kc3-lang/freetype

diff --git a/ChangeLog b/ChangeLog
index f42cf62..2b315e9 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,17 @@
+2004-12-28  Werner Lemberg  <wl@gnu.org>
+
+	* builds/unix/ltmain.sh: Regenerated with `libtoolize --force
+	--copy' from libtool 1.5.10.
+	* builds/unix/aclocal.m4: Regenerated with `aclocal -I .' from
+	automake 1.9.4.
+	* builds/unix/configure: Regenerated with autoconf 2.59b.
+
+	* builds/unix/config.guess, builds/unix/config.sub: Updated from
+	`config' CVS module at subversions.gnu.org.
+
+	* builds/unix/install-sh: Updated from
+	`texinfo' CVS module at subversions.gnu.org.
+
 2004-12-27  Dirck Blaskey  <listtarget@danbala.com>
 
 	* src/cff/cffobjs.c (cff_face_init): Improve computation of
diff --git a/builds/unix/aclocal.m4 b/builds/unix/aclocal.m4
index ceda545..cf58adf 100644
--- a/builds/unix/aclocal.m4
+++ b/builds/unix/aclocal.m4
@@ -1,4 +1,4 @@
-# generated automatically by aclocal 1.8a -*- Autoconf -*-
+# generated automatically by aclocal 1.9.4 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
 # Free Software Foundation, Inc.
@@ -191,6 +191,8 @@ if test -n "$RANLIB"; then
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
 # Only perform the check for file, if the check method requires it
 case $deplibs_check_method in
 file_magic*)
@@ -308,7 +310,7 @@ fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
@@ -667,11 +669,25 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
+  netbsd* | freebsd* | openbsd* | darwin* )
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    ;;
+
  *)
     # If test is not a shell built-in, we'll probably end up computing a
     # maximum length that is only half of the actual maximum length, but
     # we can't tell.
-    while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
 	       = "XX$teststring") >/dev/null 2>&1 &&
 	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
 	    lt_cv_sys_max_cmd_len=$new_result &&
@@ -1005,8 +1021,8 @@ AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
 _LT_AC_TAGVAR(hardcode_action, $1)=
 if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
+   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
@@ -1173,7 +1189,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[[45]]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1497,7 +1513,7 @@ nto-qnx*)
 openbsd*)
   version_type=sunos
   need_lib_prefix=no
-  need_version=yes
+  need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -1663,7 +1679,9 @@ if test -f "$ltmain" && test -n "$tagnames"; then
 
       case $tagname in
       CXX)
-	if test -n "$CXX" && test "X$CXX" != "Xno"; then
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || 
+	    (test "X$CXX" != "Xg++"))) ; then
 	  AC_LIBTOOL_LANG_CXX_CONFIG
 	else
 	  tagname=""
@@ -2068,6 +2086,15 @@ case $reload_flag in
 *) reload_flag=" $reload_flag" ;;
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
 ])# AC_PROG_LD_RELOAD_FLAG
 
 
@@ -2101,7 +2128,7 @@ beos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-bsdi4*)
+bsdi[[45]]*)
   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
@@ -2174,15 +2201,6 @@ irix5* | irix6* | nonstopux*)
 
 # This must be Linux ELF.
 linux*)
-  case $host_cpu in
-  alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*)
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -2205,12 +2223,10 @@ nto-qnx*)
   ;;
 
 openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   fi
   ;;
 
@@ -2400,10 +2416,21 @@ AC_DEFUN([AC_LIBTOOL_CXX],
 # ---------------
 AC_DEFUN([_LT_AC_LANG_CXX],
 [AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
 _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
 ])# _LT_AC_LANG_CXX
 
+# _LT_AC_PROG_CXXCPP
+# ---------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || 
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
 
 # AC_LIBTOOL_F77
 # --------------
@@ -2539,43 +2566,6 @@ aix4* | aix5*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
-  ;;
-  darwin* | rhapsody*)
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[[012]])
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-      ;;
-    esac
-    output_verbose_link_cmd='echo'
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-    _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-  else
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-  fi
     ;;
 esac
 AC_MSG_RESULT([$enable_shared])
@@ -2601,7 +2591,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
 AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
 [AC_LANG_PUSH(C++)
 AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
 
 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_AC_TAGVAR(allow_undefined_flag, $1)=
@@ -2853,6 +2843,7 @@ case $host_os in
     esac
     ;;
 
+
   cygwin* | mingw* | pw32*)
     # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
     # as there is no search path for DLLs.
@@ -2876,57 +2867,68 @@ case $host_os in
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
     fi
   ;;
+      darwin* | rhapsody*)
+        case "$host_os" in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
-  darwin* | rhapsody*)
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    case "$host_os" in
-    rhapsody* | darwin1.[[012]])
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
       else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[[012]])
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
-            ;;
-        esac
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
       fi
-      ;;
-    esac
-    lt_int_apple_cc_single_mod=no
-    output_verbose_link_cmd='echo'
-    if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-      lt_int_apple_cc_single_mod=yes
-    fi
-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    else
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    fi
-    _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-  else
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-  fi
-    ;;
+        ;;
 
   dgux*)
     case $cc_basename in
@@ -3132,9 +3134,20 @@ case $host_os in
       icpc)
 	# Intel C++
 	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
 	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
@@ -3191,6 +3204,22 @@ case $host_os in
     # Workaround some broken pre-1.5 toolchains
     output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
     ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  openbsd*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
   osf3*)
     case $cc_basename in
       KCC)
@@ -3949,7 +3978,7 @@ Xsed="$SED -e s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 # The names of the tagged configurations supported by this script.
 available_tags=
@@ -4354,6 +4383,13 @@ hpux*) # Its linker distinguishes data from code symbols
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDGIRSTW]]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
 irix* | nonstopux*)
   symcode='[[BCDEGRST]]'
   ;;
@@ -4581,6 +4617,16 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	  ;;
 	esac
 	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case "$cc_basename" in
+           xlc*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           ;;
+         esac
+       ;;
       dgux*)
 	case $cc_basename in
 	  ec++)
@@ -4834,6 +4880,16 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case "$cc_basename" in
+         xlc*)
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       esac
+       ;;
 
     mingw* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -5335,7 +5391,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(ld_shlibs, $1)=no
       ;;
 
