Edit
kc3-lang/automake/ChangeLog
Branch :
-
Show log
Commit
-
Author :
Alexandre Duret-Lutz
Date : 2004-07-25 21:34:41
Hash : 55846d15
Message : * m4/mkdirp.m4 (AM_PROG_MKDIR_P): Remove `.' from the mkdir_p definition, it causes `make install' to fails for user with no right to write in the source-tree. * automake.in (handle_configure): Do not use mkdir_p in the definition for $(mkdir_p). Report from Harlan Stenn.
- ChangeLog
-
2004-07-25 Alexandre Duret-Lutz <adl@gnu.org> * m4/mkdirp.m4 (AM_PROG_MKDIR_P): Remove `.' from the mkdir_p definition, it causes `make install' to fails for user with no right to write in the source-tree. * automake.in (handle_configure): Do not use mkdir_p in the definition for $(mkdir_p). Report from Harlan Stenn. * lib/am/texi-vers.am (%STAMPVTI%): Typo in comment. 2004-07-22 Alexandre Duret-Lutz <adl@gnu.org> * doc/automake.texi (Libtool Modules): Typo in example. Report from Ulrich Eckhardt. 2004-07-21 Andreas Schwab <schwab@suse.de> (tiny change) * automake.in (check_directory): Quote $dir in regexp. 2004-07-17 Alexandre Duret-Lutz <adl@gnu.org> * configure.ac, NEWS: Bump version to 1.8e. * configure.ac, NEWS: Bump version to 1.8d. * lib/config-ml.in, lib/config.sub, lib/config.guess, lib/texinfo.tex: New upstream versions. * lib/am/texibuild.am (?GENERIC?%SOURCE_SUFFIX%.html, ?!GENERIC?%DEST_PREFIX%.html): Use $(X), not ${X}. * tests/installdir.test: installdirs-local should appear three times, since the change from 2004-07-11 will make it PHONY. * lib/am/distdir.am (distdir): Always use $(DIST_SUBDIRS) now that it is always defined. This is less confusing for users reading the generated Makefiles. * automake.in (handle_dist): Do not substitute DIST_SUBDIR_NAME. * lib/am/texibuild.am (?GENERIC?%SOURCE_SUFFIX%.html, ?!GENERIC?%DEST_PREFIX%.html): Output .htp, and then rename to .html on success. In case the target is a directory, this ensures its time stamp is updated and the no files are left over inside. * tests/txinfo21.test: Augment to test missing timestamp update reported by Akim Demaille. * doc/automake.texi (Top level): Rename as ... (Directories): ... this, and split into ... (Subdirectories, Conditional Subdirectories): ... these. (Subdirectories): Illustrate the use of `.'. (Conditional Subdirectories): Describe SUBDIRS and DIST_SUBDIRS before the example. Append a discussion about non-configured conditional directories. (Alternative): Move as a child of Directories. (Subpackages): New section. (Dist): Adjust links to Subdirectories, a Subpackages. (Third-Party Makefiles): Link to Conditional Subdirectories. 2004-07-14 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (target_hook): Accept %transform as last argument. (handle_single_transform): Pass %transform to target_hook. (handle_source_transform): Define DIST_SOURCE to tell whether a the source of a file is distributed or not. (lang_yacc_target_hook): Check DIST_SOURCE, and do not distribute the generated header if the .y source is not distributed. * tests/pr204.test: Use AM_YFLAGS = -d and make sure generated headers are not distributed. 2004-07-12 Simon Josefsson <jas@extundo.com> (tiny change) * doc/automake.texi (Options): Improve ustar file name length discussion. Reference tar manual. 2004-07-12 Ray Simard <rhs.techlists@sylvan-glade.com> (tiny change) * lib/Automake/Variable.pm (define): Fix precondition check. 2004-07-11 Alexandre Duret-Lutz <adl@gnu.org> For PR automake/428: Support for conditionally defined -hook and -local rules. * automake.in (user_phony_rule): New function. (handle_dist, handle_install, handle_all, do_check_merge_target, handle_factored_dependencies): Use user_phony_rule before adding a user -hook or -local rule as a dependency to ensure it is always defined an phony. * tests/cond37.test, tests/condhook.test: New files. * tests/Makefile.am (TESTS): Add them. Report from Simon Josefsson and Nik A. Melchior. 2004-07-05 Paul Eggert <eggert@cs.ucla.edu> * doc/automake.texi (Install): Warn that you should create /tmp/staging before installing into it, to avoid security problems. * lib/install-sh: Remove support for -b= and -t= options; this has been moribund for a decade. Add support for -t and -T options (new in coreutils install). -c option now does nothing (the default is to copy), for compatibility with BSD and coreutils 'install'. Fix usage message; it referred to nonexistent variables. Don't assume 'lasterr' is unset in environment. * tests/instsh2.test: Don't assume that install-sh without -c moves (it now copies). Add tests for new -t and -T options. 