Index: libffi/Makefile.am
===================================================================
--- libffi.orig/Makefile.am
+++ libffi/Makefile.am
@@ -179,14 +179,11 @@ endif
libffi_convenience_la_SOURCES = $(libffi_la_SOURCES)
nodist_libffi_convenience_la_SOURCES = $(nodist_libffi_la_SOURCES)
-AM_CFLAGS = -Wall -g -fexceptions
+AM_CFLAGS = -g
if FFI_DEBUG
# Build debug. Define FFI_DEBUG on the commandline so that, when building with
# MSVC, it can link against the debug CRT.
AM_CFLAGS += -DFFI_DEBUG
-else
-# Build opt.
-AM_CFLAGS += -O2
endif
libffi_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` $(LTLDFLAGS) $(AM_LTLDFLAGS)
Index: libffi/Makefile.in
===================================================================
--- libffi.orig/Makefile.in
+++ libffi/Makefile.in
@@ -66,8 +66,6 @@ target_triplet = @target@
# Build debug. Define FFI_DEBUG on the commandline so that, when building with
# MSVC, it can link against the debug CRT.
@FFI_DEBUG_TRUE@am__append_28 = -DFFI_DEBUG
-# Build opt.
-@FFI_DEBUG_FALSE@am__append_29 = -O2
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/doc/stamp-vti \
@@ -495,7 +493,7 @@ nodist_libffi_la_SOURCES = $(am__append_
$(am__append_27)
libffi_convenience_la_SOURCES = $(libffi_la_SOURCES)
nodist_libffi_convenience_la_SOURCES = $(nodist_libffi_la_SOURCES)
-AM_CFLAGS = -Wall -g -fexceptions $(am__append_28) $(am__append_29)
+AM_CFLAGS = -g $(am__append_28)
libffi_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` $(LTLDFLAGS) $(AM_LTLDFLAGS)
AM_CPPFLAGS = -I. -I$(top_srcdir)/include -Iinclude -I$(top_srcdir)/src
AM_CCASFLAGS = $(AM_CPPFLAGS)
Index: libffi/configure.ac
===================================================================
--- libffi.orig/configure.ac
+++ libffi/configure.ac
@@ -10,6 +10,8 @@ target_alias=${target_alias-$host_alias}
. ${srcdir}/configure.host
+AX_ENABLE_BUILDDIR
+
AM_INIT_AUTOMAKE
# The same as in boehm-gc and libstdc++. Have to borrow it from there.
@@ -34,6 +36,12 @@ AM_PROG_CC_C_O
AC_PROG_LIBTOOL
AC_CONFIG_MACRO_DIR([m4])
+AX_CC_MAXOPT
+AX_CFLAGS_WARN_ALL
+if test "x$GCC" = "xyes"; then
+ CFLAGS="$CFLAGS -fexceptions"
+fi
+
AM_MAINTAINER_MODE
AC_CHECK_HEADERS(sys/mman.h)
Index: libffi/m4/ax_cc_maxopt.m4
===================================================================
--- /dev/null
+++ libffi/m4/ax_cc_maxopt.m4
@@ -0,0 +1,180 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_cc_maxopt.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_CC_MAXOPT
+#
+# DESCRIPTION
+#
+# Try to turn on "good" C optimization flags for various compilers and
+# architectures, for some definition of "good". (In our case, good for
+# FFTW and hopefully for other scientific codes. Modify as needed.)
+#
+# The user can override the flags by setting the CFLAGS environment
+# variable. The user can also specify --enable-portable-binary in order to
+# disable any optimization flags that might result in a binary that only
+# runs on the host architecture.
+#
+# Note also that the flags assume that ANSI C aliasing rules are followed
+# by the code (e.g. for gcc's -fstrict-aliasing), and that floating-point
+# computations can be re-ordered as needed.
+#
+# Requires macros: AX_CHECK_COMPILER_FLAGS, AX_COMPILER_VENDOR,
+# AX_GCC_ARCHFLAG, AX_GCC_X86_CPUID.
+#
+# LICENSE
+#
+# Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+# Copyright (c) 2008 Matteo Frigo
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 11
+
+AC_DEFUN([AX_CC_MAXOPT],
+[
+AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AX_COMPILER_VENDOR])
+AC_REQUIRE([AC_CANONICAL_HOST])
+
+AC_ARG_ENABLE(portable-binary, [AS_HELP_STRING([--enable-portable-binary], [disable compiler optimizations that would produce unportable binaries])],
+ acx_maxopt_portable=$withval, acx_maxopt_portable=no)
+
+# Try to determine "good" native compiler flags if none specified via CFLAGS
+if test "$ac_test_CFLAGS" != "set"; then
+ CFLAGS=""
+ case $ax_cv_c_compiler_vendor in
+ dec) CFLAGS="-newc -w0 -O5 -ansi_alias -ansi_args -fp_reorder -tune host"
+ if test "x$acx_maxopt_portable" = xno; then
+ CFLAGS="$CFLAGS -arch host"
+ fi;;
+
+ sun) CFLAGS="-native -fast -xO5 -dalign"
+ if test "x$acx_maxopt_portable" = xyes; then
+ CFLAGS="$CFLAGS -xarch=generic"
+ fi;;
+
+ hp) CFLAGS="+Oall +Optrs_ansi +DSnative"
+ if test "x$acx_maxopt_portable" = xyes; then
+ CFLAGS="$CFLAGS +DAportable"
+ fi;;
+
+ ibm) if test "x$acx_maxopt_portable" = xno; then
+ xlc_opt="-qarch=auto -qtune=auto"
+ else
+ xlc_opt="-qtune=auto"
+ fi
+ AX_CHECK_COMPILER_FLAGS($xlc_opt,
+ CFLAGS="-O3 -qansialias -w $xlc_opt",
+ [CFLAGS="-O3 -qansialias -w"
+ echo "******************************************************"
+ echo "* You seem to have the IBM C compiler. It is *"
+ echo "* recommended for best performance that you use: *"
+ echo "* *"
+ echo "* CFLAGS=-O3 -qarch=xxx -qtune=xxx -qansialias -w *"
+ echo "* ^^^ ^^^ *"
+ echo "* where xxx is pwr2, pwr3, 604, or whatever kind of *"
+ echo "* CPU you have. (Set the CFLAGS environment var. *"
+ echo "* and re-run configure.) For more info, man cc. *"
+ echo "******************************************************"])
+ ;;
+
+ intel) CFLAGS="-O3 -ansi_alias"
+ if test "x$acx_maxopt_portable" = xno; then
+ icc_archflag=unknown
+ icc_flags=""
+ case $host_cpu in
+ i686*|x86_64*)
+ # icc accepts gcc assembly syntax, so these should work:
+ AX_GCC_X86_CPUID(0)
+ AX_GCC_X86_CPUID(1)
+ case $ax_cv_gcc_x86_cpuid_0 in # see AX_GCC_ARCHFLAG
+ *:756e6547:*:*) # Intel
+ case $ax_cv_gcc_x86_cpuid_1 in
+ *6a?:*[[234]]:*:*|*6[[789b]]?:*:*:*) icc_flags="-xK";;
+ *f3[[347]]:*:*:*|*f4[1347]:*:*:*) icc_flags="-xP -xN -xW -xK";;
+ *f??:*:*:*) icc_flags="-xN -xW -xK";;
+ esac ;;
+ esac ;;
+ esac
+ if test "x$icc_flags" != x; then
+ for flag in $icc_flags; do
+ AX_CHECK_COMPILER_FLAGS($flag, [icc_archflag=$flag; break])
+ done
+ fi
+ AC_MSG_CHECKING([for icc architecture flag])
+ AC_MSG_RESULT($icc_archflag)
+ if test "x$icc_archflag" != xunknown; then
+ CFLAGS="$CFLAGS $icc_archflag"
+ fi
+ fi
+ ;;
+
+ gnu)
+ # default optimization flags for gcc on all systems
+ CFLAGS="-O3 -fomit-frame-pointer"
+
+ # -malign-double for x86 systems
+ AX_CHECK_COMPILER_FLAGS(-malign-double, CFLAGS="$CFLAGS -malign-double")
+
+ # -fstrict-aliasing for gcc-2.95+
+ AX_CHECK_COMPILER_FLAGS(-fstrict-aliasing,
+ CFLAGS="$CFLAGS -fstrict-aliasing")
+
+ # note that we enable "unsafe" fp optimization with other compilers, too
+ AX_CHECK_COMPILER_FLAGS(-ffast-math, CFLAGS="$CFLAGS -ffast-math")
+
+ AX_GCC_ARCHFLAG($acx_maxopt_portable)
+ ;;
+ esac
+
+ if test -z "$CFLAGS"; then
+ echo ""
+ echo "********************************************************"
+ echo "* WARNING: Don't know the best CFLAGS for this system *"
+ echo "* Use ./configure CFLAGS=... to specify your own flags *"
+ echo "* (otherwise, a default of CFLAGS=-O3 will be used) *"
+ echo "********************************************************"
+ echo ""
+ CFLAGS="-O3"
+ fi
+
+ AX_CHECK_COMPILER_FLAGS($CFLAGS, [], [
+ echo ""
+ echo "********************************************************"
+ echo "* WARNING: The guessed CFLAGS don't seem to work with *"
+ echo "* your compiler. *"
+ echo "* Use ./configure CFLAGS=... to specify your own flags *"
+ echo "********************************************************"
+ echo ""
+ CFLAGS=""
+ ])
+
+fi
+])
Index: libffi/m4/ax_cflags_warn_all.m4
===================================================================
--- /dev/null
+++ libffi/m4/ax_cflags_warn_all.m4
@@ -0,0 +1,195 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_cflags_warn_all.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_CFLAGS_WARN_ALL [(shellvar [,default, [A/NA]])]
+# AX_CXXFLAGS_WARN_ALL [(shellvar [,default, [A/NA]])]
+# AX_FCFLAGS_WARN_ALL [(shellvar [,default, [A/NA]])]
+#
+# DESCRIPTION
+#
+# Try to find a compiler option that enables most reasonable warnings.
+#
+# For the GNU compiler it will be -Wall (and -ansi -pedantic) The result
+# is added to the shellvar being CFLAGS, CXXFLAGS, or FCFLAGS by default.
+#
+# Currently this macro knows about the GCC, Solaris, Digital Unix, AIX,
+# HP-UX, IRIX, NEC SX-5 (Super-UX 10), Cray J90 (Unicos 10.0.0.8), and
+# Intel compilers. For a given compiler, the Fortran flags are much more
+# experimental than their C equivalents.
+#
+# - $1 shell-variable-to-add-to : CFLAGS, CXXFLAGS, or FCFLAGS
+# - $2 add-value-if-not-found : nothing
+# - $3 action-if-found : add value to shellvariable
+# - $4 action-if-not-found : nothing
+#
+# LICENSE
+#
+# Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
+# Copyright (c) 2010 Rhys Ulerich <rhys.ulerich@gmail.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 10
+
+AC_DEFUN([AX_CFLAGS_WARN_ALL],[dnl
+AS_VAR_PUSHDEF([FLAGS],[CFLAGS])dnl
+AS_VAR_PUSHDEF([VAR],[ac_cv_cflags_warn_all])dnl
+AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings],
+VAR,[VAR="no, unknown"
+ AC_LANG_PUSH([C])
+ ac_save_[]FLAGS="$[]FLAGS"
+for ac_arg dnl
+in "-pedantic % -Wall" dnl GCC
+ "-xstrconst % -v" dnl Solaris C
+ "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix
+ "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX
+ "-ansi -ansiE % -fullwarn" dnl IRIX
+ "+ESlit % +w1" dnl HP-UX C
+ "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10)
+ "-h conform % -h msglevel 2" dnl Cray C (Unicos)
+ #
+do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
+done
+ FLAGS="$ac_save_[]FLAGS"
+ AC_LANG_POP([C])
+])
+case ".$VAR" in
+ .ok|.ok,*) m4_ifvaln($3,$3) ;;
+ .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[
+ AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])
+ m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;;
+ *) m4_ifvaln($3,$3,[
+ if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
+ then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
+ else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
+ m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
+ fi ]) ;;
+esac
+AS_VAR_POPDEF([VAR])dnl
+AS_VAR_POPDEF([FLAGS])dnl
+])
+
+dnl the only difference - the LANG selection... and the default FLAGS
+
+AC_DEFUN([AX_CXXFLAGS_WARN_ALL],[dnl
+AS_VAR_PUSHDEF([FLAGS],[CXXFLAGS])dnl
+AS_VAR_PUSHDEF([VAR],[ax_cv_cxxflags_warn_all])dnl
+AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings],
+VAR,[VAR="no, unknown"
+ AC_LANG_PUSH([C++])
+ ac_save_[]FLAGS="$[]FLAGS"
+for ac_arg dnl
+in "-pedantic % -Wall" dnl GCC
+ "-xstrconst % -v" dnl Solaris C
+ "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix
+ "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX
+ "-ansi -ansiE % -fullwarn" dnl IRIX
+ "+ESlit % +w1" dnl HP-UX C
+ "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10)
+ "-h conform % -h msglevel 2" dnl Cray C (Unicos)
