kmx git

Commit	Date	Message
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
60d3965e	2019-10-30T15:36:17	Readability: remove redundant return, continue, enum declaration
b458d7a2	2019-10-30T15:13:55	Readability: remove redundant cast to the same type
680e7937	2019-07-07T09:10:56	Fixed bug 4710 - audio/alsa: avoid configuring hardware parameters with only a single period Anthony Pesch The previous code first configured the period size using snd_pcm_hw_par- ams_set_period_size_near. Then, it further narrowed the configuration space by calling snd_pcm_hw_params_set_buffer_size_near using a buffer size of 2 times the _requested_ period size in order to try and get a configuration with only 2 periods. If the configured period size was larger than the requested size, the second call could inadvertently narrow the configuration space to contain only a single period. Rather than fixing the call to snd_pcm_hw_params_set_buffer_size_near to use a size of 2 times the configured period size, the code has been changed to use snd_pcm_hw_params_set_periods_min in order to more clearly explain the intent.
35255342	2019-03-16T18:48:21	Fixed bug 4525 - Fix crash in ALSA_HotplugThread caused by bad return value check Anthony Pesch Fix snd_device_name_hint return value check According to the ALSA documentation, snd_device_name_hint returns 0 on success, otherwise a negative error code. The code previously only considered -1 to be an error, which let other error codes through resulting in a segfault when hints (which was NULL) was dereferenced
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
5febdfce	2018-09-24T11:49:25	Fixed whitespace
623a6def	2018-08-07T16:49:18	alsa: optionally run entire pipeline non-blocking.
c5914295	2018-05-04T21:21:32	alsa: avoid hardware parameters with an excessive number of periods. The previous code attempted to use set_buffer_size / set_period_size discretely, favoring the parameters which generated a buffer size that was exactly 2x the requested buffer size. This solution ultimately prioritizes only the buffer size, which comes at a large performance cost on some machines where this results in an excessive number of periods. In my case, for a 4096 sample buffer, this configured the device to use 37 periods with a period size of 221 samples and a buffer size of 8192 samples. With 37 periods, the SDL Audio thread was consuming 25% of the CPU. This code has been refactored to use set_period_size and set_buffer_size together. set_period_size is called first to attempt to set the period to exactly match the requested buffer size, and set_buffer_size is called second to further refine the parameters to attempt to use only 2 periods. The fundamental change here is that the period size / count won't go to extreme values if the buffer size can't be exactly matched, the buffer size should instead just increase to the next closest multiple of the target period size that is supported. After changing this, for a 4096 sample buffer, the device is configured to use 3 periods with a period size of 4096 samples and a buffer size of 12288 samples. With only 3 periods, the SDL Audio thread doesn't even show up when profiling. Fixes Bugzilla #4156.
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
93583d46	2017-09-09T21:17:46	alsa: removed snd_pcm_wait() call before writing to playback device. This would cause playback problems in certain situations, such as on the Raspberry Pi. The device that the wait was added for seems to not benefit from it in modern times, and standard desktop Linux seems to do the right thing when a USB device is unplugged now, without this patch. Fixes Bugzilla #3599.
3639895e	2017-05-27T23:30:07	Removed unused errno includes.
6814f5db	2017-03-14T07:20:14	ALSA driver improvements: * alsa hotplug thread is low priority * give a chance for other threads to catch up when audio playback is not progressing * use nonblocking for alsa audio capture There is a bug with SDL hanging when an audio capture USB device is removed, because poll never returns
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
7ad3a46d	2016-11-05T21:23:17	ALSA: Fixed compile warning about unused function. Found by buildbot.
88f2d16e	2016-10-28T17:00:37	Fixed compiling on older versions of ALSA
fdcac1c2	2016-10-28T16:47:06	Fixed audio data swizzling when the device channel map already matches what SDL expects
62310c6b	2016-10-12T22:25:19	Work-around for a hang when USB devices are unplugged, contributed by James Zipperer
fed9b604	2016-10-10T23:26:26	Use SDL C runtime strlen()
ca42373f	2016-10-10T15:29:18	alsa: more tapdancing to enumerate physical hardware devices. Apparently some systems see "hw:", some see "default:" and some see "sysdefault:" (and maybe others!). My workstation sees both "hw:" and "sysdefault:" ... Try to find a prefix we like and prioritize the prefixes we (think) we want most. If everything else fails, if there's a "default" (not a prefix) device name, list that by itself so the user gets _something_ here. If we can't find a prefix we like _and_ there's no "default" device, report no hardware found at all.
