|
bbd65ad2
|
2016-04-11T13:39:31
|
|
tests: skip the unreadable file tests as root
When running as root, skip the unreadable file tests, because, well,
they're probably _not_ unreadable to root unless you've got some
crazy NSA clearance-level honoring operating system shit going on.
|
|
1cac688d
|
2016-04-01T00:29:51
|
|
Merge pull request #3719 from libgit2/ethomson/submodule_status
WD iterator: properly identify submodules
|
|
|
74ab5f2c
|
2016-03-31T17:33:44
|
|
status: test submodules with mixed case
|
|
|
17442b28
|
2016-03-30T17:47:05
|
|
leaks: fix some leaks in the tests
|
|
b6204260
|
2016-02-10T13:46:14
|
|
Failing test.
|
|
ae86aa5a
|
2016-03-16T11:38:02
|
|
iterator: test pathlist handling for directories
tree_iterator was only working properly for a pathlist containing
file paths. In case of directory paths, it didn't match children
which contradicts GIT_DIFF_DISABLE_PATHSPEC_MATCH and
is different from index_iterator and fs_iterator.
As a consequence head-to-index status reporting for a specific
directory did not work properly -- all files have been reported
as added.
Include additional tests.
|
|
|
8a5a2e2f
|
2016-03-17T00:47:50
|
|
status: update test to include valid OID
|
|
ac2fba0e
|
2015-09-16T15:07:27
|
|
git_futils_mkdir_*: make a relative-to-base mkdir
Untangle git_futils_mkdir from git_futils_mkdir_ext - the latter
assumes that we own everything beneath the base, as if it were
being called with a base of the repository or working directory,
and is tailored towards checkout and ensuring that there is no
bogosity beneath the base that must be cleaned up.
This is (at best) slow and (at worst) unsafe in the larger context
of a filesystem where we do not own things and cannot do things like
unlink symlinks that are in our way.
|
|
1e80bf27
|
2015-09-13T06:21:18
|
|
Merge branch 'cmn/ignore-dir-check'
|
|
|
657afd35
|
2015-09-13T06:18:49
|
|
ignore: add test and adjust style and comment for dir with wildmatch
The previous commit left the comment referencing the earlier state of
the code, change it to explain the current logic. While here, change the
logic to avoid repeating the copy of the base pattern.
|
|
71ef639e
|
2015-08-30T18:57:06
|
|
status test: brackets are now literal
|
|
|
ff475375
|
2015-06-17T14:34:10
|
|
diff: check files with the same or newer timestamps
When a file on the workdir has the same or a newer timestamp than the
index, we need to perform a full check of the contents, as the update of
the file may have happened just after we wrote the index.
The iterator changes are such that we can reach inside the workdir
iterator from the diff, though it may be better to have an accessor
instead of moving these structs into the header.
|
|
|
fc656802
|
2015-06-19T08:31:07
|
|
status: test that symlinks don't lose their mode
Test to ensure that when status updates an index, it does not alter
the original mode for file types that are not supported (eg, symlinks
on Windows).
|
|
|
e44abe16
|
2015-06-16T08:51:45
|
|
tests: tick the index when we count OID calculations
These tests want to test that we don't recalculate entries which match
the index already. This is however something we force when truncating
racily-clean entries.
Tick the index forward as we know that we don't perform the
modifications which the racily-clean code is trying to avoid.
|
|
9f3c18e2
|
2015-06-02T08:36:15
|
|
Fixed build warnings on Xcode 6.1
|
|
|
191e97a0
|
2015-05-18T18:15:17
|
|
diff conflicts: don't include incorrect ID
Since a diff entry only concerns a single entry, zero the information
for the index side of a conflict. (The index entry would otherwise
erroneously include the lowest-stage index entry - generally the
ancestor of a conflict.)
Test that during status, the index side of the conflict is empty.
|
|
|
7c948014
|
2015-05-14T14:00:29
|
|
diff/status: introduce conflicts
When diffing against an index, return a new `GIT_DELTA_CONFLICTED`
delta type for items that are conflicted. For a single file path,
only one delta will be produced (despite the fact that there are
multiple entries in the index).
