kc3-lang/SDL/docs/README-winrt.md

Branch

Download

WinRT

This port allows SDL applications to run on Microsoft’s platforms that require use of “Windows Runtime”, aka. “WinRT”, APIs. Microsoft may, in some cases, refer to them as either “Windows Store”, or for Windows 10, “UWP” apps.

In the past, SDL has supported Windows RT 8.x, Windows Phone, etc, but in modern times this port is focused on UWP apps, which run on Windows 10, and modern Xbox consoles.

Requirements

Status

Here is a rough list of what works, and what doesn’t:

Upgrade Notes

SDL_GetPrefPath() usage when upgrading WinRT apps from SDL 2.0.3

SDL 2.0.4 fixes two bugs found in the WinRT version of SDL_GetPrefPath(). The fixes may affect older, SDL 2.0.3-based apps’ save data. Please note that these changes only apply to SDL-based WinRT apps, and not to apps for any other platform.

  1. SDL_GetPrefPath() would return an invalid path, one in which the path’s directory had not been created. Attempts to create files there (via fopen(), for example), would fail, unless that directory was explicitly created beforehand.

  2. SDL_GetPrefPath(), for non-WinPhone-based apps, would return a path inside a WinRT ‘Roaming’ folder, the contents of which get automatically synchronized across multiple devices. This process can occur while an application runs, and can cause existing save-data to be overwritten at unexpected times, with data from other devices. (Windows Phone apps written with SDL 2.0.3 did not utilize a Roaming folder, due to API restrictions in Windows Phone 8.0).

SDL_GetPrefPath(), starting with SDL 2.0.4, addresses these by:

  1. making sure that SDL_GetPrefPath() returns a directory in which data can be written to immediately, without first needing to create directories.

  2. basing SDL_GetPrefPath() off of a different, non-Roaming folder, the contents of which do not automatically get synchronized across devices (and which require less work to use safely, in terms of data integrity).

Apps that wish to get their Roaming folder’s path can do so either by using SDL_WinRTGetFSPathUTF8(), SDL_WinRTGetFSPathUNICODE() (which returns a UCS-2/wide-char string), or directly through the WinRT class, Windows.Storage.ApplicationData.

Setup, High-Level Steps

The steps for setting up a project for an SDL/WinRT app looks like the following, at a high-level:

  1. create a new Visual C++ project using Microsoft’s template for a, “Direct3D App”.
  2. remove most of the files from the project.
  3. make your app’s project directly reference SDL/WinRT’s own Visual C++ project file, via use of Visual C++’s “References” dialog. This will setup the linker, and will copy SDL’s .dll files to your app’s final output.
  4. adjust your app’s build settings, at minimum, telling it where to find SDL’s header files.
  5. add files that contains a WinRT-appropriate main function, along with some data to make sure mouse-cursor-hiding (via SDL_ShowCursor(SDL_DISABLE) calls) work properly.
  6. add SDL-specific app code.
  7. build and run your app.

Setup, Detailed Steps

1. Create a new project

Create a new project using one of Visual C++’s templates for a plain, non-XAML, “Direct3D App” (XAML support for SDL/WinRT is not yet ready for use). If you don’t see one of these templates, in Visual C++’s ‘New Project’ dialog, try using the textbox titled, ‘Search Installed Templates’ to look for one.

2. Remove unneeded files from the project

In the new project, delete any file that has one of the following extensions:

When you are done, you should be left with a few files, each of which will be a necessary part of your app’s project. These files will consist of:

3. Add references to SDL’s project files

SDL/WinRT can be built in multiple variations, spanning across three different CPU architectures (x86, x64, and ARM) and two different configurations (Debug and Release). WinRT and Visual C++ do not currently provide a means for combining multiple variations of one library into a single file. Furthermore, it does not provide an easy means for copying pre-built .dll files into your app’s final output (via Post-Build steps, for example). It does, however, provide a system whereby an app can reference the MSVC projects of libraries such that, when the app is built:

  1. each library gets built for the appropriate CPU architecture(s) and WinRT platform(s).
  2. each library’s output, such as .dll files, get copied to the app’s build output.

