Edit
IABSD.fr/xenocara/lib/libX11/nls/Makefile.in
matthieu
- lib/libX11/nls/Makefile.in
-
# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # -*- Makefile -*- # Rules for generating files using the C pre-processor # (Replaces CppFileTarget from Imake) srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/cpprules.in subdir = nls ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(install_sh) -d CONFIG_HEADER = $(top_builddir)/src/config.h \ $(top_builddir)/include/X11/XlibConf.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(x11localedir)" x11localeDATA_INSTALL = $(INSTALL_DATA) DATA = $(x11locale_DATA) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ APP_MAN_DIR = @APP_MAN_DIR@ APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BIGFONT_CFLAGS = @BIGFONT_CFLAGS@ BIGFONT_LIBS = @BIGFONT_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ FILE_MAN_DIR = @FILE_MAN_DIR@ FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ I18N_MODULE_LIBS = @I18N_MODULE_LIBS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ KEYSYMDEF = @KEYSYMDEF@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIB_MAN_DIR = @LIB_MAN_DIR@ LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ LINT = @LINT@ LINT_FALSE = @LINT_FALSE@ LINT_FLAGS = @LINT_FLAGS@ LINT_TRUE = @LINT_TRUE@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MALLOC_ZERO_CFLAGS = @MALLOC_ZERO_CFLAGS@ MANPAGES_FALSE = @MANPAGES_FALSE@ MANPAGES_TRUE = @MANPAGES_TRUE@ MISC_MAN_DIR = @MISC_MAN_DIR@ MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ OBJEXT = @OBJEXT@ OS2_FALSE = @OS2_FALSE@ OS2_TRUE = @OS2_TRUE@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ RANLIB = @RANLIB@ RAWCPP = @RAWCPP@ RAWCPPFLAGS = @RAWCPPFLAGS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ THRSTUBS_FALSE = @THRSTUBS_FALSE@ THRSTUBS_TRUE = @THRSTUBS_TRUE@ UDC_FALSE = @UDC_FALSE@ UDC_TRUE = @UDC_TRUE@ VERSION = @VERSION@ WCHAR32 = @WCHAR32@ X11_CFLAGS = @X11_CFLAGS@ X11_DATADIR = @X11_DATADIR@ X11_EXTRA_DEPS = @X11_EXTRA_DEPS@ X11_LIBDIR = @X11_LIBDIR@ X11_LIBS = @X11_LIBS@ X11_LOCALEDATADIR = @X11_LOCALEDATADIR@ X11_LOCALEDIR = @X11_LOCALEDIR@ X11_LOCALELIBDIR = @X11_LOCALELIBDIR@ XCB_FALSE = @XCB_FALSE@ XCB_TRUE = @XCB_TRUE@ XCMS_FALSE = @XCMS_FALSE@ XCMS_TRUE = @XCMS_TRUE@ XDMCP_CFLAGS = @XDMCP_CFLAGS@ XDMCP_LIBS = @XDMCP_LIBS@ XERRORDB = @XERRORDB@ XKBPROTO_CFLAGS = @XKBPROTO_CFLAGS@ XKBPROTO_LIBS = @XKBPROTO_LIBS@ XKBPROTO_REQUIRES = @XKBPROTO_REQUIRES@ XKB_FALSE = @XKB_FALSE@ XKB_TRUE = @XKB_TRUE@ XKEYSYMDB = @XKEYSYMDB@ XLIB_LOADABLE_I18N_FALSE = @XLIB_LOADABLE_I18N_FALSE@ XLIB_LOADABLE_I18N_TRUE = @XLIB_LOADABLE_I18N_TRUE@ XLOCALEDATADIR = @XLOCALEDATADIR@ XLOCALEDIR = @XLOCALEDIR@ XLOCALELIBDIR = @XLOCALELIBDIR@ XLOCALE_FALSE = @XLOCALE_FALSE@ XLOCALE_TRUE = @XLOCALE_TRUE@ XMALLOC_ZERO_CFLAGS = @XMALLOC_ZERO_CFLAGS@ XPROTO_CFLAGS = @XPROTO_CFLAGS@ XPROTO_LIBS = @XPROTO_LIBS@ XTHREADLIB = @XTHREADLIB@ XTHREADS = @XTHREADS@ XTHREAD_CFLAGS = @XTHREAD_CFLAGS@ XTMALLOC_ZERO_CFLAGS = @XTMALLOC_ZERO_CFLAGS@ XUSE_MTSAFE_API = @XUSE_MTSAFE_API@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ ac_ct_RANLIB = @ac_ct_RANLIB@ ac_ct_STRIP = @ac_ct_STRIP@ ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ x11localedir = $(X11_LOCALEDATADIR) EXTRA_DIST = locale.alias.pre compose.dir.pre locale.dir.pre x11locale_DATA = locale.alias locale.dir compose.dir CLEANFILES = \ locale.alias locale.alias.l1 locale.alias.l2 \ compose.dir compose.dir.l1 compose.dir.l2 \ locale.dir locale.dir.l1 locale.dir.l2 \ XLC_LOCALE SUBDIRS = \ armscii-8 \ C \ el_GR.UTF-8 \ en_US.UTF-8 \ georgian-academy \ georgian-ps \ ibm-cp1133 \ iscii-dev \ isiri-3342 \ iso8859-1 \ iso8859-10 \ iso8859-11 \ iso8859-13 \ iso8859-14 \ iso8859-15 \ iso8859-2 \ iso8859-3 \ iso8859-4 \ iso8859-5 \ iso8859-6 \ iso8859-7 \ iso8859-8 \ iso8859-9 \ iso8859-9e \ ja \ ja.JIS \ ja_JP.UTF-8 \ ja.S90 \ ja.SJIS \ ja.U90 \ ko \ koi8-c \ koi8-r \ koi8-u \ ko_KR.UTF-8 \ microsoft-cp1251 \ microsoft-cp1255 \ microsoft-cp1256 \ mulelao-1 \ nokhchi-1 \ pt_BR.UTF-8 \ tatar-cyr \ th_TH \ th_TH.UTF-8 \ tscii-0 \ vi_VN.tcvn \ vi_VN.viscii \ zh_CN \ zh_CN.gb18030 \ zh_CN.gbk \ zh_CN.UTF-8 \ zh_HK.big5 \ zh_HK.big5hkscs \ zh_HK.UTF-8 \ zh_TW \ zh_TW.big5 \ zh_TW.UTF-8 SED = sed SUFFIXES = .pre WCHAR32_FLAGS = -DWCHAR32=@WCHAR32@ CPP_FILES_FLAGS = $(WCHAR32_FLAGS) # Translate XCOMM into pound sign with sed, rather than passing -DXCOMM=XCOMM # to cpp, because that trick does not work on all ANSI C preprocessors. # Delete line numbers from the cpp output (-P is not portable, I guess). # Allow XCOMM to be preceded by whitespace and provide a means of generating # output lines with trailing backslashes. # Allow XHASH to always be substituted, even in cases where XCOMM isn't. CPP_SED_MAGIC = $(SED) -e '/^\# *[0-9][0-9]* *.*$$/d' \ -e '/^\#line *[0-9][0-9]* *.*$$/d' \ -e '/^[ ]*XCOMM$$/s/XCOMM/\#/' \ -e '/^[ ]*XCOMM[^a-zA-Z0-9_]/s/XCOMM/\#/' \ -e '/^[ ]*XHASH/s/XHASH/\#/' \ -e '/\@\@$$/s/\@\@$$/\\/' all: all-recursive .SUFFIXES: .SUFFIXES: .pre $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/cpprules.in $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign nls/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign nls/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-x11localeDATA: $(x11locale_DATA) @$(NORMAL_INSTALL) test -z "$(x11localedir)" || $(mkdir_p) "$(DESTDIR)$(x11localedir)" @list='$(x11locale_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(x11localeDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(x11localedir)/$$f'"; \ $(x11localeDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(x11localedir)/$$f"; \ done uninstall-x11localeDATA: @$(NORMAL_UNINSTALL) @list='$(x11locale_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(x11localedir)/$$f'"; \ rm -f "$(DESTDIR)$(x11localedir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(mkdir_p) $(distdir)/.. @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(x11localedir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-x11localeDATA install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-x11localeDATA uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ clean clean-generic clean-libtool clean-recursive ctags \ ctags-recursive distclean distclean-generic distclean-libtool \ distclean-recursive distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-exec install-exec-am install-info \ install-info-am install-man install-strip \ install-x11localeDATA installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am \ uninstall-x11localeDATA # Allow people to comment out lines by starting them with '##' .pre: $(SED) -e '/^\#\#/d' $< | $(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) | $(CPP_SED_MAGIC) > $@ locale.alias: locale.alias.pre $(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $(srcdir)/locale.alias.pre | $(CPP_SED_MAGIC) > locale.alias.l1 sed -e '/^[^#][^ ]*:/s/://' -e '/^[^#].*[ ].*:/d' \ < locale.alias.l1 > locale.alias.l2 cat locale.alias.l2 locale.alias.l1 > locale.alias compose.dir: compose.dir.pre $(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $(srcdir)/compose.dir.pre | $(CPP_SED_MAGIC) > compose.dir.l1 sed -e '/^[^#][^ ]*:/s/://' -e '/^[^#].*[ ].*:/d' \ < compose.dir.l1 > compose.dir.l2 cat compose.dir.l2 compose.dir.l1 > compose.dir locale.dir: locale.dir.pre $(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $(srcdir)/locale.dir.pre | $(CPP_SED_MAGIC) > locale.dir.l1 sed -e '/^[^#][^ ]*:/s/://' -e '/^[^#].*[ ].*:/d' \ < locale.dir.l1 > locale.dir.l2 cat locale.dir.l2 locale.dir.l1 > locale.dir # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: