kmx git

Commit	Date	Message
93ccdee8	2020-12-23T13:47:49	Fixed bug 5404 - stdlib: Added SDL_round, SDL_roundf, SDL_lround and SDL_lroundf Cameron Cawley stdlib: Added SDL_round, SDL_roundf, SDL_lround and SDL_lroundf The default implementation is based on the one used in the Windows RT video driver.
bee8db3b	2020-11-14T02:16:41	config: Make sure HAVE_TRUNC and HAVE_TRUNCF are defined as appropriate. The configure/cmake scripts were checking for these functions but we didn't have the SDL_config.h.* pieces in place. The other config headers are best guesses.
e6c640f3	2020-04-13T08:18:16	Enable the virtual joystick API by default
a8780c6a	2020-01-16T20:49:25	Updated copyright date for 2020
eb8f14bb	2019-11-20T20:40:50	added SDL_strtokr() as a replacement for POSIX strtok_r (bug #4046.)
ffc7d091	2019-10-01T14:00:02	endpointvolume.h checks not needed since changeset 13078:8ab094a9df6b .
5e13087b	2019-01-04T22:01:14	Updated copyright for 2019
b11c75e9	2018-09-28T13:41:04	configury, cmake: add check for endpointvolume.h : add HAVE_ENDPOINTVOLUME_H, HAVE_MMDEVICEAPI_H and HAVE_AUDIOCLIENT_H in SDL_config.h.in, SDL_config.h.cmake, SDL_config_windows.h, and in SDL_config_winrt.h.
3e5dbc69	2018-08-21T13:29:21	Added a dummy sensor driver
b4fe7412	2018-08-04T11:52:46	SDL_exp
11c348b4	2018-01-17T11:53:09	SDL_log10
e3cc5b2c	2018-01-03T10:03:25	Updated copyright for 2018
351d6d47	2017-12-06T12:24:32	audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI
bcdf8b91	2017-11-04T17:35:03	Added SDL_fmod() and SDL_fmodf()
f465f24d	2017-09-09T08:36:37	Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.
94754c39	2017-02-20T10:55:33	Updated config headers to override the base SDL_config.h if both are included
45b774e3	2017-01-01T18:33:28	Updated copyright for 2017
36156335	2016-11-20T21:34:54	Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain
42065e78	2016-01-02T10:10:34	Updated copyright to 2016
25abce51	2015-11-29T19:33:11	WinRT: added Win10/UWP (Universal Windows Platform) support "UWP" appears to be Microsoft's new name for WinRT/Windows-Store APIs. This set of changes updates SDL's WinRT backends to support the Win10 flavor of WinRT. It has been tested on Win10 on a desktop. In theory, it should also support Win10 on other devices (phone, Xbox One, etc.), however further patches may be necessary. This adds: - a set of MSVC 2015 project files, for use in creating UWP apps - modifications to various pieces of SDL, in order to compile via MSVC 2015 + the Win10 API set - enables SDL_Window resizing and programmatic-fullscreen toggling, when using the WinRT backend - WinRT README updates
fa2d5ab4	2015-11-26T13:51:03	WinRT: bug-fix - SDL_SetThreadPriority() didn't work on WinRT 8.x platforms WinRT 8.0 (Phone and non-Phone) didn't offer an API to set an already-created thread's priority. WinRT 8.1 offered this API, along with several other Win32 thread functions that were previously unavailable (in WinRT). This change makes WinRT 8.1+ platforms use SDL's Win32 backend.
623898f7	2015-11-26T00:41:39	WinRT: lots of display and windowing related fixes This change-set fixes a lot of windowing related bugs, especially with regards to Windows 8.x apps running on Windows 10 (which was the driver for this work). The primary fixes include: * listed display modes were wrong, especially when launching apps into a non-fullscreen space * reported window flags were often wrong, especially on Windows 10 * fullscreen/windowed mode switches weren't failing (they are not programmatically possible in Win 8.x apps).
