kmx git

Commit	Date	Message
2cdb9674	2017-09-10T10:25:36	Fixed the include path for khronos with Visual Studio
f465f24d	2017-09-09T08:36:37	Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.
347fe704	2017-08-30T14:25:01	Fixed bug 3789 - Android : small clean up Sylvain Since https://hg.libsdl.org/SDL/rev/6546daa45a02 SDL_android_main.c is empty and then produce a warning nativeInit does not exist and dont need to be mark undefined
e53c5c5c	2017-08-30T00:40:06	Fix QNX build - prioritize system EGL headers over the Khronos ones
92bf6085	2017-08-29T22:04:43	Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0 Colin Barrett Using the pre-built x86 devel libs from here: https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip If I have: SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0); SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG); and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created. Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't. Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect
c0530bcd	2017-08-28T22:42:41	We removed QuartzCore link dependency in commit 5be6badaf7e1
ce2b1644	2017-08-28T00:11:38	Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
ea91908e	2017-08-27T23:39:38	Fixed Android ABI check to match vulkan/vk_platform.h
c722e58d	2017-08-27T23:25:12	vulkan: Include a copy of vulkan.h and vk_platform.h. Now we can provide Vulkan support in the build even if the build box doesn't have a Vulkan SDK, since we dynamically link to the library anyhow.
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
5ca01522	2017-08-26T21:17:12	Fixed bug 3774 - Cmake build fails for Android sfalexrog Android haptic code was not added to CMakeLists.txt, leading to build failures when targeting Android platform. Attached patch adds Android haptic driver to source sets and adds configuration parameter to SDL_config.h.cmake.
f807655b	2017-08-21T11:25:04	Fixed bug 3761 - Windows non-MinGW cmake build defines HAVE_WCSLCPY and HAVE_WCSLCAT Tom Seddon https://github.com/SDL-mirror/SDL/commit/0f0ad62237fabb58d5811fe6fa59e5e5aa0e2fb5 (git head at the time of writing); Visual Studio 2015, toolset v140, Platform 10.0.14393.0, building for x64 Windows non-MinGW cmake build sets defines implying wcslcpy and wcslcat are available, but Windows doesn't have these functions. Ryan C. Gordon That's weird, these are the exact two functions that Emscripten incorrectly believed it had until we upgraded the buildbot's emsdk install. Not sure what's up with this, but it's possibly not a MingW-specific thing!
a78c20ae	2017-08-21T11:17:38	configury: check mmdeviceapi.h and audioclient.h before enabling wasapi.
2dc5d32f	2017-08-18T18:16:37	Updated version to 2.0.6
5c4a45f1	2017-08-18T20:25:14	cmake: some iOS fixes (don't link to Cocoa or Carbon frameworks). Fixes Bugzilla #3625.
f4011bf0	2017-08-18T20:00:29	cmake: added a FIXME for later. Have to figure out what cmake version fixed this and bump the minimum to that.
f75caa2f	2017-08-18T18:52:25	cmake: Fix building for macOS with Xcode generator (thanks, dungaipara!). Fixes Bugzilla #3625.
47beda97	2017-08-17T15:44:47	cmake: add core/unix sources to the build. Fixes Bugzilla #3757.
fb835f9e	2017-08-14T20:22:19	Fixed bug 2330 - Debian bug report: SDL2 X11 driver buffer overflow with large X11 file descriptor manuel.montezelo Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015 -------------------------------------------------------- Package: libsdl2-2.0-0 Version: 2.0.0+dfsg1-3 Severity: normal Tags: patch I have occasional crashes here caused by the X11 backend of SDL2. It seems to be caused by the X11_Pending function trying to add a high number (> 1024) file descriptor to a fd_set before doing a select on it to avoid busy waiting on X11 events. This causes a buffer overflow because the file descriptor is larger (or equal) than the limit FD_SETSIZE. Attached is a possible workaround patch. Please also keep in mind that fd_set are also used in following files which may have similar problems. src/audio/bsd/SDL_bsdaudio.c src/audio/paudio/SDL_paudio.c src/audio/qsa/SDL_qsa_audio.c src/audio/sun/SDL_sunaudio.c src/joystick/linux/SDL_sysjoystick.c -------------------------------------------------------- On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote: > I have occasional crashes here caused by the X11 backend of SDL2. It seems > to be caused by the X11_Pending function trying to add a high number (> > 1024) file descriptor to a fd_set before doing a select on it to avoid busy > waiting on X11 events. This causes a buffer overflow because the file > descriptor is larger (or equal) than the limit FD_SETSIZE. I personally experienced this problem while hacking on the python bindings package for SDL2 [1] (while doing make runtest). But it easier to reproduce in a smaller, synthetic testcase.