2004-06-16 Alexandre Duret-Lutz <adl@gnu.org> For Debian Bug#254372: * doc/automake.texi (Invoking aclocal): Rewrite the paragraph explaining m4_include is used for relative files. 2004-06-10 Alexandre Duret-Lutz <adl@gnu.org> For Debian Bug #251820: * aclocal.in (scan_file): Keep track of the location where each file is included, and display it when reporting a missing file. Pass this location to scan_file as a second argument. (scan_m4_files): Adjust calls to scan_file. * tests/acloca14.test: Add a test for this diagnostic. 2004-06-07 Alexandre Duret-Lutz <adl@gnu.org> * m4/tar.m4 (_AM_PROG_TAR): Split the definition of $_am_tools so it works with Solaris and Tru64 /bin/sh. Report from Nicolas Joly. 2004-06-06 Alexandre Duret-Lutz <adl@gnu.org> * m4/tar.m4 (_AM_PROG_TAR): Introduce $_am_tools to work around a bug in NetBSD /bin/sh. Report from Nicolas Joly. 2004-06-03 Alexandre Duret-Lutz <adl@gnu.org> * tests/defs.in (required=icc): Use `-V -help' instead of `-V -dryrun'. icc 8.0 fails on the latter. * tests/depcomp5.test: Require depmode=icc for icc 7.x, and depmod=gcc otherwise. Report from Ralf Wildenhues. * lib/am/clean.am (distclean-generic): Do no `rm -f $(CONFIG_CLEAN_FILES)' if `$(CONFIG_CLEAN_FILES)' is empty. Report from Nicolas Joly. 2004-05-31 Alexandre Duret-Lutz <adl@gnu.org> * NEWS: Make clearer that we do not output partial Makefile.ins on error. Suggested by Akim Demaille. * lib/depcomp (tru64) [libtool]: Use $dir$base.o.d instead of $dir.libs/$base.o.d. Libtool 1.5 causes both to be output, and we will clean the second automatically during distclean. Using the latter and leaving the former as we did before cause "files left in build directory" failures during distcheck. Suggested by Nicolas Joly. * doc/automake.texi (Built sources example): Explain what nodist_foo_SOURCES is (not) useful to, and use it in all the examples. (Tags): Mention nodist_noinst_HEADERS and nodist_prog_SOURCES. Suggested by Akim Demaille. 2004-05-23 Alexandre Duret-Lutz <adl@gnu.org> * configure.ac, NEWS: Bump version to 1.8c. * configure.ac, NEWS: Bump version to 1.8b. * m4/tar.m4 (_AM_PROG_TAR) <cpio>: Specify -o and -i option first, by POSIX; and use option -d in am_untar. * tests/defs.in (PATH): Export it. * lib/am/multilib.am: Add $(MAKE) comments to multido and multiclean lines, to enable parallel make. Based on a patch by Alexandre Oliva applied to newlib on 2003-10-15. 2004-05-22 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (scan_autoconf_traces): Trace for LT_SUPPORTED_TAG instead of AC_LIBTOOL_TAGS, since that how CVS Libtool has been changed. * tests/libtool3.test: Do not grep for --tag=CC, since CVS Libtool (unlike Libtool 1.5) does not has any CC tag. * tests/tar2.test: Skip the test if no pax archiver were found. * NEWS: Sync with branch-1-8, and reorganize current entry. * automake.in (handle_libraries): Make the diagnostic about non standard libraries a warning in foreign packages. This is already the case in handle_ltlibraries. (handle_libraries, handle_ltlibraries): Suggest a standard library name in the diagnostic, to help newcomers. * tests/stdlib.test, tests/stdlib2.test: Check for these suggestions. Check directory names for unportable names. Shaking the code to check this also led to the removal of the no-"/"-in-SUBDIRS restriction, and a fix to _do_recursive_traversal. * automake.in (check_directory): New function extracted from handle_subdirs, and augmented to check for reserved W32/DOS name. (check_directories_in_var): New function. (handle_subdirs): Call check_directories_in_var. Doing so also suppress the restriction that SUBDIRS should not contain slashes. (scan_autoconf_traces) <AC_CONFIG_AUX_DIR>: Call check_directory to ensure the argument exists and is safe. * doc/automake.texi (Top level): Do not say that src/subdir cannot be put in SUBDIRS. (Dist): Mention that distdir and top_distdir can be absolute. * lib/Automake/Variable.pm (_do_recursive_traversal) Support undefined $fun_collect, and fix two bugs introduced with skip_ac_subst on 2004-03-07. * lib/am/distdir.am (distdir): Use absolute distdir and top_distdir when recursing, because we can no longer prepend only `..' in case of SUBDIRS with `/'. * tests/auxdir4.test, tests/subdir9.test: New files. * tests/Makefile.am (TESTS): Add auxdir4.test. * tests/cond2.test, tests/subdir7.test: Augment to check location in diagnostics. 2004-05-21 Eric Blake <ebb9@byu.net> (tiny changes) * tests/txinfo22.test (AC_CONFIG_AUX_DIR): Use aux1, not aux, for cygwin compatibility. * tests/yacc6.test (AC_CONFIG_AUX_DIR): Likewise. * tests/conflnk3.test: Isolate checking for working `test -e' into a subshell, to skip this test on broken /bin/sh of solaris. 