kmx git

Commit	Date	Message
94754c39	2017-02-20T10:55:33	Updated config headers to override the base SDL_config.h if both are included
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
36156335	2016-11-20T21:34:54	Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain
83cb2b63	2016-10-14T06:57:55	Fixed bug 2758 - Android issues with NDK r10c and API-21 Sylvain After a long time, I found out more clearly what was going wrong. The native libraries should be built with a "APP_PLATFORM" as low as possible. Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml So that the application never runs on a lower APP_PLATFORM than it has been built for. An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10 (If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10. And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".) to precise what happened in the initial reported test-case: Let say the "c" code contains a call to "srand()". with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()". with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()". but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()). So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10. That was the issue. The path tried to fix this by in fact always calling srand48(). SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform. It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions. Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
f71fa2f4	2015-06-19T23:40:23	Android has clock_gettime() - thanks Michael Labbe!
45989035	2015-06-17T00:07:45	Partial fix for bug 2758 - Android issues with NDK r10c and API-21 Sylvain When using API 21 and running on an old device (android < 5.0 ?) some function are missing. functions are (at least) : signal, sigemptyset, atof, stpcpy (strcat and strcpy), srand, rand. Very few modifications on SDL to get this working : on SDL ====== Undefine android configuration : HAVE_SIGNAL HAVE_SIGACTION HAVE_ATOF In "SDL_systrhead.c", comment out the few block of lines with "sigemptyset". Android.mk: remove the compilation of "test" directory because it contains a few rand/srand calls Also, there are more discussions about this in internet : https://groups.google.com/forum/#!topic/android-ndk/RjO9WmG9pfE http://stackoverflow.com/questions/25475055/android-ndk-load-library-cannot-locate-srand
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
1ea86978	2014-08-17T13:11:55	Removed SDL_round() because the license wasn't compatible with zlib
4e7db78e	2014-08-16T23:23:15	Added SDL_round(), contributed by Benoit Pierre - thanks!
05d87800	2014-08-11T17:25:53	Implemented SDL_GetPrefPath() on Android - it returns the path used by SDL_AndroidGetInternalStoragePath()
6101e4b2	2014-06-07T18:20:01	Added SDL_sqrtf(), SDL_tan(), SDL_tanf()
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
b5a6c407	2013-12-16T10:03:26	[Android] Define SDL_VIDEO_OPENGL_ES2
d01ad02b	2013-12-09T15:17:20	Hook up SDL_acos and SDL_asin properly.
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
5c383489	2013-11-24T23:36:15	We don't need to check for snprintf() anymore, we don't use it. SDL_snprintf() is built on vsnprintf() where available.
e7693740	2013-11-24T23:35:38	Added SDL_vsscanf().
2dd7091e	2013-08-20T19:57:11	Added SDL_GetBasePath() and SDL_GetPrefPath() in new filesystem module.
0eeb76d8	2013-08-19T16:29:46	Fixes bug #2037, common EGL code for Android and X11
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

94754c39

2017-02-20T10:55:33

Updated config headers to override the base SDL_config.h if both are included

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

36156335

2016-11-20T21:34:54

Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain

83cb2b63

2016-10-14T06:57:55

Fixed bug 2758 - Android issues with NDK r10c and API-21 Sylvain After a long time, I found out more clearly what was going wrong. The native libraries should be built with a "APP_PLATFORM" as low as possible. Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml So that the application never runs on a lower APP_PLATFORM than it has been built for. An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10 (If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10. And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".) to precise what happened in the initial reported test-case: Let say the "c" code contains a call to "srand()". with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()". with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()". but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()). So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10. That was the issue. The path tried to fix this by in fact always calling srand48(). SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform. It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions. Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

f71fa2f4

2015-06-19T23:40:23

Android has clock_gettime() - thanks Michael Labbe!

45989035

2015-06-17T00:07:45

Partial fix for bug 2758 - Android issues with NDK r10c and API-21 Sylvain When using API 21 and running on an old device (android < 5.0 ?) some function are missing. functions are (at least) : signal, sigemptyset, atof, stpcpy (strcat and strcpy), srand, rand. Very few modifications on SDL to get this working : on SDL ====== Undefine android configuration : HAVE_SIGNAL HAVE_SIGACTION HAVE_ATOF In "SDL_systrhead.c", comment out the few block of lines with "sigemptyset". Android.mk: remove the compilation of "test" directory because it contains a few rand/srand calls Also, there are more discussions about this in internet : https://groups.google.com/forum/#!topic/android-ndk/RjO9WmG9pfE http://stackoverflow.com/questions/25475055/android-ndk-load-library-cannot-locate-srand

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

1ea86978

2014-08-17T13:11:55

Removed SDL_round() because the license wasn't compatible with zlib

4e7db78e

2014-08-16T23:23:15

Added SDL_round(), contributed by Benoit Pierre - thanks!

05d87800

2014-08-11T17:25:53

Implemented SDL_GetPrefPath() on Android - it returns the path used by SDL_AndroidGetInternalStoragePath()

6101e4b2

2014-06-07T18:20:01

Added SDL_sqrtf(), SDL_tan(), SDL_tanf()

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

58edac3e

2014-02-02T00:53:27

b5a6c407

2013-12-16T10:03:26

[Android] Define SDL_VIDEO_OPENGL_ES2

d01ad02b

2013-12-09T15:17:20

Hook up SDL_acos and SDL_asin properly.

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

5c383489

2013-11-24T23:36:15

We don't need to check for snprintf() anymore, we don't use it. SDL_snprintf() is built on vsnprintf() where available.

e7693740

2013-11-24T23:35:38

Added SDL_vsscanf().

2dd7091e

2013-08-20T19:57:11

Added SDL_GetBasePath() and SDL_GetPrefPath() in new filesystem module.

0eeb76d8

2013-08-19T16:29:46

Fixes bug #2037, common EGL code for Android and X11

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/include/SDL_config_android.h

include/SDL_config_android.h

Log