## automake - create Makefile.in from Makefile.am
## Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2, or (at your option)
## any later version.
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
## 02111-1307, USA.
.texi.info:
## We want to force the .info file to be built in srcdir. This is
## probably the simplest way. However, at Cygnus .info files are
## always put into the build directory. So at runtime we select which
## rule to use.
## Note that we also remove the possible output files before running
## makeinfo. Otherwise, if the texinfo file shrinks (or if you start
## using --no-split), you'll be left with some dead info files lying
## around -- dead files which will end up in the distribution.
NOTCYGNUS @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
NOTCYGNUS cd $(srcdir) \
NOTCYGNUS && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
CYGNUS @rm -f $@ $@-[0-9] $@-[0-9][0-9]
CYGNUS $(MAKEINFO) -I $(srcdir) $<
.texi.dvi:
TEXINPUTS=@TEXINFODIR@:$$TEXINPUTS \
## Must set MAKEINFO like this so that version.texi will be found even
## if it is in srcdir.
MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.texi:
## We want to force the .info file to be built in srcdir. This is
## probably the simplest way. However, at Cygnus .info files are
## always put into the build directory. So at runtime we select which
## rule to use.
## Note that we also remove the possible output files before running
## makeinfo. Otherwise, if the texinfo file shrinks (or if you start
## using --no-split), you'll be left with some dead info files lying
## around -- dead files which will end up in the distribution.
NOTCYGNUS @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
NOTCYGNUS cd $(srcdir) \
NOTCYGNUS && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
CYGNUS @rm -f $@ $@-[0-9] $@-[0-9][0-9]
CYGNUS $(MAKEINFO) -I $(srcdir) $<
.texinfo.info:
## We want to force the .info file to be built in srcdir. This is
## probably the simplest way. However, at Cygnus .info files are
## always put into the build directory. So at runtime we select which
## rule to use.
## Note that we also remove the possible output files before running
## makeinfo. Otherwise, if the texinfo file shrinks (or if you start
## using --no-split), you'll be left with some dead info files lying
## around -- dead files which will end up in the distribution.
NOTCYGNUS @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
NOTCYGNUS cd $(srcdir) \
NOTCYGNUS && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
CYGNUS @rm -f $@ $@-[0-9] $@-[0-9][0-9]
CYGNUS $(MAKEINFO) -I $(srcdir) $<
.texinfo:
## We want to force the .info file to be built in srcdir. This is
## probably the simplest way. However, at Cygnus .info files are
## always put into the build directory. So at runtime we select which
## rule to use.
## Note that we also remove the possible output files before running
## makeinfo. Otherwise, if the texinfo file shrinks (or if you start
## using --no-split), you'll be left with some dead info files lying
## around -- dead files which will end up in the distribution.
NOTCYGNUS @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
NOTCYGNUS cd $(srcdir) \
NOTCYGNUS && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
CYGNUS @rm -f $@ $@-[0-9] $@-[0-9][0-9]
CYGNUS $(MAKEINFO) -I $(srcdir) $<
.texinfo.dvi:
TEXINPUTS=@TEXINFODIR@:$$TEXINPUTS \
## Must set MAKEINFO like this so that version.texi will be found even
## if it is in srcdir.
MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
## The way to make PostScript, for those who want it.
DVIPS = dvips
.dvi.ps:
$(DVIPS) $< -o $@
## Look in both . and srcdir because the info pages might have been
## rebuilt in the build directory. Can't cd to srcdir; that might
## break a possible install-sh reference.
## Funny name due to --cygnus influence; we want to reserve
## `install-info' for the user.
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(infodir)
@for file in $(INFO_DEPS); do \
CYGNUS if test -f $$file; then d=.; else d=$(srcdir); fi; \
NOTCYGNUS d=$(srcdir); \
## We use these strange circumlocutions because we want the "ifile" to
## be relative, for the install.
for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
if test -f $$d/$$ifile; then \
echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \
$(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \
else : ; fi; \
done; \
done
@$(POST_INSTALL)
## Only run this code if install-info actually exists, and it is not
## the Debian install-info. FIXME: once Debian install-info goes
## away, we can remove this hack.
@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
for file in $(INFO_DEPS); do \
## Run `:' after install-info in case install-info fails. We really
## don't care about failures here, because they can be spurious. For
## instance if you don't have a dir file, install-info will fail. I
## think instead it should create a new dir file for you. This bug
## causes the `make distcheck' target to fail reliably.
echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
## Use `|| :' here because Sun make passes -e to sh; if install-info
## fails then we'd fail if we used `;'.
install-info --info-dir=$(infodir) $(infodir)/$$file || :;\
done; \
else : ; fi
uninstall-info:
$(PRE_UNINSTALL)
## Run two loops here so that we can handle PRE_UNINSTALL and
## NORMAL_UNINSTALL correctly.
@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
ii=yes; \
else ii=; fi; \
for file in $(INFO_DEPS); do \
test -z $ii || install-info --info-dir=$(infodir) --remove $$file; \
done
$(NORMAL_UNINSTALL)
for file in $(INFO_DEPS); do \
(cd $(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
done
dist-info: $(INFO_DEPS)
for base in $(INFO_DEPS); do \
## In Cygnus mode, allow info file to be in source or build dir. In
## other modes, allow only source dir.
NOTCYGNUS d=$(srcdir); \
CYGNUS if test -f $$base; then d=.; else d=$(srcdir); fi; \
for file in `cd $$d && eval echo $$base*`; do \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file; \
done; \
done