2004-05-17 Alexandre Duret-Lutz <adl@gnu.org> * m4/cond.m4 (AM_CONDITIONAL): Double-quote diagnostic. * tests/condd.test: Define a macro with the same name as a conditional. * tests/pr220.test: Modernize, and make sure the diagnostics contains the macro name. Report from Volker Boerchers. 2004-05-16 Alexandre Duret-Lutz <adl@gnu.org> * lib/texinfo.tex: New upstream version. 2004-05-15 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (handle_dist): Always define DIST_SUBDIRS, even when the no-dist or cygnus options are used. * tests/clean2.test: New file. * tests/Makefile.am (TESTS): Add clean2.test. Report from Daniel Jacobowitz. * aclocal.in (add_macro): Do not error out on undefined required macros. We are not sure they are really used, and Autoconf already diagnoses them. (scan_configure_dep): Diagnose missing AM_ macros as warnings rather than errors. * tests/aclocal3.test, tests/ammissing.test: Adjust to expect a warning instead of an error. * tests/aclocal8.test: AC_REQUIRE an undefined macro in an unused macro, and ensure aclocal works anyway. * tests/acloca17.test: New file. * tests/error.test: Delete, superseded by tests/acloca17.test. * tests/Makefile.am (TESTS): Add acloca17.test and remove error.test. Report from Jim Meyering. * lib/am/texibuild.am (?!GENERIC_INFO?%DEST_INFO_PREFIX%%DEST_SUFFIX%): Fold a few lines to reduce the output by 5 lines. Suggested by Karl Berry. * automake.in (parse_arguments, MAIN): Give more precise diagnostics when no input file is found. * tests/output5.test: Adjust. Suggested by Jens Petersen. 2004-05-14 Alexandre Duret-Lutz <adl@gnu.org> * lib/am/libs.am (AR, ARFLAGS): Move these definition ... * automake.in (handle_libraries): ... here, so that they are output even for EXTRA_LIBRARIES. * tests/ar2.test: New file. * tests/Makefile.am (TESTS): Add it. Report from Kevin Ryde. 2004-05-13 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (generate_makefile): Do not output Makefile.in on errors. * tests/werror2.test: New file. * tests/Makefile.am (TESTS): Add werror2.test. * tests/substtarg.test, tests/cond36.test, tests/backsl4.test: Adjust to run automake with -Wno-error when the output is expected in spite of the error. Report from Harlan Stenn. * doc/automake.texi (Program and Library Variables): Remove doubled word in footnote. * automake.in (handle_source_transform): Also check for a $(srcdir)/old_source rule when computing the default source name. Propagate this $(srcdir) prefix in Automake variables. * tests/ltlibsrc.test (noinst_LTLIBRARIES): Explicitly refer to $(srcdir)/zoo_d_old2_la.c. This fixes another failure with BSD Make. 2004-05-13 Paul Eggert <eggert@cs.ucla.edu> * Makefile.am (fetch): Work even with FreeBSD "make", which uses sh -e and thus errors-out if a simple-command fails. * lib/am/check.am (check-TESTS): Likewise. * lib/am/ltlib.am (clean-%DIR%LTLIBRARIES): Likewise. * lib/am/tags.am (TAGS): Likewise. 2004-05-13 Alexandre Duret-Lutz <adl@gnu.org> * tests/lex3.test, tests/yacc6.test: Require GNU Make. Fixing these for BSD Make requires invasive changes (lexers and parsers must be built into $srcdir, and--most annoyingly--all references to parse.h must be changed to $(srcdir)/parse.h). Report from Mark D. Baushke. 2004-05-10 Alexandre Duret-Lutz <adl@gnu.org> * tests/defs.in (GNUmake): Grep for GNU to parry FreeBSD make. Report from Mark D. Baushke. 2004-04-25 Alexandre Duret-Lutz <adl@gnu.org> * lib/texinfo.tex: New upstream version. * lib/depcomp (tru64): Clarify comments. Thanks to Nicolas Joly. * doc/automake.texi (Headers): Revamp. 2004-04-24 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (check_typos): Clarify the diagnostic. * tests/warnopts.test: Adjust. * lib/Automake/VarDef.pm (append): Turn VAR_ASIS variables into VAR_PRETTY variables to work around make implementation with limited line length, such as OSF1/Tru64 make. * tests/longline.test: New file. * tests/Makefile.am (TESTS): Add it. * tests/pluseq3.test, tests/pluseq8.test: Adjust. Report from Simon Josefsson. * lib/am/tags.am (TAGS): Pass `.' to Exuberant Ctags if --etags-include is used but no other files are supplied, so it creates the TAGS file anyway. Report from Akim Demaille. * lib/depcomp (tru64) [libtool]: Nicolas Joly reported on 2002-06-12 that dependencies were output in $dir.libs/$base.lo.d. Teun Burgers reported on 2004-03-30 they were in $dir.libs/$base.o.d. Try both. 2004-04-23 Alexandre Duret-Lutz <adl@gnu.org> For PR automake/414: Introduce option filename-length-max=99. * doc/automake.texi (Options): Document it. * configure.ac (AM_INIT_AUTOMAKE): Use it. * lib/Automake/Options.pm (_process_option_list): Recognize it. * automake.in (handle_dist): Set FILENAME_FILTER. * lib/am/distdir.am (distdir) [FILENAME_FILTER]: Diagnose long filenames. * tests/fn99.test: New file. * tests/Makefile.am (TESTS): Add fn99.test. 2004-04-20 Alexandre Duret-Lutz <adl@gnu.org> For PR automake/414: Introduce options tar-v7, tar-ustar, and tar-pax to select tar format. * doc/automake.texi (Options): Document them. * lib/Automake/Options.pm (_process_option_list): Process these new options. * lib/am/distdir.am (dist-gzip, dist-bzip2, dist-tarZ, dist, distcheck): Adjust to use am__tar and am__untar. * m4/tar.m4: New file. * m4/Makefile.am (dist_m4data_DATA): Add tar.m4. * m4/init.m4 (AM_INIT_AUTOMAKE): Support the new options and call _AM_PROG_TAR. * tests/tar.test, tests/tar2.test, tests/tar3.test: New files. * tests/Makefile.am (TESTS): Add them. 2004-04-18 Alexandre Duret-Lutz <adl@gnu.org> * lib/am/distdir.am (distcheck): Typo in shar decompression. * lib/config.guess, lib/config.sub, lib/texinfo.tex: New upstream versions. 2004-04-17 Alexandre Duret-Lutz <adl@gnu.org> Fix PR automake/49: * automake.in (scan_autoconf_traces) <AC_CONFIG_AUX_DIR>: Diagnose calls to AC_CONFIG_AUX_DIR followings calls to AM_INIT_AUTOMAKE. * tests/auxdir.test, tests/auxdir2.test, tests/lex5.test, tests/mdate3.test, tests/multlib.test, tests/reqd2.test, tests/symlink.test, tests/txinfo8.test, tests/txinfo22.test, tests/yacc6.test, tests/yacc8.test: Fix to call AC_CONFIG_AUX_DIR before AM_INIT_AUTOMAKE. * tests/auxdir3.test: New file (exercise this diagnostic). * tests/Makefile.am (TESTS): Add auxdir3.test. 2004-04-15 Alexandre Duret-Lutz <adl@gnu.org> * aclocal.in (%map_traced_defs): New variable. (scan_m4_files): Normalize filenames. (trace_used_macros): Trace for AC_DEFUN and AU_DEFUN, also ask for the filename and the first argument. Populate %map_traced_defs. (write_aclocal): Use $map_traced_defs to filter out unused definitions. * tests/acloca15.test: New file. * tests/Makefile.am (TESTS): Add acloca15.test. 2004-04-12 Alexandre Duret-Lutz <adl@gnu.org> * automake.in ($automake_needs_to_reprocess_all_files): Remove. ($automake_will_process_aux_dir): New variable. (scan_autoconf_traces): Reorder @input_files so that the Makefile that distributes aux files is processed last. This way we do not have to process all files twice using $automake_will_process_aux_dir. (require_file_internal): Suggest a full run of automake when appropriate. (MAIN): Remove the loop on $automake_needs_to_reprocess_all_files. * tests/distcom7.test: New file. * tests/reqd2.test: Do not check for the "running more than two" message. * tests/Makefile.am (TESTS): Add distcom7.test. * automake.in (@config_aux_path, $config_aux_dir): Rename as ... ($config_aux_dir, $am_config_aux_dir): ... these. ($config_aux_dir_set_in_configure_in): Rename as ... ($config_aux_dir_set_in_configure_ac): ... this. (%require_file_found): Rename as ... (%required_file_not_found): ... this. (handle_languages, handle_texinfo_helper, handle_dist, handle_configure, handle_emacs_lisp, handle_python, scan_autoconf_traces, yacc_lex_finish_helper): Adjust to new names. (scan_autoconf_traces): Call locate_aux_dir. (locate_aux_dir): New function. (@require_file_paths): Remove, not used anymore. (require_file_internal): Look files in only one directory (instead of @require_file_internal) passed in argument. (require_file, require_conf_file): Pass the destination directory to require_file_internal. Fix for PR automake/416: * m4/depend.m4 (_AM_DEPENDENCIES): Catch `not supported' ICC 8.0 remarks. From Peter Seiderer. 2004-04-10 Andreas Buening <andreas.buening@nexgo.de> * aclocal.in, automake.in, configure.ac, Makefile.am, tests/aclocal.in, tests/automake.in, tests/defs.in: Use PATH_SEPARATOR from autoconf instead of ':'. 2004-04-09 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (handle_lib_objects): Pass the condition of the variable definition to handle_LIBOBJS and handle_ALLOCA, not the aggregated conditions. * tests/Makefile.am (TESTS): Add libobj14.test. * tests/libobj14.test: New file. Report from Bill Davidson. 2004-04-02 Mike Nolta <mike@nolta.net> Better support for Fortran 9x. * automake.in: Add "fc" and "ppfc" languages for Fortran 9x. * doc/automake.texi (Fortran 9x Support): New section. * lib/Automake/Variable.pm (%_ac_macro_for_var): Add AC_PROG_FC. * tests/compile_f90_c_cxx.test: New file. * tests/ext.test: Add AC_PROG_FC. * tests/f90only.test: New file. * tests/link_f90_only.test: New file. * tests/Makefile.am (TESTS): Add new tests. 