-    bsdi4*)
+    bsdi[[45]]*)
       _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
       ;;
 
@@ -5361,52 +5417,52 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       ;;
 
     darwin* | rhapsody*)
-    if test "$GXX" = yes ; then
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       case "$host_os" in
-      rhapsody* | darwin1.[[012]])
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[[012]])
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-	;;
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_direct, $1)=no
       _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
     else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
     fi
       ;;
 
@@ -5551,6 +5607,7 @@ $echo "local: *; };" >> $output_objdir/$libname.ver~
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
       else
@@ -5914,9 +5971,9 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
     fi
   done
 done
-SED=$lt_cv_path_SED
 ])
+SED=$lt_cv_path_SED
 AC_MSG_RESULT([$SED])
 ])
 
-m4_include([./ft-munmap.m4])
+m4_include([ft-munmap.m4])
diff --git a/builds/unix/config.guess b/builds/unix/config.guess
index c28419d..8229471 100644
--- a/builds/unix/config.guess
+++ b/builds/unix/config.guess
@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
 
-timestamp='2004-10-25'
+timestamp='2004-11-12'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -319,6 +319,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:OS/390:*:*)
 	echo i370-ibm-openedition
 	exit 0 ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit 0 ;;
     *:OS400:*:*)
         echo powerpc-ibm-os400
 	exit 0 ;;
diff --git a/builds/unix/config.sub b/builds/unix/config.sub
index edb6b66..0f84ac2 100644
--- a/builds/unix/config.sub
+++ b/builds/unix/config.sub
@@ -3,7 +3,7 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
 
-timestamp='2004-08-29'
+timestamp='2004-11-30'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -267,7 +267,7 @@ case $basic_machine in
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
@@ -343,8 +343,8 @@ case $basic_machine in
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
@@ -489,6 +489,10 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -1029,6 +1033,10 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
@@ -1297,6 +1305,9 @@ case $os in
 	-kaos*)
 		os=-kaos
 		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
 	-none)
 		;;
 	*)
diff --git a/builds/unix/configure b/builds/unix/configure
index 947bb30..9ab9e91 100644
--- a/builds/unix/configure
+++ b/builds/unix/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59a.
+# Generated by GNU Autoconf 2.59b.
 #
 # Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002,
 # 2003, 2004 Free Software Foundation, Inc.
@@ -17,9 +17,11 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  setopt NO_GLOB_SUBST
+elif test -n "${BASH_VERSION+set}${KSH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
 
@@ -72,12 +74,14 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+  { echo "$as_me: error: cannot find myself; rerun with an absolute file name" >&2
    { (exit 1); exit 1; }; }
 fi
 
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -91,7 +95,7 @@ do
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
@@ -183,7 +187,7 @@ test \$exitcode = 0) || { (exit 1); exit 1; }
 ") 2> /dev/null; then
   :
 else
-  as_candidate_shells="$SHELL"
+  as_candidate_shells=
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
@@ -198,7 +202,7 @@ do
 done
 
 
-      for as_shell in $as_candidate_shells; do
+      for as_shell in $as_candidate_shells $SHELL; do
 	 if { $as_shell 2> /dev/null <<\_ASEOF
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -207,9 +211,11 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  setopt NO_GLOB_SUBST
+elif test -n "${BASH_VERSION+set}${KSH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
 :
@@ -225,9 +231,11 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  setopt NO_GLOB_SUBST
+elif test -n "${BASH_VERSION+set}${KSH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
 :
@@ -291,8 +299,9 @@ fi
       done
 
       if test "x$CONFIG_SHELL" != x; then
-  $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-        $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+  for as_var in BASH_ENV ENV
+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+        done
         export CONFIG_SHELL
         exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
@@ -501,7 +510,7 @@ fi
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test -z "$ECHO"; then
 if test "X${echo_test_string+set}" != Xset; then
@@ -727,6 +736,7 @@ infodir='${prefix}/info'
 mandir='${prefix}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
@@ -740,7 +750,9 @@ do
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -1031,7 +1043,7 @@ if test -n "$ac_prev"; then
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute paths.
+# Be sure to have absolute directory names.
 for ac_var in exec_prefix prefix
 do
   eval ac_val=$`echo $ac_var`
@@ -1042,7 +1054,7 @@ do
   esac
 done
 
-# Be sure to have absolute paths.
+# Be sure to have absolute directory names.
 for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
 	      localstatedir libdir includedir oldincludedir infodir mandir
 do
@@ -1303,15 +1315,15 @@ case $srcdir in
     else
        ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
     fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
     ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
+  *) # Relative name.
     ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
     ac_top_srcdir=$ac_top_builddir$srcdir ;;
 esac
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
+# Do not use `cd foo && pwd` to compute absolute names, because
 # the directories may not exist.
 case `pwd` in
 .) ac_abs_builddir="$ac_dir";;
@@ -1365,7 +1377,7 @@ esac
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi
-    cd $ac_popdir
+    cd "$ac_popdir"
   done
 fi
 
@@ -1386,7 +1398,7 @@ This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by $as_me, which was
-generated by GNU Autoconf 2.59a.  Invocation command line was
+generated by GNU Autoconf 2.59b.  Invocation command line was
 
   $ $0 $@
 
@@ -2233,28 +2245,39 @@ ac_clean_files="$ac_clean_files a.out a.exe b.out"
 echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
 echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort.  b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions.  Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
 if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
   (eval $ac_link_default) 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
+  # Be careful to initialize this variable, since it used to be cached.
 # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
 ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+for ac_file in $ac_files
 do
   test -f "$ac_file" || continue
   case $ac_file in
     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
 	;;
-    conftest.$ac_ext )
-	# This is the source file.
-	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
 	# certainly right.
@@ -2472,13 +2495,103 @@ echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
 GCC=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
 echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
 echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2520,10 +2633,14 @@ else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cc_g=no
 fi
 rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
 echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
 echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
 if test "$ac_test_CFLAGS" = set; then
@@ -3202,10 +3319,10 @@ fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
@@ -3232,9 +3349,9 @@ esac
 