f8de064c	2017-08-13T22:26:44	Added wchar.h to fix build on some platforms with new wcs* functions
f1829d95	2017-08-13T20:37:49	Added SDL_wcscmp()
75d5f343	2017-08-11T21:17:10	Forgot to add function check for fopen64 to CMake build
73c6cebb	2017-08-09T22:43:16	cmake: Pacify warning about Policy CMP0042 not being set.
496337b3	2017-08-09T19:03:10	Fixed bug 3651 - CMake build does not install CMake package configuration tschwinger@elitemail.org Most ironically, although autoconf/automake-based builds install (pretty half-assed) CMake package configuration files, they're missing in installations resulting from CMake-based builds entirely. A proper configuration file typically also loads target exports (implemented in patch 3572, also fixing this issue - see my comment on that issue for details). I believe it would be best to let the dinosaurs go extinct and redirect all build efforts to the CMake end for two reasons: 1. It potentially provides the best user experience, but you'd have to give it some love and ship with less quirky buildfiles. 2. It would force distros to build SDL via CMake and thus would ensure target exports are actually available everywhere. Various CMake patches I submitted today in summary (directly converted from the HG commits and `am`d onto a fork of a git mirror that happened to be on `tip`). https://github.com/tschw/SDL/commits/patched Fixing #2576 #3572, #3613, and this fresh ticket, which is almost entirely advertisement ;). These already do to make SDL much less of a quirky fella to have in your dependency tree...
56363ebf	2017-08-02T10:22:48	Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make
3c09265d	2017-07-10T18:31:28	Fixed bug 3609 - Windows build fails due to conflicting types for 'XINPUT_GAMEPAD_EX' Ozkan Sezer (In reply to Ryan C. Gordon from comment #9) > I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can > you verify this works on the latest MinGW? > > Thanks, > --ryan. This patch is wrong: the structure in question has nothing to do with any gcc version in use. I suggest reverting this adding a conigury check for it, instead. Something like the following should do it: (configure needs regenerating.)
c1cd93e5	2017-06-12T16:35:34	Fixed bug 3670 - CMake IOS haptic error
e5f4a71f	2017-06-11T16:00:45	cmake: iOS haptic section was referencing power source code (thanks, Martin!). Fixes Bugzilla #3670.
2b5a5c51	2017-06-08T22:07:55	Android build fixes -Enabling checking for GCC_ATOMICS also on clang by default. This way all Android ABIs build successfully -Android cmake: Threading was not enabled correctly -Android cmake: Timers and dynamic lib loading were not included in the sources
d9039f23	2017-06-08T13:27:58	jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)
dc8a22cd	2017-06-06T13:39:29	cmake: don't use /NODEFAULTLIB if we are using the C runtime (thanks, Rob!). Fixes Bugzilla #3640.
11289b76	2017-06-04T21:25:57	Android cmake build fixed to work with the official android gradle plugin
a7fc2822	2017-05-24T19:56:59	audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.
0e7530b0	2017-02-23T22:38:04	cmake: add WASAPI audio target to the build (thanks, Martin!). Fixes Bugzilla #3588.
5ea0c893	2017-01-24T12:20:41	CMake: fixed logic error in setting -mfpmath=387. Fixes Bugzilla #3565.
3594bf8e	2017-01-23T01:05:44	audio: Wired up new SSE code to build system.
df25258a	2017-01-06T20:43:53	Added configure and cmake support for libsamplerate
35430a73	2016-11-17T01:15:16	cpuinfo: first attempt at SDL_HasNEON() implementation.
f3502c3c	2016-10-14T01:04:21	Fixed building with cmake when fcitx isn't installed
34eebfba	2016-10-03T03:42:10	Fixed setting the version info in the shared library when using CMake Ray Molenkamp When building sdl as shared lib, the version info is lacking in the final binary. CMake gathers the right resource files into ${VERSION_SOURCES} but then doesn't do anything with them.
c9be93c6	2016-10-01T15:11:18	Fixed bug 3078 - cmake: fix sdl2.m4 install location on cross hosts Timo Gurr On cross hosts running autotools for SDL2_gfx-1.0.1 fails to find sdl2.m4: eautoreconf: running in /var/tmp/paludis/build/media-libs-SDL2_gfx-1.0.1/work/SDL2_gfx-1.0.1 ... aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library libtoolize --copy --force --automake aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library autoconf configure.in:128: error: possibly undefined macro: AM_PATH_SDL2 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. * Failed Running autoconf ! SDL2 installs it to /usr/x86_64-pc-linux-gnu/share/aclocal on cross hosts, attached patch makes use of CMAKE_INSTALL_FULL_DATAROOTDIR to support correctly installing to the arch independent location /usr/share/aclocal.