2004-04-01 Paul Eggert <eggert@twinsun.com> * lib/install-sh: If "mv -f" works, use it, and fall back to the old "test -f" + "rm -f" + "mv" method only if "mv -f" does not work. This improves performance in the usual case where "mv -f" works. It also lets us install the "mv" command without worrying about a small window where "mv" does not exist (this problem was reported by Raul Nunez de Arenas Coronado). 2004-03-26 Alexandre Duret-Lutz <adl@gnu.org> * m4/python.m4 (AM_PATH_PYTHON): Make sure am_display_PYTHON is set when $PYTHON has been set by the user. From Esben Haabendal Soerensen. 2004-03-22 Alexandre Duret-Lutz <adl@gnu.org> * doc/automake.texi (Default _SOURCES): Typo. (true): Correct _'s placement in example. Report from Stepan Kasal. 2004-03-19 Alexandre Duret-Lutz <adl@gnu.org> Overriding JAVAROOT is legitimate, do not warn about it. * lib/Automake/Variable.pm (%_silent_variable_override): Add JAVAROOT. * tests/java2.test: Run automake without -Wno-override. Report from Simon Josefsson. 2004-03-14 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (handle_texinfo_helper): Typos in comment. 2004-03-07 Alexandre Duret-Lutz <adl@gnu.org> * lib/config.guess: New upstream version. Fix for PR automake/285: * automake.in (handle_ltlibraries): Keep track of installation directories for each condition, then define a $(am_TARGET_rpath) variable to hold the -rpath flags of Libtool libraries conditionally installed in different directories. * lib/Automake/DisjConditions.pm (merge): New function. * tests/libtool6.test: Adjust. * tests/libtool8.test: New file. * tests/Makefile.am (TEST): Add libtool8.test. * lib/Automake/Variable.pm (traverse_recursively, _do_recursive_traversal): Honor the skip_ac_subst option. * automake.in (handle_dist): Use skip_ac_subst. 2004-02-29 Alexandre Duret-Lutz <adl@gnu.org> * Makefile.am (cvs-release): Upload to ~ftp/pub/automake, not ~ftp/automake. * lib/gnupload (Example): Update example. * lib/config-ml.in, lib/config.guess, lib/config.sub, lib/texinfo.tex: New upstream versions. * m4/depend.m4 (_AM_DEPENDENCIES): Use `touch' rather than `: >' to create numbered dependencies. This fixes a portability issue when CONFIG_SHELL is forced to /bin/sh on Solaris 8. Reported by Mark Phillips. * automake.in (lang_yacc_target_hook): Use Automake::Rule::define so that rules for the same headers are not output twice. * lib/Automake/Variable.pm (value_as_list_recursive): Do not call `return' inside `map'. * tests/cond30.test: Make sure `a.c' and `b.c' both appear in the Makefile.in. * tests/cond35.test, tests/cond36.test: New files. * tests/Makefile.am (TESTS): Add cond35.test and cond36.test. Report from Roman Fietze. Fix for PR/413: * lib/am/distdir.am (distcheck): Create $dc_destdir with `umask 077 && mkdir' instead of `$(mkdir_p)'. This prevents possible symlink attacks reported by Stefan Nordhausen. 2004-02-16 Alexandre Duret-Lutz <adl@gnu.org> * doc/automake.texi (Multiple Outputs): More text, based on comments from Eric Siegerman, Tim Van Holder, and Oren Ben-Kiki. 2004-02-15 Alexandre Duret-Lutz <adl@gnu.org> * m4/mkdirp.m4: Use `mkdir -p' only with GNU mkdir, because Solaris 8's mkdir is not thread-safe. * lib/mkinstalldirs: Likewise. * lib/install-sh: Abort when mkdir fails to create a directory. Report from Nathanael Nerode. 2004-02-07 Alexandre Duret-Lutz <adl@gnu.org> * aclocal.in (rel2abs): New function. (scan_configure_dep): Use rel2abs instead of File::Spec->rel2abs, the later does was introduced in Perl 5.6 so using it breaks with Perl 5.005. Report from Werner John. 2004-02-03 Alexandre Duret-Lutz <adl@gnu.org> * doc/automake.texi (Future of aclocal): Make clearer that it's ok to install macros into /usr/share/aclocal/. 2004-02-01 Alexandre Duret-Lutz <adl@gnu.org> * tests/lisp.test: Delete (pointless). * tests/Makefile.am (TESTS): Remove lisp.test. * lib/Automake/Variable.pm (transform_variable_recursively): Define rewritten variables in all conditions not *covered* by user definitions, not simply in conditions without a previous definition. * tests/cond34.test: New file. * tests/Makefile.am (TESTS): Add cond34.test. Report from Elena A. Vengerova * doc/automake.texi (Multiple Outputs): Typo. * doc/automake.texi (Emacs Lisp): Typos. Support for conditional _LISP. * automake.in (handle_emacs_lisp): Define $(ELCFILES) from LISP, not from $(am__ELCFILES). * lib/am/lisp.am (elc-stamp): Use $(LISP) instead of $(am__ELFILES). * tests/lisp6.test: New file. * tests/Makefile.am (TESTS): Add it. * automake.in (handle_emacs_lisp): Define $(ELCFILES) as $(am__ELCFILES), and always push it on @all. Do not