kmx git

Commit	Date	Message
4fe7b2cb	2022-03-24T11:00:43	static analysis: Fixed several complaints from codechecker. There are still some pending Objective-C specific issues. Reference issue #4600.
120c76c8	2022-01-03T09:40:00	Updated copyright for 2022
2004aaf3	2021-11-22T16:54:17	SDL_wave: use SDL_free
3bf7994f	2021-09-27T14:38:12	Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough / comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Clang before Clang 10 and GCC before GCC 7 have problems with using __attribute__ as a sole statement and warn about a "declaration not declaring anything", so fall back to using the / fallthrough / comment if we are using those older compiler versions. Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing / fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.
abc12a83	2021-11-11T15:58:44	Revert "Add and use `SDL_FALLTHROUGH` for fallthroughs" This reverts commit 66a08aa3914a98667f212e79b4f0b9453203d656. This causes problems with older compilers: https://github.com/libsdl-org/SDL/pull/4791#issuecomment-966630997
66a08aa3	2021-09-27T14:38:12	Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough / comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing / fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.
f443a6fc	2021-02-11T02:05:02	Fix format string warnings for width-based integers The DJGPP compiler emits many warnings for conflicts between print format specifiers and argument types. To fix the warnings, I added `SDL_PRIx32` macros for use with `Sint32` and `Uint32` types. The macros alias those found in <inttypes.h> or fallback to a reasonable default. As an alternative, print arguments could be cast to plain old integers. I opted slightly for the current solution as it felt more technically correct, despite making the format strings more verbose.
9130f7c3	2021-01-02T10:25:38	Updated copyright for 2021
53b16679	2020-11-11T12:33:55	SIZE_MAX need not be defined in limits.h it can be in limits.h (windows) or stdint.h.
003a1698	2020-10-06T11:07:50	wav: Make sure the data size is a multiple of blockalign, not an exact match. I _think_ this is a right thing to do; it fixes a .wav file I have here that has blockalign==2 when channels==2 and bitspersample==16, which otherwise would fail.
b6afbe63	2020-04-07T09:38:57	Added SDL_log.h to SDL_internal.h so logging is available everywhere
b1c6e7c2	2020-01-23T00:32:34	Fixed compile warning
dbe5c14b	2020-01-21T15:49:37	audio: Calculate a legitimate SDL_AudioSpec::silence in SDL_LoadWAV_RW().
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
ed469fa5	2019-10-23T09:36:41	Fixed bug 4842 - Redundant condition in MS_ADPCM_Decode and IMA_ADPCM_Decode (Thanks!)
4953e050	2019-07-31T05:11:40	use SDL_zeroa at more places where the argument is an array.
7a47c292	2019-07-31T01:22:02	Fix bug 4746 - introduce SDL_zeroa macro.
fdc67c3c	2019-07-31T00:10:00	MS_ADPCM_Decode: fix assigning an array to a pointer (lose '&').
90e2dc98	2019-06-14T18:23:51	A few minor changes to placate static analysis.
2fa33d6f	2019-06-12T15:43:08	wave: Fixed static analysis warning about dead assignment. (technically, this function never returns an error at this point, but since it _does_ have an "uhoh, is this corrupt data?" comment that it ignores, we should probably make sure we handle error cases in the future. :) )
cd011bb1	2019-06-12T10:42:02	SDL_Wave: missing field 'length' initializer
254eb677	2019-06-11T02:08:31	windows: Don't let Visual Studio insert an implicit dependency on memset(). Fixes Bugzilla #4662.
d8da33c0	2019-06-10T08:49:26	Fixed bug 4662 - SDL failed to build due to error LNK2019: unresolved external symbol _memset referenced in function _IMA_ADPCM_Decode with MSVC on Windows LinGao We build SDL with Visual studio 2017 compiler on Windows Server 2016, but it failed to build due to error LNK2019: unresolved external symbol _memset referenced in function _IMA_ADPCM_Decode on latest default branch. And we found that it can be first reproduced on ca7283111ad0 changeset. Could you please help have a look about this issue? Thanks in advance!
762b788f	2019-06-09T12:46:10	Cleanup on bug 3894 - Fuzzing crashes for SDL_LoadWAV Simon Hug Attached is a minor cleanup patch. It changes the option name of one hint to something better, puts one or two more checks in, and adds explicit casting where warnings could appear otherwise. I hope the naming of the hints and their options is acceptable. It would be kind of awkward to change them after they get released with an official SDL version.
