kc3-lang/freetype

diff --git a/ChangeLog b/ChangeLog
index ffea9d5..d432a48 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,16 @@
+2005-02-20  Werner Lemberg  <wl@gnu.org>
+
+	* builds/unix/ltmain.sh: Regenerated with `libtoolize --force
+	--copy' from libtool 1.5.14.
+	* builds/unix/aclocal.m4: Regenerated with `aclocal -I .' from
+	automake 1.9.4.
+
+	* builds/unix/config.guess, builds/unix/config.sub: Updated from
+	`config' CVS module at subversions.gnu.org.
+
+	* builds/unix/install-sh, builds/unix/mkinstalldirs: Updated from
+	`texinfo' CVS module at subversions.gnu.org.
+
 2005-02-14  Werner Lemberg  <wl@gnu.org>
 
 	* src/cff/cffcmap.c (cff_cmap_unicode_init): Don't try to build
diff --git a/builds/unix/aclocal.m4 b/builds/unix/aclocal.m4
index cf58adf..04d0613 100644
--- a/builds/unix/aclocal.m4
+++ b/builds/unix/aclocal.m4
@@ -669,7 +669,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* )
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -681,8 +681,20 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     # And add a safety zone
     lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
     ;;
-
- *)
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    # 
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  *)
     # If test is not a shell built-in, we'll probably end up computing a
     # maximum length that is only half of the actual maximum length, but
     # we can't tell.
@@ -1247,7 +1259,7 @@ cygwin* | mingw* | pw32*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
     ;;
@@ -1305,7 +1317,9 @@ kfreebsd*-gnu)
   dynamic_linker='GNU ld.so'
   ;;
 
-freebsd*)
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
   objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
   version_type=freebsd-$objformat
   case $version_type in
@@ -1324,7 +1338,7 @@ freebsd*)
   freebsd2*)
     shlibpath_overrides_runpath=yes
     ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
@@ -1450,7 +1464,7 @@ linux*)
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -1680,7 +1694,7 @@ if test -f "$ltmain" && test -n "$tagnames"; then
       case $tagname in
       CXX)
 	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || 
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
 	    (test "X$CXX" != "Xg++"))) ; then
 	  AC_LIBTOOL_LANG_CXX_CONFIG
 	else
@@ -2151,13 +2165,13 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | kfreebsd*-gnu)
+freebsd* | kfreebsd*-gnu | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
       lt_cv_file_magic_cmd=/usr/bin/file
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
@@ -2426,7 +2440,7 @@ AC_DEFUN([_LT_AC_PROG_CXXCPP],
 [
 AC_REQUIRE([AC_PROG_CXX])
 if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || 
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
     (test "X$CXX" != "Xg++"))) ; then
   AC_PROG_CXXCPP
 fi
@@ -2763,7 +2777,7 @@ case $host_os in
     _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
     if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
       # We only want to do this on AIX 4.2 and lower, the check
       # below for broken collect2 doesn't work under 4.3+
 	collect2name=`${CC} -print-prog-name=collect2`
@@ -2784,6 +2798,9 @@ case $host_os in
 	fi
       esac
       shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
     else
       # not using gcc
       if test "$host_cpu" = ia64; then
@@ -2947,14 +2964,14 @@ case $host_os in
 	;;
     esac
     ;;
-  freebsd[12]*)
+  freebsd[[12]]*)
     # C++ shared libraries reported to be fairly broken before switch to ELF
     _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
   freebsd-elf*)
     _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
     ;;
-  freebsd* | kfreebsd*-gnu)
+  freebsd* | kfreebsd*-gnu | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     _LT_AC_TAGVAR(ld_shlibs, $1)=yes
@@ -2985,7 +3002,7 @@ case $host_os in
       # explicitly linking system object files so we need to strip them
       # from the output so that they don't get included in the library
       # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
       ;;
     *)
       if test "$GXX" = yes; then
@@ -3143,8 +3160,12 @@ case $host_os in
   	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  ;;
 	*)  # Version 8.0 or newer
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	  ;;
 	esac
 	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -3152,6 +3173,14 @@ case $host_os in
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
+      pgCC)
+        # Portland Group C++ compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+        ;;
       cxx)
 	# Compaq C++
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
@@ -3390,7 +3419,7 @@ case $host_os in
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
 	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
 	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
 	  *)
 	    # The C++ compiler is used as linker so we must use $wl
 	    # flag to pass the commands to the underlying system
@@ -3767,7 +3796,7 @@ _LT_AC_TAGVAR(objext, $1)=$objext
 lt_simple_compile_test_code="class foo {}\n"
 
 # Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
 
 # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 _LT_AC_SYS_COMPILER
@@ -4009,6 +4038,12 @@ fast_install=$enable_fast_install
 # The host system.
 host_alias=$host_alias
 host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
 # An echo program that does not interpret backslashes.
 echo=$lt_echo
@@ -4359,9 +4394,6 @@ symcode='[[BCDEGRST]]'
 # Regexp to match symbols that can be accessed directly from C.
 sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
 # Transform an extracted symbol line into a proper C declaration
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
 
@@ -4421,8 +4453,11 @@ esac
 # Try without a prefix undercore, then with it.
 for ac_symprfx in "" "_"; do
 
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
   # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -4640,7 +4675,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    ;;
 	esac
 	;;
-      freebsd* | kfreebsd*-gnu)
+      freebsd* | kfreebsd*-gnu | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
@@ -4686,12 +4721,18 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
 	    ;;
-	  icpc)
+	  icpc* | ecpc*)
 	    # Intel C++
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
+	  pgCC)
+	    # Portland Group C++ compiler.
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
 	  cxx)
 	    # Compaq C++
 	    # Make sure the PIC flag is empty.  It appears that all Alpha
@@ -4925,12 +4966,19 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       ;;
 
     linux*)
-      case $CC in
+      case $cc_basename in
       icc* | ecc*)
 	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
         ;;
+      pgcc | pgf77 | pgf90)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
       ccc*)
         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
         # All Alpha code is PIC.
@@ -4975,6 +5023,11 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       fi
       ;;
 
+    unicos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
     uts4*)
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -5035,7 +5088,7 @@ ifelse([$1],[CXX],[
     _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
   cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   *)
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
@@ -5148,7 +5201,7 @@ EOF
       _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_AC_TAGVAR(always_export_symbols, $1)=no
       _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
 
       if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
@@ -5162,7 +5215,7 @@ EOF
 	fi~
 	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
       else
-	ld_shlibs=no
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
@@ -5206,11 +5259,21 @@ EOF
 
   linux*)
     if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-        tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
+      tmp_addflag=
+      case $CC,$host_cpu in
+      pgf77* | pgf90* )			# Portland Group f77 and f90 compilers
+        tmp_addflag=' -fpic' ;;
+      ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+        tmp_addflag=' -i_dynamic' ;;
+      efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+        tmp_addflag=' -i_dynamic -nofor_main' ;;
+      ifc* | ifort*)			# Intel Fortran compiler
+      	tmp_addflag=' -nofor_main' ;;
+      esac
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
       supports_anon_versioning=no
       case `$LD -v 2>/dev/null` in
-        *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
         *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
         *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
         *\ 2.11.*) ;; # other 2.11 versions
@@ -5220,9 +5283,9 @@ EOF
         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
 cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 $echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
       else
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)=$_LT_AC_TAGVAR(archive_cmds, $1)
       fi
     else
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -5312,7 +5375,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
       if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
 	# We only want to do this on AIX 4.2 and lower, the check
 	# below for broken collect2 doesn't work under 4.3+
 	  collect2name=`${CC} -print-prog-name=collect2`
@@ -5333,6 +5396,9 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  fi
 	esac
 	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -5412,7 +5478,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
       # FIXME: Should let the user specify the lib program.
       _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
       _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
       ;;
 
@@ -5496,7 +5562,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
@@ -5685,7 +5751,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       case $host_os in
       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
       *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;;
       esac
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
       ;;
@@ -5946,7 +6012,7 @@ lt_ac_count=0
 # Add /usr/xpg4/bin/sed as it is typically found on Solaris
 # along with /bin/sed that truncates output.
 for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && break
+  test ! -f $lt_ac_sed && continue
   cat /dev/null > conftest.in
   lt_ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
diff --git a/builds/unix/config.guess b/builds/unix/config.guess
index 8229471..892833f 100644
--- a/builds/unix/config.guess
+++ b/builds/unix/config.guess
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2004-11-12'
+timestamp='2005-02-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -53,7 +53,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -804,6 +804,9 @@ EOF
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
 	exit 0 ;;
+    amd64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit 0 ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
 	exit 0 ;;
@@ -1197,6 +1200,9 @@ EOF
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit 0 ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit 0 ;;
     NSR-?:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
 	exit 0 ;;
diff --git a/builds/unix/config.sub b/builds/unix/config.sub
index 0f84ac2..d8fd2f8 100644
--- a/builds/unix/config.sub
+++ b/builds/unix/config.sub
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2004-11-30'
+timestamp='2005-02-10'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -70,7 +70,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -237,7 +237,7 @@ case $basic_machine in
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | mcore \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -310,7 +310,7 @@ case $basic_machine in
 	| ip2k-* | iq2000-* \
 	| m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
diff --git a/builds/unix/install-sh b/builds/unix/install-sh
index 6ebe46d..1a83534 100644
--- a/builds/unix/install-sh
+++ b/builds/unix/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2004-12-17.09
+scriptversion=2005-02-02.21
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -109,7 +109,7 @@ while test -n "$1"; do
         shift
         continue;;
 
-    --help) echo "$usage"; exit 0;;
+    --help) echo "$usage"; exit $?;;
 
     -m) chmodcmd="$chmodprog $2"
         shift
@@ -134,7 +134,7 @@ while test -n "$1"; do
 	shift
 	continue;;
 
-    --version) echo "$0 $scriptversion"; exit 0;;
+    --version) echo "$0 $scriptversion"; exit $?;;
 
     *)  # When -d is used, all remaining arguments are directories to create.
 	# When -t is used, the destination is already specified.
diff --git a/builds/unix/ltmain.sh b/builds/unix/ltmain.sh
index 761e1fd..0b54f84 100644
--- a/builds/unix/ltmain.sh
+++ b/builds/unix/ltmain.sh
@@ -1,7 +1,7 @@
 # ltmain.sh - Provide generalized library-building support services.
 # NOTE: Changing this file will not affect anything until you rerun configure.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
@@ -43,8 +43,8 @@ EXIT_FAILURE=1
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.5.10
-TIMESTAMP=" (1.1220.2.130 2004/09/19 12:13:49)"
+VERSION=1.5.14
+TIMESTAMP=" (1.1220.2.195 2005/02/12 12:12:33)"
 
 # See if we are running on zsh, and set the options which allow our
 # commands through without removal of \ escapes.
@@ -132,6 +132,7 @@ show_help=
 execute_dlfiles=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+quote_scanset='[[~#^*{};<>?'"'"' 	]'
 
 #####################################
 # Shell function definitions:
@@ -143,7 +144,8 @@ o2lo="s/\\.${objext}\$/.lo/"
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
-func_win32_libid () {
+func_win32_libid ()
+{
   win32_libid_type="unknown"
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
@@ -183,12 +185,13 @@ func_win32_libid () {
 # Only attempt this if the compiler in the base compile
 # command doesn't match the default compiler.
 # arg is usually of the form 'gcc ...'
-func_infer_tag () {
+func_infer_tag ()
+{
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
 	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	  arg="\"$arg\""
 	  ;;
 	esac
@@ -209,7 +212,7 @@ func_infer_tag () {
 	    for arg in $CC; do
 	    # Double-quote args containing other shell metacharacters.
 	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	      arg="\"$arg\""
 	      ;;
 	    esac
@@ -242,8 +245,48 @@ func_infer_tag () {
 }
 