52ae92ea	2016-10-07T19:08:22	ALSA_snd_pcm_drop() can hang on some systems (Steam Link) so don't use that when shutting down the ALSA audio driver.
3b0c7936	2016-10-07T11:18:55	Some systems include both "default:" and "hw:" for the same usb device
8e199461	2016-10-06T06:08:16	fix for finding ALSA hotplug devices on Steam Link James Zipperer The device names show up as "default:", not "hw:"
69cf1703	2016-10-04T06:46:46	fix deadlock on close device James Zipperer snd_pcm_drain doesn't always drain when you unplug a usb device. Use snd_pcm_drop instead
2da1ec83	2016-08-28T13:36:13	Merge audio capture work back into the mainline.
06dcdc7d	2016-08-28T11:56:11	Patched to compile.
850da32f	2016-08-28T08:50:26	alsa: Implemented hotplug support, cleaned up device names.
cfa95fe6	2016-08-15T10:09:41	alsa: don't enumerate virtual devices, just physical hardware.
761a7978	2016-08-05T01:59:06	audio: changed some SDL_memset() calls to SDL_zero(), other minor corrections.
9b647727	2016-08-05T01:44:41	audio: Clean up some CloseDevice() interface details. - It's now always called if device->hidden isn't NULL, even if OpenDevice() failed halfway through. This lets implementation code not have to clean up itself on every possible failure point; just return an error and SDL will handle it for you. - Implementations can assume this->hidden != NULL and not check for it. - implementations don't have to set this->hidden = NULL when done, because the caller is always about to free(this). - Don't reset other fields that are in a block of memory about to be free()'d. - Implementations all now free things like internal mix buffers last, after closing devices and such, to guarantee they definitely aren't in use anymore at the point of deallocation.
979de761	2016-08-05T01:44:15	audio: Removed internal SDL_audiomem.h and macros. I think this was important for SDL 1.2 because some targets needed special device memory for DMA buffers or locked memory buffers for use in hardware interrupts or something, but since it just defines to SDL_malloc and SDL_free now, I took it out for clarity's sake.
38f4b68c	2016-08-03T01:00:30	alsa: capture devices don't need a mixbuf allocated.
41e8f9ed	2016-08-02T15:06:40	alsa: Implemented audio capture support!
754efd43	2016-08-02T15:06:05	alsa: Cleaned up the 5.1 swizzle mess a little. Shouldn't this be something ALSA handles for us with channel maps, so we can just delete this code?
6d5c9c1e	2016-08-02T13:48:52	audio: Made some SDL_AudioDevice fields atomic. This makes sure they're properly communicated to the audio threads.
427472fe	2016-07-19T21:02:44	ALSA: Fixed adding wrong status to error message (thanks, romain145!). Fixes Bugzilla #3364.
a581346f	2016-04-04T22:49:13	alsa: Make device enumeration robust against weird results with NULL strings.
1e8df9cd	2016-03-05T23:25:23	alsa: Implemented basic device detection. This is kind of nasty, because ALSA reports dozens of "devices" that aren't really things you'd ever want, or things that should be listed this way, but the default path still works as before, and it at least allows these devices to be available to apps. This does not handle hotplugging yet. You get a device list at init time and that's it.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
f9cfd9fa	2015-03-18T02:01:17	Bunch of reworking to how we manage audio devices. Device enumeration now happens at startup and then is managed exclusively through hotplugging instead of full redetection. The device name list now has a unique "handle" associated with each item and SDL will pass this to the backend so they don't have to figure out how a human readable name maps to real hardware for a second time. Other cleanups, fixes, improvements, plus all the audio backends updated to the new interface...largely untested at this point, though.
0e02ce08	2015-03-16T02:11:39	Initial work on audio device hotplug support. This fills in the core pieces and fully implements it for Mac OS X. Most other platforms, at the moment, will report a disconnected device if it fails to write audio, but don't notice if the system's device list changed at all.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
08fa8da7	2013-10-20T21:56:15	Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings Andreas Ertelt The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121) The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "\|\| __STRICT_ANSI__") results in mingw's gcc throwing multiple warning: always_inline function might not be inlinable [-Wattributes] as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.
f79fc33a	2013-08-29T08:29:21	Christoph Mallon: Remove pointless if (x) before SDL_free(x)
1e49b1ed	2013-08-21T09:47:10	OCD fixes: Adds a space after /* (glory to regular expressions!)
695344d1	2013-08-21T09:43:09	OCD fixes: Adds a space before */
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