a21b5b30	2019-06-08T19:09:43	Fixed build
990e166a	2019-06-08T19:02:42	Fixed bug 3894 - Fuzzing crashes for SDL_LoadWAV Simon Hug I had a look at this and made some additions to SDL_wave.c. The attached patch adds many checks and error messages. For some reason I also added A-law and ?-law decoders. Forgot exactly why... but hey, they're small. The WAVE format is seriously underspecified (at least by the documents that are publicly available on the internet) and it's a shame Microsoft never put something better out there. The language used in them is so loose at times, it's not surprising the encoders and decoders behave very differently. The Windows Media Player doesn't even support MS ADPCM correctly. The patch also adds some hints to make the decoder more strict at the cost of compatibility with weird WAVE files. I still think it needs a bit of cleaning up (Not happy with the MultiplySize function. Don't like the name and other SDL code may want to use something like this too.) and some duplicated code may be folded together. It does work in this state and I have thrown all kinds of WAVE files at it. The AFL files also pass with it and some even play (obviously just noise). Crafty little fuzzer. Any critique would be welcome. I have a fork of SDL with a audio-loadwav branch over here if someone wants to use the commenting feature of Bitbucket: https://bitbucket.org/ChliHug/SDL I also cobbled some Lua scripts together to create WAVE test files: https://bitbucket.org/ChliHug/gendat
3f19a6d5	2019-06-08T18:07:58	CVE-2019-7578: Fix a buffer overread in InitIMA_ADPCM If IMA ADPCM format chunk was too short, InitIMA_ADPCM() parsing it could read past the end of chunk data. This patch fixes it. CVE-2019-7578 https://bugzilla.libsdl.org/show_bug.cgi?id=4494 Signed-off-by: Petr P?sa? <ppisar@redhat.com>
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
ca15c7d6	2017-09-07T10:56:08	wave: SDL_LoadWAV now supports 24-bit audio.
e8677a1b	2017-02-17T02:25:37	audio: Added basic WAVE_FORMAT_EXTENSIBLE support to .wav loader. This is just enough to get you through a file that just used the extended header for float or int data. It doesn't handle all the other things that you expect from this header, like 24-bit samples inside a 32-bit container or speaker masks.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
761a7978	2016-08-05T01:59:06	audio: changed some SDL_memset() calls to SDL_zero(), other minor corrections.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
19d878d7	2014-07-08T00:42:14	Skip JUNK chunks in wave files
73cb234b	2014-07-07T10:38:10	Fixed compiler warning on Mac OS X
1ee96bb9	2014-07-07T10:26:28	Fixed mingw64 build and warnings
9f5e3ed7	2014-06-22T10:05:59	Fixed bug 1673 - BEXT wave files only have extra metadata that you can easily skip through bill In SDL_wave.c, BEXT wave files with "bext" instead of "fmt " are choked on if (chunk.magic != FMT) { SDL_SetError("Complex WAVE files not supported"); was_error = 1; goto done; } BEXT files http://en.wikipedia.org/wiki/Broadcast_Wave_Format actually playback the same as regular waves. All they have is (A LOT OF) extra header info. To open them, just SKIP the "bext" chunk, and the "fmt " chunk will be a couple of hundred bytes later. The "fmt " chunk is also bloated, but if you skip past the extra information to the "data" chunk, there is nothing different about a BEXT wave file than a "normal" one. You can then load the data and proceed as normal.
7e52722d	2014-06-20T11:10:16	Fix compiler warnings in Native Client and Linux builds.
1f716769	2014-06-05T15:29:23	Fix warnings, only major one being an SDL_SetError not providing enough arguments.
da6d9a9f	2014-06-04T10:56:56	Added annotations to help code analysis tools CR: Bruce Dawson
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
7e1289af	2013-11-24T23:56:17	Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.
f79fc33a	2013-08-29T08:29:21	Christoph Mallon: Remove pointless if (x) before SDL_free(x)
1e49b1ed	2013-08-21T09:47:10	OCD fixes: Adds a space after /* (glory to regular expressions!)
695344d1	2013-08-21T09:43:09	OCD fixes: Adds a space before */
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