571f4ce8	2016-10-01T17:05:29	Fix CMake setting an incorrect video backend on iOS
671f2a49	2016-10-01T12:54:48	Fixed bug 3268 - CMAKE: ios fixes Martin Gerhardy ios is not properly handled in the cmake file. this patch is a start to do so - it properly builds for me with it.
bb24662c	2016-10-01T12:48:08	Fixed bug 3301 - IBus support on Linux with CMake joe.gsoc16 I recently looked into Unicode support in SDL2 and realized that SDL_TEXTEDITING doesn't get triggered at all (Japanese IME). According to others on IRC it works fine on Windows/Mac but not for me on (arch)Linux. When compiling SDL with autotools, IBus support is enabled by default but not so with CMake. I never used CMake before but got it working and also included that pkg-config determines flags for dbus (FIXME in CMakeLists).
e45698d2	2016-09-28T22:24:01	Updated version to 2.0.5 in preparation for release
e5070d20	2016-09-15T08:57:56	Fixed set of libraries needed to build on Mac OS X
93d42e2d	2016-09-15T08:46:14	Hopefully fixed the cmake build on Mac OS X
264e996e	2016-09-13T00:03:50	Fix CMake CMAKE_REQUIRED_FLAGS handling to preserve existing CMake flags required by Emscripten toolchain.
42feccea	2016-09-13T00:03:40	Include timers when using cmake (#29)
6188c334	2016-09-04T01:42:46	mac: Patched to compile with CMake project.
2c3bf665	2016-03-18T22:15:53	Windows CMake: don't try to link dxguid, it's unavailable when using Visual Studio's XP-compatible toolset.
e5d575b9	2016-01-16T21:58:49	Expose the EGL display and window for Vivante SDL windows
1615b2e2	2016-01-08T07:32:51	CMake: only set "-O3 -g" defaults if CMAKE_BUILD_TYPE wasn't set at all.
757e994e	2016-01-07T17:21:50	Fixed --enable-new-dtags check with cmake
dc5f05bb	2016-01-07T16:42:30	Use --enable-new-dtags to set RUNPATH rather than RPATH so that LD_LIBRARY_PATH is not overridden by the application.
bb1e2bd0	2016-01-05T05:44:32	CMake: Turned off Mac OS X rpath warning kludge. Apparently CMake errors out if it doesn't know this policy, and we don't otherwise require CMake 3.0 yet. Sigh.
e6e62bee	2016-01-05T01:26:32	CMake: Let static libraries optionally be built with Position Independent Code.
008a6abd	2016-01-05T01:25:54	CMake: use the old MACOSX_RPATH behavior (for now), silence the warning.
1373e890	2016-01-04T22:58:38	Try to build with GCC's -Wdeclaration-after-statement. This will help catch things that'll cause issues on C89 compilers before we send them on to fail on Buildbot.
1240f8e0	2016-01-03T20:52:44	CMake: Don't make a libSDL2.so symlink on Mac OS X (do .dylib instead).
b0d8dfcd	2015-12-31T15:26:40	CMake: Fixed building for Windows with VS2015 (bug #3080). - Don't try to link with the Visual C runtime. - Avoid code generation that would use functions from the VC runtime.
61518bce	2015-12-29T00:57:24	CMake: Changes to get CMake project to work with Android (thanks, Martin!). Fixes Bugzilla #3194. (but note that Bugzilla #3200 still needs to be resolved to get this really going on Android, at a minimum.)
7e679ed2	2015-12-29T00:36:03	CMake: fixed a failure to reset CMAKE_REQUIRED_FLAGS (thanks, Martin!). This would break Emscripten builds with the CMake project files (etc). Fixes Bugzilla #3197.
c9927bbb	2015-12-29T00:24:37	CMake: don't try to use the Linux joystick code on Android (thanks, Martin!). Fixes Bugzilla #3201.
7ca3b270	2015-12-29T00:02:43	CMake: Fixed to work on Windows 8 SDK (thanks, Martin!). Fixes Bugzilla #3207.
42f282cc	2015-08-28T19:10:46	Fix bug 3081: CMake configuration auto-disables OpenGL ES support on Windows. Thanks to EntranceJew for the patch.
d154e6c6	2015-08-28T19:05:24	Fixed bug 3098: CMake project never enables xinput support on Windows. Thanks to EntranceJew for debugging the issue.
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
3a84f7b5	2015-06-18T22:34:39	CMake fixes for MingW (thanks, Ozkan!). - ignore DXSDK_DIR for mingw environment - use dxerr8 instead of dxerr for mingw. Partially fixes Bugzilla #3016.
aee05522	2015-06-13T10:47:55	Fixed bug 3009 - Cannot compile SDL2 on Windows CMakeLists.txt was missing handling for running CMake with -DDIRECTX=0
f5dce3c6	2015-06-07T20:15:09	CMake: default to shared library builds being enabled.
75a3ad1d	2015-04-22T20:25:19	CMake: Slightly better fix for installation target (thanks, Anthony!). Fixes Bugzilla #2474.
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
e7ba78a3	2015-04-07T21:52:22	CMake: Dependency variable for FUSIONSOUND_SHARED was wrong (thanks, Kaleb!). Fixes Bugzilla #2055.
9470f4a2	2015-03-24T03:21:57	Better fixes for CMake subsystem enabling (thanks, Sebastian!). Fixes Bugzilla #2875.
