Edit
IABSD.fr/src/gnu/llvm/docs/MemorySSA.rst
patrick
- gnu/llvm/docs/MemorySSA.rst
-
========= MemorySSA ========= .. contents:: :local: Introduction ============ ``MemorySSA`` is an analysis that allows us to cheaply reason about the interactions between various memory operations. Its goal is to replace ``MemoryDependenceAnalysis`` for most (if not all) use-cases. This is because, unless you're very careful, use of ``MemoryDependenceAnalysis`` can easily result in quadratic-time algorithms in LLVM. Additionally, ``MemorySSA`` doesn't have as many arbitrary limits as ``MemoryDependenceAnalysis``, so you should get better results, too. At a high level, one of the goals of ``MemorySSA`` is to provide an SSA based form for memory, complete with def-use and use-def chains, which enables users to quickly find may-def and may-uses of memory operations. It can also be thought of as a way to cheaply give versions to the complete state of heap memory, and associate memory operations with those versions. This document goes over how ``MemorySSA`` is structured, and some basic intuition on how ``MemorySSA`` works. A paper on MemorySSA (with notes about how it's implemented in GCC) `can be found here <http://www.airs.com/dnovillo/Papers/mem-ssa.pdf>`_. Though, it's relatively out-of-date; the paper references multiple heap partitions, but GCC eventually swapped to just using one, like we now have in LLVM. Like GCC's, LLVM's MemorySSA is intraprocedural. MemorySSA Structure =================== MemorySSA is a virtual IR. After it's built, ``MemorySSA`` will contain a structure that maps ``Instruction``\ s to ``MemoryAccess``\ es, which are ``MemorySSA``'s parallel to LLVM ``Instruction``\ s. Each ``MemoryAccess`` can be one of three types: - ``MemoryPhi`` - ``MemoryUse`` - ``MemoryDef`` ``MemoryPhi``\ s are ``PhiNode``\ s, but for memory operations. If at any point we have two (or more) ``MemoryDef``\ s that could flow into a ``BasicBlock``, the block's top ``MemoryAccess`` will be a ``MemoryPhi``. As in LLVM IR, ``MemoryPhi``\ s don't correspond to any concrete operation. As such, ``BasicBlock``\ s are mapped to ``MemoryPhi``\ s inside ``MemorySSA``, whereas ``Instruction``\ s are mapped to ``MemoryUse``\ s and ``MemoryDef``\ s. Note also that in SSA, Phi nodes merge must-reach definitions (that is, definitions that *must* be new versions of variables). In MemorySSA, PHI nodes merge may-reach definitions (that is, until disambiguated, the versions that reach a phi node may or may not clobber a given variable). ``MemoryUse``\ s are operations which use but don't modify memory. An example of a ``MemoryUse`` is a ``load``, or a ``readonly`` function call. ``MemoryDef``\ s are operations which may either modify memory, or which introduce some kind of ordering constraints. Examples of ``MemoryDef``\ s include ``store``\ s, function calls, ``load``\ s with ``acquire`` (or higher) ordering, volatile operations, memory fences, etc. Every function that exists has a special ``MemoryDef`` called ``liveOnEntry``. It dominates every ``MemoryAccess`` in the function that ``MemorySSA`` is being run on, and implies that we've hit the top of the function. It's the only ``MemoryDef`` that maps to no ``Instruction`` in LLVM IR. Use of ``liveOnEntry`` implies that the memory being used is either undefined or defined before the function begins. An example of all of this overlaid on LLVM IR (obtained by running ``opt -passes='print<memoryssa>' -disable-output`` on an ``.ll`` file) is below. When viewing this example, it may be helpful to view it in terms of clobbers. The operands of a given ``MemoryAccess`` are all (potential) clobbers of said MemoryAccess, and the value produced by a ``MemoryAccess`` can act as a clobber for other ``MemoryAccess``\ es. Another useful way of looking at it is in terms of heap versions. In that view, operands of a given ``MemoryAccess`` are the version of the heap before the operation, and if the access produces a value, the value is the new version of the heap after the operation. .. code-block:: llvm define void @foo() { entry: %p1 = alloca i8 %p2 = alloca i8 %p3 = alloca i8 ; 1 = MemoryDef(liveOnEntry) store i8 0, i8* %p3 br label %while.cond while.cond: ; 6 = MemoryPhi({%0,1},{if.end,4}) br i1 undef, label %if.then, label %if.else if.then: ; 2 = MemoryDef(6) store i8 0, i8* %p1 br label %if.end if.else: ; 3 = MemoryDef(6) store i8 1, i8* %p2 br label %if.end if.end: ; 5 = MemoryPhi({if.then,2},{if.else,3}) ; MemoryUse(5) %1 = load i8, i8* %p1 ; 4 = MemoryDef(5) store i8 2, i8* %p2 ; MemoryUse(1) %2 = load i8, i8* %p3 br label %while.cond } The ``MemorySSA`` IR is shown in comments that precede the instructions they map to (if such an instruction exists). For example, ``1 = MemoryDef(liveOnEntry)`` is a ``MemoryAccess`` (specifically, a ``MemoryDef``), and it describes the LLVM instruction ``store i8 0, i8* %p3``. Other places in ``MemorySSA`` refer to this particular ``MemoryDef`` as ``1`` (much like how one can refer to ``load i8, i8* %p1`` in LLVM with ``%1``). Again, ``MemoryPhi``\ s don't correspond to any LLVM Instruction, so the line directly below a ``MemoryPhi`` isn't special. Going from the top down: - ``6 = MemoryPhi({entry,1},{if.end,4})`` notes that, when entering ``while.cond``, the reaching definition for it is either ``1`` or ``4``. This ``MemoryPhi`` is referred to in the textual IR by the number ``6``. - ``2 = MemoryDef(6)`` notes that ``store i8 0, i8* %p1`` is a definition, and its reaching definition before it is ``6``, or the ``MemoryPhi`` after ``while.cond``. (See the `Build-time use optimization`_ and `Precision`_ sections below for why this ``MemoryDef`` isn't linked to a separate, disambiguated ``MemoryPhi``.) - ``3 = MemoryDef(6)`` notes that ``store i8 0, i8* %p2`` is a definition; its reaching definition is also ``6``. - ``5 = MemoryPhi({if.then,2},{if.else,3})`` notes that the clobber before this block could either be ``2`` or ``3``. - ``MemoryUse(5)`` notes that ``load i8, i8* %p1`` is a use of memory, and that it's clobbered by ``5``. - ``4 = MemoryDef(5)`` notes that ``store i8 2, i8* %p2`` is a definition; it's reaching definition is ``5``. - ``MemoryUse(1)`` notes that ``load i8, i8* %p3`` is just a user of memory, and the last thing that could clobber this use is above ``while.cond`` (e.g. the store to ``%p3``). In heap versioning parlance, it really only depends on the heap version 1, and is unaffected by the new heap versions generated since then. As an aside, ``MemoryAccess`` is a ``Value`` mostly for convenience; it's not meant to interact with LLVM IR. Design of MemorySSA =================== ``MemorySSA`` is an analysis that can be built for any arbitrary function. When it's built, it does a pass over the function's IR in order to build up its mapping of ``MemoryAccess``\ es. You can then query ``MemorySSA`` for things like the dominance relation between ``MemoryAccess``\ es, and get the ``MemoryAccess`` for any given ``Instruction`` . When ``MemorySSA`` is done building, it also hands you a ``MemorySSAWalker`` that you can use (see below). The walker ---------- A structure that helps ``MemorySSA`` do its job is the ``MemorySSAWalker``, or the walker, for short. The goal of the walker is to provide answers to clobber queries beyond what's represented directly by ``MemoryAccess``\ es. For example, given: .. code-block:: llvm define void @foo() { %a = alloca i8 %b = alloca i8 ; 1 = MemoryDef(liveOnEntry) store i8 0, i8* %a ; 2 = MemoryDef(1) store i8 0, i8* %b } The store to ``%a`` is clearly not a clobber for the store to ``%b``. It would be the walker's goal to figure this out, and return ``liveOnEntry`` when queried for the clobber of ``MemoryAccess`` ``2``. By default, ``MemorySSA`` provides a walker that can optimize ``MemoryDef``\ s and ``MemoryUse``\ s by consulting whatever alias analysis stack you happen to be using. Walkers were built to be flexible, though, so it's entirely reasonable (and expected) to create more specialized walkers (e.g. one that specifically queries ``GlobalsAA``, one that always stops at ``MemoryPhi`` nodes, etc). Locating clobbers yourself ^^^^^^^^^^^^^^^^^^^^^^^^^^ If you choose to make your own walker, you can find the clobber for a ``MemoryAccess`` by walking every ``MemoryDef`` that dominates said ``MemoryAccess``. The structure of ``MemoryDef``\ s makes this relatively simple; they ultimately form a linked list of every clobber that dominates the ``MemoryAccess`` that you're trying to optimize. In other words, the ``definingAccess`` of a ``MemoryDef`` is always the nearest dominating ``MemoryDef`` or ``MemoryPhi`` of said ``MemoryDef``. Build-time use optimization --------------------------- ``MemorySSA`` will optimize some ``MemoryAccess``\ es at build-time. Specifically, we optimize the operand of every ``MemoryUse`` to point to the actual clobber of said ``MemoryUse``. This can be seen in the above example; the second ``MemoryUse`` in ``if.end`` has an operand of ``1``, which is a ``MemoryDef`` from the entry block. This is done to make walking, value numbering, etc, faster and easier. It