60d3965e

2019-10-30T15:36:17

Readability: remove redundant return, continue, enum declaration

b458d7a2

2019-10-30T15:13:55

Readability: remove redundant cast to the same type

680e7937

2019-07-07T09:10:56

Fixed bug 4710 - audio/alsa: avoid configuring hardware parameters with only a single period Anthony Pesch The previous code first configured the period size using snd_pcm_hw_par- ams_set_period_size_near. Then, it further narrowed the configuration space by calling snd_pcm_hw_params_set_buffer_size_near using a buffer size of 2 times the _requested_ period size in order to try and get a configuration with only 2 periods. If the configured period size was larger than the requested size, the second call could inadvertently narrow the configuration space to contain only a single period. Rather than fixing the call to snd_pcm_hw_params_set_buffer_size_near to use a size of 2 times the configured period size, the code has been changed to use snd_pcm_hw_params_set_periods_min in order to more clearly explain the intent.

35255342

2019-03-16T18:48:21

Fixed bug 4525 - Fix crash in ALSA_HotplugThread caused by bad return value check Anthony Pesch Fix snd_device_name_hint return value check According to the ALSA documentation, snd_device_name_hint returns 0 on success, otherwise a negative error code. The code previously only considered -1 to be an error, which let other error codes through resulting in a segfault when hints (which was NULL) was dereferenced

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

5febdfce

2018-09-24T11:49:25

Fixed whitespace

623a6def

2018-08-07T16:49:18

alsa: optionally run entire pipeline non-blocking.

c5914295

2018-05-04T21:21:32

alsa: avoid hardware parameters with an excessive number of periods. The previous code attempted to use set_buffer_size / set_period_size discretely, favoring the parameters which generated a buffer size that was exactly 2x the requested buffer size. This solution ultimately prioritizes only the buffer size, which comes at a large performance cost on some machines where this results in an excessive number of periods. In my case, for a 4096 sample buffer, this configured the device to use 37 periods with a period size of 221 samples and a buffer size of 8192 samples. With 37 periods, the SDL Audio thread was consuming 25% of the CPU. This code has been refactored to use set_period_size and set_buffer_size together. set_period_size is called first to attempt to set the period to exactly match the requested buffer size, and set_buffer_size is called second to further refine the parameters to attempt to use only 2 periods. The fundamental change here is that the period size / count won't go to extreme values if the buffer size can't be exactly matched, the buffer size should instead just increase to the next closest multiple of the target period size that is supported. After changing this, for a 4096 sample buffer, the device is configured to use 3 periods with a period size of 4096 samples and a buffer size of 12288 samples. With only 3 periods, the SDL Audio thread doesn't even show up when profiling. Fixes Bugzilla #4156.

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

93583d46

2017-09-09T21:17:46

alsa: removed snd_pcm_wait() call before writing to playback device. This would cause playback problems in certain situations, such as on the Raspberry Pi. The device that the wait was added for seems to not benefit from it in modern times, and standard desktop Linux seems to do the right thing when a USB device is unplugged now, without this patch. Fixes Bugzilla #3599.

3639895e

2017-05-27T23:30:07

Removed unused errno includes.

6814f5db

2017-03-14T07:20:14

ALSA driver improvements: * alsa hotplug thread is low priority * give a chance for other threads to catch up when audio playback is not progressing * use nonblocking for alsa audio capture There is a bug with SDL hanging when an audio capture USB device is removed, because poll never returns

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

7ad3a46d

2016-11-05T21:23:17

ALSA: Fixed compile warning about unused function. Found by buildbot.

88f2d16e

2016-10-28T17:00:37

Fixed compiling on older versions of ALSA

fdcac1c2

2016-10-28T16:47:06

Fixed audio data swizzling when the device channel map already matches what SDL expects

62310c6b

2016-10-12T22:25:19

Work-around for a hang when USB devices are unplugged, contributed by James Zipperer

fed9b604

2016-10-10T23:26:26

Use SDL C runtime strlen()

ca42373f

2016-10-10T15:29:18

alsa: more tapdancing to enumerate physical hardware devices. Apparently some systems see "hw:", some see "default:" and some see "sysdefault:" (and maybe others!). My workstation sees both "hw:" and "sysdefault:" ... Try to find a prefix we like and prioritize the prefixes we (think) we want most. If everything else fails, if there's a "default" (not a prefix) device name, list that by itself so the user gets _something_ here. If we can't find a prefix we like _and_ there's no "default" device, report no hardware found at all.

52ae92ea

2016-10-07T19:08:22

ALSA_snd_pcm_drop() can hang on some systems (Steam Link) so don't use that when shutting down the ALSA audio driver.