3c76d2ff	2015-03-20T21:57:15	Several corrections to the CMake project files (thanks, Ozkan!). Fixes Bugzilla #2732.
70191a93	2015-03-20T11:51:03	CMake: Don't search for the OpenGL library on Mac OS X. It's always there.
c1091f32	2015-03-20T10:35:42	CMake project files no longer force you to link against Wayland or Mir libs.
d8988ea8	2015-03-20T10:02:45	Fixed some defaults in CMake project file. Fixes not finding dlopen(), etc.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
f15d13d6	2015-01-18T02:50:14	CMake: Removed unused variable (thanks, Felix!). "MACOSX_COREAUDIO" is actually an internal #define set up elsewhere, and this CMake var is never exported past the CMake script anyhow. Partially fixes Bugzilla #2807.
c4275f95	2015-01-17T04:36:15	Fixed bug 2807 - Not using CoreAudio on OS X when built via CMake
fe40a172	2014-12-18T00:19:52	Initial merge of Emscripten port! With this commit, you can compile SDL2 with Emscripten ( http://emscripten.org/ ), and make your SDL-based C/C++ program into a web app. This port was due to the efforts of several people, including: Charlie Birks, Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd, Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)
77ccc412	2014-12-13T02:40:52	CMake: Minor cleanup up on the new SDL_*_ENABLED_BY_DEFAULT vars.
a228b67d	2014-12-13T02:33:52	CMake: Replace "else(condition)" with "else()", etc. Bumped required CMake version to 2.8. Thanks to the SDL/Emscripten porting team for this cleanup.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
251ca855	2014-10-15T09:18:17	Expanded the iMX6 video driver into a general Vivante video driver that works across multiple SoCs
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
50cc4efe	2014-09-10T08:54:01	Freescale i.MX6 video driver --- CMakeLists.txt \| 2 + cmake/sdlchecks.cmake \| 20 +++ configure \| 51 +++++++ configure.in \| 28 ++++ include/SDL_config.h.cmake \| 1 + include/SDL_config.h.in \| 1 + src/video/SDL_sysvideo.h \| 3 + src/video/SDL_video.c \| 3 + src/video/mx6/SDL_mx6events.c \| 45 ++++++ src/video/mx6/SDL_mx6events_c.h \| 31 +++++ src/video/mx6/SDL_mx6opengles.c \| 211 ++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6opengles.h \| 68 +++++++++ src/video/mx6/SDL_mx6video.c \| 301 ++++++++++++++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6video.h \| 78 +++++++++++ 14 files changed, 843 insertions(+) create mode 100644 src/video/mx6/SDL_mx6events.c create mode 100644 src/video/mx6/SDL_mx6events_c.h create mode 100644 src/video/mx6/SDL_mx6opengles.c create mode 100644 src/video/mx6/SDL_mx6opengles.h create mode 100644 src/video/mx6/SDL_mx6video.c create mode 100644 src/video/mx6/SDL_mx6video.h
7242e814	2014-09-02T06:55:47	Updated version to 2.0.4
059579e4	2014-08-23T10:47:50	Fixed bug 2696 - Mac: fix display mode refresh rate calculation Alex Szpakowski SDL's Cocoa backend uses the CGDisplayMode API to get refresh rate information about a display mode, but CGDisplayModeGetRefreshRate will return 0 on most non-CRT monitors. The only way I know of to get correct refresh rate information in OS X is via the CoreVideo DisplayLink API. I have attached a patch which tries to use the CVDisplayLinkGetNominalOutputVideoRefreshPeriod function if CGDisplayModeGetRefreshRate fails, which fixes display mode refresh rate information on the monitors I tested. The CVDisplayLink API requires linking with the CoreVideo framework, and the patch updates the various build files to do so.
04f74225	2014-08-19T21:13:07	Fixed bug 2691 - Disabling shared library prevent cmake configuration hotgloupi Configuring using "cmake -DSDL_STATIC=1 -DSDL_SHARED=0" generate and error in CMakeLists.txt at line 1334: CMake Error at CMakeLists.txt:1334 (install): install TARGETS given target "SDL2" which does not exist in this directory. This install rule shouldn't be present when the DLL has been disabled
f17587df	2014-08-17T13:49:53	Reset CMAKE_REQUIRED_FLAGS after test
95ced654	2014-08-17T13:15:45	cmake: add -Wl,--no-undefined to GCC linker flags This way unresolved symbols will be detected when linking the shared library version.
569e595a	2014-08-17T13:15:09	cmake: add -Wall/-Wshadow to GCC compilation flags
1ea86978	2014-08-17T13:11:55	Removed SDL_round() because the license wasn't compatible with zlib
984d0fc4	2014-08-16T23:28:40	Fixed bug 2683 - Raspberry PI support using CMake Tobias Himmer this patch adds a check to the CMake build script to detect whether the VideoCore API is available. If it is found, it enables SDL_VIDEO_DRIVER_RPI and will also add the needed include/library directory flags to CMAKE_C_FLAGS so the subsequent check for GLES succeeds in picking up the headers. Seems to work fine on Raspbian.