+ #
+do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
+done
+ FLAGS="$ac_save_[]FLAGS"
+ AC_LANG_POP([C++])
+])
+case ".$VAR" in
+ .ok|.ok,*) m4_ifvaln($3,$3) ;;
+ .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[
+ AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])
+ m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;;
+ *) m4_ifvaln($3,$3,[
+ if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
+ then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
+ else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
+ m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
+ fi ]) ;;
+esac
+AS_VAR_POPDEF([VAR])dnl
+AS_VAR_POPDEF([FLAGS])dnl
+])
+
+dnl the only difference - the LANG selection... and the default FLAGS
+
+AC_DEFUN([AX_FCFLAGS_WARN_ALL],[dnl
+AS_VAR_PUSHDEF([FLAGS],[FCFLAGS])dnl
+AS_VAR_PUSHDEF([VAR],[ax_cv_fcflags_warn_all])dnl
+AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings],
+VAR,[VAR="no, unknown"
+ AC_LANG_PUSH([Fortran])
+ ac_save_[]FLAGS="$[]FLAGS"
+for ac_arg dnl
+in "-warn all % -warn all" dnl Intel
+ "-pedantic % -Wall" dnl GCC
+ "-xstrconst % -v" dnl Solaris C
+ "-std1 % -verbose -w0 -warnprotos" dnl Digital Unix
+ "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX
+ "-ansi -ansiE % -fullwarn" dnl IRIX
+ "+ESlit % +w1" dnl HP-UX C
+ "-Xc % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10)
+ "-h conform % -h msglevel 2" dnl Cray C (Unicos)
+ #
+do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
+done
+ FLAGS="$ac_save_[]FLAGS"
+ AC_LANG_POP([Fortran])
+])
+case ".$VAR" in
+ .ok|.ok,*) m4_ifvaln($3,$3) ;;
+ .|.no|.no,*) m4_ifvaln($4,$4,[m4_ifval($2,[
+ AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])
+ m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $2"])]) ;;
+ *) m4_ifvaln($3,$3,[
+ if echo " $[]m4_ifval($1,$1,FLAGS) " | grep " $VAR " 2>&1 >/dev/null
+ then AC_RUN_LOG([: m4_ifval($1,$1,FLAGS) does contain $VAR])
+ else AC_RUN_LOG([: m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"])
+ m4_ifval($1,$1,FLAGS)="$m4_ifval($1,$1,FLAGS) $VAR"
+ fi ]) ;;
+esac
+AS_VAR_POPDEF([VAR])dnl
+AS_VAR_POPDEF([FLAGS])dnl
+])
+
+dnl implementation tactics:
+dnl the for-argument contains a list of options. The first part of
+dnl these does only exist to detect the compiler - usually it is
+dnl a global option to enable -ansi or -extrawarnings. All other
+dnl compilers will fail about it. That was needed since a lot of
+dnl compilers will give false positives for some option-syntax
+dnl like -Woption or -Xoption as they think of it is a pass-through
+dnl to later compile stages or something. The "%" is used as a
+dnl delimiter. A non-option comment can be given after "%%" marks
+dnl which will be shown but not added to the respective C/CXXFLAGS.
Index: libffi/m4/ax_check_compiler_flags.m4
===================================================================
--- /dev/null
+++ libffi/m4/ax_check_compiler_flags.m4
@@ -0,0 +1,76 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_check_compiler_flags.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_CHECK_COMPILER_FLAGS(FLAGS, [ACTION-SUCCESS], [ACTION-FAILURE])
+#
+# DESCRIPTION
+#
+# Check whether the given compiler FLAGS work with the current language's
+# compiler, or whether they give an error. (Warnings, however, are
+# ignored.)
+#
+# ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on
+# success/failure.
+#
+# LICENSE
+#
+# Copyright (c) 2009 Steven G. Johnson <stevenj@alum.mit.edu>
+# Copyright (c) 2009 Matteo Frigo
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 9
+
+AC_DEFUN([AX_CHECK_COMPILER_FLAGS],
+[AC_PREREQ(2.59) dnl for _AC_LANG_PREFIX
+AC_MSG_CHECKING([whether _AC_LANG compiler accepts $1])
+dnl Some hackery here since AC_CACHE_VAL can't handle a non-literal varname:
+AS_LITERAL_IF([$1],
+ [AC_CACHE_VAL(AS_TR_SH(ax_cv_[]_AC_LANG_ABBREV[]_flags_[$1]), [
+ ax_save_FLAGS=$[]_AC_LANG_PREFIX[]FLAGS
+ _AC_LANG_PREFIX[]FLAGS="$1"
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
+ AS_TR_SH(ax_cv_[]_AC_LANG_ABBREV[]_flags_[$1])=yes,
+ AS_TR_SH(ax_cv_[]_AC_LANG_ABBREV[]_flags_[$1])=no)
+ _AC_LANG_PREFIX[]FLAGS=$ax_save_FLAGS])],
+ [ax_save_FLAGS=$[]_AC_LANG_PREFIX[]FLAGS
+ _AC_LANG_PREFIX[]FLAGS="$1"
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
+ eval AS_TR_SH(ax_cv_[]_AC_LANG_ABBREV[]_flags_[$1])=yes,
+ eval AS_TR_SH(ax_cv_[]_AC_LANG_ABBREV[]_flags_[$1])=no)
+ _AC_LANG_PREFIX[]FLAGS=$ax_save_FLAGS])
+eval ax_check_compiler_flags=$AS_TR_SH(ax_cv_[]_AC_LANG_ABBREV[]_flags_[$1])
+AC_MSG_RESULT($ax_check_compiler_flags)
+if test "x$ax_check_compiler_flags" = xyes; then
+ m4_default([$2], :)
+else
+ m4_default([$3], :)
+fi
+])dnl AX_CHECK_COMPILER_FLAGS
Index: libffi/m4/ax_compiler_vendor.m4
===================================================================
--- /dev/null
+++ libffi/m4/ax_compiler_vendor.m4
@@ -0,0 +1,63 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_compiler_vendor.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_COMPILER_VENDOR
+#
+# DESCRIPTION
+#
+# Determine the vendor of the C/C++ compiler, e.g., gnu, intel, ibm, sun,
+# hp, borland, comeau, dec, cray, kai, lcc, metrowerks, sgi, microsoft,
+# watcom, etc. The vendor is returned in the cache variable
+# $ax_cv_c_compiler_vendor for C and $ax_cv_cxx_compiler_vendor for C++.
