IABSD.fr/xenocara/util/cf/sequent.cf

Branch : - branch - master - tag -

• Show log

  Commit

• Author : matthieu
  Date : 2006-11-25 16:15:45
  Hash : 782466d3
  Message : import from X.Org 7.2RC2

• util/cf/sequent.cf

• XCOMM platform:  $XConsortium: sequent.cf$
  
  /*
   * SET VERSION NUMBERS BEFORE MAKING MAKEFILES; also, you'll need to install
   * util/scripts/bsdinstall.sh before doing a "make install"
   */
  
  /*
   * Version numbers are set one of two ways:
   *
   * If the target version is different than the machine you are building on,
   * set the target versions using the environmental variable IMAKEINCLUDES.
   * Example: IMAKEINCLUDES="-I. -DOSMajorVersion=4 -DOSMinorVersion=4"
   * This is usually only done at Sequent when building a product using
   * cross compiling tools and target headers and libraries.
   *
   * Otherwise, the imake will use uname(2) to calculate the default to be
   * the same as the machine you are building on.  The X11R6 imake will set
   * DefaultOS*Version macros to be these default values.
   * Those default values will be used in the assignments below.
   * This is the recommended method to be used by customers.
   */
  
  				/* defaults from imake via uname(2) */
  #ifndef OSName
  #define OSName			DefaultOSName
  #endif
  #ifndef OSMajorVersion
  #define OSMajorVersion		DefaultOSMajorVersion
  #endif
  #ifndef OSMinorVersion
  #define OSMinorVersion		DefaultOSMinorVersion
  #endif
  #ifndef OSTeenyVersion
  #define OSTeenyVersion		DefaultOSTeenyVersion
  #endif
  XCOMM operating system:  OSName V/**/OSMajorVersion./**/OSMinorVersion./**/OSTeenyVersion
  
  /*
   * Sequent Dynix/PTX 4.x.x (SVR4) and later operating systems.
   *
   * Sequent Dynix/PTX 4.2.3 and later operating systems are supported with
   * the X11R6 sequent.cf and other X11R6 configuration files.
   * Specifically 4.4.2 and later have been tested.
   *
   * Attempting to use these X11R6 configuration files and X11R6 source files
   * with early versions of Dynix/PTX 4.x.x may work, however that will not be
   * tested or supported at Sequent.
   * Sequent Dynix/PTX 2.1.x has been retired so support for it and earlier
   * releases has been removed.
   */
  
  #if OSMajorVersion >= 4
  
  #define SystemV4		YES
  #define SequentVersionDefines	-DSVR4
  #define ExtraLibraries		
  #define ForceNormalLib		YES
  #define HasRequiredLibs		YES
  #define NeedBerklib		NO	/* gettimeofday in libc */
  
  #define XmExtraLibraries	/* for ABI-compliance do not use -lgen here */
  #define MotifDefines		-DXM_STRINGS_1_2_2_STATE  /* code review */
  
  /* initial port does not use multiple socket libs, default libsocket.so.1.1 */
  #define HasMultipleSockets	NO	/* obsolete */ /* only libsocket.so.1.1 */
  
  #endif /* OSMajorVersion >= 4 */
  
  /*
   * Below this line are generic defines that apply to all Sequent systems.
   * However they are currently tested with only OSMajorVersion >= 4
   */
  
  /*
   * The following cpp macro defines are order independent,
   * since the right-hand-side is constant.
   * Therefore these are simply listed in alphabetical order.
   * Macros defined later may use these definitions.
   */
  
  /* 
   * Threads.tmpl cpp macros.
   * Sequent overrides the Threads.tmpl defaults with the values below.
   * Sequent has native threads for ptx 4.5.0 and higher.
   */
  
  #if ( OSMajorVersion >= 5 || (OSMajorVersion == 4 && OSMinorVersion >= 5) )
  
  #define HasPosixThreads			YES
  #define HasThreadSafeAPI		YES
  #define ThreadedX			YES
  #define ThreadsLibraries		/**/
  #define ThreadsCplusplusLibraries	/**/
  #define ThreadPreStdAPIDefines		/**/
  #define ThreadsCompileFlags		-Kthread
  #define ThreadsCplusplusCompileFlags	-Kthread
  #define SharedThreadReqs		/**/
  
  /*
   * THREADS macro and environment variable used with Sequent commands only.
   * We use THREADS rather than the generic X11 THREADS_CFLAGS because we 
   * want to ensure that the macro is defined for all compiles and not just
   * those Makefiles built from a Imakefile that includes Threads.tmpl.
   *
   * Sequent compiler option -Kthread will also define -D_SEQUENT_THREADS.
   * Currently using -Kthread is the recommended interface to this define.
   * Currently there are no extra includes files using -D_SEQUENT_THREADS.
   * Currently no reason for makedepend or cpp to use -D_SEQUENT_THREADS.
   * If needed in the future, we would add to ProjectThreadsDefines
   *
   * #define ProjectThreadsDefines -DXTHREADS -D_SEQUENT_THREADS
   */
  
    THREADS = -Kthread
  
  #endif /* ptx 4.5.0 or greater has threads */
  
  /* 
   * Imake.tmpl cpp macros.
   * Sequent overrides the Imake.tmpl defaults with the values below.
   */
  
  #define BuildLibPathVar		LD_LIBRARY_PATH
  #define DefaultCCOptions	-Xa
  #define ExpandManNames		YES
  #define ExtraFilesToClean	*.z
  #define HasNdbm			YES
  #define HasShadowPasswd		YES
  #define HasSockets		YES	/* default */
  #define HasVarDirectory		NO
  #ifdef UseInstalled
  #define InstallCmd $(BINDIR)/ptxinst -t "$(TOOLS)"
  #else
  #define InstallCmd $(SHELL) $(SCRIPTSRC)/ptxinst.sh
  #endif /* UseInstalled */
  #define InstPgmFlags		-s -m 0555 -o bin -g bin
  #define InstBinFlags		-s -m 0555 -o bin -g bin
  #define InstLibFlags		-m 0444 -o bin -g bin
  #define InstShLibFlags		-m 0555 -o bin -g bin
  #define Malloc0ReturnsNull	YES
  #define ManSuffix	1		/* use just one tab or cpp will die */
  #define LibManSuffix	3x		/* use just one tab or cpp will die */
  #define LibmanDir	$(MANSOURCEPATH)3
  #define MiscManSuffix	5x		/* use just one tab or cpp will die */
  #define MiscManDir	$(MANSOURCEPATH)5
  #define MkdirHierCmd		mkdir -p
  #define NeedConstPrototypes     YES
  #define NeedFunctionPrototypes  YES
  #define NeedNestedPrototypes    YES
  #define NeedVarargsPrototypes   YES
  #define StripInstalledPrograms	YES
  #define SystemManDirectory	/usr/catman
  #define TermcapLibrary		-lcurses	/* code review for SVR4 ? */
  #define TerminfoDir		/usr/lib/terminfo	/* Sequent addition */
  #define ToolkitStringsABIOptions -intelabi
  
  
  /* 
   * X11.tmpl cpp macros.
   * Sequent overrides the X11.tmpl defaults with the values below.
   */
  
  #define BuildDps		YES
  #define BuildServer		YES
  #define BuildXF86DGA		NO	/* DGA has no meaning on Sequent HW */
  #define BuildXF86MiscExt	NO	/* turn off the server portion */
  #define BuildXF86VidModeExt	NO	/* turn off the server portion */
  #define BuildXInputExt		YES
  #define BuildXKBuilib		YES	/* override NO set in xorg.cf */
  #define ConnectionFlags		-DTCPCONN
  #define DefaultSystemPath	/bin:/etc:/usr/bin:$(BINDIR)
  #define DefaultUserPath		:/bin:/usr/bin:$(BINDIR)
  #define HasPlugin		YES
  #define HasXServer		NO
  #define InstallFSConfig		YES	/* safe since we install to DESTDIR */
  #define InstallXdmConfig	YES	/* safe since we install to DESTDIR */
  #define MotifBC			NO	/* default, code review from X11R5  */
  #define XdmServersType	fs	/* One tab here.  Needed if BuildServer YES */
  #define XtMalloc0ReturnsNullDefines Malloc0ReturnsNullDefines -DXTMALLOC_BC
  #define XprtServer		YES
  #define XVirtualFramebufferServer	YES
  #define XF86SVGAServer		NO	/* Don't build the XFree86 servers */
  #define XF86S3Server		NO
  #define XF86S3VServer		NO
  #define XF86I8514Server		NO
  #define XF86Mach8Server		NO
  #define XF86Mach32Server	NO
  #define XF86Mach64Server	NO
  #define XF86P9000Server		NO
  #define XF86AGXServer		NO
  #define XF86I128Server		NO
  #define XF86GLINTServer		NO
  #define XF86REALimageServer	NO
  
  /* 
   * Motif.tmpl cpp macros.
   * Sequent overrides the Motif.tmpl default with the values below.
   */
  
