of bytes to be stripped.
|
|
5278a006
|
2020-05-23T16:07:54
|
|
git_packbuilder_write: Allow setting path to NULL to use the default path
If given a NULL path, write to the object path of the repository.
Add tests for the new behavior.
|
|
|
0bc091dd
|
2020-05-23T15:35:38
|
|
git_packbuilder_write: Unify cleanup path
Clean up and return via a single label, to avoid duplicate error
handling before each return, and to make it easier to extend the set of
cleanups needed.
|
|
|
30285a3c
|
2020-05-23T15:04:19
|
|
mempack: Use threads when building the pack
The mempack ODB backend creates a packbuilder internally to write out a
pack; call git_packbuilder_set_threads on that packbuilder, to use
threads for packing if available.
|
|
|
27cb4e0e
|
2020-05-23T11:02:07
|
|
Merge pull request #5522 from pks-t/pks/openssl-cert-memleak
OpenSSL certificate memory leak
|
|
|
abfdb8a6
|
2020-05-23T10:15:37
|
|
git_pool_init: return an int
Let `git_pool_init` return an int so that it could fail.
|
|
|
e4bdba56
|
2020-05-23T09:57:22
|
|
Merge pull request #5515 from pks-t/pks/flaky-checkout-test
tests: checkout: fix flaky test due to mtime race
|
|
|
3b7b4d27
|
2020-05-23T09:40:55
|
|
Merge pull request #5523 from libgit2/pks/cmake-sort-reproducible-builds
cmake: Sort source files for reproducible builds
|
|
|
3f201f75
|
2020-05-16T13:48:04
|
|
checkout: fix file being treated as unmodified due to racy index
When trying to determine whether a file changed, we try to avoid heavy
operations by fist taking a look at the index, seeing whether the index
entry is modified already. This doesn't seem to cut it, though, as we
currently have the racy checkout::index::can_disable_pathspec_match test
case: sometimes the files get restored to their original contents,
sometimes they aren't.
The issue is caused by a racy index [1]: in case we modify a file, add
it to the index and then modify it again in-place without changing its
file, then we may end up with a modified file that has the same stat(3P)
info as we've currently got it in its corresponding index entry. The
mitigation for this is to treat files with the same mtime as the index
are treated as racily modified. We already have this logic in place for
the index, but not when doing a checkout.
Fix the issue by only consulting the index entry in case it has an older
mtime as the index. Previously, the following script reliably had at
least 20 failures, while now there is no failure to be observed anymore:
```bash
j=0
for i in $(seq 100)
do
if ! ./libgit2_clar -scheckout::index::can_disable_pathspec_match >/dev/null
then
j=$(($j + 1))
fi
done
echo "Failures: $j"
```
[1]: https://git-scm.com/docs/racy-git
|
|
|
b85eefb4
|
2020-05-15T19:52:40
|
|
cmake: Sort source files for reproducible builds
We currently use `FILE(GLOB ...)` in most places to find source and
header files. This is problematic in that the order of files returned
depends on the operating system's directory iteration order and may thus
not be deterministic. As a result, we link object files in unspecified
order, which may cause the linker to emit different code across runs.
Fix this issue by sorting all code used as input to the libgit2 library
to improve the reliability of reproducible builds.
|
|
|
b43a9e66
|
2020-05-15T17:46:24
|
|
streams: openssl: fix memleak due to us not free'ing certs
When creating a `git_cert` from the OpenSSL X509 certificate of a given
stream, we do not call `X509_free()` on the certificate, leading to a
memory leak as soon as the certificate is requested e.g. by the
certificate check callback.
Fix the issue by properly calling `X509_free()`.
|
|
|
a2eca682
|
2020-05-12T21:35:07
|
|
futils: fix order of declared parameters for `git_futils_fake_symlink`
While the function `git_futils_fake_symlink` is declared with arguments
`new, old`, the implementation uses the reverse order `old, new`. Let's
fix the ordering issues to be `new, old` for both, which matches what
symlink(3P) has. While at it, we also rename these parameters: `old` and
`new` doesn't really make a lot of sense in the context of symlinks,
which is why this commit renames them to be called `target` and `path`.
|
|
|
cbae1c21
|
2020-04-01T22:12:07
|
|
assert: allow non-int returning functions to assert
Include GIT_ASSERT_WITH_RETVAL and GIT_ASSERT_ARG_WITH_RETVAL so that
functions that do not return int (or more precisely, where `-1` would
not be an error code) can assert.