 
 
-echo "$as_me:$LINENO: checking for grep that handles long lines" >&5
-echo $ECHO_N "checking for grep that handles long lines... $ECHO_C" >&6
-if test "${oc_cv_path_GREP+set}" = set; then
+echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6
+if test "${ac_cv_path_GREP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   # Extract the first word of "grep ggrep" to use in msg output
@@ -3264,9 +3381,11 @@ $debug ||
    echo "$me: cannot create a temporary directory in $TMPDIR" >&2
    { (exit 1); exit 1; }
 }
+ac_path_GREP_found=false
 # Loop through the user's path and test for each of PROGNAME-LIST
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+as_dummy="$PATH:/usr/xpg4/bin"
+for as_dir in $as_dummy
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
@@ -3274,16 +3393,12 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
     ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
     test -f "$ac_path_GREP" || continue
-    if $as_executable_p "$ac_path_GREP"; then
+    $ac_path_GREP_found || if $as_executable_p "$ac_path_GREP"; then
   # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 if "$ac_path_GREP" --version 2>&1 < /dev/null | grep 'GNU' >/dev/null; then
-  ac_cv_path_GREP="$ac_path_GREP"
-    break 2
-
-fi
-
-
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:
+else
   ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >"$tmp/conftest.in"
   while :
@@ -3292,21 +3407,25 @@ fi
     mv "$tmp/conftest.tmp" "$tmp/conftest.in"
     cp "$tmp/conftest.in" "$tmp/conftest.nl"
     echo 'GREP' >> "$tmp/conftest.nl"
-    "$ac_path_GREP" 'GREP$' < "$tmp/conftest.nl" >"$tmp/conftest.out" || break
-   diff "$tmp/conftest.out" "$tmp/conftest.nl" >/dev/null 2>&1 || break
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "$tmp/conftest.nl" >"$tmp/conftest.out" 2>/dev/null || break
+    diff "$tmp/conftest.out" "$tmp/conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_max-0}; then
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
       # Best one so far, save it but keep looking for a better one
       ac_cv_path_GREP="$ac_path_GREP"
-      ac_max=$ac_count
+      ac_path_GREP_max=$ac_count
     fi
     # 10*(2^10) chars as input seems more than enough
     test $ac_count -gt 10 && break
   done
 fi
 
+fi
+
+    $ac_path_GREP_found && break 3
   done
 done
+
 done
 
 rm -rf "$tmp"
@@ -3315,8 +3434,8 @@ fi
 
 GREP="$ac_cv_path_GREP"
 if test -z "$GREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH:/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH:/usr/xpg4/bin" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -3324,8 +3443,8 @@ fi
 
 
 fi
-echo "$as_me:$LINENO: result: $oc_cv_path_GREP" >&5
-echo "${ECHO_T}$oc_cv_path_GREP" >&6
+echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+echo "${ECHO_T}$ac_cv_path_GREP" >&6
  GREP="$ac_cv_path_GREP"
 
 
@@ -3364,9 +3483,11 @@ $debug ||
    echo "$me: cannot create a temporary directory in $TMPDIR" >&2
    { (exit 1); exit 1; }
 }
+ac_path_EGREP_found=false
 # Loop through the user's path and test for each of PROGNAME-LIST
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+as_dummy="$PATH:/usr/xpg4/bin"
+for as_dir in $as_dummy
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
@@ -3374,16 +3495,12 @@ do
   for ac_exec_ext in '' $ac_executable_extensions; do
     ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
     test -f "$ac_path_EGREP" || continue
-    if $as_executable_p "$ac_path_EGREP"; then
+    $ac_path_EGREP_found || if $as_executable_p "$ac_path_EGREP"; then
   # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 if "$ac_path_EGREP" --version 2>&1 < /dev/null | grep 'GNU' >/dev/null; then
-  ac_cv_path_EGREP="$ac_path_EGREP"
-    break 2
-
-fi
-
-
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:
+else
   ac_count=0
   echo $ECHO_N "0123456789$ECHO_C" >"$tmp/conftest.in"
   while :
@@ -3392,21 +3509,25 @@ fi
     mv "$tmp/conftest.tmp" "$tmp/conftest.in"
     cp "$tmp/conftest.in" "$tmp/conftest.nl"
     echo 'EGREP' >> "$tmp/conftest.nl"
-    "$ac_path_EGREP" 'EGREP$' < "$tmp/conftest.nl" >"$tmp/conftest.out" || break
-   diff "$tmp/conftest.out" "$tmp/conftest.nl" >/dev/null 2>&1 || break
+    "$ac_path_EGREP" 'EGREP$' < "$tmp/conftest.nl" >"$tmp/conftest.out" 2>/dev/null || break
+    diff "$tmp/conftest.out" "$tmp/conftest.nl" >/dev/null 2>&1 || break
     ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_max-0}; then
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
       # Best one so far, save it but keep looking for a better one
       ac_cv_path_EGREP="$ac_path_EGREP"
-      ac_max=$ac_count
+      ac_path_EGREP_max=$ac_count
     fi
     # 10*(2^10) chars as input seems more than enough
     test $ac_count -gt 10 && break
   done
 fi
 
