kc3-lang/freetype/src/cff/t2gload.c

• Show log

  Commit

• Hash : eadc8df2
  Author :
  Date : 2000-10-11T05:52:42
  

  A fix from Tom to fix the last=first point problem if it is a control point.

Download

• src/cff/t2gload.c

• /***************************************************************************/
  /*                                                                         */
  /*  t2gload.c                                                              */
  /*                                                                         */
  /*    OpenType Glyph Loader (body).                                        */
  /*                                                                         */
  /*  Copyright 1996-2000 by                                                 */
  /*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
  /*                                                                         */
  /*  This file is part of the FreeType project, and may only be used,       */
  /*  modified, and distributed under the terms of the FreeType project      */
  /*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
  /*  this file you indicate that you have read the license and              */
  /*  understand and accept it fully.                                        */
  /*                                                                         */
  /***************************************************************************/
  
  
  #include <freetype/internal/ftdebug.h>
  #include <freetype/internal/ftcalc.h>
  #include <freetype/internal/ftstream.h>
  #include <freetype/internal/sfnt.h>
  #include <freetype/ftoutln.h>
  #include <freetype/tttags.h>
  
  
  #ifdef FT_FLAT_COMPILE
  
  #include "t2load.h"
  #include "t2gload.h"
  
  #else
  
  #include <cff/t2load.h>
  #include <cff/t2gload.h>
  
  #endif
  
  
  #include <freetype/internal/t2errors.h>
  
  
    /*************************************************************************/
    /*                                                                       */
    /* The macro FT_COMPONENT is used in trace mode.  It is an implicit      */
    /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log  */
    /* messages during execution.                                            */
    /*                                                                       */
  #undef  FT_COMPONENT
  #define FT_COMPONENT  trace_t2gload
  
  
    typedef enum  T2_Operator_
    {
      t2_op_unknown = 0,
  
      t2_op_rmoveto,
      t2_op_hmoveto,
      t2_op_vmoveto,
  
      t2_op_rlineto,
      t2_op_hlineto,
      t2_op_vlineto,
  
      t2_op_rrcurveto,
      t2_op_hhcurveto,
      t2_op_hvcurveto,
      t2_op_rcurveline,
      t2_op_rlinecurve,
      t2_op_vhcurveto,
      t2_op_vvcurveto,
  
      t2_op_flex,
      t2_op_hflex,
      t2_op_hflex1,
      t2_op_flex1,
  
      t2_op_endchar,
  
      t2_op_hstem,
      t2_op_vstem,
      t2_op_hstemhm,
      t2_op_vstemhm,
  
      t2_op_hintmask,
      t2_op_cntrmask,
  
      t2_op_abs,
      t2_op_add,
      t2_op_sub,
      t2_op_div,
      t2_op_neg,
      t2_op_random,
      t2_op_mul,
      t2_op_sqrt,
  
      t2_op_blend,
  
      t2_op_drop,
      t2_op_exch,
      t2_op_index,
      t2_op_roll,
      t2_op_dup,
  
      t2_op_put,
      t2_op_get,
      t2_op_store,
      t2_op_load,
  
      t2_op_and,
      t2_op_or,
      t2_op_not,
      t2_op_eq,
      t2_op_ifelse,
  
      t2_op_callsubr,
      t2_op_callgsubr,
      t2_op_return,
  
      /* do not remove */
      t2_op_max
  
    } T2_Operator;
  
  
  #define T2_COUNT_CHECK_WIDTH  0x80
  #define T2_COUNT_EXACT        0x40
  #define T2_COUNT_CLEAR_STACK  0x20
  
  
    static const FT_Byte  t2_argument_counts[] =
    {
      0,  /* unknown */
  
      2 | T2_COUNT_CHECK_WIDTH | T2_COUNT_EXACT, /* rmoveto */
      1 | T2_COUNT_CHECK_WIDTH | T2_COUNT_EXACT,
      1 | T2_COUNT_CHECK_WIDTH | T2_COUNT_EXACT,
  
      0 | T2_COUNT_CLEAR_STACK,  /* rlineto */
      0 | T2_COUNT_CLEAR_STACK,
      0 | T2_COUNT_CLEAR_STACK,
  
      0 | T2_COUNT_CLEAR_STACK,  /* rrcurveto */
      0 | T2_COUNT_CLEAR_STACK,
      0 | T2_COUNT_CLEAR_STACK,
      0 | T2_COUNT_CLEAR_STACK,
      0 | T2_COUNT_CLEAR_STACK,
      0 | T2_COUNT_CLEAR_STACK,
      0 | T2_COUNT_CLEAR_STACK,
  
      13, /* flex */
      7,
      9,
      11,
  
      0, /* endchar */
  
      2 | T2_COUNT_CHECK_WIDTH, /* hstem */
      2 | T2_COUNT_CHECK_WIDTH,
      2 | T2_COUNT_CHECK_WIDTH,
      2 | T2_COUNT_CHECK_WIDTH,
  
      0, /* hintmask */
      0, /* cntrmask */
  
      1, /* abs */
      2,
      2,
      2,
      1,
      0,
      2,
      1,
  
      1, /* blend */
  
      1, /* drop */
      2,
      1,
      2,
      1,
  
      2, /* put */
      1,
      4,
      3,
  
      2, /* and */
      2,
      1,
      2,
      4,
  
      1, /* callsubr */
      1,
      0
    };
  
  
    /*************************************************************************/
    /*************************************************************************/
    /*************************************************************************/
    /**********                                                      *********/
    /**********                                                      *********/
    /**********             GENERIC CHARSTRING PARSING               *********/
    /**********                                                      *********/
    /**********                                                      *********/
    /*************************************************************************/
    /*************************************************************************/
    /*************************************************************************/
  
  
    /*************************************************************************/
    /*                                                                       */
    /* <Function>                                                            */
    /*    T2_Init_Builder                                                    */
    /*                                                                       */
    /* <Description>                                                         */
    /*    Initializes a given glyph builder.                                 */
    /*                                                                       */
    /* <InOut>                                                               */
    /*    builder :: A pointer to the glyph builder to initialize.           */
    /*                                                                       */
    /* <Input>                                                               */
    /*    face    :: The current face object.                                */
    /*                                                                       */
    /*    size    :: The current size object.                                */
    /*                                                                       */
    /*    glyph   :: The current glyph object.                               */
    /*                                                                       */
    static
    void  T2_Init_Builder( T2_Builder*   builder,
                           TT_Face       face,
                           T2_Size       size,
                           T2_GlyphSlot  glyph )
    {
      builder->path_begun  = 0;
      builder->load_points = 1;
  
      builder->face   = face;
      builder->glyph  = glyph;
      builder->memory = face->root.memory;
  
      if ( glyph )
      {
        FT_GlyphLoader*  loader = glyph->root.loader;
  
  
        builder->loader  = loader;
        builder->base    = &loader->base.outline;
        builder->current = &loader->current.outline;
        FT_GlyphLoader_Rewind( loader );
      }
  
      if ( size )
      {
        builder->scale_x = size->metrics.x_scale;
        builder->scale_y = size->metrics.y_scale;
      }
  
      builder->pos_x = 0;
      builder->pos_y = 0;
  
      builder->left_bearing.x = 0;
      builder->left_bearing.y = 0;
      builder->advance.x      = 0;
      builder->advance.y      = 0;
    }
  
  
    /*************************************************************************/
    /*                                                                       */
    /* <Function>                                                            */
    /*    T2_Done_Builder                                                    */
    /*                                                                       */
    /* <Description>                                                         */
    /*    Finalizes a given glyph builder.  Its contents can still be used   */
    /*    after the call, but the function saves important information       */
    /*    within the corresponding glyph slot.                               */
    /*                                                                       */
    /* <Input>                                                               */
    /*    builder :: A pointer to the glyph builder to finalize.             */
    /*                                                                       */
    static
    void  T2_Done_Builder( T2_Builder*  builder )
    {
      T2_GlyphSlot  glyph = builder->glyph;
  
  
      if ( glyph )
        glyph->root.outline = *builder->base;
    }
  
  
    /*************************************************************************/
    /*                                                                       */
    /* <Function>                                                            */
    /*    t2_compute_bias                                                    */
    /*                                                                       */
    /* <Description>                                                         */
    /*    Computes the bias value in dependence of the number of glyph       */
    /*    subroutines.                                                       */
    /*                                                                       */
    /* <Input>                                                               */
    /*    num_subrs :: The number of glyph subroutines.                      */
    /*                                                                       */
    /* <Return>                                                              */
    /*    The bias value.                                                    */
    static
    FT_Int  t2_compute_bias( FT_UInt  num_subrs )
    {
      FT_Int  result;
  