+#
+# LICENSE
+#
+# Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+# Copyright (c) 2008 Matteo Frigo
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 9
+
+AC_DEFUN([AX_COMPILER_VENDOR],
+[
+AC_CACHE_CHECK([for _AC_LANG compiler vendor], ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor,
+ [ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor=unknown
+ # note: don't check for gcc first since some other compilers define __GNUC__
+ for ventest in intel:__ICC,__ECC,__INTEL_COMPILER ibm:__xlc__,__xlC__,__IBMC__,__IBMCPP__ pathscale:__PATHCC__,__PATHSCALE__ clang:__clang__ gnu:__GNUC__ sun:__SUNPRO_C,__SUNPRO_CC hp:__HP_cc,__HP_aCC dec:__DECC,__DECCXX,__DECC_VER,__DECCXX_VER borland:__BORLANDC__,__TURBOC__ comeau:__COMO__ cray:_CRAYC kai:__KCC lcc:__LCC__ metrowerks:__MWERKS__ sgi:__sgi,sgi microsoft:_MSC_VER watcom:__WATCOMC__ portland:__PGI; do
+ vencpp="defined("`echo $ventest | cut -d: -f2 | sed 's/,/) || defined(/g'`")"
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM(,[
+#if !($vencpp)
+ thisisanerror;
+#endif
+])], [ax_cv_]_AC_LANG_ABBREV[_compiler_vendor=`echo $ventest | cut -d: -f1`; break])
+ done
+ ])
+])
Index: libffi/m4/ax_configure_args.m4
===================================================================
--- /dev/null
+++ libffi/m4/ax_configure_args.m4
@@ -0,0 +1,70 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_configure_args.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_CONFIGURE_ARGS
+#
+# DESCRIPTION
+#
+# Helper macro for AX_ENABLE_BUILDDIR.
+#
+# The traditional way of starting a subdir-configure is running the script
+# with ${1+"$@"} but since autoconf 2.60 this is broken. Instead we have
+# to rely on eval'ing $ac_configure_args however some old autoconf
+# versions do not provide that. To ensure maximum portability of autoconf
+# extension macros this helper can be AC_REQUIRE'd so that
+# $ac_configure_args will alsways be present.
+#
+# Sadly, the traditional "exec $SHELL" of the enable_builddir macros is
+# spoiled now and must be replaced by "eval + exit $?".
+#
+# Example:
+#
+# AC_DEFUN([AX_ENABLE_SUBDIR],[dnl
+# AC_REQUIRE([AX_CONFIGURE_ARGS])dnl
+# eval $SHELL $ac_configure_args || exit $?
+# ...])
+#
+# LICENSE
+#
+# Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 9
+
+AC_DEFUN([AX_CONFIGURE_ARGS],[
+ # [$]@ is unsable in 2.60+ but earlier autoconf had no ac_configure_args
+ if test "${ac_configure_args+set}" != "set" ; then
+ ac_configure_args=
+ for ac_arg in ${1+"[$]@"}; do
+ ac_configure_args="$ac_configure_args '$ac_arg'"
+ done
+ fi
+])
Index: libffi/m4/ax_enable_builddir.m4
===================================================================
--- /dev/null
+++ libffi/m4/ax_enable_builddir.m4
@@ -0,0 +1,300 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_enable_builddir.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_ENABLE_BUILDDIR [(dirstring-or-command [,Makefile.mk [,-all]])]
+#
+# DESCRIPTION
+#
+# If the current configure was run within the srcdir then we move all
+# configure-files into a subdir and let the configure steps continue
+# there. We provide an option --disable-builddir to suppress the move into
+# a separate builddir.
+#
+# Defaults:
+#
+# $1 = $host (overridden with $HOST)
+# $2 = Makefile.mk
+# $3 = -all
+#
+# This macro must be called before AM_INIT_AUTOMAKE. It creates a default
+# toplevel srcdir Makefile from the information found in the created
+# toplevel builddir Makefile. It just copies the variables and
+# rule-targets, each extended with a default rule-execution that recurses
+# into the build directory of the current "HOST". You can override the
+# auto-dection through `config.guess` and build-time of course, as in
+#
+# make HOST=i386-mingw-cross
+#
+# which can of course set at configure time as well using
+#
+# configure --host=i386-mingw-cross
+#
+# After the default has been created, additional rules can be appended
+# that will not just recurse into the subdirectories and only ever exist
+# in the srcdir toplevel makefile - these parts are read from the $2 =
+# Makefile.mk file
+#
+# The automatic rules are usually scanning the toplevel Makefile for lines
+# like '#### $host |$builddir' to recognize the place where to recurse
+# into. Usually, the last one is the only one used. However, almost all
+# targets have an additional "*-all" rule which makes the script to
+# recurse into _all_ variants of the current HOST (!!) setting. The "-all"
+# suffix can be overriden for the macro as well.
+#
+# a special rule is only given for things like "dist" that will copy the
+# tarball from the builddir to the sourcedir (or $(PUB)) for reason of
+# convenience.
+#
+# LICENSE
+#
+# Copyright (c) 2009 Guido U. Draheim <guidod@gmx.de>
+# Copyright (c) 2009 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 22
+
+AC_DEFUN([AX_ENABLE_BUILDDIR],[
+AC_REQUIRE([AC_CANONICAL_HOST])[]dnl
+AC_REQUIRE([AX_CONFIGURE_ARGS])[]dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])[]dnl
+AC_BEFORE([$0],[AM_INIT_AUTOMAKE])dnl
+AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
+AS_VAR_PUSHDEF([AUX],[ax_enable_builddir_auxdir])dnl
+AS_VAR_PUSHDEF([SED],[ax_enable_builddir_sed])dnl
+SUB="."