4fe7b2cb

2022-03-24T11:00:43

static analysis: Fixed several complaints from codechecker. There are still some pending Objective-C specific issues. Reference issue #4600.

120c76c8

2022-01-03T09:40:00

Updated copyright for 2022

2004aaf3

2021-11-22T16:54:17

SDL_wave: use SDL_free

3bf7994f

2021-09-27T14:38:12

Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough */ comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Clang before Clang 10 and GCC before GCC 7 have problems with using __attribute__ as a sole statement and warn about a "declaration not declaring anything", so fall back to using the /* fallthrough */ comment if we are using those older compiler versions. Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing /* fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.

abc12a83

2021-11-11T15:58:44

Revert "Add and use `SDL_FALLTHROUGH` for fallthroughs" This reverts commit 66a08aa3914a98667f212e79b4f0b9453203d656. This causes problems with older compilers: https://github.com/libsdl-org/SDL/pull/4791#issuecomment-966630997

66a08aa3

2021-09-27T14:38:12

Add and use `SDL_FALLTHROUGH` for fallthroughs Case fallthrough warnings can be suppressed using the __fallthrough__ compiler attribute. Unfortunately, not all compilers have this attribute, or even have __has_attribute to check if they have the __fallthrough__ attribute. [[fallthrough]] is also available in C++17 and the next C2x, but not everyone uses C++17 or C2x. So define the SDL_FALLTHROUGH macro to deal with those problems - if we are using C++17 or C2x, it expands to [[fallthrough]]; else if the compiler has __has_attribute and has the __fallthrough__ attribute, then it expands to __attribute__((__fallthrough__)); else it expands to an empty statement, with a /* fallthrough */ comment (it's a do {} while (0) statement, because users of this macro need to use a semicolon, because [[fallthrough]] and __attribute__((__fallthrough__)) require a semicolon). Applications using SDL are also free to use this macro (because it is defined in begin_code.h). All existing /* fallthrough */ comments have been replaced with this macro. Some of them were unnecessary because they were the last case in a switch; using SDL_FALLTHROUGH in those cases would result in a compile error on compilers that support __fallthrough__, for having a __attribute__((__fallthrough__)) statement that didn't immediately precede a case label.

f443a6fc

2021-02-11T02:05:02

Fix format string warnings for width-based integers The DJGPP compiler emits many warnings for conflicts between print format specifiers and argument types. To fix the warnings, I added `SDL_PRIx32` macros for use with `Sint32` and `Uint32` types. The macros alias those found in <inttypes.h> or fallback to a reasonable default. As an alternative, print arguments could be cast to plain old integers. I opted slightly for the current solution as it felt more technically correct, despite making the format strings more verbose.

9130f7c3

2021-01-02T10:25:38

Updated copyright for 2021

53b16679

2020-11-11T12:33:55

SIZE_MAX need not be defined in limits.h it can be in limits.h (windows) or stdint.h.

003a1698

2020-10-06T11:07:50

wav: Make sure the data size is a multiple of blockalign, not an exact match. I _think_ this is a right thing to do; it fixes a .wav file I have here that has blockalign==2 when channels==2 and bitspersample==16, which otherwise would fail.

b6afbe63

2020-04-07T09:38:57

Added SDL_log.h to SDL_internal.h so logging is available everywhere

b1c6e7c2

2020-01-23T00:32:34

Fixed compile warning

dbe5c14b

2020-01-21T15:49:37

audio: Calculate a legitimate SDL_AudioSpec::silence in SDL_LoadWAV_RW().

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

ed469fa5

2019-10-23T09:36:41

Fixed bug 4842 - Redundant condition in MS_ADPCM_Decode and IMA_ADPCM_Decode (Thanks!)

4953e050

2019-07-31T05:11:40

use SDL_zeroa at more places where the argument is an array.

7a47c292

2019-07-31T01:22:02

Fix bug 4746 - introduce SDL_zeroa macro.

fdc67c3c

2019-07-31T00:10:00

MS_ADPCM_Decode: fix assigning an array to a pointer (lose '&').

90e2dc98

2019-06-14T18:23:51

A few minor changes to placate static analysis.

2fa33d6f

2019-06-12T15:43:08

wave: Fixed static analysis warning about dead assignment. (technically, this function never returns an error at this point, but since it _does_ have an "uhoh, is this corrupt data?" comment that it ignores, we should probably make sure we handle error cases in the future. :) )

cd011bb1

2019-06-12T10:42:02

SDL_Wave: missing field 'length' initializer

254eb677

2019-06-11T02:08:31

windows: Don't let Visual Studio insert an implicit dependency on memset(). Fixes Bugzilla #4662.

d8da33c0

2019-06-10T08:49:26

Fixed bug 4662 - SDL failed to build due to error LNK2019: unresolved external symbol _memset referenced in function _IMA_ADPCM_Decode with MSVC on Windows LinGao We build SDL with Visual studio 2017 compiler on Windows Server 2016, but it failed to build due to error LNK2019: unresolved external symbol _memset referenced in function _IMA_ADPCM_Decode on latest default branch. And we found that it can be first reproduced on ca7283111ad0 changeset. Could you please help have a look about this issue? Thanks in advance!