This allows functions that return, eg, NULL on an error code to do that
by passing the return value (in this example, `NULL`) as a second
parameter to the GIT_ASSERT_WITH_RETVAL functions.
|
|
|
a95096ba
|
2020-01-12T10:31:07
|
|
assert: optionally fall-back to assert(3)
Fall back to the system assert(3) in debug builds, which may aide
in debugging.
"Safe" assertions can be enabled in debug builds by setting
GIT_ASSERT_HARD=0. Similarly, hard assertions can be enabled in
release builds by setting GIT_ASSERT_HARD to nonzero.
|
|
|
abe2efe1
|
2019-12-09T12:37:34
|
|
Introduce GIT_ASSERT macros
Provide macros to replace usages of `assert`. A true `assert` is
punishing as a library. Instead we should do our best to not crash.
GIT_ASSERT_ARG(x) will now assert that the given argument complies to
some format and sets an error message and returns `-1` if it does not.
GIT_ASSERT(x) is for internal usage, and available as an internal
consistency check. It will set an error message and return `-1` in the
event of failure.
|
|
56c95cf6
|
2020-05-10T21:43:38
|
|
Fix uninitialized stack memory and NULL ptr dereference in stash_to_index
Caught by static analysis.
|
|
d62e44cb
|
2019-06-03T18:35:08
|
|
checkout: Fix removing untracked files by path in subdirectories
The checkout code didn't iterate into a subdir if it didn't match the
pathspec, but since the pathspec might match files in the subdir we
should recurse into it (In contrast to gitignore handling).
Fixes #5089
|
|
|
63de2128
|
2020-02-02T20:20:19
|
|
checkout: filter pathspecs for _all_ checkout types
We were previously applying the pathspec filter for the baseline
iterator during checkout, as well as the target tree. This was an
oversight; in fact, we should apply the pathspec filter to _all_
checkout targets, not just trees.
Add a helper function to set the iterator pathspecs from the given
checkout pathspecs, and call it everywhere.
|
|
|
898caead
|
2020-05-10T19:03:10
|
|
Merge pull request #5431 from libgit2/ethomson/hexdump
git__hexdump: better mimic `hexdump -C`
|
|
9830ab3d
|
2020-01-29T02:00:04
|
|
blame: add option to ignore whitespace changes
|
|
|
e9b0cfc0
|
2020-04-05T13:24:13
|
|
Merge pull request #5485 from libgit2/ethomson/sysdir_unused
sysdir: remove unused git_sysdir_get_str
|
|
|
b6f18db9
|
2020-04-05T11:16:29
|
|
sysdir: remove unused git_sysdir_get_str
|
|
ce2ab78f
|
2020-04-04T16:35:33
|
|
Fix typo causing removal of symbol 'git_worktree_prune_init_options'
Commit 0b5ba0d replaced this function with an "option_init"
equivallent, but misspelled the replacement function. As a result, this
symbol has been missing from libgit2.so ever since.
|
|
|
ad341eb7
|
2020-04-04T13:40:14
|
|
Merge pull request #5425 from lhchavez/fix-get-delta-base
pack: Improve error handling for get_delta_base()
|
|
|
966db47d
|
2020-04-04T13:21:02
|
|
Merge pull request #5477 from pks-t/pks/rename-detection-negative-caches
merge: cache negative cache results for similarity metrics
|
|
|
4d4c8e0a
|
2020-04-02T07:34:55
|
|
Re-adding the "delta offset is zero" error case
|
|
|
dfd7fcc4
|
2020-04-02T13:26:13
|
|
Merge pull request #5388 from bk2204/repo-format-v1
Handle repository format v1
|
|
|
b8eec0b2
|
2020-04-01T22:22:38
|
|
Merge pull request #5461 from pks-t/pks/refdb-fs-unused-header
refdb_fs: remove unused header file
|
|
|
5d37128d
|
2020-03-01T10:34:15
|
|
git__hexdump: better mimic `hexdump -C`
|
|
|
ba59a4a2
|
2020-04-01T12:34:16
|
|
Making get_delta_base() conform to the general error-handling pattern
This makes get_delta_base() return the error code as the return value
and the delta base as an out-parameter.