Index iterators now have the (optional) ability to return conflicts
in the index. Prior to this change, they would be omitted, and callers
(like diff) would omit conflicted index entries entirely.
|
|
|
d67f270e
|
2015-05-14T13:30:29
|
|
index: validate mode of new conflicts
|
|
|
ecd60a56
|
2015-05-14T11:52:48
|
|
conflicts: when adding conflicts, remove staged
When adding a conflict for some path, remove the staged entry.
Otherwise, an illegal index (with both stage 0 and high-stage
entries) would result.
|
|
|
2c57114f
|
2015-05-20T21:18:25
|
|
ignore: clear the error when matching a pattern negation
When we discover that we want to keep a negative rule, make sure to
clear the error variable, as it we otherwise return whatever was left by
the previous loop iteration.
|
|
|
f286e271
|
2015-03-31T16:06:33
|
|
status test: always test the new file path
|
|
4f358603
|
2015-03-24T16:33:50
|
|
ignore: fix negative ignores without wildcards.
|
|
|
4e498646
|
2015-01-15T16:50:31
|
|
repository: remove log message override for switching the active branch
We want to use the "checkout: moving from ..." message in order to let
git know when a change of branch has happened. Make the convenience
functions for this goal write this message.
|
|
|
659cf202
|
2015-01-07T12:23:05
|
|
Remove the signature from ref-modifying functions
The signature for the reflog is not something which changes
dynamically. Almost all uses will be NULL, since we want for the
repository's default identity to be used, making it noise.
In order to allow for changing the identity, we instead provide
git_repository_set_ident() and git_repository_ident() which allow a user
to override the choice of signature.
|
|
|
e0a97416
|
2014-12-05T16:31:14
|
|
ignore: adjust test for negating inside a dir
Given
top
!top/foo
in an ignore file, we should not unignore top/foo. This is an
implementation detail of the git code leaking, but that's the behaviour
we should show.
A negation rule can only negate an exact rule it has seen before.
|
|
|
f7fcb18f
|
2014-11-23T14:12:54
|
|
Plug leaks
Valgrind is now clean except for libssl and libgcrypt.
|
|
|
692c0408
|
2014-11-09T08:09:25
|
|
Fixed a couple Clang warnings
|
|
68182085
|
2014-11-07T20:32:50
|
|
git_status_file now takes an exact path
This function has one output but can match multiple files, which can be
unexpected for the user, which would usually path the exact path of the
file he wants the status of.
|
|
|
f1a7906f
|
2014-11-06T11:47:50
|
|
submodules: add failing test for stale module entries
We consider an entry in .gitmodules to mean that we have a submodule at
a particular path, even if HEAD^{tree} and the index do not contain any
reference to it.
We should ignore that submodule entry and simply consider that path to
be a regular directory.
|
|
|
0798b014
|
2014-10-04T11:48:50
|
|
ignore: add failing test for a file mentioning the parent
When we mention "src" in src/.gitignore, we wrongly consider src/ itself
to be ignored.
|
|
|
5c54e216
|
2014-11-05T16:07:07
|
|
ignore: consider files with a CR in their names
We currently consider CR to start the end of the line, but that means
that we miss cases with CR CR LF which can be used with git to match
files whose names have CR at the end of their names.
The fix from the patch comes from Russell's comment in the issue.
This fixes #2536.
|
|
00e9ae5a
|
2014-08-26T17:48:20
|
|
Merge pull request #2508 from libgit2/rb/fix-ignore-slash-star
Fix bugs with negative ignores inside an ignored parent directory
|
|
|
c8402334
|
2014-08-13T17:23:07
|
|
Don't include the unreadable tests on win32
|
|
bbe13802
|
2014-06-12T14:19:34
|
|
Demonstrate a trailing slash failure.
`git help ignore` has this to say about trailing slashes:
> If the pattern ends with a slash, it is removed for the purpose of
> the following description, but it would only find a match with a
> directory. In other words, foo/ will match a directory foo and
> paths underneath it, but will not match a regular file or a
> symbolic link foo (this is consistent with the way how pathspec
> works in general in Git).