2cdb9674

2017-09-10T10:25:36

Fixed the include path for khronos with Visual Studio

f465f24d

2017-09-09T08:36:37

Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.

347fe704

2017-08-30T14:25:01

Fixed bug 3789 - Android : small clean up Sylvain Since https://hg.libsdl.org/SDL/rev/6546daa45a02 SDL_android_main.c is empty and then produce a warning nativeInit does not exist and dont need to be mark undefined

e53c5c5c

2017-08-30T00:40:06

Fix QNX build - prioritize system EGL headers over the Khronos ones

92bf6085

2017-08-29T22:04:43

Fixed bug 3616 - SDL_GL_CreateContext fails with SDL_GL_CONTEXT_DEBUG_FLAG and ANGLE/GLES 2.0 Colin Barrett Using the pre-built x86 devel libs from here: https://www.libsdl.org/release/SDL2-devel-2.0.5-VC.zip If I have: SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 2); SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 0); SDL_GL_SetAttribute(SDL_GL_CONTEXT_FLAGS, SDL_GL_CONTEXT_DEBUG_FLAG); and I'm using ANGLE/(a GL driver that doesn't provide an ES2 context) such that SDL_EGL_CreateContext is called by SDL_GL_CreateContext, I get the error "Could not create EGL context (context attributes are not supported)" and no context is created. Looking at the code in SDL_EGL_CreateContext - if gl_config.flags is non-zero, it looks like the code in the section guarded with "#ifdef EGL_KHR_create_context" should be executed - but it apparently isn't. Is it possible this section hasn't been compiled into the pre-built libraries? If I build SDL2.dll myself using the Visual C++ solution (VS2015 Community Update 3) then the call succeeds as I expect

c0530bcd

2017-08-28T22:42:41

We removed QuartzCore link dependency in commit 5be6badaf7e1

ce2b1644

2017-08-28T00:11:38

Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration

ea91908e

2017-08-27T23:39:38

Fixed Android ABI check to match vulkan/vk_platform.h

c722e58d

2017-08-27T23:25:12

vulkan: Include a copy of vulkan.h and vk_platform.h. Now we can provide Vulkan support in the build even if the build box doesn't have a Vulkan SDK, since we dynamically link to the library anyhow.

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

5ca01522

2017-08-26T21:17:12

Fixed bug 3774 - Cmake build fails for Android sfalexrog Android haptic code was not added to CMakeLists.txt, leading to build failures when targeting Android platform. Attached patch adds Android haptic driver to source sets and adds configuration parameter to SDL_config.h.cmake.

f807655b

2017-08-21T11:25:04

Fixed bug 3761 - Windows non-MinGW cmake build defines HAVE_WCSLCPY and HAVE_WCSLCAT Tom Seddon https://github.com/SDL-mirror/SDL/commit/0f0ad62237fabb58d5811fe6fa59e5e5aa0e2fb5 (git head at the time of writing); Visual Studio 2015, toolset v140, Platform 10.0.14393.0, building for x64 Windows non-MinGW cmake build sets defines implying wcslcpy and wcslcat are available, but Windows doesn't have these functions. Ryan C. Gordon That's weird, these are the exact two functions that Emscripten incorrectly believed it had until we upgraded the buildbot's emsdk install. Not sure what's up with this, but it's possibly not a MingW-specific thing!

a78c20ae

2017-08-21T11:17:38

configury: check mmdeviceapi.h and audioclient.h before enabling wasapi.

2dc5d32f

2017-08-18T18:16:37

Updated version to 2.0.6

5c4a45f1

2017-08-18T20:25:14

cmake: some iOS fixes (don't link to Cocoa or Carbon frameworks). Fixes Bugzilla #3625.

f4011bf0

2017-08-18T20:00:29

cmake: added a FIXME for later. Have to figure out what cmake version fixed this and bump the minimum to that.

f75caa2f

2017-08-18T18:52:25

cmake: Fix building for macOS with Xcode generator (thanks, dungaipara!). Fixes Bugzilla #3625.

47beda97

2017-08-17T15:44:47

cmake: add core/unix sources to the build. Fixes Bugzilla #3757.

fb835f9e

2017-08-14T20:22:19

Fixed bug 2330 - Debian bug report: SDL2 X11 driver buffer overflow with large X11 file descriptor manuel.montezelo Original bug report (note that it was against 2.0.0, it might have been fixed in between): http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733015 -------------------------------------------------------- Package: libsdl2-2.0-0 Version: 2.0.0+dfsg1-3 Severity: normal Tags: patch I have occasional crashes here caused by the X11 backend of SDL2. It seems to be caused by the X11_Pending function trying to add a high number (> 1024) file descriptor to a fd_set before doing a select on it to avoid busy waiting on X11 events. This causes a buffer overflow because the file descriptor is larger (or equal) than the limit FD_SETSIZE. Attached is a possible workaround patch. Please also keep in mind that fd_set are also used in following files which may have similar problems. src/audio/bsd/SDL_bsdaudio.c src/audio/paudio/SDL_paudio.c src/audio/qsa/SDL_qsa_audio.c src/audio/sun/SDL_sunaudio.c src/joystick/linux/SDL_sysjoystick.c -------------------------------------------------------- On Tuesday 24 December 2013 00:43:13 Sven Eckelmann wrote: > I have occasional crashes here caused by the X11 backend of SDL2. It seems > to be caused by the X11_Pending function trying to add a high number (> > 1024) file descriptor to a fd_set before doing a select on it to avoid busy > waiting on X11 events. This causes a buffer overflow because the file > descriptor is larger (or equal) than the limit FD_SETSIZE. I personally experienced this problem while hacking on the python bindings package for SDL2 [1] (while doing make runtest). But it easier to reproduce in a smaller, synthetic testcase.

f8de064c

2017-08-13T22:26:44

Added wchar.h to fix build on some platforms with new wcs* functions

f1829d95

2017-08-13T20:37:49

Added SDL_wcscmp()

75d5f343

2017-08-11T21:17:10

Forgot to add function check for fopen64 to CMake build

73c6cebb

2017-08-09T22:43:16

cmake: Pacify warning about Policy CMP0042 not being set.