|
|
|
f3273725
|
2020-02-25T20:58:09
|
|
pack: Improve error handling for get_delta_base()
This change moves the responsibility of setting the error upon failures
of get_delta_base() to get_delta_base() instead of its callers. That
way, the caller chan always check if the return value is negative and
mark the whole operation as an error instead of using garbage values,
which can lead to crashes if the .pack files are malformed.
|
|
|
4dfcc50f
|
2020-04-01T15:16:18
|
|
merge: cache negative cache results for similarity metrics
When computing renames, we cache the hash signatures for each of the
potentially conflicting entries so that we do not need to repeatedly
read the file and can at least halfway efficiently determine whether two
files are similar enough to be deemed a rename. In order to make the
hash signatures meaningful, we require at least four lines of data to be
present, resulting in at least four different hashes that can be
compared. Files that are deemed too small are not cached at all and
will thus be repeatedly re-hashed, which is usually not a huge issue.
The issue with above heuristic is in case a file does _not_ have at
least four lines, where a line is anything separated by a consecutive
run of "\n" or "\0" characters. For example "a\nb" is two lines, but
"a\0\0b" is also just two lines. Taken to the extreme, a file that has
megabytes of consecutive space- or NUL-only may also be deemed as too
small and thus not get cached. As a result, we will repeatedly load its
blob, calculate its hash signature just to finally throw it away as we
notice it's not of any value. When you've got a comparitively big file
that you compare against a big set of potentially renamed files, then
the cost simply expodes.
The issue can be trivially fixed by introducing negative cache entries.
Whenever we determine that a given blob does not have a meaningful
representation via a hash signature, we store this negative cache marker
and will from then on not hash it again, but also ignore it as a
potential rename target. This should help the "normal" case already
where you have a lot of small files as rename candidates, but in the
above scenario it's savings are extraordinarily high.
To verify we do not hit the issue anymore with described solution, this
commit adds a test that uses the exact same setup described above with
one 50 megabyte blob of '\0' characters and 1000 other files that get
renamed. Without the negative cache:
$ time ./libgit2_clar -smerge::trees::renames::cache_recomputation >/dev/null
real 11m48.377s
user 11m11.576s
sys 0m35.187s
And with the negative cache:
$ time ./libgit2_clar -smerge::trees::renames::cache_recomputation >/dev/null
real 0m1.972s
user 0m1.851s
sys 0m0.118s
So this represents a ~350-fold performance improvement, but it obviously
depends on how many files you have and how big the blob is. The test
number were chosen in a way that one will immediately notice as soon as
the bug resurfaces.
|
|
|
5f47cb48
|
2020-03-26T14:16:41
|
|
patch: correctly handle mode changes for renames
When generating a patch for a renamed file whose mode bits have changed
in addition to the rename, then we currently fail to parse the generated
patch. Furthermore, when generating a diff we output mode bits after the
similarity metric, which is different to how upstream git handles it.
Fix both issues by adding another state transition that allows
similarity indices after mode changes and by printing mode changes
before the similarity index.
|
|
|
bba9599a
|
2020-03-26T11:56:10
|
|
Merge pull request #5445 from lhchavez/fix-5443
Fix segfault when calling git_blame_buffer()
|
|
e7a1fd88
|
2020-03-26T11:42:47
|
|
Fix spelling error
Signed-off-by: Utkarsh Gupta <utkarsh@debian.org>
|
|
|
74e0489a
|
2020-03-24T19:42:10
|
|
refdb_fs: remove unused header file
The "refdb_fs.h" header contains a single struct `git_refcache` that is
not used anywhere. As a result, we can just delete the header altogether
as it doesn't have any purpose and may confuse readers.
|
|
|
62d59467
|
2020-03-08T02:13:11
|
|
Fix segfault when calling git_blame_buffer()
This change makes sure that the hunk is not null before trying to
dereference it. This avoids segfaults, especially when blaming against a
modified buffer (i.e. the index).