  #define GencatCmd             /usr/lbin/gencat
  
  /* Port Sequent macro DontBuildMotifConfig to Motif 2.1 */
  /*
   * #ifndef MetroLink
   * #define DontBuildMotifConfig
   * #endif
   */
  
  /* 
   * Sequent added cpp macros.
   * 
   * The following cpp macro defines have been introduced by Sequent.
   * They will be referenced in Sequent patches sent to TOG.
   * They may be moved above if accepted by TOG or X.org.
   */
  
  #define AdminBaseDir		  /usr/admin.ptx/etc/base.dir
  #define MessageCatDir		  /usr/lib/message/C
  #define NeedXinputAlias		  YES
  #define UseHidesymsLists	  YES
  #define XlbiffMailPath		  /usr/mail/%s	/* used by contrib xlbiff */
  
  /* 
   * Imake.tmpl, X11.tmpl, or other order dependent cpp defines.
   *
   * The following cpp macro defines are order dependent.
   * They depend on previously defined cpp macros.
   * Do not change the order.
   */
  #define SharedLibraryCCOptions	DefaultCCOptions
  #define StandardDefines		SequentVersionDefines -DOSMAJORVERSION=OSMajorVersion -DOSMINORVERSION=OSMinorVersion -DANSICPP -DDYNIX_C2 -DMetroLink
  #define StandardCppDefines	StandardDefines -D_SOCKET_VERSION=11 -DUnixCpp
  
  #ifdef ProjectRoot
  #define ManDirectoryRoot	ProjectRoot/**//catman
  #else
  #define ManDirectoryRoot	SystemManDirectory
  #endif
  #define XmanSearchPath		ManDirectoryRoot /* for X11R5 xman */
  
  /* 
   * Sequent configuration environment specific to building X11 and Motif.
   * This environment is only available when UseInstalled is not defined.
   * Therefore this environment is not used by customers using xmkmf.
   */
  
  #ifndef UseInstalled
  
  /* Product builds using local X11 and Motif trees */
  
  /*
   * Provide libraries needed by nonX programs in the X11 build tree.
   * These are not standard so the customer will be forced to add them to their
   * Imakefile SYS_LIBRARIES if needed.  An ABI program may not want or need them,
   * so we do not include them in the ExtraLibraries provided to customers
   * when UseInstalled is defined.  We add them here as a convenience when
   * building the entire X11 tree (at Sequent or the contractor).
   */
  #undef ExtraLibraries
  #define ExtraLibraries	-lsocket -lnsl
  
  /*
   * Sequent builds X11 and Motif in the same tree.
   * The Motif project files include the X11 project files.
   *
   * Later we may use the Local project files similer the the lynx.cf
   *
   * #define LocalTmplFile		<Motif.tmpl>
   * #define LocalRulesFile		<Motif.rules>
   */
  
  /* Try the Metro Link method. */
  
  #ifndef MetroLink
  #undef ProjectTmplFile
  #define ProjectTmplFile		<Motif.tmpl>
  #undef ProjectRulesFile
  #define ProjectRulesFile	<Motif.rules>
  #endif
  
  /*
   * Later change to Metro Link directory layout,
   * or allow $(TOP)/../motif21
   */
  
  /* Try the Metro Link method. */
  
  #ifndef MetroLink
  #define MTop $(TOP)/motif21
  #endif
  
  /*
   * Set the Program macros to be correct for the target machine.
   * This will avoid using any crosstools as hardwired strings
   * built into binaries that will run on the target machine.
   *
   * These macro names need to be ported from X11R5 to X11R6.
   */
  #define ArProgramBase	ar
  #define CppProgram	/lib/cpp
  #define CcProgram	cc
  #define RanlibProgram	ranlib
  
  /*
   * Build all the X11 debug libaries *_d.a for use by Sequent Service
   */
  
  /*
   * Set DebugLibDefault YES for Sequent to build all debug libs.
   * If we move this to generic code to *.tmpl files,
   * use the default code below that sets the default NO
   */
  
  #define DebugLibDefault		NO
  
  #ifndef DebugLibDefault
  #define DebugLibDefault		NO
  #endif
  
  #define DebugLibX11		DebugLibDefault	/* debugged X library */
  #define DebugLibXext		DebugLibDefault	/* debugged Xext library */
  #define DebugLibXau		DebugLibDefault	/* debugged auth library */
  #define DebugLibXdmcp		DebugLibDefault	/* debugged XDMCP library */
  #define DebugLibXmu		DebugLibDefault	/* debugged Xmu library */
  #define DebugLibXp              DebugLibDefault	/* debugged Xp library */
  #define DebugLibXt		DebugLibDefault	/* debugged toolkit library */
  #define DebugLibXa		DebugLibDefault	/* debugged audio library */
  #define DebugLibXaw		DebugLibDefault	/* debugged widget library */
  #define DebugLibXi		DebugLibDefault	/* debugged Xi library */
  #define DebugLibXtst		DebugLibDefault	/* debugged Xtst library */
  #define DebugLibICE		DebugLibDefault	/* debugged ICE library */
  #define DebugLibSM		DebugLibDefault	/* debugged SM library */
  #define DebugLibXkey		DebugLibDefault	/* debugged Xkey library */
  #define DebugLibFS		DebugLibDefault	/* debugged FS library */
  