+fi
+
+    $ac_path_EGREP_found && break 3
   done
 done
+
 done
 
 rm -rf "$tmp"
@@ -3415,8 +3536,8 @@ fi
 
 EGREP="$ac_cv_path_EGREP"
 if test -z "$EGREP"; then
-  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5
-echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;}
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH:/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH:/usr/xpg4/bin" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -3539,6 +3660,7 @@ cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ctype.h>
+#include <stdlib.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -3558,7 +3680,7 @@ main ()
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
 	|| toupper (i) != TOUPPER (i))
-      exit(2);
+      exit (2);
   exit (0);
 }
 _ACEOF
@@ -4267,8 +4389,8 @@ cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
-long longval () { return (long int) (sizeof (int)); }
-unsigned long ulongval () { return (long int) (sizeof (int)); }
+long int longval () { return (long int) (sizeof (int)); }
+unsigned long int ulongval () { return (long int) (sizeof (int)); }
 #include <stdio.h>
 #include <stdlib.h>
 int
@@ -4280,14 +4402,14 @@ main ()
     exit (1);
   if (((long int) (sizeof (int))) < 0)
     {
-      long i = longval ();
+      long int i = longval ();
       if (i != ((long int) (sizeof (int))))
 	exit (1);
       fprintf (f, "%ld\n", i);
     }
   else
     {
-      unsigned long i = ulongval ();
+      unsigned long int i = ulongval ();
       if (i != ((long int) (sizeof (int))))
 	exit (1);
       fprintf (f, "%lu\n", i);
@@ -4673,8 +4795,8 @@ cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 $ac_includes_default
-long longval () { return (long int) (sizeof (long)); }
-unsigned long ulongval () { return (long int) (sizeof (long)); }
+long int longval () { return (long int) (sizeof (long)); }
+unsigned long int ulongval () { return (long int) (sizeof (long)); }
 #include <stdio.h>
 #include <stdlib.h>
 int
@@ -4686,14 +4808,14 @@ main ()
     exit (1);
   if (((long int) (sizeof (long))) < 0)
     {
-      long i = longval ();
+      long int i = longval ();
       if (i != ((long int) (sizeof (long))))
 	exit (1);
       fprintf (f, "%ld\n", i);
     }
   else
     {
-      unsigned long i = ulongval ();
+      unsigned long int i = ulongval ();
       if (i != ((long int) (sizeof (long))))
 	exit (1);
       fprintf (f, "%lu\n", i);
@@ -5117,7 +5239,7 @@ main ()
   data2 = (char *) malloc (2 * pagesize);
   if (!data2)
     exit (1);
-  data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1);
+  data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1);
   if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
 		     MAP_PRIVATE | MAP_FIXED, fd, 0L))
     exit (1);
@@ -5796,10 +5918,10 @@ for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
     fi
   done
 done
-SED=$lt_cv_path_SED
 
 fi
 
+SED=$lt_cv_path_SED
 echo "$as_me:$LINENO: result: $SED" >&5
 echo "${ECHO_T}$SED" >&6
 
@@ -5925,6 +6047,15 @@ case $reload_flag in
 *) reload_flag=" $reload_flag" ;;
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
 
 echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
 echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
@@ -6011,7 +6142,7 @@ beos*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-bsdi4*)
+bsdi[45]*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
   lt_cv_file_magic_cmd='/usr/bin/file -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
@@ -6084,15 +6215,6 @@ irix5* | irix6* | nonstopux*)
 
 # This must be Linux ELF.
 linux*)
-  case $host_cpu in
-  alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*)
-    lt_cv_deplibs_check_method=pass_all ;;
-  *)
-    # glibc up to 2.1.1 does not perform some relocations on ARM
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -6115,12 +6237,10 @@ nto-qnx*)
   ;;
 
 openbsd*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
   if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
   else
-    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   fi
   ;;
 
@@ -6212,7 +6332,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 6215 "configure"' > conftest.$ac_ext
+  echo '#line 6335 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -6709,13 +6829,103 @@ echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
 GXX=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CXXFLAGS=${CXXFLAGS+set}
 ac_save_CXXFLAGS=$CXXFLAGS
-CXXFLAGS="-g"
 echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
 echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
 if test "${ac_cv_prog_cxx_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cxx_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+CXXFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -6757,10 +6967,14 @@ else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cxx_g=no
 fi
 rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
 echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
 echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
 if test "$ac_test_CXXFLAGS" = set; then
@@ -6890,7 +7104,12 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-ac_ext=cc
+
+
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cc
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -7120,13 +7339,15 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
+fi
+
 
 ac_ext=f
 ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
 ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_f77_compiler_gnu
 if test -n "$ac_tool_prefix"; then
-  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 f95 fort xlf95 ifort ifc efc pgf95 lf95 gfortran
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
@@ -7168,7 +7389,7 @@ fi
 fi
 if test -z "$F77"; then
   ac_ct_F77=$F77
-  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 f95 fort xlf95 ifort ifc efc pgf95 lf95 gfortran
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
@@ -7225,7 +7446,7 @@ fi
 
 
 # Provide some information about the compiler.
-echo "$as_me:7228:" \
+echo "$as_me:7449:" \
      "checking for Fortran 77 compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
 { (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
@@ -7415,11 +7636,25 @@ else
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
+  netbsd* | freebsd* | openbsd* | darwin* )
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    ;;
+
  *)
     # If test is not a shell built-in, we'll probably end up computing a
     # maximum length that is only half of the actual maximum length, but
     # we can't tell.
-    while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
 	       = "XX$teststring") >/dev/null 2>&1 &&
 	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
 	    lt_cv_sys_max_cmd_len=$new_result &&
@@ -7489,6 +7724,13 @@ hpux*) # Its linker distinguishes data from code symbols
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDGIRSTW]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
 irix* | nonstopux*)
   symcode='[BCDEGRST]'
   ;;
@@ -8021,6 +8263,8 @@ if test -n "$RANLIB"; then
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+
 # Only perform the check for file, if the check method requires it
 case $deplibs_check_method in
 file_magic*)
@@ -8292,11 +8536,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8295: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8539: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8299: \$? = $ac_status" >&5
+   echo "$as_me:8543: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -8403,6 +8647,16 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case "$cc_basename" in
+         xlc*)
+         lt_prog_compiler_pic='-qnocommon'
+         lt_prog_compiler_wl='-Wl,'
+         ;;
+       esac
+       ;;
 
     mingw* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -8525,11 +8779,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8528: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8782: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8532: \$? = $ac_status" >&5
+   echo "$as_me:8786: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -8585,11 +8839,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8588: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8842: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8592: \$? = $ac_status" >&5
+   echo "$as_me:8846: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -9089,7 +9343,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec=-rdynamic
       ;;
 
@@ -9115,52 +9369,52 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     darwin* | rhapsody*)
-    if test "$GXX" = yes ; then
-      archive_cmds_need_lc=no
       case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-	;;
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc=no
       hardcode_direct=no
       hardcode_automatic=yes
       hardcode_shlibpath_var=unsupported
-      whole_archive_flag_spec='-all_load $convenience'
+      whole_archive_flag_spec=''
       link_all_deplibs=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
     else
-      ld_shlibs=no
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs=no
+          ;;
+      esac
     fi
       ;;
 