is not possible to optimize ``MemoryDef`` in the same way, as we restrict ``MemorySSA`` to one heap variable and, thus, one Phi node per block. Invalidation and updating ------------------------- Because ``MemorySSA`` keeps track of LLVM IR, it needs to be updated whenever the IR is updated. "Update", in this case, includes the addition, deletion, and motion of ``Instructions``. The update API is being made on an as-needed basis. If you'd like examples, ``GVNHoist`` is a user of ``MemorySSA``\ s update API. Phi placement ^^^^^^^^^^^^^ ``MemorySSA`` only places ``MemoryPhi``\ s where they're actually needed. That is, it is a pruned SSA form, like LLVM's SSA form. For example, consider: .. code-block:: llvm define void @foo() { entry: %p1 = alloca i8 %p2 = alloca i8 %p3 = alloca i8 ; 1 = MemoryDef(liveOnEntry) store i8 0, i8* %p3 br label %while.cond while.cond: ; 3 = MemoryPhi({%0,1},{if.end,2}) br i1 undef, label %if.then, label %if.else if.then: br label %if.end if.else: br label %if.end if.end: ; MemoryUse(1) %1 = load i8, i8* %p1 ; 2 = MemoryDef(3) store i8 2, i8* %p2 ; MemoryUse(1) %2 = load i8, i8* %p3 br label %while.cond } Because we removed the stores from ``if.then`` and ``if.else``, a ``MemoryPhi`` for ``if.end`` would be pointless, so we don't place one. So, if you need to place a ``MemoryDef`` in ``if.then`` or ``if.else``, you'll need to also create a ``MemoryPhi`` for ``if.end``. If it turns out that this is a large burden, we can just place ``MemoryPhi``\ s everywhere. Because we have Walkers that are capable of optimizing above said phis, doing so shouldn't prohibit optimizations. Non-Goals --------- ``MemorySSA`` is meant to reason about the relation between memory operations, and enable quicker querying. It isn't meant to be the single source of truth for all potential memory-related optimizations. Specifically, care must be taken when trying to use ``MemorySSA`` to reason about atomic or volatile operations, as in: .. code-block:: llvm define i8 @foo(i8* %a) { entry: br i1 undef, label %if.then, label %if.end if.then: ; 1 = MemoryDef(liveOnEntry) %0 = load volatile i8, i8* %a br label %if.end if.end: %av = phi i8 [0, %entry], [%0, %if.then] ret i8 %av } Going solely by ``MemorySSA``'s analysis, hoisting the ``load`` to ``entry`` may seem legal. Because it's a volatile load, though, it's not. Design tradeoffs ---------------- Precision ^^^^^^^^^ ``MemorySSA`` in LLVM deliberately trades off precision for speed. Let us think about memory variables as if they were disjoint partitions of the heap (that is, if you have one variable, as above, it represents the entire heap, and if you have multiple variables, each one represents some disjoint portion of the heap) First, because alias analysis results conflict with each other, and each result may be what an analysis wants (IE TBAA may say no-alias, and something else may say must-alias), it is not possible to partition the heap the way every optimization wants. Second, some alias analysis results are not transitive (IE A noalias B, and B noalias C, does not mean A noalias C), so it is not possible to come up with a precise partitioning in all cases without variables to represent every pair of possible aliases. Thus, partitioning precisely may require introducing at least N^2 new virtual variables, phi nodes, etc. Each of these variables may be clobbered at multiple def sites. To give an example, if you were to split up struct fields into individual variables, all aliasing operations that may-def multiple struct fields, will may-def more than one of them. This is pretty common (calls, copies, field stores, etc). Experience with SSA forms for memory in other compilers has shown that it is simply not possible to do this precisely, and in fact, doing it precisely is not worth it, because now all the optimizations have to walk tons and tons of virtual variables and phi nodes. So we partition. At the point at which you partition, again, experience has shown us there is no point in partitioning to more than one variable. It simply generates more IR, and optimizations still have to query something to disambiguate further anyway. As a result, LLVM partitions to one variable. Use Optimization ^^^^^^^^^^^^^^^^ Unlike other partitioned forms, LLVM's ``MemorySSA`` does make one useful guarantee - all loads are optimized to point at the thing that actually clobbers them. This gives some nice properties. For example, for a given store, you can find all loads actually clobbered by that store by walking the immediate uses of the store.