Sure enough, having manually performed the same steps as this test,
`git status` tells us the following:
# On branch master
#
# Initial commit
#
# Changes to be committed:
# (use "git rm --cached <file>..." to unstage)
#
# new file: force.txt
#
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# ../.gitignore
# child1/
# child2/
i.e. neither child1 nor child2 is ignored.
|
|
|
aa5cdf63
|
2014-06-04T11:57:53
|
|
status: failing test with slash-star
When writing 'bin/*' in the rules, this means we ignore very file inside
bin/ individually, but do not ignore the directory itself. Thus the
status listing should list both files under bin/, one untracked and one
ignored.
|
|
7d0ab0fa
|
2014-07-22T15:08:24
|
|
Merge remote-tracking branch 'origin/master' into fix-git-status-list-new-unreadable-folder
|
|
|
0cee70eb
|
2014-07-01T14:09:01
|
|
Introduce cl_assert_equal_oid
|
|
|
dc49e1b5
|
2014-06-04T15:36:28
|
|
Merge remote-tracking branch 'origin/development' into fix-git-status-list-new-unreadable-folder
Conflicts:
include/git2/diff.h
|
|
|
a576a342
|
2014-06-04T14:47:44
|
|
Add another test for unreadable and not included.
|
|
|
79d5b5c9
|
2014-06-03T17:42:52
|
|
Add GIT_STATUS_OPT_INCLUDE_UNREADABLE_AS_UNTRACKED
and a (failing) test for it.
|
|
|
523553f9
|
2014-05-30T16:22:26
|
|
Fix the no permissions test.
|
|
|
59fcebaa
|
2014-05-30T16:22:13
|
|
Use 'X' for unreadable status.
|
|
|
c3252c11
|
2014-05-23T00:29:04
|
|
We do expect the foo path in the nopermissions test
|
|
|
6580b11c
|
2014-05-22T19:26:55
|
|
Remove errant newline
|
|
|
9532edc0
|
2014-05-21T23:13:46
|
|
Simplify the no permission test.
|
|
|
dc4906f1
|
2014-05-15T17:40:28
|
|
Skip unreadable files for now.
|
|
|
8d3a2d5f
|
2014-05-15T16:33:26
|
|
Simplify the test.
|
|
|
2b5a99d8
|
2014-05-14T17:02:07
|
|
Add a test (failing) for a work tree status.
When thees is an unreadable folder, we should still be able
to enumerate status.
|
|
f554611a
|
2014-05-06T12:41:26
|
|
Improve checks for ignore containment
The diff code was using an "ignored_prefix" directory to track if
a parent directory was ignored that contained untracked files
alongside tracked files. Unfortunately, when negative ignore rules
were used for directories inside ignored parents, the wrong rules
were applied to untracked files inside the negatively ignored
child directories.
This commit moves the logic for ignore containment into the workdir
iterator (which is a better place for it), so the ignored-ness of
a directory is contained in the frame stack during traversal. This
allows a child directory to override with a negative ignore and yet
still restore the ignored state of the parent when we traverse out
of the child.
Along with this, there are some problems with "directory only"
ignore rules on container directories. Given "a/*" and "!a/b/c/"
(where the second rule is a directory rule but the first rule is
just a generic prefix rule), then the directory only constraint
was having "a/b/c/d/file" match the first rule and not the second.
This was fixed by having ignore directory-only rules test a rule
against the prefix of a file with LEADINGDIR enabled.
Lastly, spot checks for ignores using `git_ignore_path_is_ignored`
were tested from the top directory down to the bottom to deal with
the containment problem, but this is wrong. We have to test bottom
to top so that negative subdirectory rules will be checked before
parent ignore rules.