+AC_ARG_ENABLE([builddir], AS_HELP_STRING(
+ [--disable-builddir],[disable automatic build in subdir of sources])
+ ,[SUB="$enableval"], [SUB="auto"])
+if test ".$ac_srcdir_defaulted" != ".no" ; then
+if test ".$srcdir" = ".." ; then
+ if test -f config.status ; then
+ AC_MSG_NOTICE(toplevel srcdir already configured... skipping subdir build)
+ else
+ test ".$SUB" = "." && SUB="."
+ test ".$SUB" = ".no" && SUB="."
+ test ".$TARGET" = "." && TARGET="$target"
+ test ".$SUB" = ".auto" && SUB="m4_ifval([$1], [$1],[$TARGET])"
+ if test ".$SUB" != ".." ; then # we know where to go and
+ AS_MKDIR_P([$SUB])
+ echo __.$SUB.__ > $SUB/conftest.tmp
+ cd $SUB
+ if grep __.$SUB.__ conftest.tmp >/dev/null 2>/dev/null ; then
+ rm conftest.tmp
+ AC_MSG_RESULT([continue configure in default builddir "./$SUB"])
+ else
+ AC_MSG_ERROR([could not change to default builddir "./$SUB"])
+ fi
+ srcdir=`echo "$SUB" |
+ sed -e 's,^\./,,;s,[[^/]]$,&/,;s,[[^/]]*/,../,g;s,[[/]]$,,;'`
+ # going to restart from subdirectory location
+ test -f $srcdir/config.log && mv $srcdir/config.log .
+ test -f $srcdir/confdefs.h && mv $srcdir/confdefs.h .
+ test -f $srcdir/conftest.log && mv $srcdir/conftest.log .
+ test -f $srcdir/$cache_file && mv $srcdir/$cache_file .
+ AC_MSG_RESULT(....exec $SHELL $srcdir/[$]0 "--srcdir=$srcdir" "--enable-builddir=$SUB" ${1+"[$]@"})
+ case "[$]0" in # restart
+ [/\\]*) eval $SHELL "'[$]0'" "'--srcdir=$srcdir'" "'--enable-builddir=$SUB'" $ac_configure_args ;;
+ *) eval $SHELL "'$srcdir/[$]0'" "'--srcdir=$srcdir'" "'--enable-builddir=$SUB'" $ac_configure_args ;;
+ esac ; exit $?
+ fi
+ fi
+fi fi
+test ".$SUB" = ".auto" && SUB="."
+dnl ac_path_prog uses "set dummy" to override $@ which would defeat the "exec"
+AC_PATH_PROG(SED,gsed sed, sed)
+AUX="$am_aux_dir"
+AS_VAR_POPDEF([SED])dnl
+AS_VAR_POPDEF([AUX])dnl
+AS_VAR_POPDEF([SUB])dnl
+AC_CONFIG_COMMANDS([buildir],[dnl .............. config.status ..............
+AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
+AS_VAR_PUSHDEF([TOP],[top_srcdir])dnl
+AS_VAR_PUSHDEF([SRC],[ac_top_srcdir])dnl
+AS_VAR_PUSHDEF([AUX],[ax_enable_builddir_auxdir])dnl
+AS_VAR_PUSHDEF([SED],[ax_enable_builddir_sed])dnl
+pushdef([END],[Makefile.mk])dnl
+pushdef([_ALL],[ifelse([$3],,[-all],[$3])])dnl
+ SRC="$ax_enable_builddir_srcdir"
+ if test ".$SUB" = ".." ; then
+ if test -f "$TOP/Makefile" ; then
+ AC_MSG_NOTICE([skipping TOP/Makefile - left untouched])
+ else
+ AC_MSG_NOTICE([skipping TOP/Makefile - not created])
+ fi
+ else
+ if test -f "$SRC/Makefile" ; then
+ a=`grep "^VERSION " "$SRC/Makefile"` ; b=`grep "^VERSION " Makefile`
+ test "$a" != "$b" && rm "$SRC/Makefile"
+ fi
+ if test -f "$SRC/Makefile" ; then
+ echo "$SRC/Makefile : $SRC/Makefile.in" > $tmp/conftemp.mk
+ echo " []@ echo 'REMOVED,,,' >\$[]@" >> $tmp/conftemp.mk
+ eval "${MAKE-make} -f $tmp/conftemp.mk 2>/dev/null >/dev/null"
+ if grep '^REMOVED,,,' "$SRC/Makefile" >/dev/null
+ then rm $SRC/Makefile ; fi
+ cp $tmp/conftemp.mk $SRC/makefiles.mk~ ## DEBUGGING
+ fi
+ if test ! -f "$SRC/Makefile" ; then
+ AC_MSG_NOTICE([create TOP/Makefile guessed from local Makefile])
+ x='`' ; cat >$tmp/conftemp.sed <<_EOF
+/^\$/n
+x
+/^\$/bS
+x
+/\\\\\$/{H;d;}
+{H;s/.*//;x;}
+bM
+:S
+x
+/\\\\\$/{h;d;}
+{h;s/.*//;x;}
+:M
+s/\\(\\n\\) /\\1 /g
+/^ /d
+/^[[ ]]*[[\\#]]/d
+/^VPATH *=/d
+s/^srcdir *=.*/srcdir = ./
+s/^top_srcdir *=.*/top_srcdir = ./
+/[[:=]]/!d
+/^\\./d
+dnl Now handle rules (i.e. lines containing ":" but not " = ").
