kmx git

Commit	Date	Message
11c348b4	2018-01-17T11:53:09	SDL_log10
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
351d6d47	2017-12-06T12:24:32	audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI
afbba182	2017-11-04T18:01:03	Fixed compiling on Windows with HAVE_LIBC enabled
bcdf8b91	2017-11-04T17:35:03	Added SDL_fmod() and SDL_fmodf()
16b8c4ea	2017-09-10T10:30:25	Fixed bug 3811 - change HAVE_COPYSIGN to HAVE__COPYSIGN in SDL_config_windows.h Ozkan Sezer The patch below changes HAVE_COPYSIGN macro in SDL_config_windows.h to HAVE__COPYSIGN, so that _copysign() can be used in SDL_stdlib.h which is available in many more windows-targeting toolchains such as MinGW, MSVC >= 6, etc, and not just MSVC >= 2013. SDL_stdlib.c already has a specific check for HAVE__COPYSIGN, so I believe this is reasonable.
be1caece	2017-09-10T09:19:10	Correction: copysign has been supported by windows several toolchains for a very long time, including MSVC6, MinGW, LCC-Win32, (no released watcom versions though, but that's of no concern.) Patch from Ozkan Sezer
f465f24d	2017-09-09T08:36:37	Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.
d51dc737	2017-09-06T01:14:23	Fixed bug 3797 - configure check for float.h Ozkan Sezer Cmake checks for float.h, but configure does not: the attached patch adds float.h to checked headers in configury, and it adds the missing HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in. In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H as 1, where I know that it's true.
ce2b1644	2017-08-28T00:11:38	Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration
25e3a1ec	2017-08-27T22:15:57	vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
30d554e3	2017-08-19T03:07:44	Fixed building SDL applications with Visual Studio and the clang toolset Also fixed building 64-bit SDL with clang. 32-bit doesn't build because of the inline assembly for C runtime support.
94754c39	2017-02-20T10:55:33	Updated config headers to override the base SDL_config.h if both are included
6046fd4c	2017-02-14T03:03:27	wasapi: Initial WASAPI support, for Windows Vista and later. This should remain binary compatible with Windows XP, as we dynamically load anything we need and fall back to DirectSound/WinMM/XAudio2 if not available.
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
36156335	2016-11-20T21:34:54	Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
1ea86978	2014-08-17T13:11:55	Removed SDL_round() because the license wasn't compatible with zlib
4e7db78e	2014-08-16T23:23:15	Added SDL_round(), contributed by Benoit Pierre - thanks!
b79e7f32	2014-07-03T15:39:55	Split the XInput and DirectInput code so Windows RT can use the existing XInput support.
6101e4b2	2014-06-07T18:20:01	Added SDL_sqrtf(), SDL_tan(), SDL_tanf()
2a7aa9bd	2014-05-06T00:13:07	Fix build on Windows targets without dxgi.h, like MingW32.
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
7d98754a	2014-03-10T19:11:50	Temporarily disabled the D3D11 renderer so we can get a build.
1a35f32b	2014-03-10T01:51:03	Converted David Ludwig's D3D11 renderer to C and optimized it. The D3D11 renderer is now slightly faster than D3D9 on my Windows 8 machine (testsprite2 runs at 3400 FPS vs 3100 FPS) This will need tweaking to fix the Windows RT build.
58edac3e	2014-02-02T00:53:27	Fixed bug 2374 - Update copyright for 2014... Is it that time already??
d01ad02b	2013-12-09T15:17:20	Hook up SDL_acos and SDL_asin properly.
f848adff	2013-11-29T10:06:08	Improve Android pause/resume behavior.
e7693740	2013-11-24T23:35:38	Added SDL_vsscanf().
61959aa6	2013-11-22T13:24:53	OpenGL ES support for Windows
080c919b	2013-10-13T19:51:58	Fixed function feature test for Visual Studio 2012 norfanin Fixes the version check for some functions that are only present with the MSVC 2013 CRT libraries. I did my testing wrong and failed to see that 2012 doesn't have these functions. Microsoft implemented them in their upcoming 2013 version, though. The attached patch changes it to the check for the next version. I also removed the HAVE_ITOA because that would require linking with oldnames.lib and it's easier to just let the SDL implementation take over.
99789c71	2013-09-28T10:30:51	Fixed bug 1820 - building SDL as a static library with static runtime doesn't compile/link with visual studio norfanin Adds a condition so only the MSVC 2012 compiler defines the macros for the functions of its version. Attaching a patch that adds a condition so that the HAVE_X supported by MSVC 2012 only get defined with that compiler. MSVC 2008 and 2010 will then build without any modification to the SDL source code. Also moved HAVE_M_PI to a separate check. The Microsoft headers require _USE_MATH_DEFINES to be defined before they define the constants.
2dd7091e	2013-08-20T19:57:11	Added SDL_GetBasePath() and SDL_GetPrefPath() in new filesystem module.
dad42067	2013-08-12T11:13:50	Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.
1ad936eb	2013-08-11T19:56:43	Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

11c348b4

2018-01-17T11:53:09

SDL_log10

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

351d6d47

2017-12-06T12:24:32

audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI

afbba182

2017-11-04T18:01:03

Fixed compiling on Windows with HAVE_LIBC enabled

bcdf8b91

2017-11-04T17:35:03

Added SDL_fmod() and SDL_fmodf()