496337b3

2017-08-09T19:03:10

Fixed bug 3651 - CMake build does not install CMake package configuration tschwinger@elitemail.org Most ironically, although autoconf/automake-based builds install (pretty half-assed) CMake package configuration files, they're missing in installations resulting from CMake-based builds entirely. A proper configuration file typically also loads target exports (implemented in patch 3572, also fixing this issue - see my comment on that issue for details). I believe it would be best to let the dinosaurs go extinct and redirect all build efforts to the CMake end for two reasons: 1. It potentially provides the best user experience, but you'd have to give it some love and ship with less quirky buildfiles. 2. It would force distros to build SDL via CMake and thus would ensure target exports are actually available everywhere. Various CMake patches I submitted today in summary (directly converted from the HG commits and `am`d onto a fork of a git mirror that happened to be on `tip`). https://github.com/tschw/SDL/commits/patched Fixing #2576 #3572, #3613, and this fresh ticket, which is almost entirely advertisement ;). These already do to make SDL much less of a quirky fella to have in your dependency tree...

56363ebf

2017-08-02T10:22:48

Fixed bug 3690 - SDL2 KMS/DRM render context support Manuel The attached patch adds support for KMS/DRM context graphics. It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation. Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition. X86 systems use KMS right away in every current GNU/Linux system. Simple build instructions: $./autogen.sh $./configure --enable-video-kmsdrm $make

3c09265d

2017-07-10T18:31:28

Fixed bug 3609 - Windows build fails due to conflicting types for 'XINPUT_GAMEPAD_EX' Ozkan Sezer (In reply to Ryan C. Gordon from comment #9) > I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can > you verify this works on the latest MinGW? > > Thanks, > --ryan. This patch is wrong: the structure in question has nothing to do with any gcc version in use. I suggest reverting this adding a conigury check for it, instead. Something like the following should do it: (configure needs regenerating.)

c1cd93e5

2017-06-12T16:35:34

Fixed bug 3670 - CMake IOS haptic error

e5f4a71f

2017-06-11T16:00:45

cmake: iOS haptic section was referencing power source code (thanks, Martin!). Fixes Bugzilla #3670.

2b5a5c51

2017-06-08T22:07:55

Android build fixes -Enabling checking for GCC_ATOMICS also on clang by default. This way all Android ABIs build successfully -Android cmake: Threading was not enabled correctly -Android cmake: Timers and dynamic lib loading were not included in the sources

d9039f23

2017-06-08T13:27:58

jack: Initial shot at a JACK audio target. http://jackaudio.org/ Fixes Bugzilla #2163. (with several more commits following to improve this code.)

dc8a22cd

2017-06-06T13:39:29

cmake: don't use /NODEFAULTLIB if we are using the C runtime (thanks, Rob!). Fixes Bugzilla #3640.

11289b76

2017-06-04T21:25:57

Android cmake build fixed to work with the official android gradle plugin

a7fc2822

2017-05-24T19:56:59

audio: rename bsd target to netbsd. Apparently this is no longer a generic BSD audio target, and hasn't been for years, so rename it for NetBSD.

0e7530b0

2017-02-23T22:38:04

cmake: add WASAPI audio target to the build (thanks, Martin!). Fixes Bugzilla #3588.

5ea0c893

2017-01-24T12:20:41

CMake: fixed logic error in setting -mfpmath=387. Fixes Bugzilla #3565.

3594bf8e

2017-01-23T01:05:44

audio: Wired up new SSE code to build system.

df25258a

2017-01-06T20:43:53

Added configure and cmake support for libsamplerate

35430a73

2016-11-17T01:15:16

cpuinfo: first attempt at SDL_HasNEON() implementation.

f3502c3c

2016-10-14T01:04:21

Fixed building with cmake when fcitx isn't installed

34eebfba

2016-10-03T03:42:10

Fixed setting the version info in the shared library when using CMake Ray Molenkamp When building sdl as shared lib, the version info is lacking in the final binary. CMake gathers the right resource files into ${VERSION_SOURCES} but then doesn't do anything with them.

c9be93c6

2016-10-01T15:11:18

Fixed bug 3078 - cmake: fix sdl2.m4 install location on cross hosts Timo Gurr On cross hosts running autotools for SDL2_gfx-1.0.1 fails to find sdl2.m4: eautoreconf: running in /var/tmp/paludis/build/media-libs-SDL2_gfx-1.0.1/work/SDL2_gfx-1.0.1 ... aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library libtoolize --copy --force --automake aclocal aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in' configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library autoconf configure.in:128: error: possibly undefined macro: AM_PATH_SDL2 If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. * Failed Running autoconf ! SDL2 installs it to /usr/x86_64-pc-linux-gnu/share/aclocal on cross hosts, attached patch makes use of CMAKE_INSTALL_FULL_DATAROOTDIR to support correctly installing to the arch independent location /usr/share/aclocal.