 
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    f_ex_an_ar_lib=`$echo "X$f_ex_an_ar_oldlib" | $Xsed -e 's%^.*/%%'`
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+      $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+      $show "cp $f_ex_an_ar_oldlib $f_ex_an_ar_dir/$f_ex_an_ar_lib"
+      $run eval "cp \$f_ex_an_ar_oldlib \$f_ex_an_ar_dir/\$f_ex_an_ar_lib"
+      $AR t "$f_ex_an_ar_oldlib" | sort | uniq -c \
+	| $EGREP -v '^[ 	]*1[ 	]' | while read count name
+      do
+	i=1
+	while test "$i" -le "$count"
+	  do
+	  # Put our $i before any first dot (extension)
+	  # Never overwrite any file
+	  name_to="$name"
+	  while test "X$name_to" = "X$name" || test -f "$f_ex_an_ar_dir/$name_to"
+	    do
+	    name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+	  done
+	  $show "(cd $f_ex_an_ar_dir && $AR x  $f_ex_an_ar_lib '$name' && $mv '$name' '$name_to')"
+	  $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_lib '$name' && $mv '$name' '$name_to' && $AR -d \$f_ex_an_ar_lib '$name')" || exit $?
+	  i=`expr $i + 1`
+	done
+      done
+      $show "$rm $f_ex_an_ar_dir/$f_ex_an_ar_lib"
+      $run eval "$rm \$f_ex_an_ar_dir/\$f_ex_an_ar_lib"
+    fi
+}
+
 # func_extract_archives gentop oldlib ...
-func_extract_archives () {
+func_extract_archives ()
+{
     my_gentop="$1"; shift
     my_oldlibs=${1+"$@"}
     my_oldobjs=""
@@ -287,7 +330,7 @@ func_extract_archives () {
 	  cd $my_xdir || exit $?
 	  darwin_archive=$my_xabs
 	  darwin_curdir=`pwd`
-	  darwin_base_archive=`basename $darwin_archive`
+	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
 	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
 	  if test -n "$darwin_arches"; then 
 	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
@@ -296,64 +339,33 @@ func_extract_archives () {
 	    for darwin_arch in  $darwin_arches ; do
 	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
 	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      # Remove the table of contents from the thin files.
-	      $AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF 2>/dev/null || true
-	      $AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF\ SORTED 2>/dev/null || true
 	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      $AR -xo "${darwin_base_archive}"
-	      rm "${darwin_base_archive}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
 	      cd "$darwin_curdir"
+	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
 	    done # $darwin_arches
       ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f | xargs basename | sort -u | $NL2SP`
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
 	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
 	      lipo -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
-	    rm -rf unfat-$$
+	    ${rm}r unfat-$$
 	    cd "$darwin_orig_dir"
 	  else
-	    cd $darwin_orig_dir
-	    (cd $my_xdir && $AR x $my_xabs) || exit $?
+	    cd "$darwin_orig_dir"
+ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
 	  fi # $darwin_arches
 	fi # $run
       ;;
       *)
-	# We will extract separately just the conflicting names and we will
-	# no longer touch any unique names. It is faster to leave these
-	# extract automatically by $AR in one run.
-	$show "(cd $my_xdir && $AR x $my_xabs)"
-	$run eval "(cd \$my_xdir && $AR x \$my_xabs)" || exit $?
-	if ($AR t "$my_xabs" | sort | sort -uc >/dev/null 2>&1); then
-	  :
-	else
-	  $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-	  $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-	  $AR t "$my_xabs" | sort | uniq -cd | while read -r count name
-	  do
-	    i=1
-	    while test "$i" -le "$count"
-	    do
-	      # Put our $i before any first dot (extension)
-	      # Never overwrite any file
-	      name_to="$name"
-	      while test "X$name_to" = "X$name" || test -f "$my_xdir/$name_to"
-	      do
-		name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-	      done
-	      $show "(cd $my_xdir && $AR xN $i $my_xabs '$name' && $mv '$name' '$name_to')"
-	      $run eval "(cd \$my_xdir && $AR xN $i \$my_xabs '$name' && $mv '$name' '$name_to')" || exit $?
-	      i=`expr $i + 1`
-	    done
-	  done
-	fi
-	;;
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
       esac
       my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
     done
-
     func_extract_archives_result="$my_oldobjs"
 }
 # End of Shell function definitions
@@ -426,10 +438,10 @@ do
   --version)
     $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
     $echo
-    $echo "Copyright (C) 2003  Free Software Foundation, Inc."
+    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
     $echo "This is free software; see the source for copying conditions.  There is NO"
     $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $EXIT_SUCCESS
+    exit $?
     ;;
 
   --config)
@@ -438,7 +450,7 @@ do
     for tagname in $taglist; do
       ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
     done
-    exit $EXIT_SUCCESS
+    exit $?
     ;;
 
   --debug)
@@ -463,7 +475,7 @@ do
     else
       $echo "disable static libraries"
     fi
-    exit $EXIT_SUCCESS
+    exit $?
     ;;
 