mention elc-stamp. * lib/am/lisp.am (.el.elc): Rewrite as ... ($(am__ELCFILES)): ... this, and depend on elc-stamp. (elc-stamp): Make sure elc-stamp is older that all .elc files, as explained in the manual entry below. * doc/automake.texi (Multiple Outputs): New node. 2004-01-31 Alexandre Duret-Lutz <adl@gnu.org> * m4/regex.m4: Do not AC_SUBST(LIBOBJS), and quote most arguments. * tests/regex.test: New file. * tests/Makefile.am (TESTS): Add regex.test. 2004-01-28 Alexandre Duret-Lutz <adl@gnu.org> * Makefile.am (maintainer-check): Check for unquoted $(DESTDIR) uses. * lib/am/data.am, lib/am/distdir.am, lib/am/java.am, lib/am/libs.am, lib/am/lisp.am, lib/am/ltlib.am, lib/am/mans.am, lib/am/progs.am, lib/am/python.am, lib/am/scripts.am, lib/am/texinfos.am: Quote installation paths in install, uninstall, and installcheck rules, as well as in am__installdirs variables. This is for the sake of paths containing spaces. * lib/am/install.am (installdirs-am, installdirs): Do not try to create "" directories. * test/instspc.test: New file. * test/Makefile.am (TESTS): Add instspc.test. Report from James Amundson. * doc/automake.texi (Not Enough, Third-Party Makefiles): New nodes. (Extending): Make it a subsection of Not Enough. * lib/gnupload (GPG): Use an absolute path. Suggestion from Gary V. Vaughan. (passphrase): Unset it this variable before using it, in case it was exported. Report from Scott James Remnant. 2004-01-25 Alexandre Duret-Lutz <adl@gnu.org> * lib/gnupload (usage): Fix example. * Makefile.am (cvs-release): Fix call to gnupload. From Jim Meyering. 2004-01-24 Alexandre Duret-Lutz <adl@gnu.org> * lib/gnupload: New script. * lib/Makefile.am (EXTRA_DIST): Distribute gnupload. * Makefile.am (cvs-release): New target. 2004-01-23 Alexandre Duret-Lutz <adl@gnu.org> * lib/am/python.am (uninstall-%DIR%PYTHON): Remove extra `;'s. Fix python10.test. * m4/depout.m4 (_AM_OUTPUT_DEPENDENCY_COMMANDS): Use `s/xx//p' instead of `/xx/ s///p'; the latter fails when GNU sed is run with POSIXLY_CORRECT. Also strip superfluous -e. Report from Miloslav Trmac. 2004-01-22 Alexandre Duret-Lutz <adl@gnu.org> * tests/lex5.test: Sleep before calling AUTOMAKE the second time, this fixes a spurious failure reported by Andreas Schwab. Also make sure ylwrap is not installed unless needed, and exercise --no-force. 2004-01-20 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> (tiny change) * doc/automake.texi (Dist): Document limitations of distcheck-hook and DISTCHECK_CONFIGURE_FLAGS with regard to subdirs and subpackages. 2004-01-20 Alexandre Duret-Lutz <adl@gnu.org> * doc/automake.texi (Upgrading): New node. 2004-01-20 Gary V. Vaughan <gary@gnu.org> * automake.in (scan_autoconf_traces): AC_LIBTOOL_TAGS can be correctly called without arguments as evidenced by the libtool demo directories. 2004-01-13 Alexandre Duret-Lutz <adl@gnu.org> * tests/conflnk3.test: Skip if `test -e' does not work. Report from Lars Hecking. 2004-01-13 Jim Meyering <jim@meyering.net> * lib/install-sh: Change `\n \t' to `\n\t ' in `defaultIFS' assignment. Remove spurious SPACEs before TABs. 2004-01-12 Alexandre Duret-Lutz <adl@gnu.org> * lib/py-compile: Check input files after option processing. Ensure --basedir has an argument. * lib/am/python.am (install-%DIR%PYTHON): Do not run py-compile if nothing was installed. * tests/python10.test: New file. * tests/Makefile.am (TESTS): Add python10.test. Suggested by Sander Niemeijer. * tests/txinfo29.test: Remove autom4te.cache. Report from Greg Schafer. * lib/install-sh: Do not use "$@" in a context where it may be empty, for the sake of OSF1/Tru64's shell. Report from He Li. 2004-01-11 Alexandre Duret-Lutz <adl@gnu.org> * lib/config.sub, lib/config.guess, lib/texinfo.tex: New upstream versions. * m4/as.m4, m4/depend.m4, m4/maintainer.m4, m4/multi.m4: Update copyright years and serial. * m4/python.m4 (_AM_PYTHON_INTERPRETER_LIST): Add python2.4. 2004-01-10 Peter Eisentraut <peter_e@gmx.net> (tiny change) * m4/as.m4 (AM_PROG_AS): Format and align help string more consistently. * m4/depend.m4 (AM_DEP_TRACK): Likewise. * m4/lispdir.m4 (AM_PATH_LISPDIR): Likewise. * m4/maintainer.m4 (AM_MAINTAINER_MODE): Likewise. * m4/multi.m4 (AM_ENABLE_MULTILIB): Likewise. 2004-01-10 Paul Eggert <eggert@twinsun.com> * m4/lispdir.m4 (AM_PATH_LISPDIR): Don't use \? in sed regular expressions; it doesn't conform to POSIX. 2004-01-10 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (shadow_unconditionally): New function... (handle_source_transform): ... extracted from here. (am_install_var): Use shadow_unconditionally to define %DISTVAR%. * lib/am/data.am, lib/am/java.am, lib/am/lisp.am, lib/am/python.am, lib/am/script.am: Add %DISTVAR% to DIST_COMMON. * tests/cond33.test: Make sure all conditional files are distributed. Report from Ralf Corsepius. 