To set this up for SDL/WinRT, you’ll need to run through the following steps:

  1. open up the Solution Explorer inside Visual C++ (under the “View” menu, then “Solution Explorer”)
  2. right click on your app’s solution.
  3. navigate to “Add”, then to “Existing Project…”
  4. find SDL/WinRT’s Visual C++ project file and open it, in the VisualC-WinRT directory.
  5. once the project has been added, right-click on your app’s project and select, “References…”
  6. click on the button titled, “Add New Reference…”
  7. check the box next to SDL
  8. click OK to close the dialog
  9. SDL will now show up in the list of references. Click OK to close that dialog.

Your project is now linked to SDL’s project, insofar that when the app is built, SDL will be built as well, with its build output getting included with your app.

4. Adjust Your App’s Build Settings

Some build settings need to be changed in your app’s project. This guide will outline the following:

To change these settings:

  1. right-click on the project
  2. choose “Properties”
  3. in the drop-down box next to “Configuration”, choose, “All Configurations”
  4. in the drop-down box next to “Platform”, choose, “All Platforms”
  5. in the left-hand list, expand the “C/C++” section
  6. select “General”
  7. edit the “Additional Include Directories” setting, and add a path to SDL’s “include” directory
  8. Optional: to enable compilation of C code: change the setting for “Consume Windows Runtime Extension” from “Yes (/ZW)” to “No”. If you’re working with a completely C++ based project, this step can usually be omitted.
  9. Optional: to disable precompiled headers (which can produce ‘stdafx.h’-related build errors, if setup incorrectly: in the left-hand list, select “Precompiled Headers”, then change the setting for “Precompiled Header” from “Use (/Yu)” to “Not Using Precompiled Headers”.
  10. close the dialog, saving settings, by clicking the “OK” button

5. Add a WinRT-appropriate main function, and a blank-cursor image, to the app.

A few files should be included directly in your app’s MSVC project, specifically:

  1. a WinRT-appropriate main function (which is different than main() functions on other platforms)
  2. a Win32-style cursor resource, used by SDL_ShowCursor() to hide the mouse cursor (if and when the app needs to do so). If this cursor resource is not included, mouse-position reporting may fail if and when the cursor is hidden, due to possible bugs/design-oddities in Windows itself.

To include these files for C/C++ projects:

  1. right-click on your project (again, in Visual C++’s Solution Explorer), navigate to “Add”, then choose “Existing Item…”.
  2. navigate to the directory containing SDL’s source code, then into its subdirectory, ‘src/main/winrt/‘. Select, then add, the following files:
    • SDL_winrt_main_NonXAML.cpp
    • SDL2-WinRTResources.rc
    • SDL2-WinRTResource_BlankCursor.cur
  3. right-click on the file SDL_winrt_main_NonXAML.cpp (as listed in your project), then click on “Properties…”.
  4. in the drop-down box next to “Configuration”, choose, “All Configurations”
  5. in the drop-down box next to “Platform”, choose, “All Platforms”
  6. in the left-hand list, click on “C/C++”
  7. change the setting for “Consume Windows Runtime Extension” to “Yes (/ZW)”.
  8. click the OK button. This will close the dialog.

NOTE: C++/CX compilation is currently required in at least one file of your app’s project. This is to make sure that Visual C++’s linker builds a ‘Windows Metadata’ file (.winmd) for your app. Not doing so can lead to build errors.

For non-C++ projects, you will need to call SDL_WinRTRunApp from your language’s main function, and generate SDL2-WinRTResources.res manually by using rc via the Developer Command Prompt and including it as a <Win32Resource> within the first <PropertyGroup> block in your Visual Studio project file.

6. Add app code and assets

At this point, you can add in SDL-specific source code. Be sure to include a C-style main function (ie: int main(int argc, char *argv[])). From there you should be able to create a single SDL_Window (WinRT apps can only have one window, at present), as well as an SDL_Renderer. Direct3D will be used to draw content. Events are received via SDL’s usual event functions (SDL_PollEvent, etc.) If you have a set of existing source files and assets, you can start adding them to the project now. If not, or if you would like to make sure that you’re setup correctly, some short and simple sample code is provided below.