+/ = /b
+/ .= /b
+/:/!b
+s/:.*/:/
+s/ / /g
+s/ \\([[a-z]][[a-z-]]*[[a-zA-Z0-9]]\\)\\([[ :]]\\)/ \\1 \\1[]_ALL\\2/g
+s/^\\([[a-z]][[a-z-]]*[[a-zA-Z0-9]]\\)\\([[ :]]\\)/\\1 \\1[]_ALL\\2/
+s/ / /g
+/^all all[]_ALL[[ :]]/i\\
+all-configured : all[]_ALL
+dnl dist-all exists... and would make for dist-all-all
+s/ [[a-zA-Z0-9-]]*[]_ALL [[a-zA-Z0-9-]]*[]_ALL[]_ALL//g
+/[]_ALL[]_ALL/d
+a\\
+ @ HOST="\$(HOST)\" \\\\\\
+ ; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
+ ; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+ ; use=$x basename "\$\@" _ALL $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
+ ; echo "MAKE \$\$HOST : \$\$n * \$\@"; if test "\$\$n" -eq "0" ; then : \\\\\\
+ ; BUILD=$x grep "^####.*|" Makefile |tail -1| sed -e 's/.*|//' $x ; fi \\\\\\
+ ; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
+ ; test "\$\$use" = "\$\@" && BUILD=$x echo "\$\$BUILD" | tail -1 $x \\\\\\
+ ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+ ; (cd "\$\$i" && test ! -f configure && \$(MAKE) \$\$use) || exit; done
+dnl special rule add-on: "dist" copies the tarball to $(PUB). (source tree)
+/dist[]_ALL *:/a\\
+ @ HOST="\$(HOST)\" \\\\\\
+ ; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
+ ; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+ ; found=$x echo \$\$BUILD | wc -w $x \\\\\\
+ ; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).tar.*" \\\\\\
+ ; if test "\$\$found" -eq "0" ; then : \\\\\\
+ ; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
+ ; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+ ; for f in \$\$i/\$(PACKAGE)-\$(VERSION).tar.* \\\\\\
+ ; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
+dnl special rule add-on: "dist-foo" copies all the archives to $(PUB). (source tree)
+/dist-[[a-zA-Z0-9]]*[]_ALL *:/a\\
+ @ HOST="\$(HOST)\" \\\\\\
+ ; test ".\$\$HOST" = "." && HOST=$x sh ./config.guess $x \\\\\\
+ ; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
+ ; found=$x echo \$\$BUILD | wc -w $x \\\\\\
+ ; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).*" \\\\\\
+ ; if test "\$\$found" -eq "0" ; then : \\\\\\
+ ; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
+ ; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+ ; for f in \$\$i/\$(PACKAGE)-\$(VERSION).* \\\\\\
+ ; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
+dnl special rule add-on: "distclean" removes all local builddirs completely
+/distclean[]_ALL *:/a\\
+ @ HOST="\$(HOST)\" \\\\\\
+ ; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
+ ; BUILD=$x grep "^#### .*|" Makefile | sed -e 's/.*|//' $x \\\\\\
+ ; use=$x basename "\$\@" _ALL $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
+ ; echo "MAKE \$\$HOST : \$\$n * \$\@ (all local builds)" \\\\\\
+ ; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
+ ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+ ; echo "# rm -r \$\$i"; done ; echo "# (sleep 3)" ; sleep 3 \\\\\\
+ ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
+ ; echo "\$\$i" | grep "^/" > /dev/null && continue \\\\\\
+ ; echo "\$\$i" | grep "^../" > /dev/null && continue \\\\\\
+ ; echo "rm -r \$\$i"; (rm -r "\$\$i") ; done ; rm Makefile
+_EOF
+ cp "$tmp/conftemp.sed" "$SRC/makefile.sed~" ## DEBUGGING
+ $SED -f $tmp/conftemp.sed Makefile >$SRC/Makefile
+ if test -f "$SRC/m4_ifval([$2],[$2],[END])" ; then
+ AC_MSG_NOTICE([extend TOP/Makefile with TOP/m4_ifval([$2],[$2],[END])])
+ cat $SRC/END >>$SRC/Makefile
+ fi ; xxxx="####"
+ echo "$xxxx CONFIGURATIONS FOR TOPLEVEL MAKEFILE: " >>$SRC/Makefile
+ # sanity check
+ if grep '^; echo "MAKE ' $SRC/Makefile >/dev/null ; then
+ AC_MSG_NOTICE([buggy sed found - it deletes tab in "a" text parts])
+ $SED -e '/^@ HOST=/s/^/ /' -e '/^; /s/^/ /' $SRC/Makefile \
+ >$SRC/Makefile~
+ (test -s $SRC/Makefile~ && mv $SRC/Makefile~ $SRC/Makefile) 2>/dev/null
+ fi
+ else
+ xxxx="\\#\\#\\#\\#"
+ # echo "/^$xxxx *$ax_enable_builddir_host /d" >$tmp/conftemp.sed
+ echo "s!^$xxxx [[^|]]* | *$SUB *\$!$xxxx ...... $SUB!" >$tmp/conftemp.sed
+ $SED -f "$tmp/conftemp.sed" "$SRC/Makefile" >$tmp/mkfile.tmp
+ cp "$tmp/conftemp.sed" "$SRC/makefiles.sed~" ## DEBUGGING
+ cp "$tmp/mkfile.tmp" "$SRC/makefiles.out~" ## DEBUGGING
+ if cmp -s "$SRC/Makefile" "$tmp/mkfile.tmp" 2>/dev/null ; then
+ AC_MSG_NOTICE([keeping TOP/Makefile from earlier configure])
+ rm "$tmp/mkfile.tmp"
+ else
+ AC_MSG_NOTICE([reusing TOP/Makefile from earlier configure])
+ mv "$tmp/mkfile.tmp" "$SRC/Makefile"
+ fi
+ fi
+ AC_MSG_NOTICE([build in $SUB (HOST=$ax_enable_builddir_host)])
+ xxxx="####"
+ echo "$xxxx" "$ax_enable_builddir_host" "|$SUB" >>$SRC/Makefile
+ fi
+popdef([END])dnl
+AS_VAR_POPDEF([SED])dnl
+AS_VAR_POPDEF([AUX])dnl
+AS_VAR_POPDEF([SRC])dnl
+AS_VAR_POPDEF([TOP])dnl
+AS_VAR_POPDEF([SUB])dnl
+],[dnl
+ax_enable_builddir_srcdir="$srcdir" # $srcdir
+ax_enable_builddir_host="$HOST" # $HOST / $host
+ax_enable_builddir_version="$VERSION" # $VERSION
+ax_enable_builddir_package="$PACKAGE" # $PACKAGE
+ax_enable_builddir_auxdir="$ax_enable_builddir_auxdir" # $AUX
+ax_enable_builddir_sed="$ax_enable_builddir_sed" # $SED
+ax_enable_builddir="$ax_enable_builddir" # $SUB
+])dnl
+])
Index: libffi/m4/ax_gcc_archflag.m4
===================================================================
--- /dev/null
+++ libffi/m4/ax_gcc_archflag.m4
@@ -0,0 +1,215 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_gcc_archflag.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_GCC_ARCHFLAG([PORTABLE?], [ACTION-SUCCESS], [ACTION-FAILURE])
+#
+# DESCRIPTION
+#
+# This macro tries to guess the "native" arch corresponding to the target
+# architecture for use with gcc's -march=arch or -mtune=arch flags. If
+# found, the cache variable $ax_cv_gcc_archflag is set to this flag and
+# ACTION-SUCCESS is executed; otherwise $ax_cv_gcc_archflag is is set to
+# "unknown" and ACTION-FAILURE is executed. The default ACTION-SUCCESS is
+# to add $ax_cv_gcc_archflag to the end of $CFLAGS.