0e45984f	2015-06-21T17:33:46	Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2c4a6ea0	2015-05-26T06:27:46	Updated the copyright year to 2015
b72938c8	2015-04-20T12:22:44	Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.
fe6c797c	2015-04-10T23:30:31	Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.
b88ca1b4	2015-02-10T16:28:56	the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
b48e54aa	2015-01-26T22:00:29	Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
3cfe0abe	2014-12-28T22:10:24	Fixed copyright date.
70438be2	2014-12-03T10:55:23	WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!
9c398852	2014-11-22T22:20:40	Corrected header file documentation comment.
bbe1df0d	2014-11-02T10:32:25	WinRT: enabled OpenGL ES 2 support on Windows Phone The "future-dev" branch of MSOpenTech's ANGLE/WinRT repository (at https://github.com/msopentech/angle) includes support for Windows Phone 8.1. This change allows it to be used in conjunction with SDL's OpenGL functions.
24c86b55	2014-09-11T19:24:42	[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam
1ea86978	2014-08-17T13:11:55	Removed SDL_round() because the license wasn't compatible with zlib
4e7db78e	2014-08-16T23:23:15	Added SDL_round(), contributed by Benoit Pierre - thanks!
cf4ff728	2014-07-04T18:20:23	Made the latest XInput + Haptic changes compile and run on WinRT Notes: - Support for the 'Guide' button does not seem to be possible, as XInputGetStateEx is not available on WinRT. - Haptic support appears to be working on WinRT now! - SDL/WinRT does not allow calls to LoadLibrary or LoadLibraryEx. The calls to those were removed by this change, but only when compiling for WinRT. Non-WinRT Windows will continue to detect and load XInput via LoadLibrary and GetProcAddress calls.
b79e7f32	2014-07-03T15:39:55	Split the XInput and DirectInput code so Windows RT can use the existing XInput support.
6101e4b2	2014-06-07T18:20:01	Added SDL_sqrtf(), SDL_tan(), SDL_tanf()
2a7aa9bd	2014-05-06T00:13:07	Fix build on Windows targets without dxgi.h, like MingW32.
3dcb451f	2014-04-09T21:29:19	Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.
b68b6e23	2014-03-12T11:57:15	Fixed various build and runtime errors when using WinRT with VS2012.
05c23063	2014-03-09T11:06:11	Fixed line endings on WinRT source code
d92f0127	2013-12-21T10:08:11	WinRT: enabled OpenGL ES 2 support by default A copy of ANGLE/WinRT is still needed to run OpenGL content, but is not needed to compile SDL/WinRT.
67925947	2013-11-29T00:21:56	WinRT: removed a now-complete TODO comment regarding Direct3D 11
b6f80d85	2013-11-29T00:19:46	WinRT: enable the OpenGL ES 2 SDL_Renderer backend, if and when OpenGL ES 2 support is compiled in
749117ac	2013-11-04T19:54:29	WinRT: added experimental OpenGL ES 2.0 support A port of the ANGLE library (OpenGL ES 2.0 for Direct3D) to WinRT, via https://github.com/stammen/angleproject, is used as a base. To enable, clone 'angleproject' into the directory one above where SDL/WinRT is, open the file SDL/include/SDL_config_winrt.h, and uncomment the #defines that begin with 'SDL_VIDEO_OPENGL'. From there, apps can create an OpenGL capable SDL_Window via the flag, SDL_WINDOW_OPENGL, and an OpenGL ES 2 context via SDL_GL_CreateContext. The Direct3D 11.1 renderer cannot be used alongside SDL_WINDOW_OPENGL. Only Windows 8/8.1 is supported for now. Shaders may need to be precompiled, in some (all?) cases.
f3bd9175	2013-09-04T19:55:45	WinRT: more renaming of "windowsrt" to "winrt"