6.A. … when creating a new app

If you are creating a new app (rather than porting an existing SDL-based app), or if you would just like a simple app to test SDL/WinRT with before trying to get existing code working, some working SDL/WinRT code is provided below. To set this up:

  1. right click on your app’s project
  2. select Add, then New Item. An “Add New Item” dialog will show up.
  3. from the left-hand list, choose “Visual C++”
  4. from the middle/main list, choose “C++ File (.cpp)”
  5. near the bottom of the dialog, next to “Name:”, type in a name for your source file, such as, “main.cpp”.
  6. click on the Add button. This will close the dialog, add the new file to your project, and open the file in Visual C++’s text editor.
  7. Copy and paste the following code into the new file, then save it. 
#include <SDL.h>

int main(int argc, char **argv)
{
    SDL_DisplayMode mode;
    SDL_Window * window = NULL;
    SDL_Renderer * renderer = NULL;
    SDL_Event evt;
    SDL_bool keep_going = SDL_TRUE;

    if (SDL_Init(SDL_INIT_VIDEO) != 0) {
        return 1;
    } else if (SDL_GetCurrentDisplayMode(0, &mode) != 0) {
        return 1;
    } else if (SDL_CreateWindowAndRenderer(mode.w, mode.h, SDL_WINDOW_FULLSCREEN, &window, &renderer) != 0) {
        return 1;
    }

    while (keep_going) {
        while (SDL_PollEvent(&evt)) {
            if ((evt.type == SDL_KEYDOWN) && (evt.key.keysym.sym == SDLK_ESCAPE)) {
                keep_going = SDL_FALSE;
            }
        }

        SDL_SetRenderDrawColor(renderer, 0, 255, 0, 255);
        SDL_RenderClear(renderer);
        SDL_RenderPresent(renderer);
    }

    SDL_Quit();
    return 0;
}

6.B. Adding code and assets

If you have existing code and assets that you’d like to add, you should be able to add them now. The process for adding a set of files is as such.

  1. right click on the app’s project
  2. select Add, then click on “New Item…”
  3. open any source, header, or asset files as appropriate. Support for C and C++ is available.

Do note that WinRT only supports a subset of the APIs that are available to Win32-based apps. Many portions of the Win32 API and the C runtime are not available.

A list of unsupported C APIs can be found at http://msdn.microsoft.com/en-us/library/windows/apps/jj606124.aspx

General information on using the C runtime in WinRT can be found at https://msdn.microsoft.com/en-us/library/hh972425.aspx

A list of supported Win32 APIs for WinRT apps can be found at http://msdn.microsoft.com/en-us/library/windows/apps/br205757.aspx. To note, the list of supported Win32 APIs for Windows Phone 8.0 is different. That list can be found at http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj662956(v=vs.105).aspx

7. Build and run your app

Your app project should now be setup, and you should be ready to build your app. To run it on the local machine, open the Debug menu and choose “Start Debugging”. This will build your app, then run your app full-screen. To switch out of your app, press the Windows key. Alternatively, you can choose to run your app in a window. To do this, before building and running your app, find the drop-down menu in Visual C++’s toolbar that says, “Local Machine”. Expand this by clicking on the arrow on the right side of the list, then click on Simulator. Once you do that, any time you build and run the app, the app will launch in window, rather than full-screen.

7.A. Running apps on older, ARM-based, “Windows RT” devices

These instructions do not include Windows Phone, despite Windows Phone typically running on ARM processors. They are specifically for devices that use the “Windows RT” operating system, which was a modified version of Windows 8.x that ran primarily on ARM-based tablet computers.

To build and run the app on ARM-based, “Windows RT” devices, you’ll need to:

Microsoft’s Remote Debugger can be found at https://msdn.microsoft.com/en-us/library/hh441469.aspx. Please note that separate versions of this debugger exist for different versions of Visual C++, one each for MSVC 2015, 2013, and 2012.