571f4ce8

2016-10-01T17:05:29

Fix CMake setting an incorrect video backend on iOS

671f2a49

2016-10-01T12:54:48

Fixed bug 3268 - CMAKE: ios fixes Martin Gerhardy ios is not properly handled in the cmake file. this patch is a start to do so - it properly builds for me with it.

bb24662c

2016-10-01T12:48:08

Fixed bug 3301 - IBus support on Linux with CMake joe.gsoc16 I recently looked into Unicode support in SDL2 and realized that SDL_TEXTEDITING doesn't get triggered at all (Japanese IME). According to others on IRC it works fine on Windows/Mac but not for me on (arch)Linux. When compiling SDL with autotools, IBus support is enabled by default but not so with CMake. I never used CMake before but got it working and also included that pkg-config determines flags for dbus (FIXME in CMakeLists).

e45698d2

2016-09-28T22:24:01

Updated version to 2.0.5 in preparation for release

e5070d20

2016-09-15T08:57:56

Fixed set of libraries needed to build on Mac OS X

93d42e2d

2016-09-15T08:46:14

Hopefully fixed the cmake build on Mac OS X

264e996e

2016-09-13T00:03:50

Fix CMake CMAKE_REQUIRED_FLAGS handling to preserve existing CMake flags required by Emscripten toolchain.

42feccea

2016-09-13T00:03:40

Include timers when using cmake (#29)

6188c334

2016-09-04T01:42:46

mac: Patched to compile with CMake project.

2c3bf665

2016-03-18T22:15:53

Windows CMake: don't try to link dxguid, it's unavailable when using Visual Studio's XP-compatible toolset.

e5d575b9

2016-01-16T21:58:49

Expose the EGL display and window for Vivante SDL windows

1615b2e2

2016-01-08T07:32:51

CMake: only set "-O3 -g" defaults if CMAKE_BUILD_TYPE wasn't set at all.

757e994e

2016-01-07T17:21:50

Fixed --enable-new-dtags check with cmake

dc5f05bb

2016-01-07T16:42:30

Use --enable-new-dtags to set RUNPATH rather than RPATH so that LD_LIBRARY_PATH is not overridden by the application.

bb1e2bd0

2016-01-05T05:44:32

CMake: Turned off Mac OS X rpath warning kludge. Apparently CMake errors out if it doesn't know this policy, and we don't otherwise require CMake 3.0 yet. Sigh.

e6e62bee

2016-01-05T01:26:32

CMake: Let static libraries optionally be built with Position Independent Code.

008a6abd

2016-01-05T01:25:54

CMake: use the old MACOSX_RPATH behavior (for now), silence the warning.

1373e890

2016-01-04T22:58:38

Try to build with GCC's -Wdeclaration-after-statement. This will help catch things that'll cause issues on C89 compilers before we send them on to fail on Buildbot.

1240f8e0

2016-01-03T20:52:44

CMake: Don't make a libSDL2.so symlink on Mac OS X (do .dylib instead).

b0d8dfcd

2015-12-31T15:26:40

CMake: Fixed building for Windows with VS2015 (bug #3080). - Don't try to link with the Visual C runtime. - Avoid code generation that would use functions from the VC runtime.

61518bce

2015-12-29T00:57:24

CMake: Changes to get CMake project to work with Android (thanks, Martin!). Fixes Bugzilla #3194. (but note that Bugzilla #3200 still needs to be resolved to get this really going on Android, at a minimum.)

7e679ed2

2015-12-29T00:36:03

CMake: fixed a failure to reset CMAKE_REQUIRED_FLAGS (thanks, Martin!). This would break Emscripten builds with the CMake project files (etc). Fixes Bugzilla #3197.

c9927bbb

2015-12-29T00:24:37

CMake: don't try to use the Linux joystick code on Android (thanks, Martin!). Fixes Bugzilla #3201.

7ca3b270

2015-12-29T00:02:43

CMake: Fixed to work on Windows 8 SDK (thanks, Martin!). Fixes Bugzilla #3207.

42f282cc

2015-08-28T19:10:46

Fix bug 3081: CMake configuration auto-disables OpenGL ES support on Windows. Thanks to EntranceJew for the patch.

d154e6c6

2015-08-28T19:05:24

Fixed bug 3098: CMake project never enables xinput support on Windows. Thanks to EntranceJew for debugging the issue.

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

3a84f7b5

2015-06-18T22:34:39

CMake fixes for MingW (thanks, Ozkan!). - ignore DXSDK_DIR for mingw environment - use dxerr8 instead of dxerr for mingw. Partially fixes Bugzilla #3016.

aee05522

2015-06-13T10:47:55

Fixed bug 3009 - Cannot compile SDL2 on Windows CMakeLists.txt was missing handling for running CMake with -DDIRECTX=0

f5dce3c6

2015-06-07T20:15:09

CMake: default to shared library builds being enabled.

75a3ad1d

2015-04-22T20:25:19

CMake: Slightly better fix for installation target (thanks, Anthony!). Fixes Bugzilla #2474.

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

e7ba78a3

2015-04-07T21:52:22

CMake: Dependency variable for FUSIONSOUND_SHARED was wrong (thanks, Kaleb!). Fixes Bugzilla #2055.

9470f4a2

2015-03-24T03:21:57

Better fixes for CMake subsystem enabling (thanks, Sebastian!). Fixes Bugzilla #2875.

3c76d2ff

2015-03-20T21:57:15

Several corrections to the CMake project files (thanks, Ozkan!). Fixes Bugzilla #2732.