+#
+# PORTABLE? should be either [yes] (default) or [no]. In the former case,
+# the flag is set to -mtune (or equivalent) so that the architecture is
+# only used for tuning, but the instruction set used is still portable. In
+# the latter case, the flag is set to -march (or equivalent) so that
+# architecture-specific instructions are enabled.
+#
+# The user can specify --with-gcc-arch=<arch> in order to override the
+# macro's choice of architecture, or --without-gcc-arch to disable this.
+#
+# When cross-compiling, or if $CC is not gcc, then ACTION-FAILURE is
+# called unless the user specified --with-gcc-arch manually.
+#
+# Requires macros: AX_CHECK_COMPILER_FLAGS, AX_GCC_X86_CPUID
+#
+# (The main emphasis here is on recent CPUs, on the principle that doing
+# high-performance computing on old hardware is uncommon.)
+#
+# LICENSE
+#
+# Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+# Copyright (c) 2008 Matteo Frigo
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 8
+
+AC_DEFUN([AX_GCC_ARCHFLAG],
+[AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_CANONICAL_HOST])
+
+AC_ARG_WITH(gcc-arch, [AS_HELP_STRING([--with-gcc-arch=<arch>], [use architecture <arch> for gcc -march/-mtune, instead of guessing])],
+ ax_gcc_arch=$withval, ax_gcc_arch=yes)
+
+AC_MSG_CHECKING([for gcc architecture flag])
+AC_MSG_RESULT([])
+AC_CACHE_VAL(ax_cv_gcc_archflag,
+[
+ax_cv_gcc_archflag="unknown"
+
+if test "$GCC" = yes; then
+
+if test "x$ax_gcc_arch" = xyes; then
+ax_gcc_arch=""
+if test "$cross_compiling" = no; then
+case $host_cpu in
+ i[[3456]]86*|x86_64*) # use cpuid codes, in part from x86info-1.7 by D. Jones
+ AX_GCC_X86_CPUID(0)
+ AX_GCC_X86_CPUID(1)
+ case $ax_cv_gcc_x86_cpuid_0 in
+ *:756e6547:*:*) # Intel
+ case $ax_cv_gcc_x86_cpuid_1 in
+ *5[[48]]?:*:*:*) ax_gcc_arch="pentium-mmx pentium" ;;
+ *5??:*:*:*) ax_gcc_arch=pentium ;;
+ *6[[3456]]?:*:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
+ *6a?:*[[01]]:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
+ *6a?:*[[234]]:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
+ *6[[9d]]?:*:*:*) ax_gcc_arch="pentium-m pentium3 pentiumpro" ;;
+ *6[[78b]]?:*:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
+ *6??:*:*:*) ax_gcc_arch=pentiumpro ;;
+ *f3[[347]]:*:*:*|*f4[1347]:*:*:*)
+ case $host_cpu in
+ x86_64*) ax_gcc_arch="nocona pentium4 pentiumpro" ;;
+ *) ax_gcc_arch="prescott pentium4 pentiumpro" ;;
+ esac ;;
+ *f??:*:*:*) ax_gcc_arch="pentium4 pentiumpro";;
+ esac ;;
+ *:68747541:*:*) # AMD
+ case $ax_cv_gcc_x86_cpuid_1 in
+ *5[[67]]?:*:*:*) ax_gcc_arch=k6 ;;
+ *5[[8d]]?:*:*:*) ax_gcc_arch="k6-2 k6" ;;
+ *5[[9]]?:*:*:*) ax_gcc_arch="k6-3 k6" ;;
+ *60?:*:*:*) ax_gcc_arch=k7 ;;
+ *6[[12]]?:*:*:*) ax_gcc_arch="athlon k7" ;;
+ *6[[34]]?:*:*:*) ax_gcc_arch="athlon-tbird k7" ;;
+ *67?:*:*:*) ax_gcc_arch="athlon-4 athlon k7" ;;
+ *6[[68a]]?:*:*:*)
+ AX_GCC_X86_CPUID(0x80000006) # L2 cache size
+ case $ax_cv_gcc_x86_cpuid_0x80000006 in
+ *:*:*[[1-9a-f]]??????:*) # (L2 = ecx >> 16) >= 256
+ ax_gcc_arch="athlon-xp athlon-4 athlon k7" ;;
+ *) ax_gcc_arch="athlon-4 athlon k7" ;;
+ esac ;;
+ *f[[4cef8b]]?:*:*:*) ax_gcc_arch="athlon64 k8" ;;
+ *f5?:*:*:*) ax_gcc_arch="opteron k8" ;;
+ *f7?:*:*:*) ax_gcc_arch="athlon-fx opteron k8" ;;
+ *f??:*:*:*) ax_gcc_arch="k8" ;;
+ esac ;;
+ *:746e6543:*:*) # IDT
+ case $ax_cv_gcc_x86_cpuid_1 in
+ *54?:*:*:*) ax_gcc_arch=winchip-c6 ;;
+ *58?:*:*:*) ax_gcc_arch=winchip2 ;;
+ *6[[78]]?:*:*:*) ax_gcc_arch=c3 ;;
+ *69?:*:*:*) ax_gcc_arch="c3-2 c3" ;;
+ esac ;;
+ esac
+ if test x"$ax_gcc_arch" = x; then # fallback
+ case $host_cpu in
+ i586*) ax_gcc_arch=pentium ;;
+ i686*) ax_gcc_arch=pentiumpro ;;
+ esac
+ fi
+ ;;
+
+ sparc*)
+ AC_PATH_PROG([PRTDIAG], [prtdiag], [prtdiag], [$PATH:/usr/platform/`uname -i`/sbin/:/usr/platform/`uname -m`/sbin/])
+ cputype=`(((grep cpu /proc/cpuinfo | cut -d: -f2) ; ($PRTDIAG -v |grep -i sparc) ; grep -i cpu /var/run/dmesg.boot ) | head -n 1) 2> /dev/null`
+ cputype=`echo "$cputype" | tr -d ' -' |tr $as_cr_LETTERS $as_cr_letters`
+ case $cputype in
+ *ultrasparciv*) ax_gcc_arch="ultrasparc4 ultrasparc3 ultrasparc v9" ;;
+ *ultrasparciii*) ax_gcc_arch="ultrasparc3 ultrasparc v9" ;;