  /*
   * Build all the Motif debug libaries *_d.a for use by Service
   */
  #define DebugLibXm		DebugLibDefault
  #define DebugLibMrm		DebugLibDefault
  #define DebugLibUil		DebugLibDefault
  
  /*
   * Build all the Adobe DPS debug libaries *_d.a for use by Service
   */
  #define DebugLibDps		DebugLibDefault
  
  #endif /* ! UseInstalled */
  
  /*
   * Sequent general make macros.
   * X11R6.5 should migrate these to Imake.tmpl.
   */
  
  XCOMM Sequent general make macros.
  
  #ifndef PackCmd
  #define PackCmd pack
  #endif
              PACK = PackCmd
  
  /*
   * Sequent unique make macros.  These will always be unique to Sequent.
   * We introduce them here in sequent.cf since cpp macros are set in sequent.cf.
   * We may later move them to sequentLib.tmpl.
   */
  
  XCOMM Sequent unique make macros.
  
       ADMINBASEDIR = AdminBaseDir
      MESSAGECATDIR = MessageCatDir
  
  /*
   * DPS default values (unique to sequent)
   */
  #ifndef PswrapCmd
  #define PswrapCmd     pswrap
  #endif
  
  #ifdef UseHidesymsLists
  
  #ifndef HidesymsCmd
  #define HidesymsCmd /usr/lib/hidesyms/hidesyms
  #endif
  #ifndef HsAcppCmd
  #define HsAcppCmd /lib/acpp
  #endif
  /*
   * When building in the X11 tree.
   * For shared libs,   hidesyms executes in a subdir.
   * For unshared libs, hidesyms executes in a subsubdir.
   * Therefore we add both of these to the acpp path:
   * ../../$(BUILDINCROOT)/lib/hidesyms:../$(BUILDINCROOT)/lib/hidesyms
   */
  #ifndef HsAcppLocalPath
  # define HsAcppLocalPath ../../$(BUILDINCROOT)/lib/hidesyms:../$(BUILDINCROOT)/lib/hidesyms
  #endif
  #ifndef HsAcppSystemPath
  # define HsAcppSystemPath /usr/lib/hidesyms
  #endif
  #ifndef HsAcppPath
  # ifdef UseInstalled
  # define HsAcppPath HsAcppSystemPath
  # else
  # define HsAcppPath HsAcppLocalPath:HsAcppSystemPath
  # endif /* UseInstalled */
  #endif
  /* 
   * note: -DABI_SHARED_OBJECT requires a temporary fix added to 
   * Xt/Error.c to provide missing _abi_* routines not in libc.so.1.
   * When the base adds those missing _abi_* to libc.so.1,
   * then the code in Xt/Error.c can be removed and the corresponding
   * symbols added to Xt/libXt.hs can be removed.
   */
  #ifndef HsAcppDefines
  #define HsAcppDefines -DABI_SHARED_OBJECT -D_SOCKET_VERSION=11 $(THREADS_DEFINES)
  #endif
  
  /*
   * For shared libs, hidesyms executes in a subdir,
   * therefore we add a -L../$(BUILDLIBDIR)
   */
  #ifndef LdPreLib
  #ifndef UseInstalled
  #define LdPreLib -L$(BUILDLIBDIR) -L../$(BUILDLIBDIR)
  #endif
  #endif
  
  XCOMM HIDESYMS is for filtering system library symbols.
  
           HIDESYMS = HidesymsCmd
         HSACPPPATH = HsAcppPath
          HSACPPCMD = HsAcppCmd
      HSACPPDEFINES = HsAcppDefines
             HSACPP = $(HSACPPCMD) -Y $(HSACPPPATH) $(HSACPPDEFINES)
              HSCMD = $(HIDESYMS) -z -p "$(HSACPP)"
  
  #endif /* UseHidesymsLists */
  
  #if OSMajorVersion >= 4
  #include <xorg.cf>
  #include <sequentLib.rules>	/* include after macros, before Motif.rules */
  #endif /* OSMajorVersion >= 4 */