70191a93

2015-03-20T11:51:03

CMake: Don't search for the OpenGL library on Mac OS X. It's always there.

c1091f32

2015-03-20T10:35:42

CMake project files no longer force you to link against Wayland or Mir libs.

d8988ea8

2015-03-20T10:02:45

Fixed some defaults in CMake project file. Fixes not finding dlopen(), etc.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

f15d13d6

2015-01-18T02:50:14

CMake: Removed unused variable (thanks, Felix!). "MACOSX_COREAUDIO" is actually an internal #define set up elsewhere, and this CMake var is never exported past the CMake script anyhow. Partially fixes Bugzilla #2807.

c4275f95

2015-01-17T04:36:15

Fixed bug 2807 - Not using CoreAudio on OS X when built via CMake

fe40a172

2014-12-18T00:19:52

Initial merge of Emscripten port! With this commit, you can compile SDL2 with Emscripten ( http://emscripten.org/ ), and make your SDL-based C/C++ program into a web app. This port was due to the efforts of several people, including: Charlie Birks, Sathyanarayanan Gunasekaran, Jukka Jyl?nki, Alon Zakai, Edward Rudd, Bruce Mitchener, and Martin Gerhardy. (Thanks, everyone!)

77ccc412

2014-12-13T02:40:52

CMake: Minor cleanup up on the new SDL_*_ENABLED_BY_DEFAULT vars.

a228b67d

2014-12-13T02:33:52

CMake: Replace "else(condition)" with "else()", etc. Bumped required CMake version to 2.8. Thanks to the SDL/Emscripten porting team for this cleanup.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

251ca855

2014-10-15T09:18:17

Expanded the iMX6 video driver into a general Vivante video driver that works across multiple SoCs

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

50cc4efe

2014-09-10T08:54:01

Freescale i.MX6 video driver --- CMakeLists.txt | 2 + cmake/sdlchecks.cmake | 20 +++ configure | 51 +++++++ configure.in | 28 ++++ include/SDL_config.h.cmake | 1 + include/SDL_config.h.in | 1 + src/video/SDL_sysvideo.h | 3 + src/video/SDL_video.c | 3 + src/video/mx6/SDL_mx6events.c | 45 ++++++ src/video/mx6/SDL_mx6events_c.h | 31 +++++ src/video/mx6/SDL_mx6opengles.c | 211 ++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6opengles.h | 68 +++++++++ src/video/mx6/SDL_mx6video.c | 301 ++++++++++++++++++++++++++++++++++++++++ src/video/mx6/SDL_mx6video.h | 78 +++++++++++ 14 files changed, 843 insertions(+) create mode 100644 src/video/mx6/SDL_mx6events.c create mode 100644 src/video/mx6/SDL_mx6events_c.h create mode 100644 src/video/mx6/SDL_mx6opengles.c create mode 100644 src/video/mx6/SDL_mx6opengles.h create mode 100644 src/video/mx6/SDL_mx6video.c create mode 100644 src/video/mx6/SDL_mx6video.h

7242e814

2014-09-02T06:55:47

Updated version to 2.0.4

059579e4

2014-08-23T10:47:50

Fixed bug 2696 - Mac: fix display mode refresh rate calculation Alex Szpakowski SDL's Cocoa backend uses the CGDisplayMode API to get refresh rate information about a display mode, but CGDisplayModeGetRefreshRate will return 0 on most non-CRT monitors. The only way I know of to get correct refresh rate information in OS X is via the CoreVideo DisplayLink API. I have attached a patch which tries to use the CVDisplayLinkGetNominalOutputVideoRefreshPeriod function if CGDisplayModeGetRefreshRate fails, which fixes display mode refresh rate information on the monitors I tested. The CVDisplayLink API requires linking with the CoreVideo framework, and the patch updates the various build files to do so.

04f74225

2014-08-19T21:13:07

Fixed bug 2691 - Disabling shared library prevent cmake configuration hotgloupi Configuring using "cmake -DSDL_STATIC=1 -DSDL_SHARED=0" generate and error in CMakeLists.txt at line 1334: CMake Error at CMakeLists.txt:1334 (install): install TARGETS given target "SDL2" which does not exist in this directory. This install rule shouldn't be present when the DLL has been disabled

f17587df

2014-08-17T13:49:53

Reset CMAKE_REQUIRED_FLAGS after test

95ced654

2014-08-17T13:15:45

cmake: add -Wl,--no-undefined to GCC linker flags This way unresolved symbols will be detected when linking the shared library version.

569e595a

2014-08-17T13:15:09

cmake: add -Wall/-Wshadow to GCC compilation flags

1ea86978

2014-08-17T13:11:55

Removed SDL_round() because the license wasn't compatible with zlib

984d0fc4

2014-08-16T23:28:40

Fixed bug 2683 - Raspberry PI support using CMake Tobias Himmer this patch adds a check to the CMake build script to detect whether the VideoCore API is available. If it is found, it enables SDL_VIDEO_DRIVER_RPI and will also add the needed include/library directory flags to CMAKE_C_FLAGS so the subsequent check for GLES succeeds in picking up the headers. Seems to work fine on Raspbian.

kc3-lang/SDL/CMakeLists.txt

CMakeLists.txt

Log