+ *ultrasparc*) ax_gcc_arch="ultrasparc v9" ;;
+ *supersparc*|*tms390z5[[05]]*) ax_gcc_arch="supersparc v8" ;;
+ *hypersparc*|*rt62[[056]]*) ax_gcc_arch="hypersparc v8" ;;
+ *cypress*) ax_gcc_arch=cypress ;;
+ esac ;;
+
+ alphaev5) ax_gcc_arch=ev5 ;;
+ alphaev56) ax_gcc_arch=ev56 ;;
+ alphapca56) ax_gcc_arch="pca56 ev56" ;;
+ alphapca57) ax_gcc_arch="pca57 pca56 ev56" ;;
+ alphaev6) ax_gcc_arch=ev6 ;;
+ alphaev67) ax_gcc_arch=ev67 ;;
+ alphaev68) ax_gcc_arch="ev68 ev67" ;;
+ alphaev69) ax_gcc_arch="ev69 ev68 ev67" ;;
+ alphaev7) ax_gcc_arch="ev7 ev69 ev68 ev67" ;;
+ alphaev79) ax_gcc_arch="ev79 ev7 ev69 ev68 ev67" ;;
+
+ powerpc*)
+ cputype=`((grep cpu /proc/cpuinfo | head -n 1 | cut -d: -f2 | cut -d, -f1 | sed 's/ //g') ; /usr/bin/machine ; /bin/machine; grep CPU /var/run/dmesg.boot | head -n 1 | cut -d" " -f2) 2> /dev/null`
+ cputype=`echo $cputype | sed -e 's/ppc//g;s/ *//g'`
+ case $cputype in
+ *750*) ax_gcc_arch="750 G3" ;;
+ *740[[0-9]]*) ax_gcc_arch="$cputype 7400 G4" ;;
+ *74[[4-5]][[0-9]]*) ax_gcc_arch="$cputype 7450 G4" ;;
+ *74[[0-9]][[0-9]]*) ax_gcc_arch="$cputype G4" ;;
+ *970*) ax_gcc_arch="970 G5 power4";;
+ *POWER4*|*power4*|*gq*) ax_gcc_arch="power4 970";;
+ *POWER5*|*power5*|*gr*|*gs*) ax_gcc_arch="power5 power4 970";;
+ 603ev|8240) ax_gcc_arch="$cputype 603e 603";;
+ *) ax_gcc_arch=$cputype ;;
+ esac
+ ax_gcc_arch="$ax_gcc_arch powerpc"
+ ;;
+esac
+fi # not cross-compiling
+fi # guess arch
+
+if test "x$ax_gcc_arch" != x -a "x$ax_gcc_arch" != xno; then
+for arch in $ax_gcc_arch; do
+ if test "x[]m4_default([$1],yes)" = xyes; then # if we require portable code
+ flags="-mtune=$arch"
+ # -mcpu=$arch and m$arch generate nonportable code on every arch except
+ # x86. And some other arches (e.g. Alpha) don't accept -mtune. Grrr.
+ case $host_cpu in i*86|x86_64*) flags="$flags -mcpu=$arch -m$arch";; esac
+ else
+ flags="-march=$arch -mcpu=$arch -m$arch"
+ fi
+ for flag in $flags; do
+ AX_CHECK_COMPILER_FLAGS($flag, [ax_cv_gcc_archflag=$flag; break])
+ done
+ test "x$ax_cv_gcc_archflag" = xunknown || break
+done
+fi
+
+fi # $GCC=yes
+])
+AC_MSG_CHECKING([for gcc architecture flag])
+AC_MSG_RESULT($ax_cv_gcc_archflag)
+if test "x$ax_cv_gcc_archflag" = xunknown; then
+ m4_default([$3],:)
+else
+ m4_default([$2], [CFLAGS="$CFLAGS $ax_cv_gcc_archflag"])
+fi
+])
Index: libffi/m4/ax_gcc_x86_cpuid.m4
===================================================================
--- /dev/null
+++ libffi/m4/ax_gcc_x86_cpuid.m4
@@ -0,0 +1,79 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_gcc_x86_cpuid.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_GCC_X86_CPUID(OP)
+#
+# DESCRIPTION
+#
+# On Pentium and later x86 processors, with gcc or a compiler that has a
+# compatible syntax for inline assembly instructions, run a small program
+# that executes the cpuid instruction with input OP. This can be used to
+# detect the CPU type.
+#
+# On output, the values of the eax, ebx, ecx, and edx registers are stored
+# as hexadecimal strings as "eax:ebx:ecx:edx" in the cache variable
+# ax_cv_gcc_x86_cpuid_OP.
+#
+# If the cpuid instruction fails (because you are running a
+# cross-compiler, or because you are not using gcc, or because you are on
+# a processor that doesn't have this instruction), ax_cv_gcc_x86_cpuid_OP
+# is set to the string "unknown".
+#
+# This macro mainly exists to be used in AX_GCC_ARCHFLAG.
+#
+# LICENSE
+#
+# Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
+# Copyright (c) 2008 Matteo Frigo
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 7
+
+AC_DEFUN([AX_GCC_X86_CPUID],
+[AC_REQUIRE([AC_PROG_CC])
+AC_LANG_PUSH([C])
+AC_CACHE_CHECK(for x86 cpuid $1 output, ax_cv_gcc_x86_cpuid_$1,
+ [AC_RUN_IFELSE([AC_LANG_PROGRAM([#include <stdio.h>], [
+ int op = $1, eax, ebx, ecx, edx;
+ FILE *f;
+ __asm__("cpuid"
+ : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
+ : "a" (op));
+ f = fopen("conftest_cpuid", "w"); if (!f) return 1;
+ fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
+ fclose(f);
+ return 0;
+])],
+ [ax_cv_gcc_x86_cpuid_$1=`cat conftest_cpuid`; rm -f conftest_cpuid],
+ [ax_cv_gcc_x86_cpuid_$1=unknown; rm -f conftest_cpuid],
+ [ax_cv_gcc_x86_cpuid_$1=unknown])])
+AC_LANG_POP([C])
+])