3b0c7936

2016-10-07T11:18:55

Some systems include both "default:" and "hw:" for the same usb device

8e199461

2016-10-06T06:08:16

fix for finding ALSA hotplug devices on Steam Link James Zipperer The device names show up as "default:", not "hw:"

69cf1703

2016-10-04T06:46:46

fix deadlock on close device James Zipperer snd_pcm_drain doesn't always drain when you unplug a usb device. Use snd_pcm_drop instead

2da1ec83

2016-08-28T13:36:13

Merge audio capture work back into the mainline.

06dcdc7d

2016-08-28T11:56:11

Patched to compile.

850da32f

2016-08-28T08:50:26

alsa: Implemented hotplug support, cleaned up device names.

cfa95fe6

2016-08-15T10:09:41

alsa: don't enumerate virtual devices, just physical hardware.

761a7978

2016-08-05T01:59:06

audio: changed some SDL_memset() calls to SDL_zero(), other minor corrections.

9b647727

2016-08-05T01:44:41

audio: Clean up some CloseDevice() interface details. - It's now always called if device->hidden isn't NULL, even if OpenDevice() failed halfway through. This lets implementation code not have to clean up itself on every possible failure point; just return an error and SDL will handle it for you. - Implementations can assume this->hidden != NULL and not check for it. - implementations don't have to set this->hidden = NULL when done, because the caller is always about to free(this). - Don't reset other fields that are in a block of memory about to be free()'d. - Implementations all now free things like internal mix buffers last, after closing devices and such, to guarantee they definitely aren't in use anymore at the point of deallocation.

979de761

2016-08-05T01:44:15

audio: Removed internal SDL_audiomem.h and macros. I think this was important for SDL 1.2 because some targets needed special device memory for DMA buffers or locked memory buffers for use in hardware interrupts or something, but since it just defines to SDL_malloc and SDL_free now, I took it out for clarity's sake.

38f4b68c

2016-08-03T01:00:30

alsa: capture devices don't need a mixbuf allocated.

41e8f9ed

2016-08-02T15:06:40

alsa: Implemented audio capture support!

754efd43

2016-08-02T15:06:05

alsa: Cleaned up the 5.1 swizzle mess a little. Shouldn't this be something ALSA handles for us with channel maps, so we can just delete this code?

6d5c9c1e

2016-08-02T13:48:52

audio: Made some SDL_AudioDevice fields atomic. This makes sure they're properly communicated to the audio threads.

427472fe

2016-07-19T21:02:44

ALSA: Fixed adding wrong status to error message (thanks, romain145!). Fixes Bugzilla #3364.

a581346f

2016-04-04T22:49:13

alsa: Make device enumeration robust against weird results with NULL strings.

1e8df9cd

2016-03-05T23:25:23

alsa: Implemented basic device detection. This is kind of nasty, because ALSA reports dozens of "devices" that aren't really things you'd ever want, or things that should be listed this way, but the default path still works as before, and it at least allows these devices to be available to apps. This does not handle hotplugging yet. You get a device list at init time and that's it.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

f9cfd9fa

2015-03-18T02:01:17

Bunch of reworking to how we manage audio devices. Device enumeration now happens at startup and then is managed exclusively through hotplugging instead of full redetection. The device name list now has a unique "handle" associated with each item and SDL will pass this to the backend so they don't have to figure out how a human readable name maps to real hardware for a second time. Other cleanups, fixes, improvements, plus all the audio backends updated to the new interface...largely untested at this point, though.

0e02ce08

2015-03-16T02:11:39

Initial work on audio device hotplug support. This fills in the core pieces and fully implements it for Mac OS X. Most other platforms, at the moment, will report a disconnected device if it fails to write audio, but don't notice if the system's device list changed at all.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

58edac3e

2014-02-02T00:53:27

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

08fa8da7

2013-10-20T21:56:15

Fixed bug 2129 - fix for bug 2121 breaks linking for mingw and throws multiple warnings Andreas Ertelt The problem in question is caused by changeset 7771 (http://hg.libsdl.org/SDL/rev/5486e579872e / https://bugzilla.libsdl.org/show_bug.cgi?id=2121) The redefinition of __inline__ (introduced by the addition of begin_code.h:128's "|| __STRICT_ANSI__") results in mingw's gcc throwing multiple warning: always_inline function might not be inlinable [-Wattributes] as well as a whole bunch of redefinitions of mingw internals which break linking of projects including the SDL2 headers.

f79fc33a

2013-08-29T08:29:21

Christoph Mallon: Remove pointless if (x) before SDL_free(x)

1e49b1ed

2013-08-21T09:47:10

OCD fixes: Adds a space after /* (glory to regular expressions!)

695344d1

2013-08-21T09:43:09

OCD fixes: Adds a space before */

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/audio/alsa/SDL_alsa_audio.c

src/audio/alsa/SDL_alsa_audio.c

Log