@@ -9305,6 +9559,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec='${wl}-E'
       else
@@ -9656,7 +9911,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -9980,7 +10235,7 @@ nto-qnx*)
 openbsd*)
   version_type=sunos
   need_lib_prefix=no
-  need_version=yes
+  need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -10102,8 +10357,8 @@ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var " || \
-   test "X$hardcode_automatic"="Xyes" ; then
+   test -n "$runpath_var" || \
+   test "X$hardcode_automatic" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$hardcode_direct" != no &&
@@ -10769,7 +11024,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 10772 "configure"
+#line 11027 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10867,7 +11122,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 10870 "configure"
+#line 11125 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10996,43 +11251,6 @@ aix4* | aix5*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
-  ;;
-  darwin* | rhapsody*)
-  if test "$GCC" = yes; then
-    archive_cmds_need_lc=no
-    case "$host_os" in
-    rhapsody* | darwin1.[012])
-      allow_undefined_flag='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-      ;;
-    esac
-    output_verbose_link_cmd='echo'
-    archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
-    module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-    archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    hardcode_direct=no
-    hardcode_automatic=yes
-    hardcode_shlibpath_var=unsupported
-    whole_archive_flag_spec='-all_load $convenience'
-    link_all_deplibs=yes
-  else
-    ld_shlibs=no
-  fi
     ;;
 esac
 echo "$as_me:$LINENO: result: $enable_shared" >&5
@@ -11177,7 +11395,7 @@ Xsed="$SED -e s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 # The names of the tagged configurations supported by this script.
 available_tags=
@@ -11578,7 +11796,9 @@ echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
 
       case $tagname in
       CXX)
-	if test -n "$CXX" && test "X$CXX" != "Xno"; then
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
 	  ac_ext=cc
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -12053,6 +12273,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     esac
     ;;
 
+
   cygwin* | mingw* | pw32*)
     # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
     # as there is no search path for DLLs.
@@ -12076,57 +12297,68 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs_CXX=no
     fi
   ;;
+      darwin* | rhapsody*)
+        case "$host_os" in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      archive_cmds_need_lc_CXX=no
+      hardcode_direct_CXX=no
+      hardcode_automatic_CXX=yes
+      hardcode_shlibpath_var_CXX=unsupported
+      whole_archive_flag_spec_CXX=''
+      link_all_deplibs_CXX=yes
 
-  darwin* | rhapsody*)
-  if test "$GXX" = yes; then
-    archive_cmds_need_lc_CXX=no
-    case "$host_os" in
-    rhapsody* | darwin1.[012])
-      allow_undefined_flag_CXX='-undefined suppress'
-      ;;
-    *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag_CXX='-flat_namespace -undefined suppress'
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
       else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag_CXX='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag_CXX='-undefined dynamic_lookup'
-            ;;
-        esac
+          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_CXX=no
+          ;;
+      esac
       fi
-      ;;
-    esac
-    lt_int_apple_cc_single_mod=no
-    output_verbose_link_cmd='echo'
-    if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-      lt_int_apple_cc_single_mod=yes
-    fi
-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-      archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    else
-      archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    fi
-    module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-
-    # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-    if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-      archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    else
-      archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    hardcode_direct_CXX=no
-    hardcode_automatic_CXX=yes
-    hardcode_shlibpath_var_CXX=unsupported
-    whole_archive_flag_spec_CXX='-all_load $convenience'
-    link_all_deplibs_CXX=yes
-  else
-    ld_shlibs_CXX=no
-  fi
-    ;;
+        ;;
 
   dgux*)
     case $cc_basename in
@@ -12332,9 +12564,20 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       icpc)
 	# Intel C++
 	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+  	  archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	archive_expsym_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
 	archive_cmds_need_lc_CXX=no
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
@@ -12391,6 +12634,22 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
     # Workaround some broken pre-1.5 toolchains
     output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
     ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    ld_shlibs_CXX=no
+    ;;
+  openbsd*)
+    hardcode_direct_CXX=yes
+    hardcode_shlibpath_var_CXX=no
+    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      export_dynamic_flag_spec_CXX='${wl}-E'
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
   osf3*)
     case $cc_basename in
       KCC)
@@ -12846,6 +13105,16 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	  ;;
 	esac
 	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case "$cc_basename" in
+           xlc*)
+           lt_prog_compiler_pic_CXX='-qnocommon'
+           lt_prog_compiler_wl_CXX='-Wl,'
+           ;;
+         esac
+       ;;
       dgux*)
 	case $cc_basename in
 	  ec++)
@@ -13046,11 +13315,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13049: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:13318: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:13053: \$? = $ac_status" >&5
+   echo "$as_me:13322: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -13106,11 +13375,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13109: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:13378: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:13113: \$? = $ac_status" >&5
+   echo "$as_me:13382: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -13354,7 +13623,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -13678,7 +13947,7 @@ nto-qnx*)
 openbsd*)
   version_type=sunos
   need_lib_prefix=no
-  need_version=yes
+  need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -13800,8 +14069,8 @@ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action_CXX=
 if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var CXX" || \
-   test "X$hardcode_automatic_CXX"="Xyes" ; then
+   test -n "$runpath_var_CXX" || \
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$hardcode_direct_CXX" != no &&
@@ -14467,7 +14736,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 14470 "configure"
+#line 14739 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -14565,7 +14834,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 14568 "configure"
+#line 14837 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -15270,6 +15539,16 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case "$cc_basename" in
+         xlc*)
+         lt_prog_compiler_pic_F77='-qnocommon'
+         lt_prog_compiler_wl_F77='-Wl,'
+         ;;
+       esac
+       ;;
 
     mingw* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -15392,11 +15671,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15395: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:15674: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:15399: \$? = $ac_status" >&5
+   echo "$as_me:15678: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -15452,11 +15731,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15455: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:15734: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:15459: \$? = $ac_status" >&5
+   echo "$as_me:15738: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -15936,7 +16215,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs_F77=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec_F77=-rdynamic
       ;;
 