93ccdee8

2020-12-23T13:47:49

Fixed bug 5404 - stdlib: Added SDL_round, SDL_roundf, SDL_lround and SDL_lroundf Cameron Cawley stdlib: Added SDL_round, SDL_roundf, SDL_lround and SDL_lroundf The default implementation is based on the one used in the Windows RT video driver.

bee8db3b

2020-11-14T02:16:41

config: Make sure HAVE_TRUNC and HAVE_TRUNCF are defined as appropriate. The configure/cmake scripts were checking for these functions but we didn't have the SDL_config.h.* pieces in place. The other config headers are best guesses.

e6c640f3

2020-04-13T08:18:16

Enable the virtual joystick API by default

a8780c6a

2020-01-16T20:49:25

Updated copyright date for 2020

eb8f14bb

2019-11-20T20:40:50

added SDL_strtokr() as a replacement for POSIX strtok_r (bug #4046.)

ffc7d091

2019-10-01T14:00:02

endpointvolume.h checks not needed since changeset 13078:8ab094a9df6b .

5e13087b

2019-01-04T22:01:14

Updated copyright for 2019

b11c75e9

2018-09-28T13:41:04

configury, cmake: add check for endpointvolume.h : add HAVE_ENDPOINTVOLUME_H, HAVE_MMDEVICEAPI_H and HAVE_AUDIOCLIENT_H in SDL_config.h.in, SDL_config.h.cmake, SDL_config_windows.h, and in SDL_config_winrt.h.

3e5dbc69

2018-08-21T13:29:21

Added a dummy sensor driver

b4fe7412

2018-08-04T11:52:46

SDL_exp

11c348b4

2018-01-17T11:53:09

SDL_log10

e3cc5b2c

2018-01-03T10:03:25

Updated copyright for 2018

351d6d47

2017-12-06T12:24:32

audio: Port WASAPI to WinRT, remove XAudio2 backend. XAudio2 doesn't have capture support, so WASAPI was to replace it; the holdout was WinRT, which still needed it as its primary audio target until the WASAPI code code be made to work. The support matrix now looks like: WinXP: directsound by default, winmm as a fallback for buggy drivers. Vista+: WASAPI (directsound and winmm as fallbacks for debugging). WinRT: WASAPI

bcdf8b91

2017-11-04T17:35:03

Added SDL_fmod() and SDL_fmodf()

f465f24d

2017-09-09T08:36:37

Fixed bug 3760 - RWops doesn't check for integer overflow when stdio_fseek only supports 32 bits Simon Hug When RWops seeks with fseek or fseeko it uses the types long or off_t which can be 32 bits on some platforms. stdio_seek does not check if the 64-bit integer for the offset fits into a 32-bit integer. Offsets equal or larger than 2 GiB will have implementation-defined behavior and failure states would be very confusing to debug. The attached patch adds range checking by using the macros from limits.h for long type and some bit shifting for off_t because POSIX couldn't be bothered to specify min and max macros. It also defines HAVE_FSEEKI64 in SDL_config_windows.h so that the Windows function gets picked up automatically with the default config. And there's an additional error message for when ftell fails.

94754c39

2017-02-20T10:55:33

Updated config headers to override the base SDL_config.h if both are included

45b774e3

2017-01-01T18:33:28

Updated copyright for 2017

36156335

2016-11-20T21:34:54

Renaming of guard header names to quiet -Wreserved-id-macro Patch contributed by Sylvain

42065e78

2016-01-02T10:10:34

Updated copyright to 2016

25abce51

2015-11-29T19:33:11

WinRT: added Win10/UWP (Universal Windows Platform) support "UWP" appears to be Microsoft's new name for WinRT/Windows-Store APIs. This set of changes updates SDL's WinRT backends to support the Win10 flavor of WinRT. It has been tested on Win10 on a desktop. In theory, it should also support Win10 on other devices (phone, Xbox One, etc.), however further patches may be necessary. This adds: - a set of MSVC 2015 project files, for use in creating UWP apps - modifications to various pieces of SDL, in order to compile via MSVC 2015 + the Win10 API set - enables SDL_Window resizing and programmatic-fullscreen toggling, when using the WinRT backend - WinRT README updates

fa2d5ab4

2015-11-26T13:51:03

WinRT: bug-fix - SDL_SetThreadPriority() didn't work on WinRT 8.x platforms WinRT 8.0 (Phone and non-Phone) didn't offer an API to set an already-created thread's priority. WinRT 8.1 offered this API, along with several other Win32 thread functions that were previously unavailable (in WinRT). This change makes WinRT 8.1+ platforms use SDL's Win32 backend.

623898f7

2015-11-26T00:41:39

WinRT: lots of display and windowing related fixes This change-set fixes a lot of windowing related bugs, especially with regards to Windows 8.x apps running on Windows 10 (which was the driver for this work). The primary fixes include: * listed display modes were wrong, especially when launching apps into a non-fullscreen space * reported window flags were often wrong, especially on Windows 10 * fullscreen/windowed mode switches weren't failing (they are not programmatically possible in Win 8.x apps).

0e45984f

2015-06-21T17:33:46

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().

2c4a6ea0

2015-05-26T06:27:46

Updated the copyright year to 2015

b72938c8

2015-04-20T12:22:44

Windows: Always set the system timer resolution to 1ms by default. An existing hint lets apps that don't need the timer resolution changed avoid this, to save battery, etc, but this fixes several problems in timing, audio callbacks not firing fast enough, etc. Fixes Bugzilla #2944.

fe6c797c

2015-04-10T23:30:31

Fixed an iOS view orientation issue when SDL_GL_CreateContext or SDL_CreateRenderer is called.

b88ca1b4

2015-02-10T16:28:56

the last parameter of XChangeProperty is the number of elements.. and when the element format is 32.. the element is "long" so we have 5 long elements here. Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture. More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802

b48e54aa

2015-01-26T22:00:29

Fixed bug 2802 - [patch] Fix android build compiling in wrong filesystem implementation Jonas Kulla The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c. I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.