   --finish) mode="finish" ;;
@@ -520,7 +532,7 @@ if test -z "$show_help"; then
   # Infer the operation mode.
   if test -z "$mode"; then
     $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
     case $nonopt in
     *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
       mode=link
@@ -637,7 +649,7 @@ if test -z "$show_help"; then
 	    # Many Bourne shells cannot handle close brackets correctly
 	    # in scan sets, so we specify it separately.
 	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	      arg="\"$arg\""
 	      ;;
 	    esac
@@ -668,8 +680,11 @@ if test -z "$show_help"; then
       case $lastarg in
       # Double-quote args containing other shell metacharacters.
       # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
+      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	lastarg="\"$lastarg\""
 	;;
       esac
@@ -1104,7 +1119,7 @@ EOF
       arg="$1"
       shift
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
 	;;
       *) qarg=$arg ;;
@@ -1348,6 +1363,11 @@ EOF
 	  prev=
 	  continue
 	  ;;
+        darwin_framework)
+	  compiler_flags="$compiler_flags $arg"
+	  prev=
+	  continue
+	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
@@ -1406,6 +1426,12 @@ EOF
 	continue
 	;;
 
+      -framework)
+        prev=darwin_framework
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
       -inst-prefix-dir)
 	prev=inst_prefix
 	continue
@@ -1466,7 +1492,7 @@ EOF
 	    # These systems don't actually have a C library (as such)
 	    test "X$arg" = "X-lc" && continue
 	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    test "X$arg" = "X-lc" && continue
 	    ;;
@@ -1477,7 +1503,7 @@ EOF
 	  esac
 	elif test "X$arg" = "X-lc_r"; then
 	 case $host in
-	 *-*-openbsd* | *-*-freebsd*)
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
@@ -1487,8 +1513,20 @@ EOF
 	continue
 	;;
 
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+	compile_command="$compile_command $arg"
+	compiler_flags="$compiler_flags $arg"
+	finalize_command="$finalize_command $arg"
+	prev=xcompiler
+	continue
+	;;
+
      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-	deplibs="$deplibs $arg"
+	compiler_flags="$compiler_flags $arg"
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
 	continue
 	;;
 
@@ -1497,18 +1535,19 @@ EOF
 	continue
 	;;
 
-      # gcc -m* arguments should be passed to the linker via $compiler_flags
-      # in order to pass architecture information to the linker
-      # (e.g. 32 vs 64-bit).  This may also be accomplished via -Wl,-mfoo
-      # but this is not reliable with gcc because gcc may use -mfoo to
-      # select a different linker, different libraries, etc, while
-      # -Wl,-mfoo simply passes -mfoo to the linker.
-      -m*)
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
+
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	  arg="\"$arg\""
 	  ;;
 	esac
@@ -1624,7 +1663,7 @@ EOF
 	for flag in $args; do
 	  IFS="$save_ifs"
 	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	    flag="\"$flag\""
 	    ;;
 	  esac
@@ -1642,7 +1681,7 @@ EOF
 	for flag in $args; do
 	  IFS="$save_ifs"
 	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	    flag="\"$flag\""
 	    ;;
 	  esac
@@ -1675,7 +1714,7 @@ EOF
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	  arg="\"$arg\""
 	  ;;
 	esac
@@ -1809,7 +1848,7 @@ EOF
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
 	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	*$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	  arg="\"$arg\""
 	  ;;
 	esac
@@ -1976,7 +2015,7 @@ EOF
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
-	    deplibs="$deplib $deplibs"
+	    compiler_flags="$compiler_flags $deplib"
 	  fi
 	  continue
 	  ;;
@@ -1985,10 +2024,6 @@ EOF
 	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
 	    continue
 	  fi
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
 	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
 	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
 	    for search_ext in .la $std_shrext .so .a; do
@@ -2188,6 +2223,8 @@ EOF
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
 	shouldnotlink=no
+	avoidtemprpath=
+
 
 	# Read the .la file
 	case $lib in
@@ -2286,6 +2323,7 @@ EOF
 	    dir="$libdir"
 	    absdir="$libdir"
 	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
 	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
 	    dir="$ladir"
@@ -2370,7 +2408,7 @@ EOF
 	  if test -n "$library_names" &&
 	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
 	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var"; then
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
 	      case "$temp_rpath " in
 	      *" $dir "*) ;;
@@ -3084,7 +3122,7 @@ EOF
 