This does change the behavior of some existing tests, but it seems
only to bring us more in line with core Git, so I think those
changes are acceptable.
|
|
|
0f603132
|
2014-05-01T14:47:33
|
|
Improve handling of fake home directory
There are a few tests that set up a fake home directory and a
fake GLOBAL search path so that we can test things in global
ignore or attribute or config files. This cleans up that code to
work more robustly even if there is a test failure. This also
fixes some valgrind warnings where scanning search paths for
separators could end up doing a little bit of sketchy data access
when coming to the end of search list.
|
|
|
9c8ed499
|
2014-04-29T15:05:58
|
|
Remove trace / add git_diff_perfdata struct + api
|
|
|
b23b112d
|
2014-04-29T11:29:49
|
|
Add payloads, bitmaps to trace API
This is a proposed adjustment to the trace APIs. This makes the
trace levels into a bitmask so that they can be selectively enabled
and adds a callback-level payload, plus a message-level payload.
This makes it easier for me to a GIT_TRACE_PERF callbacks that
are simply bypassed if the PERF level is not set.
|
|
|
225aab5d
|
2014-04-28T16:47:39
|
|
Don't use trace if GIT_TRACE not defined
|
|
|
cd424ad5
|
2014-04-28T16:39:53
|
|
Add GIT_STATUS_OPT_UPDATE_INDEX and use trace API
This adds an option to refresh the stat cache while generating
status. It also rips out the GIT_PERF stuff I had an makes use
of the trace API to keep statistics about what happens during diff.
|
|
|
8ef4e11a
|
2014-04-28T14:16:26
|
|
Skip diff oid calc when size definitely changed
When we think the stat cache in the index seems valid and the size
or mode of a file has definitely changed, then don't bother trying
to recalculate the OID of the workdir bits to confirm that it is
modified - just accept that it is modified.
This can result in files that show as modified with no actual diff,
but the behavior actually appears to match Git on the command line.
This also includes a minor optimization to not perform a submodule
lookup on the ".git" directory itself.
|
|
|
6b833e3a
|
2014-04-24T15:40:50
|
|
Improve docs for status rename detection limits
and make tests empty on platforms without iconv support.
|
|
|
f608f3bb
|
2014-04-24T15:25:01
|
|
Test toggling core.precomposeunicode yields rename
There is an interesting difference with core Git here, though.
Because libgit2 will do rename detection with the working directory,
in the last case where the HEAD and the working directory both
have the decomposed data and the index has the composed data, we
generate a single status record with two renames whereas Git will
generate one rename (head to index) and one untracked file.
|
|
|
2334e3d8
|
2014-04-24T14:46:59
|
|
Test decomposed unicode renames work as expected
|
|
|
916fcbd6
|
2014-04-18T14:42:40
|
|
Fix ignore difference from git with trailing /*
Ignore patterns that ended with a trailing '/*' were still needing
to match against another actual '/' character in the full path.
This is not the same behavior as core Git.
Instead, we strip a trailing '/*' off of any patterns that were
matching and just take it to imply the FNM_LEADING_DIR behavior.
|
|
|
50e46d60
|
2014-04-18T10:58:01
|
|
Cleanup tests with helper functions
|
|
|
6a0956e5
|
2014-04-18T10:32:35
|
|
Pop ignore only if whole relative path matches
When traversing the directory structure, the iterator pushes and
pops ignore files using a vector. Some directories don't have
ignore files, so it uses a path comparison to decide when it is
right to actually pop the last ignore file. This was only
comparing directory suffixes, though, so a subdirectory with the
same name as a parent could result in the parent's .gitignore
being popped off the list ignores too early. This changes the
logic to compare the entire relative path of the ignore file.
|
|
|
823c0e9c
|
2014-04-17T11:53:13
|
|
Fix broken logic for attr cache invalidation
The checks to see if files were out of date in the attibute cache
was wrong because the cache-breaker data wasn't getting stored
correctly. Additionally, when the cache-breaker triggered, the
old file data was being leaked.
|
|
|
a9528b8f
|
2014-04-14T15:59:48
|
|
Fix core.excludesfile named .gitignore
Ignore rules with slashes in them are matched using FNM_PATHNAME
and use the path to the .gitignore file from the root of the
repository along with the path fragment (including slashes) in
the ignore file itself. Unfortunately, the relative path to the
.gitignore file was being applied to the global core.excludesfile
if that was also named ".gitignore".
This fixes that with more precise matching and includes test for
ignore rules with leading slashes (which were the primary example
of this being broken in the real world).