2004-01-08 Alexandre Duret-Lutz <adl@gnu.org> * m4/mkdirp.m4 (AM_PROG_MKDIR_P): Append `.' to $(mkdir_p). * lib/install-sh: Accept `install-sh -d' with 0..n arguments, as well as `install-sh sources... dest' with multiple sources. * tests/cond33.test: New file. * tests/instsh2.test: Add more checks for install-sh. * tests/transform.test: Test for installdirs. * tests/Makefile.am (TESTS): Add cond33.test Report from Ralf Corsepius. * automake.in (handle_configure): Skip AC_CONFIG_LINKS items which do not look like DEST:SRC. * tests/conflnk3.test: Check for AC_CONFIG_LINKS($computed). 2004-01-07 Alexandre Duret-Lutz <adl@gnu.org> Fix for PR automake/289: * automake.in (Automake::Struct::libtool_tag): New attribute. Define it for the language that have a Libtool tag. (%libtool_tags): New variable. (handle_languages, define_compiler_variable) (define_linker_variable): Pass --tag=XXX to libtool if supported. (scan_autoconf_traces): Scan for _LT_AC_TAGCONFIG and AC_LIBTOOL_TAGS. * tests/libtool3.test, tests/subobj9.test: Check that --tag=XXX is output. 2003-01-07 Eric Sunshine <sunshine@sunshineco.com> (tiny change) * lib/am/configure.am (am__CONFIG_DISTCLEAN_FILES): Add config.status.lineno. 2004-01-07 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> (tiny change) * doc/automake.texi (Rebuilding): Typo. 2004-01-07 Alexandre Duret-Lutz <adl@gnu.org> * lib/am/Makefile.am (dist_am_DATA): Really add inst-vars.am. 2004-01-06 Alexandre Duret-Lutz <adl@gnu.org> * THANKS: Add Bruce Korb. 2004-01-05 Alexandre Duret-Lutz <adl@gnu.org> Mimic Paul Eggert's changes to Autoconf. * Makefile.am (automake, aclocal): Use `chmod a-w', not `chmod -w'. * lib/Automake/Makefile.am (Config.pm): Likewise. * m4/Makefile.am ($(top_srcdir)/m4/amversion.m4): Likewise. * lib/am/inst-vars.am: New file, define am__vpath_adj_setup, am__vpath_adj, and am__strip_dir. * lib/am/Makefile.am (dist_am_DATA): Add inst-vars.am. * lib/am/data.am, lib/am/lisp.am, lib/am/python.am, lib/am/scripts.am: Include inst-vars.am, and use $(am__vpath_adj), $(am__vpath_adj_setup), and $(am__strip_dir) in install and uninstall rules. This fixes installation of nobase_ files in VPATH setups with Sun and OSF1/Tru64 Make. * lib/am/libs.am, lib/am/ltlib.am: Include inst-vars.am, and use $(am__strip_dir) to simplify install and uninstall rules. * tests/nobase.test: Augment to check installation from VPATH builds. * automake.in (%transformed_files): New variable. (initialize_per_input): Reset it. (make_paragraphs): Fill %transformed_files, and define %FIRST% each time a file is transformed for the first time. (handle_configure): Do not define %FIRST_CONFIG_HIN%. (am_install_var): Do not define %FIRST%. * lib/am/remake-hdr.am: Use %?FIRST% instead of %?FIRST_CONFIG_HIN%. 2004-01-04 Alexandre Duret-Lutz <adl@gnu.org> * lib/texinfo.tex: New upstream version. * m4/mkdirp.m4: Do not use `-m 0755'. This overrides special bits and break setups where 775 directories are expected. Just obey umask as we did in the past. Report from Harlan Stenn. 2004-01-03 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (scan_texinfo_file): Do not compare $outfile to '' as $outfile might not be defined at all. * lib/Automake/Variable.pm (define): Rework the way we check Automake variable definition. Ensure consistent :=/+=/= definitions only for variables that have been and are defined by Automake, and make it an internal error. Ignore Automake attempts to touch a user variable, even with += assignments. * tests/txinfo29.test: New file. * tests/Makefile.am (TESTS): Add txinfo29.test. Reported by Bruce Korb. 2004-01-02 Tom Tromey <tromey@redhat.com> * automake.in (handle_source_transform): Don't generate dist variables when no-dist is set. (generate_makefile): Likewise. * tests/nodist3.test: Ensure that DIST_SOURCES is not created, and that dist target does not exist. Reported by Tom Fitzsimmons. 