@@ -15962,52 +16241,52 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     darwin* | rhapsody*)
-    if test "$GXX" = yes ; then
-      archive_cmds_need_lc_F77=no
       case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag_F77='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag_F77='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag_F77='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag_F77='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-	;;
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc_F77=no
       hardcode_direct_F77=no
       hardcode_automatic_F77=yes
       hardcode_shlibpath_var_F77=unsupported
-      whole_archive_flag_spec_F77='-all_load $convenience'
+      whole_archive_flag_spec_F77=''
       link_all_deplibs_F77=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
     else
-      ld_shlibs_F77=no
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_F77=no
+          ;;
+      esac
     fi
       ;;
 
@@ -16152,6 +16431,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var_F77=no
       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec_F77='${wl}-E'
       else
@@ -16503,7 +16783,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -16827,7 +17107,7 @@ nto-qnx*)
 openbsd*)
   version_type=sunos
   need_lib_prefix=no
-  need_version=yes
+  need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -16949,8 +17229,8 @@ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action_F77=
 if test -n "$hardcode_libdir_flag_spec_F77" || \
-   test -n "$runpath_var F77" || \
-   test "X$hardcode_automatic_F77"="Xyes" ; then
+   test -n "$runpath_var_F77" || \
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$hardcode_direct_F77" != no &&
@@ -17485,11 +17765,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17488: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:17768: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:17492: \$? = $ac_status" >&5
+   echo "$as_me:17772: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -17596,6 +17876,16 @@ echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
 	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
       fi
       ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case "$cc_basename" in
+         xlc*)
+         lt_prog_compiler_pic_GCJ='-qnocommon'
+         lt_prog_compiler_wl_GCJ='-Wl,'
+         ;;
+       esac
+       ;;
 
     mingw* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
@@ -17718,11 +18008,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17721: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:18011: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:17725: \$? = $ac_status" >&5
+   echo "$as_me:18015: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -17778,11 +18068,11 @@ else
    -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17781: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:18071: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:17785: \$? = $ac_status" >&5
+   echo "$as_me:18075: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -18282,7 +18572,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ld_shlibs_GCJ=no
       ;;
 
-    bsdi4*)
+    bsdi[45]*)
       export_dynamic_flag_spec_GCJ=-rdynamic
       ;;
 
@@ -18308,52 +18598,52 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     darwin* | rhapsody*)
-    if test "$GXX" = yes ; then
-      archive_cmds_need_lc_GCJ=no
       case "$host_os" in
-      rhapsody* | darwin1.[012])
-	allow_undefined_flag_GCJ='-undefined suppress'
-	;;
-      *) # Darwin 1.3 on
-      if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-      	allow_undefined_flag_GCJ='-flat_namespace -undefined suppress'
-      else
-        case ${MACOSX_DEPLOYMENT_TARGET} in
-          10.[012])
-            allow_undefined_flag_GCJ='-flat_namespace -undefined suppress'
-            ;;
-          10.*)
-            allow_undefined_flag_GCJ='-undefined dynamic_lookup'
-            ;;
-        esac
-      fi
-	;;
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
       esac
-    	lt_int_apple_cc_single_mod=no
-    	output_verbose_link_cmd='echo'
-    	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
-    	  lt_int_apple_cc_single_mod=yes
-    	fi
-    	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-    	  archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-    	else
-        archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      fi
-      module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
-        if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-          archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        else
-          archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-        fi
-          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      archive_cmds_need_lc_GCJ=no
       hardcode_direct_GCJ=no
       hardcode_automatic_GCJ=yes
       hardcode_shlibpath_var_GCJ=unsupported
-      whole_archive_flag_spec_GCJ='-all_load $convenience'
+      whole_archive_flag_spec_GCJ=''
       link_all_deplibs_GCJ=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
     else
-      ld_shlibs_GCJ=no
+      case "$cc_basename" in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_GCJ=no
+          ;;
+      esac
     fi
       ;;
 
@@ -18498,6 +18788,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var_GCJ=no
       if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
 	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
 	export_dynamic_flag_spec_GCJ='${wl}-E'
       else
@@ -18849,7 +19140,7 @@ beos*)
   shlibpath_var=LIBRARY_PATH
   ;;
 
-bsdi4*)
+bsdi[45]*)
   version_type=linux
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -19173,7 +19464,7 @@ nto-qnx*)
 openbsd*)
   version_type=sunos
   need_lib_prefix=no
-  need_version=yes
+  need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
@@ -19295,8 +19586,8 @@ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
 echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
 hardcode_action_GCJ=
 if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var GCJ" || \
-   test "X$hardcode_automatic_GCJ"="Xyes" ; then
+   test -n "$runpath_var_GCJ" || \
+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
 
   # We can hardcode non-existant directories.
   if test "$hardcode_direct_GCJ" != no &&
@@ -19962,7 +20253,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 19965 "configure"
+#line 20256 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -20060,7 +20351,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 20063 "configure"
+#line 20354 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -21219,9 +21510,11 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  setopt NO_GLOB_SUBST
+elif test -n "${BASH_VERSION+set}${KSH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
   set -o posix
 fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
 
@@ -21274,13 +21567,15 @@ if test "x$as_myself" = x; then
   as_myself=$0
 fi
 if test ! -f "$as_myself"; then
-  { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute file name" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute file name" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -21294,7 +21589,7 @@ do
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
@@ -21443,7 +21738,7 @@ _ASBOX
 cat >&5 <<_CSEOF
 
 This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59a.  Invocation command line was
+generated by GNU Autoconf 2.59b.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -21503,7 +21798,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
 config.status
-configured by $0, generated by GNU Autoconf 2.59a,
+configured by $0, generated by GNU Autoconf 2.59b,
   with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
 