Fixes: #5443
|
|
|
a2d3316a
|
2020-03-13T23:01:11
|
|
refdb_fs: initialize backend version
While the `git_refdb_backend()` struct has a version, we do not
initialize it correctly when calling `git_refdb_backend_fs()`. Fix this
by adding the call to `git_refdb_init_backend()`.
|
|
|
9a102446
|
2020-03-21T16:49:44
|
|
Merge pull request #5455 from pks-t/pks/cmake-install-dirs
cmake: use install directories provided via GNUInstallDirs
|
|
|
87fc539f
|
2020-03-13T22:08:19
|
|
cmake: use install directories provided via GNUInstallDirs
We currently hand-code logic to configure where to install our artifacts
via the `LIB_INSTALL_DIR`, `INCLUDE_INSTALL_DIR` and `BIN_INSTALL_DIR`
variables. This is reinventing the wheel, as CMake already provide a way
to do that via `CMAKE_INSTALL_<DIR>` paths, e.g. `CMAKE_INSTALL_LIB`.
This requires users of libgit2 to know about the discrepancy and will
require special hacks for any build systems that handle these variables
in an automated way. One such example is Gentoo Linux, which sets up
these paths in both the cmake and cmake-utils eclass.
So let's stop doing that: the GNUInstallDirs module handles it in a
better way for us, especially so as the actual values are dependent on
CMAKE_INSTALL_PREFIX. This commit removes our own set of variables and
instead refers users to use the standard ones.
As a second benefit, this commit also fixes our pkgconfig generation to
use the GNUInstallDirs module. We had a bug there where we ignored the
CMAKE_INSTALL_PREFIX when configuring the libdir and includedir keys, so
if libdir was set to "lib64", then libdir would be an invalid path. With
GNUInstallDirs, we can now use `CMAKE_INSTALL_FULL_LIBDIR`, which
handles the prefix for us.
|
|
|
b1f6481f
|
2020-03-10T22:07:35
|
|
cmake: ignore deprecation notes for Secure Transport
The Secure Transport interface we're currently using has been deprecated
with macOS 10.15. As we're currently in code freeze, we cannot migrate
to newer interfaces. As such, let's disable deprecation warnings for
our "schannel.c" stream.
|
|
|
43d7a42b
|
2020-03-08T18:14:09
|
|
win32: don't canonicalize symlink targets
Don't canonicalize symlink targets; our win32 path canonicalization
routines expect an absolute path. In particular, using the path
canonicalization routines for symlink targets (introduced in commit
7d55bee6d, "win32: fix relative symlinks pointing into dirs",
2020-01-10).
Now, use the utf8 -> utf16 relative path handling functions, so that
paths like "../foo" will be translated to "..\foo".
|
|
|
f2b114ba
|
2020-03-08T18:11:45
|
|
win32: introduce relative path handling function
Add a function that takes a (possibly) relative UTF-8 path and emits a
UTF-16 path with forward slashes translated to backslashes. If the
given path is, in fact, absolute, it will be translated to absolute path
handling rules.
|
|
|
fb7da154
|
2020-03-08T16:34:23
|
|
win32: clarify usage of path canonicalization funcs
The path canonicalization functions on win32 are intended to
canonicalize absolute paths; those with prefixes. In other words,
things start with drive letters (`C:\`), share names (`\\server\share`),
or other prefixes (`\\?\`).
This function removes leading `..` that occur after the prefix but
before the directory/file portion (eg, turning `C:\..\..\..\foo` into
`C:\foo`). This translation is not appropriate for local paths.
|
|
|
e23b8b44
|
2020-03-06T17:13:48
|
|
Merge pull request #5422 from pks-t/pks/cmake-booleans
CMake booleans
|
|
|
8eb1fc36
|
2020-03-06T17:12:18
|
|
Merge pull request #5439 from ignatenkobrain/patch-2
Set proper pkg-config dependency for pcre2
|
|
|
502e5d51
|
2020-03-01T12:44:39
|
|
httpclient: use a 16kb read buffer for macOS
Use a 16kb read buffer for compatibility with macOS SecureTransport.
SecureTransport `SSLRead` has the following behavior:
1. It will return _at most_ one TLS packet's worth of data, and
2. It will try to give you as much data as you asked for
This means that if you call `SSLRead` with a buffer size that is smaller
than what _it_ reads (in other words, the maximum size of a TLS packet),
then it will buffer that data for subsequent calls. However, it will
also attempt to give you as much data as you requested in your SSLRead
call. This means that it will guarantee a network read in the event
that it has buffered data.