2004-01-02 Alexandre Duret-Lutz <adl@gnu.org> * tests/libtool5.test, tests/ltcond.test, tests/ltcond2.test, * tests/ltconv.test: Run automake with --add-missing, because the CVS version of libtoolize no longer install config.sub and config.guess by default. Fix for PR automake/319: * aclocal.in (scan_m4_files): Scan configure.ac. (trace_used_macros, write_aclocal): Remove configure.ac from the list of files to include. * tests/Makefile.am (TESTS): Add acloca15.test. * tests/acloca15.test: New file. * aclocal.in (%file_includes): New variable. (scan_configure_dep): Compile $m4_include_rx and $ac_require_rx once. (scan_file): Scan for included files, and process these files recursively. Fill %file_includes and %file_contents. Return the list of included files, not the contents. (scan_m4_files): Adjust calls to scan_files. (strip_redundant_includes): New function. (trace_used_macros): Call it. (write_aclocal): Likewise. Also check the mtime of included files. * tests/Makefile.am (TESTS): Add acloca14.test. * tests/acloca14.test: New file. Report from Phil Edwards. 2004-01-01 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (handle_languages): Do not define DEP_FILES. * m4/depout.m4 (_AM_OUTPUT_DEPENDENCY_COMMANDS): Extract included files with $(DEPDIR) in their name instead of DEP_FILES. * tests/depend.test, tests/depend4.test, tests/exsource.test: Adjust. Suggested by Tom Tromey. Do not output .lo rules for programs and static libraries objects, and do not output .o/.obj rules for libtool libraries. This is about explicit rules only, not inference rules. * automake.in (handle_single_transform_list): Rename as ... (handle_single_transform): ... this. Take a single file to transform (it was only called this way) and accept a new %transform argument. Fill %lang_specific_files with list references instead of strings, and append %transform to each of these lists. (define_objects_from_sources, handle_source_transform): Take a %transform argument, and forward it to &handle_single_transform. (handle_languages): Adjust to the new format of %lang_specific_files, and honor its %transform part. (handle_programs, handle_libraries, handle_ltlibraries): Override %NONLIBTOOL% and %LIBTOOL% while calling handle_source_transform. (make_paragraphs): Define %NONLIBTOOL% by default. Make sure %transform settings override global settings. * lib/am/depend2.am (%OBJ%, %OBJOBJ%): Define only if %NONLIBTOOL%. * tests/libtool3.test: Augment to check Makefile.ins for unneeded rules. Suggested by Thomas Fitzsimmons. * automake.in, aclocal.in: Bump copyright years. 2003-12-31 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (generate_makefile): Update misleading comment. * automake.in (handle_languages): Define %DEPBASE% conditionally on subdir-objects. Define SUBDIROBJ. Do not clean *_.c files here ... (lang_c_finish): ... do it here. (handle_single_transform_list): Do not output specific rules for subdir-objects files which are not renamed. This should reduce the size of Makefiles with lots of subdirectory sources. * lib/depcomp: Simplify computation of dependency output, and use DEPDIR. * lib/am/depend2.am (%EXT%.o, %EXT%.obj, %EXT%.lo): Adjust call to depcomp. Compute depbase on-the-fly in generic fastdep rules for subdir-objects. * tests/ansi9.test: Do not grep for an explicit rule that we no longer expect. Really run $MAKE to make sure the chain of rules works. * tests/yacc5.test: Do not grep for an explicit rule that we no longer expect. Adjust to use set -e. 2003-12-27 Alexandre Duret-Lutz <adl@gnu.org> * automake.in (@common_files): Move configure, configure.ac, and configure.in ... (@common_sometimes): ... here so that these files do not appear twice in DIST_COMMON. * automake.in (maybe_push_required_file): Add $(srcdir) in front a required files outside the current directory or its subdirectories. * lib/am/distdir.am (distdir): Update comment. Report from Nicolas Joly. 2003-12-26 Alexandre Duret-Lutz <adl@gnu.org> * doc/automake.texi (@copying): Do not repeat the version. (Top): Use @insertcopying. Add a @detailmenu, this works around Emacs 21's inability to lookup indices in sub-nodes (reported by Kevin Ryde). (C++ Support, Assembly Support, Fortran 77 Support, Java Support, Support for Other Languages, Preprocessing Fortran 77, Compiling Fortran 77 Files, Mixing Fortran 77 With C and C++, How the Linker is Chosen): Add missing descriptions in menus. (Fortran 77 and Autoconf): Remove, this node was just saying "use Autoconf 2.53 or greater". 2003-12-26 Santiago Vila <sanvila@unex.es> (tiny change) * NEWS: s/Gettext 1.12.1/Gettext 0.12.1/ 2003-12-25 Nicolas Joly <njoly@pasteur.fr> (tiny change) * doc/automake.texi (Conditional Sources): Typo. 2003-12-25 Alexandre Duret-Lutz <adl@gnu.org> * lib/Automake/Config.in: Require Exporter. Report from Kevin Ryde (failure with Perl 5.005_03). 2003-12-15 Alexandre Duret-Lutz <adl@gnu.org> * tests/aclocal6.test: Check for autom4te.cache only if it has been created. * tests/maintclean.test: Update comment. Report from Bruno Haible. * tests/txinfo24.test, tests/txinfo25.test, tests/txinfo28.test: Require texi2dvi-o. Report from V