This also backports an improvement to the file context logic from
the threadsafe-iterators branch where we don't rely on mutating
the key of the attribute file name to generate the context path.
|
|
|
06d772d8
|
2014-04-14T14:49:01
|
|
Merge pull request #2262 from libgit2/rb/fix-ignore-pop
Fix bug popping ignore files during wd iteration
|
|
|
8f7bc646
|
2014-04-10T16:33:39
|
|
Fix bug popping ignore files during wd iteration
There were a couple bugs in popping ignore files during iteration
that could result in incorrect decisions be made and thus ignore
files below the root either not being loaded correctly or not
being popped at the right time.
One bug was an off-by-one in comparing the path of the gitignore
file with the path being exited during iteration.
The second bug was not correctly truncating the path being tracked
during traversal if there were no ignores on the list (i.e. when
you have no .gitignore at the root, but do have some in contained
directories).
|
|
|
eb7e17cc
|
2014-04-08T14:47:20
|
|
Update submodules with parent-tracked content
This updates how libgit2 treats submodule-like directories that
actually have tracked content inside of them. This is a strange
corner case, but it seems that many people have abortive submodule
setups and then just went ahead and added the files into the
parent repository. In this case, we should just treat the
submodule as if it was a normal directory.
Libgit2 will still try to skip over real submodules and contained
repositories that do not have tracked files inside them, but this
adds some new handling for cases where the apparently submodule
data is in conflict with the actual list of tracked files.
|
|
|
a574d584
|
2014-04-01T21:32:06
|
|
New tests of status for repo inside repo
|
|
|
a15c7802
|
2014-03-25T09:14:48
|
|
Make submodules externally refcounted
`git_submodule` objects were already refcounted internally in case
the submodule name was different from the path at which it was
stored. This makes that refcounting externally used as well, so
`git_submodule_lookup` and `git_submodule_add_setup` return an
object that requires a `git_submodule_free` when done.
|
|
94f263f5
|
2014-01-25T08:04:49
|
|
Add reflog params to set-head calls
|
|
|
3cf11eef
|
2014-01-28T11:47:33
|
|
Misc cleanups
|
|
|
d541170c
|
2014-01-24T11:36:41
|
|
index: rename an entry's id to 'id'
This was not converted when we converted the rest, so do it now.
|
|
|
410a8e6f
|
2014-01-22T18:31:25
|
|
Sometimes a zero byte file is just a zero byte file
Don't go to the ODB to resolve zero byte files in the workdir
|
|
|
b554ca5d
|
2014-01-20T15:12:06
|
|
"Uninitialized" submodules are "unmodified"
Extend the "unmodified" submodule workdir test to include
uninitialized submodules, to prevent reporting submodules as
modified when they're not in the workdir at all.
|
|
|
25e0b157
|
2013-12-06T15:07:57
|
|
Remove converting user error to GIT_EUSER
This changes the behavior of callbacks so that the callback error
code is not converted into GIT_EUSER and instead we propagate the
return value through to the caller. Instead of using the
giterr_capture and giterr_restore functions, we now rely on all
functions to pass back the return value from a callback.
To avoid having a return value with no error message, the user
can call the public giterr_set_str or some such function to set
an error message. There is a new helper 'giterr_set_callback'
that functions can invoke after making a callback which ensures
that some error message was set in case the callback did not set
one.
In places where the sign of the callback return value is
meaningful (e.g. positive to skip, negative to abort), only the
negative values are returned back to the caller, obviously, since
the other values allow for continuing the loop.
The hardest parts of this were in the checkout code where positive
return values were overloaded as meaningful values for checkout.
I fixed this by adding an output parameter to many of the internal
checkout functions and removing the overload. This added some
code, but it is probably a better implementation.
There is some funkiness in the network code where user provided
callbacks could be returning a positive or a negative value and
we want to rely on that to cancel the loop. There are still a
couple places where an user error might get turned into GIT_EUSER
there, I think, though none exercised by the tests.
|
|
|
17820381
|
2013-11-14T14:05:52
|
|
Rename tests-clar to tests
|