762b788f

2019-06-09T12:46:10

Cleanup on bug 3894 - Fuzzing crashes for SDL_LoadWAV Simon Hug Attached is a minor cleanup patch. It changes the option name of one hint to something better, puts one or two more checks in, and adds explicit casting where warnings could appear otherwise. I hope the naming of the hints and their options is acceptable. It would be kind of awkward to change them after they get released with an official SDL version.

a21b5b30

2019-06-08T19:09:43

Fixed build

990e166a

2019-06-08T19:02:42

Fixed bug 3894 - Fuzzing crashes for SDL_LoadWAV Simon Hug I had a look at this and made some additions to SDL_wave.c. The attached patch adds many checks and error messages. For some reason I also added A-law and ?-law decoders. Forgot exactly why... but hey, they're small. The WAVE format is seriously underspecified (at least by the documents that are publicly available on the internet) and it's a shame Microsoft never put something better out there. The language used in them is so loose at times, it's not surprising the encoders and decoders behave very differently. The Windows Media Player doesn't even support MS ADPCM correctly. The patch also adds some hints to make the decoder more strict at the cost of compatibility with weird WAVE files. I still think it needs a bit of cleaning up (Not happy with the MultiplySize function. Don't like the name and other SDL code may want to use something like this too.) and some duplicated code may be folded together. It does work in this state and I have thrown all kinds of WAVE files at it. The AFL files also pass with it and some even play (obviously just noise). Crafty little fuzzer. Any critique would be welcome. I have a fork of SDL with a audio-loadwav branch over here if someone wants to use the commenting feature of Bitbucket: https://bitbucket.org/ChliHug/SDL I also cobbled some Lua scripts together to create WAVE test files: https://bitbucket.org/ChliHug/gendat

3f19a6d5

2019-06-08T18:07:58

CVE-2019-7578: Fix a buffer overread in InitIMA_ADPCM If IMA ADPCM format chunk was too short, InitIMA_ADPCM() parsing it could read past the end of chunk data. This patch fixes it. CVE-2019-7578 https://bugzilla.libsdl.org/show_bug.cgi?id=4494 Signed-off-by: Petr P?sa? <ppisar@redhat.com>

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

ca15c7d6

2017-09-07T10:56:08

wave: SDL_LoadWAV now supports 24-bit audio.

e8677a1b

2017-02-17T02:25:37

audio: Added basic WAVE_FORMAT_EXTENSIBLE support to .wav loader. This is just enough to get you through a file that just used the extended header for float or int data. It doesn't handle all the other things that you expect from this header, like 24-bit samples inside a 32-bit container or speaker masks.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

761a7978

2016-08-05T01:59:06

audio: changed some SDL_memset() calls to SDL_zero(), other minor corrections.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

19d878d7

2014-07-08T00:42:14

Skip JUNK chunks in wave files

73cb234b

2014-07-07T10:38:10

Fixed compiler warning on Mac OS X

1ee96bb9

2014-07-07T10:26:28

Fixed mingw64 build and warnings

9f5e3ed7

2014-06-22T10:05:59

Fixed bug 1673 - BEXT wave files only have extra metadata that you can easily skip through bill In SDL_wave.c, BEXT wave files with "bext" instead of "fmt " are choked on if (chunk.magic != FMT) { SDL_SetError("Complex WAVE files not supported"); was_error = 1; goto done; } BEXT files http://en.wikipedia.org/wiki/Broadcast_Wave_Format actually playback the same as regular waves. All they have is (A LOT OF) extra header info. To open them, just SKIP the "bext" chunk, and the "fmt " chunk will be a couple of hundred bytes later. The "fmt " chunk is also bloated, but if you skip past the extra information to the "data" chunk, there is nothing different about a BEXT wave file than a "normal" one. You can then load the data and proceed as normal.

7e52722d

2014-06-20T11:10:16

Fix compiler warnings in Native Client and Linux builds.

1f716769

2014-06-05T15:29:23

Fix warnings, only major one being an SDL_SetError not providing enough arguments.

da6d9a9f

2014-06-04T10:56:56

Added annotations to help code analysis tools CR: Bruce Dawson

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

58edac3e

2014-02-02T00:53:27

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

7e1289af

2013-11-24T23:56:17

Make internal SDL sources include SDL_internal.h instead of SDL_config.h The new header will include SDL_config.h, but allows for other global stuff.

f79fc33a

2013-08-29T08:29:21

Christoph Mallon: Remove pointless if (x) before SDL_free(x)

1e49b1ed

2013-08-21T09:47:10

OCD fixes: Adds a space after /* (glory to regular expressions!)

695344d1

2013-08-21T09:43:09

OCD fixes: Adds a space before */

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/src/audio/SDL_wave.c

src/audio/SDL_wave.c

Log