To setup Visual C++ to launch your app on an ARM device:

  1. make sure the Remote Debugger is running on your ARM device, and that it’s on the same IP network as your development machine.
  2. from Visual C++’s toolbar, find a drop-down menu that says, “Win32”. Click it, then change the value to “ARM”.
  3. make sure Visual C++ knows the hostname or IP address of the ARM device. To do this:
    1. open the app project’s properties
    2. select “Debugging”
    3. next to “Machine Name”, enter the hostname or IP address of the ARM device
    4. if, and only if, you’ve turned off authentication in the Remote Debugger, then change the setting for “Require Authentication” to No
    5. click “OK”
  4. build and run the app (from Visual C++). The first time you do this, a prompt will show up on the ARM device, asking for a Microsoft Account. You do, unfortunately, need to log in here, and will need to follow the subsequent registration steps in order to launch the app. After you do so, if the app didn’t already launch, try relaunching it again from within Visual C++.

Troubleshooting

Build fails with message, “error LNK2038: mismatch detected for ‘vccorlib_lib_should_be_specified_before_msvcrt_lib_to_linker’”

Try adding the following to your linker flags. In MSVC, this can be done by right-clicking on the app project, navigating to Configuration Properties -> Linker -> Command Line, then adding them to the Additional Options section.

Mouse-motion events fail to get sent, or SDL_GetMouseState() fails to return updated values

This may be caused by a bug in Windows itself, whereby hiding the mouse cursor can cause mouse-position reporting to fail.

SDL provides a workaround for this, but it requires that an app links to a set of Win32-style cursor image-resource files. A copy of suitable resource files can be found in src/main/winrt/. Adding them to an app’s Visual C++ project file should be sufficient to get the app to use them.

SDL’s Visual Studio project file fails to open, with message, “The system can’t find the file specified.”

This can be caused for any one of a few reasons, which Visual Studio can report, but won’t always do so in an up-front manner.

To help determine why this error comes up:

  1. open a copy of Visual Studio without opening a project file. This can be accomplished via Windows’ Start Menu, among other means.
  2. show Visual Studio’s Output window. This can be done by going to VS’ menu bar, then to View, and then to Output.
  3. try opening the SDL project file directly by going to VS’ menu bar, then to File, then to Open, then to Project/Solution. When a File-Open dialog appears, open the SDL project (such as the one in SDL’s source code, in its directory, VisualC-WinRT/UWP_VS2015/).
  4. after attempting to open SDL’s Visual Studio project file, additional error information will be output to the Output window.

If Visual Studio reports (via its Output window) that the project:

“could not be loaded because it’s missing install components. To fix this launch Visual Studio setup with the following selections: Microsoft.VisualStudio.ComponentGroup.UWP.VC”

… then you will need to re-launch Visual Studio’s installer, and make sure that the workflow for “Universal Windows Platform development” is checked, and that its optional component, “C++ Universal Windows Platform tools” is also checked. While you are there, if you are planning on targeting UWP / Windows 10, also make sure that you check the optional component, “Windows 10 SDK (10.0.10240.0)”. After making sure these items are checked as-appropriate, install them.

Once you install these components, try re-launching Visual Studio, and re-opening the SDL project file. If you still get the error dialog, try using the Output window, again, seeing what Visual Studio says about it.

Game controllers / joysticks aren’t working!

Windows only permits certain game controllers and joysticks to work within WinRT / UWP apps. Even if a game controller or joystick works in a Win32 app, that device is not guaranteed to work inside a WinRT / UWP app.

According to Microsoft, “Xbox compatible controllers” should work inside UWP apps, potentially with more working in the future. This includes, but may not be limited to, Microsoft-made Xbox controllers and USB adapters. (Source: https://social.msdn.microsoft.com/Forums/en-US/9064838b-e8c3-4c18-8a83-19bf0dfe150d/xinput-fails-to-detect-game-controllers?forum=wpdevelop)

Source

Download

kmx.io     mail     discord kmxgit v0.4.0