 Copyright (C) 2004 Free Software Foundation, Inc.
@@ -21862,15 +22157,15 @@ case $srcdir in
     else
        ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
     fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
     ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
+  *) # Relative name.
     ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
     ac_top_srcdir=$ac_top_builddir$srcdir ;;
 esac
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
+# Do not use `cd foo && pwd` to compute absolute names, because
 # the directories may not exist.
 case `pwd` in
 .) ac_abs_builddir="$ac_dir";;
@@ -22033,7 +22328,7 @@ echo "$as_me: creating $ac_file" >&6;}
 	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
 echo "$as_me: error: cannot find input file: $f" >&2;}
    { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
+	 # Quote $f, to prevent DOS file names from being IFS'd.
 	 echo "$f";;
       *) # Relative
 	 if test -f "$f"; then
diff --git a/builds/unix/install-sh b/builds/unix/install-sh
index 77bc381..6ebe46d 100644
--- a/builds/unix/install-sh
+++ b/builds/unix/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2004-02-15.20
+scriptversion=2004-12-17.09
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -58,9 +58,6 @@ stripprog="${STRIPPROG-strip}"
 rmprog="${RMPROG-rm}"
 mkdirprog="${MKDIRPROG-mkdir}"
 
-transformbasename=
-transform_arg=
-instcmd="$mvprog"
 chmodcmd="$chmodprog 0755"
 chowncmd=
 chgrpcmd=
@@ -70,23 +67,27 @@ mvcmd="$mvprog"
 src=
 dst=
 dir_arg=
+dstarg=
+no_target_directory=
 
-usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 -d DIRECTORIES...
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
 
-In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
-In the second, create the directory path DIR.
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
 
 Options:
--b=TRANSFORMBASENAME
--c         copy source (using $cpprog) instead of moving (using $mvprog).
+-c         (ignored)
 -d         create directories instead of installing files.
--g GROUP   $chgrp installed files to GROUP.
--m MODE    $chmod installed files to MODE.
--o USER    $chown installed files to USER.
--s         strip installed files (using $stripprog).
--t=TRANSFORM
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
 --help     display this help and exit.
 --version  display version info and exit.
 
@@ -96,12 +97,7 @@ Environment variables override the default commands:
 
 while test -n "$1"; do
   case $1 in
-    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-        shift
-        continue;;
-
-    -c) instcmd=$cpprog
-        shift
+    -c) shift
         continue;;
 
     -d) dir_arg=true
@@ -129,14 +125,20 @@ while test -n "$1"; do
         shift
         continue;;
 
-    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
-        shift
-        continue;;
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
 
     --version) echo "$0 $scriptversion"; exit 0;;
 
     *)  # When -d is used, all remaining arguments are directories to create.
-	test -n "$dir_arg" && break
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
         # Otherwise, the last argument is the destination.  Remove it from $@.
 	for arg
 	do
@@ -174,13 +176,13 @@ do
     src=
 
     if test -d "$dst"; then
-      instcmd=:
+      mkdircmd=:
       chmodcmd=
     else
-      instcmd=$mkdirprog
+      mkdircmd=$mkdirprog
     fi
   else
-    # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
     if test ! -f "$src" && test ! -d "$src"; then
@@ -202,12 +204,16 @@ do
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
       dst=$dst/`basename "$src"`
     fi
   fi
 
   # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
 
   # Make sure that the destination directory exists.
 
@@ -220,7 +226,8 @@ do
     oIFS=$IFS
     # Some sh's can't handle IFS=/ for some reason.
     IFS='%'
-    set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
     IFS=$oIFS
 
     pathcomp=
@@ -229,83 +236,83 @@ do
       pathcomp=$pathcomp$1
       shift
       if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp" || lasterr=$?
+        $mkdirprog "$pathcomp"
 	# mkdir can fail with a `File exist' error in case several
 	# install-sh are creating the directory concurrently.  This
 	# is OK.
-	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+	test -d "$pathcomp" || exit
       fi
       pathcomp=$pathcomp/
     done
   fi
 
   if test -n "$dir_arg"; then
-    $doit $instcmd "$dst" \
+    $doit $mkdircmd "$dst" \
       && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
       && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
       && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
 
   else
-    # If we're going to rename the final executable, determine the name now.
-    if test -z "$transformarg"; then
-      dstfile=`basename "$dst"`
-    else
-      dstfile=`basename "$dst" $transformbasename \
-               | sed $transformarg`$transformbasename
-    fi
-
-    # don't allow the sed command to completely eliminate the filename.
-    test -z "$dstfile" && dstfile=`basename "$dst"`
+    dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
     rmtmp=$dstdir/_rm.$$_
 
     # Trap to clean up those temp files at exit.
-    trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
     trap '(exit $?); exit' 1 2 13 15
 
-    # Move or copy the file name to the temp name
-    $doit $instcmd "$src" "$dsttmp" &&
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
     # If any of these fail, we abort the whole thing.  If we want to
     # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $instcmd $src $dsttmp" command.
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
     { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
       && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
       && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
 
-    # Now remove or move aside any old file at destination location.  We
-    # try this two ways since rm can't unlink itself on some systems and
-    # the destination file might be busy for other reasons.  In this case,
-    # the final cleanup might fail but the new file should still install
-    # successfully.
-    {
-      if test -f "$dstdir/$dstfile"; then
-        $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-        || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-        || {
-	  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-	  (exit 1); exit
-        }
-      else
-        :
-      fi
-    } &&
-
     # Now rename the file to the real destination.
-    $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-  fi || { (exit 1); exit; }
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
 done
 
 # The final little trick to "correctly" pass the exit status to the exit trap.
 {
-  (exit 0); exit
+  (exit 0); exit 0
 }
 
 # Local variables:
diff --git a/builds/unix/ltmain.sh b/builds/unix/ltmain.sh
index 70f0b2d..761e1fd 100644
--- a/builds/unix/ltmain.sh
+++ b/builds/unix/ltmain.sh
@@ -43,9 +43,14 @@ EXIT_FAILURE=1
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.5.6
-TIMESTAMP=" (1.1220.2.94 2004/04/10 16:27:27)"
+VERSION=1.5.10
+TIMESTAMP=" (1.1220.2.130 2004/09/19 12:13:49)"
 