Consider our 8kb buffer and a server sending us 12kb of data on an HTTP
Keep-Alive session. Our first `SSLRead` will read the TLS packet off
the network. It will return us the 8kb that we requested and buffer the
remaining 4kb. Our second `SSLRead` call will see the 4kb that's
buffered and decide that it could give us an additional 4kb. So it will
do a network read.
But there's nothing left to read; that was the end of the data. The
HTTP server is waiting for us to provide a new request. The server will
eventually time out, our `read` system call will return, `SSLRead` can
return back to us and we can make progress.
While technically correct, this is wildly ineffecient. (Thanks, Tim
Apple!)
Moving us to use an internal buffer that is the maximum size of a TLS
packet (16kb) ensures that `SSLRead` will never buffer and it will
always return everything that it read (albeit decrypted).
|
|
dd704944
|
2020-03-03T11:05:04
|
|
Set proper pkg-config dependency for pcre2
Signed-off-by: Igor Raits <i.gnatenko.brain@gmail.com>
|
|
|
a48da8fa
|
2020-02-25T22:49:16
|
|
Merge pull request #5417 from pks-t/pks/ntlmclient-htonll
deps: ntlmclient: fix missing htonll symbols on FreeBSD and SunOS
|
|
|
ebade233
|
2020-02-24T21:49:43
|
|
transports: auth_ntlm: fix use of strdup/strndup
In the NTLM authentication code, we accidentally use strdup(3P) and
strndup(3P) instead of our own wrappers git__strdup and git__strndup,
respectively.
Fix the issue by using our own functions.
|
|
|
d8e71cb2
|
2020-02-24T21:07:34
|
|
cmake: fix ENABLE_TRACE parameter being too strict
In order to check whether tracing support should be turned on, we check
whether ENABLE_TRACE equals "ON". This is being much too strict, as
CMake will also treat "on", "true", "yes" and others as true-ish, but
passing them will disable tracing support now.
Fix the issue by simply removing the STREQUAL, which will cause CMake to
do the right thing automatically.
|
|
ff46c5d3
|
2020-02-20T20:47:22
|
|
Fix typo on GIT_USE_NEC
Signed-off-by: Sven Strickroth <email@cs-ware.de>
|
|
|
4f1923e8
|
2020-02-19T12:14:32
|
|
Merge pull request #5390 from pks-t/pks/sha1-lookup
sha1_lookup: inline its only function into "pack.c"
|
|
|
8aa04a37
|
2020-02-19T12:14:16
|
|
Merge pull request #5391 from pks-t/pks/coverity-fixes
Coverity fixes
|
|
|
0119e57d
|
2020-02-11T10:37:32
|
|
streams: openssl: switch approach to silence Valgrind errors
As OpenSSL loves using uninitialized bytes as another source of entropy,
we need to mark them as defined so that Valgrind won't complain about
use of these bytes. Traditionally, we've been using the macro
`VALGRIND_MAKE_MEM_DEFINED` provided by Valgrind, but starting with
OpenSSL 1.1 the code doesn't compile anymore due to `struct SSL` having
become opaque. As such, we also can't set it as defined anymore, as we
have no way of knowing its size.
Let's change gears instead by just swapping out the allocator functions
of OpenSSL with our own ones. The twist is that instead of calling
`malloc`, we just call `calloc` to have the bytes initialized
automatically. Next to soothing Valgrind, this approach has the benefit
of being completely agnostic of the memory sanitizer and is neatly
contained at a single place.
Note that we shouldn't do this for non-Valgrind builds. As we cannot
set up memory functions for a given SSL context, only, we need to swap
them at a global context. Furthermore, as it's possible to call
`OPENSSL_set_mem_functions` once only, we'd prevent users of libgit2 to
set up their own allocators.
|
|
|
877054f3
|
2020-02-10T12:35:13
|
|
cmake: consolidate Valgrind option
OpenSSL doesn't initialize bytes on purpose in order to generate
additional entropy. Valgrind isn't too happy about that though, causing
it to generate warninings about various issues regarding use of
uninitialized bytes.