 	# Check that each of the things are valid numbers.
 	case $current in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
@@ -3093,7 +3131,7 @@ EOF
 	esac
 
 	case $revision in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
@@ -3102,7 +3140,7 @@ EOF
 	esac
 
 	case $age in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
 	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
@@ -3336,7 +3374,7 @@ EOF
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
 	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    test "X$arg" = "X-lc" && continue
 	    ;;
@@ -3873,6 +3911,7 @@ EOF
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
+	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
@@ -3882,7 +3921,7 @@ EOF
 	  delfiles=
 	  last_robj=
 	  k=1
-	  output=$output_objdir/$save_output-${k}.$objext
+	  output=$output_objdir/$output_la-${k}.$objext
 	  # Loop over the list of objects to be linked.
 	  for obj in $save_libobjs
 	  do
@@ -3902,9 +3941,9 @@ EOF
 		# the last one created.
 		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
 	      fi
-	      last_robj=$output_objdir/$save_output-${k}.$objext
+	      last_robj=$output_objdir/$output_la-${k}.$objext
 	      k=`expr $k + 1`
-	      output=$output_objdir/$save_output-${k}.$objext
+	      output=$output_objdir/$output_la-${k}.$objext
 	      objlist=$obj
 	      len=1
 	    fi
@@ -3924,13 +3963,13 @@ EOF
 	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
           fi
 
-	  # Set up a command to remove the reloadale object files
+	  # Set up a command to remove the reloadable object files
 	  # after they are used.
 	  i=0
 	  while test "$i" -lt "$k"
 	  do
 	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
 	  done
 
 	  $echo "creating a temporary reloadable object file: $output"
@@ -4327,12 +4366,12 @@ extern \"C\" {
 
 	    # Prepare the list of exported symbols
 	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
+	      export_symbols="$output_objdir/$outputname.exp"
 	      $run $rm $export_symbols
 	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
 	    else
-	      $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      $run eval 'mv "$nlist"T "$nlist"'
 	    fi
 	  fi
@@ -4384,7 +4423,26 @@ extern \"C\" {
 #endif
 
 /* The mapping between symbol names and symbols. */
+"
+
+	    case $host in
+	    *cygwin* | *mingw* )
+	  $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+	      ;;
+	    * )
+	  $echo >> "$output_objdir/$dlsyms" "\
 const struct {
+"
+	      ;;
+	    esac
+
+
+	  $echo >> "$output_objdir/$dlsyms" "\
   const char *name;
   lt_ptr address;
 }
@@ -4613,7 +4671,7 @@ static const void *lt_preloaded_setup() {
 	esac
 	case $host in
 	  *cygwin* | *mingw* )
-	    cwrappersource=`$echo ${objdir}/lt-${output}.c`
+	    cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
 	    cwrapper=`$echo ${output}.exe`
 	    $rm $cwrappersource $cwrapper
 	    trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
@@ -5271,7 +5329,7 @@ relink_command=\"$relink_command\""
       # Aesthetically quote it.
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	arg="\"$arg\""
 	;;
       esac
@@ -5287,7 +5345,7 @@ relink_command=\"$relink_command\""
     # Aesthetically quote it.
     arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
     case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+    *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
       arg="\"$arg\""
       ;;
     esac
@@ -5335,7 +5393,7 @@ relink_command=\"$relink_command\""
       # Aesthetically quote the argument.
       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
 	arg="\"$arg\""
 	;;
       esac
@@ -6374,7 +6432,7 @@ esac
 $echo
 $echo "Try \`$modename --help' for more information about other modes."
 
-exit $EXIT_SUCCESS
+exit $?
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
diff --git a/builds/unix/mkinstalldirs b/builds/unix/mkinstalldirs
index 6fbe5e1..5d26a48 100644
--- a/builds/unix/mkinstalldirs
+++ b/builds/unix/mkinstalldirs
@@ -1,7 +1,7 @@
 #! /bin/sh
 # mkinstalldirs --- make directory hierarchy
 
-scriptversion=2004-02-15.20
+scriptversion=2005-02-02.21
 
 # Original author: Noah Friedman <friedman@prep.ai.mit.edu>
 # Created: 1993-05-16
@@ -27,7 +27,7 @@ while test $# -gt 0 ; do
   case $1 in
     -h | --help | --h*)         # -h for help
       echo "$usage"
-      exit 0
+      exit $?
       ;;
     -m)                         # -m PERM arg
       shift
@@ -37,7 +37,7 @@ while test $# -gt 0 ; do
       ;;
     --version)
       echo "$0 $scriptversion"
-      exit 0
+      exit $?
       ;;
     --)                         # stop option processing
       shift