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+  setopt NO_GLOB_SUBST
+fi
 
 # Check that we have a working $echo.
 if test "X$1" = X--no-reexec; then
@@ -235,6 +240,122 @@ func_infer_tag () {
       esac
     fi
 }
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives () {
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xdir="$my_gentop/$my_xlib"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      status=$?
+      if test "$status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $status
+      fi
+      case $host in
+      *-darwin*)
+	$show "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	if test -z "$run"; then
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename $darwin_archive`
+	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  if test -n "$darwin_arches"; then 
+	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      # Remove the table of contents from the thin files.
+	      $AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF 2>/dev/null || true
+	      $AR -d "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" __.SYMDEF\ SORTED 2>/dev/null || true
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $AR -xo "${darwin_base_archive}"
+	      rm "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	    done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f | xargs basename | sort -u | $NL2SP`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      lipo -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    rm -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    (cd $my_xdir && $AR x $my_xabs) || exit $?
+	  fi # $darwin_arches
+	fi # $run
+      ;;
+      *)
+	# We will extract separately just the conflicting names and we will
+	# no longer touch any unique names. It is faster to leave these
+	# extract automatically by $AR in one run.
+	$show "(cd $my_xdir && $AR x $my_xabs)"
+	$run eval "(cd \$my_xdir && $AR x \$my_xabs)" || exit $?
+	if ($AR t "$my_xabs" | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+	  $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+	  $AR t "$my_xabs" | sort | uniq -cd | while read -r count name
+	  do
+	    i=1
+	    while test "$i" -le "$count"
+	    do
+	      # Put our $i before any first dot (extension)
+	      # Never overwrite any file
+	      name_to="$name"
+	      while test "X$name_to" = "X$name" || test -f "$my_xdir/$name_to"
+	      do
+		name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+	      done
+	      $show "(cd $my_xdir && $AR xN $i $my_xabs '$name' && $mv '$name' '$name_to')"
+	      $run eval "(cd \$my_xdir && $AR xN $i \$my_xabs '$name' && $mv '$name' '$name_to')" || exit $?
+	      i=`expr $i + 1`
+	    done
+	  done
+	fi
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
 # End of Shell function definitions
 #####################################
 
@@ -1978,7 +2099,22 @@ EOF
 	  fi
 	  case $linkmode in
 	  lib)
-	    if test "$deplibs_check_method" != pass_all; then
+	    valid_a_lib=no
+	    case $deplibs_check_method in
+	      match_pattern*)
+		set dummy $deplibs_check_method
+	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+		if eval $echo \"$deplib\" 2>/dev/null \
+		    | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		  valid_a_lib=yes
+		fi
+		;;
+	      pass_all)
+		valid_a_lib=yes
+		;;
+            esac
+	    if test "$valid_a_lib" != yes; then
 	      $echo
 	      $echo "*** Warning: Trying to link with static lib archive $deplib."
 	      $echo "*** I have the capability to make that library automatically link in when"
@@ -2151,10 +2287,17 @@ EOF
 	    absdir="$libdir"
 	  fi
 	else
-	  dir="$ladir/$objdir"
-	  absdir="$abs_ladir/$objdir"
-	  # Remove this search path later
-	  notinst_path="$notinst_path $abs_ladir"
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
 	fi # $installed = yes
 	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
 
@@ -2987,7 +3130,7 @@ EOF
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
 	  minor_current=`expr $current + 1`
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  ;;
 
 	freebsd-aout)
@@ -3675,67 +3818,13 @@ EOF
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	  else
 	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
 	    generated="$generated $gentop"
 
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case $xlib in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "$mkdir $xdir"
-	      $run $mkdir "$xdir"
-	      status=$?
-	      if test "$status" -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      # We will extract separately just the conflicting names and we will no
-	      # longer touch any unique names. It is faster to leave these extract
-	      # automatically by $AR in one run.
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	      if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-		:
-	      else
-		$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-		$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-		$AR t "$xabs" | sort | uniq -cd | while read -r count name
-		do
-		  i=1
-		  while test "$i" -le "$count"
-		  do
-		   # Put our $i before any first dot (extension)
-		   # Never overwrite any file
-		   name_to="$name"
-		   while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-		   do
-		     name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-		   done
-		   $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-		   $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-		   i=`expr $i + 1`
-		  done
-		done
-	      fi
-
-	      libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	    done
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
 	  fi
 	fi
-
+	
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
@@ -3973,64 +4062,10 @@ EOF
 	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
 	else
 	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "$mkdir $gentop"
-	  $run $mkdir "$gentop"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
 	  generated="$generated $gentop"
 
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case $xlib in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "$mkdir $xdir"
-	    $run $mkdir "$xdir"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    # We will extract separately just the conflicting names and we will no
-	    # longer touch any unique names. It is faster to leave these extract
-	    # automatically by $AR in one run.
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	    if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-	      :
-	    else
-	      $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-	      $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-	      $AR t "$xabs" | sort | uniq -cd | while read -r count name
-	      do
-		i=1
-		while test "$i" -le "$count"
-		do
-		 # Put our $i before any first dot (extension)
-		 # Never overwrite any file
-		 name_to="$name"
-		 while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-		 do
-		   name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-		 done
-		 $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-		 $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-		 i=`expr $i + 1`
-		done
-	      done
-	    fi
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	  done
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
       fi
 
@@ -4811,7 +4846,7 @@ sed_quote_subst='$sed_quote_subst'
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 relink_command=\"$relink_command\"
 
@@ -4988,65 +5023,10 @@ fi\
 
       if test -n "$addlibs"; then
 	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "$mkdir $gentop"
-	$run $mkdir "$gentop"
-	status=$?
-	if test "$status" -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
 	generated="$generated $gentop"
 
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case $xlib in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "$mkdir $xdir"
-	  $run $mkdir "$xdir"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  # We will extract separately just the conflicting names and we will no
-	  # longer touch any unique names. It is faster to leave these extract
-	  # automatically by $AR in one run.
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	  if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-	    :
-	  else
-	    $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-	    $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-	    $AR t "$xabs" | sort | uniq -cd | while read -r count name
-	    do
-	      i=1
-	      while test "$i" -le "$count"
-	      do
-	       # Put our $i before any first dot (extension)
-	       # Never overwrite any file
-	       name_to="$name"
-	       while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-	       do
-		 name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-	       done
-	       $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-	       $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-	       i=`expr $i + 1`
-	      done
-	    done
-	  fi
-
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.