We traditionally had some infrastructure to silence these errors in our
OpenSSL stream implementation, where we invoke the Valgrind macro
`VALGRIND_MAKE_MEMDEFINED` in various callbacks that we provide to
OpenSSL. Naturally, we only include these instructions if a preprocessor
define "VALGRIND" is set, and that in turn is only set if passing
"-DVALGRIND" to CMake. We do that in our usual Azure pipelines, but we
in fact forgot to do this in our nightly build. As a result, we get a
slew of warnings for these nightly builds, but not for our normal
builds.
To fix this, we could just add "-DVALGRIND" to our nightly builds. But
starting with commit d827b11b6 (tests: execute leak checker via CTest
directly, 2019-06-28), we do have a secondary variable that directs
whether we want to use memory sanitizers for our builds. As such, every
user wishing to use Valgrind for our tests needs to pass both options
"VALGRIND" and "USE_LEAK_CHECKER", which is cumbersome and error prone,
as can be seen by our own builds.
Instead, let's consolidate this into a single option, removing the old
"-DVALGRIND" one. Instead, let's just add the preprocessor directive if
USE_LEAK_CHECKER equals "valgrind" and remove "-DVALGRIND" from our own
pipelines.
|
|
06f02300
|
2020-02-07T00:33:52
|
|
repository: handle format v1
Git has supported repository format version 1 for some time. This
format is just like version 0, but it supports extensions.
Implementations must reject extensions that they don't support.
Add support for this format version and reject any extensions but
extensions.noop, which is the only extension we currently support.
While we're at it, also clean up an error message.
|
|
|
b3b92e09
|
2020-02-07T12:56:26
|
|
streams: openssl: ignore return value of `git_mutex_lock`
OpenSSL pre-v1.1 required us to set up a locking function to properly
support multithreading. The locking function signature cannot return any
error codes, and as a result we can't do anything if `git_mutex_lock`
fails. To silence static analysis tools, let's just explicitly ignore
its return value by casting it to `void`.
|
|
|
7d1b1774
|
2020-02-07T12:50:39
|
|
cache: fix invalid memory access in case updating cache entry fails
When adding a new entry to our cache where an entry with the same OID
exists already, then we only update the existing entry in case it is
unparsed and the new entry is parsed. Currently, we do not check the
return value of `git_oidmap_set` though when updating the existing
entry. As a result, we will _not_ have updated the existing entry if
`git_oidmap_set` fails, but have decremented its refcount and
incremented the new entry's refcount. Later on, this may likely lead to
dereferencing invalid memory.
Fix the issue by checking the return value of `git_oidmap_set`. In case
it fails, we will simply keep the existing stored instead, even though
it's unparsed.
|
|
|
775af015
|
2020-02-07T12:31:58
|
|
worktree: report errors when unable to read locking reason
Git worktree's have the ability to be locked in order to spare them from
deletion, e.g. if a worktree is absent due to being located on a
removable disk it is a good idea to lock it. When locking such
worktrees, it is possible to give a locking reason in order to help the
user later on when inspecting status of any such locked trees.
The function `git_worktree_is_locked` serves to read out the locking
status. It currently does not properly report any errors when reading
the reason file, and callers are unexpecting of any negative return
values, too. Fix this by converting callers to expect error codes and
checking the return code of `git_futils_readbuffer`.
|
|
|
2288a713
|
2020-02-07T12:15:34
|
|
repository: check error codes when reading common link
When checking whether a path is a valid repository path, we try to read
the "commondir" link file. In the process, we neither confirm that
constructing the file's path succeeded nor do we verify that reading the
file succeeded, which might cause us to verify repositories on an empty
or bogus path later on.
Fix this by checking return values. As the function to verify repos
doesn't currently support returning errors, this commit also refactors
the function to return an error code, passing validity of the repo via
an out parameter instead, and adjusts all existing callers.
|
|
|
b169cd52
|
2020-02-07T12:13:42
|
|
pack-objects: check return code of `git_zstream_set_input`
While `git_zstream_set_input` cannot fail right now, it might change in
the future if we ever decide to have it check its parameters more
vigorously. Let's thus check whether its return code signals an error.
|
|
|
90450d88
|
2020-02-07T12:10:12
|
|
indexer: check return code of `git_hash_ctx_init`
Initialization of the hashing context may fail on some systems, most
notably on Win32 via the legacy hashing context. As such, we need to
always check the error code of `git_hash_ctx_init`, which is not done
when creating a new indexer.
Fix the issue by adding checks.
|