3cfe0abe

2014-12-28T22:10:24

Fixed copyright date.

70438be2

2014-12-03T10:55:23

WinRT: fixed bug whereby SDL would override an app's default orientation WinRT apps can set a default, preferred orientation via a .appxmanifest file. SDL was overriding this on app startup, and making the app use all possible orientations (landscape and portrait). Thanks to Eric Wing for the heads up on this!

9c398852

2014-11-22T22:20:40

Corrected header file documentation comment.

bbe1df0d

2014-11-02T10:32:25

WinRT: enabled OpenGL ES 2 support on Windows Phone The "future-dev" branch of MSOpenTech's ANGLE/WinRT repository (at https://github.com/msopentech/angle) includes support for Windows Phone 8.1. This change allows it to be used in conjunction with SDL's OpenGL functions.

24c86b55

2014-09-11T19:24:42

[X11] Reconcile logical keyboard state with physical state on FocusIn since the window system doesn't do it for us like other platforms. This prevents sticky keys and missed keys when going in and out of focus, for example Alt would appear to stick if switching away from an SDL app with Alt-Tab and had to be pressed again. CR: Sam

1ea86978

2014-08-17T13:11:55

Removed SDL_round() because the license wasn't compatible with zlib

4e7db78e

2014-08-16T23:23:15

Added SDL_round(), contributed by Benoit Pierre - thanks!

cf4ff728

2014-07-04T18:20:23

Made the latest XInput + Haptic changes compile and run on WinRT Notes: - Support for the 'Guide' button does not seem to be possible, as XInputGetStateEx is not available on WinRT. - Haptic support appears to be working on WinRT now! - SDL/WinRT does not allow calls to LoadLibrary or LoadLibraryEx. The calls to those were removed by this change, but only when compiling for WinRT. Non-WinRT Windows will continue to detect and load XInput via LoadLibrary and GetProcAddress calls.

b79e7f32

2014-07-03T15:39:55

Split the XInput and DirectInput code so Windows RT can use the existing XInput support.

6101e4b2

2014-06-07T18:20:01

Added SDL_sqrtf(), SDL_tan(), SDL_tanf()

2a7aa9bd

2014-05-06T00:13:07

Fix build on Windows targets without dxgi.h, like MingW32.

3dcb451f

2014-04-09T21:29:19

Added a README file regarding WinRT support To note, this file is currently formatted with CRLF line endings, rather than LF, to allow the file to be viewed with Notepad.

b68b6e23

2014-03-12T11:57:15

Fixed various build and runtime errors when using WinRT with VS2012.

05c23063

2014-03-09T11:06:11

Fixed line endings on WinRT source code

d92f0127

2013-12-21T10:08:11

WinRT: enabled OpenGL ES 2 support by default A copy of ANGLE/WinRT is still needed to run OpenGL content, but is not needed to compile SDL/WinRT.

67925947

2013-11-29T00:21:56

WinRT: removed a now-complete TODO comment regarding Direct3D 11

b6f80d85

2013-11-29T00:19:46

WinRT: enable the OpenGL ES 2 SDL_Renderer backend, if and when OpenGL ES 2 support is compiled in

749117ac

2013-11-04T19:54:29

WinRT: added experimental OpenGL ES 2.0 support A port of the ANGLE library (OpenGL ES 2.0 for Direct3D) to WinRT, via https://github.com/stammen/angleproject, is used as a base. To enable, clone 'angleproject' into the directory one above where SDL/WinRT is, open the file SDL/include/SDL_config_winrt.h, and uncomment the #defines that begin with 'SDL_VIDEO_OPENGL'. From there, apps can create an OpenGL capable SDL_Window via the flag, SDL_WINDOW_OPENGL, and an OpenGL ES 2 context via SDL_GL_CreateContext. The Direct3D 11.1 renderer cannot be used alongside SDL_WINDOW_OPENGL. Only Windows 8/8.1 is supported for now. Shaders may need to be precompiled, in some (all?) cases.

f3bd9175

2013-09-04T19:55:45

WinRT: more renaming of "windowsrt" to "winrt"

kc3-lang/SDL/include/SDL_config_winrt.h

include/SDL_config_winrt.h

Log