16b8c4ea

2017-09-10T10:30:25

Fixed bug 3811 - change HAVE_COPYSIGN to HAVE__COPYSIGN in SDL_config_windows.h Ozkan Sezer The patch below changes HAVE_COPYSIGN macro in SDL_config_windows.h to HAVE__COPYSIGN, so that _copysign() can be used in SDL_stdlib.h which is available in many more windows-targeting toolchains such as MinGW, MSVC >= 6, etc, and not just MSVC >= 2013. SDL_stdlib.c already has a specific check for HAVE__COPYSIGN, so I believe this is reasonable.

be1caece

2017-09-10T09:19:10

Correction: copysign has been supported by windows several toolchains for a very long time, including MSVC6, MinGW, LCC-Win32, (no released watcom versions though, but that's of no concern.) Patch from Ozkan Sezer

f465f24d

2017-09-09T08:36:37

Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.

d51dc737

2017-09-06T01:14:23

Fixed bug 3797 - configure check for float.h Ozkan Sezer Cmake checks for float.h, but configure does not: the attached patch adds float.h to checked headers in configury, and it adds the missing HAVE_FLOAT_H macro to SDL_config.h.cmake and SDL_config.h.in. In SDL_config_macosx.h and SDL_config_windows.h, defined HAVE_FLOAT_H as 1, where I know that it's true.

ce2b1644

2017-08-28T00:11:38

Be clear that disabling Vulkan surface support disables the entire SDL Vulkan integration

25e3a1ec

2017-08-27T22:15:57

vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.

30d554e3

2017-08-19T03:07:44

Fixed building SDL applications with Visual Studio and the clang toolset Also fixed building 64-bit SDL with clang. 32-bit doesn't build because of the inline assembly for C runtime support.

94754c39

2017-02-20T10:55:33

Updated config headers to override the base SDL_config.h if both are included

6046fd4c

2017-02-14T03:03:27

wasapi: Initial WASAPI support, for Windows Vista and later. This should remain binary compatible with Windows XP, as we dynamically load anything we need and fall back to DirectSound/WinMM/XAudio2 if not available.

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

36156335

2016-11-20T21:34:54

Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

1ea86978

2014-08-17T13:11:55

Removed SDL_round() because the license wasn't compatible with zlib

4e7db78e

2014-08-16T23:23:15

Added SDL_round(), contributed by Benoit Pierre - thanks!

b79e7f32

2014-07-03T15:39:55

Split the XInput and DirectInput code so Windows RT can use the existing XInput support.

6101e4b2

2014-06-07T18:20:01

Added SDL_sqrtf(), SDL_tan(), SDL_tanf()

2a7aa9bd

2014-05-06T00:13:07

Fix build on Windows targets without dxgi.h, like MingW32.

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

7d98754a

2014-03-10T19:11:50

Temporarily disabled the D3D11 renderer so we can get a build.

1a35f32b

2014-03-10T01:51:03

Converted David Ludwig's D3D11 renderer to C and optimized it. The D3D11 renderer is now slightly faster than D3D9 on my Windows 8 machine (testsprite2 runs at 3400 FPS vs 3100 FPS) This will need tweaking to fix the Windows RT build.

58edac3e

2014-02-02T00:53:27

d01ad02b

2013-12-09T15:17:20

Hook up SDL_acos and SDL_asin properly.

f848adff

2013-11-29T10:06:08

Improve Android pause/resume behavior.

e7693740

2013-11-24T23:35:38

Added SDL_vsscanf().

61959aa6

2013-11-22T13:24:53

OpenGL ES support for Windows

080c919b

2013-10-13T19:51:58

Fixed function feature test for Visual Studio 2012 norfanin Fixes the version check for some functions that are only present with the MSVC 2013 CRT libraries. I did my testing wrong and failed to see that 2012 doesn't have these functions. Microsoft implemented them in their upcoming 2013 version, though. The attached patch changes it to the check for the next version. I also removed the HAVE_ITOA because that would require linking with oldnames.lib and it's easier to just let the SDL implementation take over.

99789c71

2013-09-28T10:30:51

Fixed bug 1820 - building SDL as a static library with static runtime doesn't compile/link with visual studio norfanin Adds a condition so only the MSVC 2012 compiler defines the macros for the functions of its version. Attaching a patch that adds a condition so that the HAVE_X supported by MSVC 2012 only get defined with that compiler. MSVC 2008 and 2010 will then build without any modification to the SDL source code. Also moved HAVE_M_PI to a separate check. The Microsoft headers require _USE_MATH_DEFINES to be defined before they define the constants.

2dd7091e

2013-08-20T19:57:11

Added SDL_GetBasePath() and SDL_GetPrefPath() in new filesystem module.

dad42067

2013-08-12T11:13:50

Fixes #2022, do not resume on Android when surfaceChanged If the app is in landscape mode and the user presses the power button, a pause is followed immediately by a surfaceChanged event because the lock screen is shown in portrait mode. This triggers a "false" resume. So, we just pause and resume following the onWindowFocusChanged events. Also, wait for SDL_APP_WILLENTERBACKGROUND and SDL_APP_DIDENTERBACKGROUND before blocking the event pump.

1ad936eb

2013-08-11T19:56:43

Fixed bug 2027 - Full-screen appears to be broken - hang in SDL_DestroyWindow() Rainer Deyke I'm running Linux Mint 15 with the Cinnamon window manager. SDL_DestroyWindow consistently locks up for me when the window if fullscreen.

kc3-lang/SDL/include/SDL_config_windows.h

include/SDL_config_windows.h

Log