  
      if ( num_subrs < 1240 )
        result = 107;
      else if ( num_subrs < 33900 )
        result = 1131;
      else
        result = 32768;
  
      return result;
    }
  
  
    /*************************************************************************/
    /*                                                                       */
    /* <Function>                                                            */
    /*    T2_Init_Decoder                                                    */
    /*                                                                       */
    /* <Description>                                                         */
    /*    Initializes a given glyph decoder.                                 */
    /*                                                                       */
    /* <InOut>                                                               */
    /*    decoder :: A pointer to the glyph builder to initialize.           */
    /*                                                                       */
    /* <Input>                                                               */
    /*    face    :: The current face object.                                */
    /*                                                                       */
    /*    size    :: The current size object.                                */
    /*                                                                       */
    /*    slot    :: The current glyph object.                               */
    /*                                                                       */
    LOCAL_FUNC
    void  T2_Init_Decoder( T2_Decoder*  decoder,
                           TT_Face      face,
                           T2_Size      size,
                           T2_GlyphSlot slot )
    {
      CFF_Font*  cff = (CFF_Font*)face->extra.data;
  
  
      /* clear everything */
      MEM_Set( decoder, 0, sizeof ( *decoder ) );
  
      /* initialize builder */
      T2_Init_Builder( &decoder->builder, face, size, slot );
  
      /* initialize Type2 decoder */
      decoder->num_globals  = cff->num_global_subrs;
      decoder->globals      = cff->global_subrs;
      decoder->globals_bias = t2_compute_bias( decoder->num_globals );
    }
  
  
    /* this function is used to select the locals subrs array */
    LOCAL_DEF
    void  T2_Prepare_Decoder( T2_Decoder*  decoder,
                              FT_UInt      glyph_index )
    {
      CFF_Font*     cff = (CFF_Font*)decoder->builder.face->extra.data;
      CFF_SubFont*  sub = &cff->top_font;
  
  
      /* manage CID fonts */
      if ( cff->num_subfonts >= 1 )
      {
        FT_Byte  fd_index = CFF_Get_FD( &cff->fd_select, glyph_index );
  
  
        sub = cff->subfonts[fd_index];
      }
  
      decoder->num_locals    = sub->num_local_subrs;
      decoder->locals        = sub->local_subrs;
      decoder->locals_bias   = t2_compute_bias( decoder->num_locals );
  
      decoder->glyph_width   = sub->private_dict.default_width;
      decoder->nominal_width = sub->private_dict.nominal_width;
    }
  
  
    /* check that there is enough room for `count' more points */
    static
    FT_Error  check_points( T2_Builder*  builder,
                            FT_Int       count )
    {
      return FT_GlyphLoader_Check_Points( builder->loader, count, 0 );
    }
  
  
    /* add a new point, do not check space */
    static
    void  add_point( T2_Builder*  builder,
                     FT_Pos       x,
                     FT_Pos       y,
                     FT_Byte      flag )
    {
      FT_Outline*  outline = builder->current;
  
  
      if ( builder->load_points )
      {
        FT_Vector*  point   = outline->points + outline->n_points;
        FT_Byte*    control = (FT_Byte*)outline->tags + outline->n_points;
  
  
        point->x = x >> 16;
        point->y = y >> 16;
        *control = flag ? FT_Curve_Tag_On : FT_Curve_Tag_Cubic;
  
        builder->last = *point;
      }
      outline->n_points++;
    }
  
  
    /* check space for a new on-curve point, then add it */
    static
    FT_Error  add_point1( T2_Builder*  builder,
                          FT_Pos       x,
                          FT_Pos       y )
    {
      FT_Error  error;
  
  
      error = check_points( builder, 1 );
      if ( !error )
        add_point( builder, x, y, 1 );
  
      return error;
    }
  
  
    /* check room for a new contour, then add it */
    static
    FT_Error  add_contour( T2_Builder*  builder )
    {
      FT_Outline*  outline = builder->current;
      FT_Error     error;
  
  
      if ( !builder->load_points )
      {
        outline->n_contours++;
        return T2_Err_Ok;
      }
  
      error = FT_GlyphLoader_Check_Points( builder->loader, 0, 1 );
      if ( !error )
      {
        if ( outline->n_contours > 0 )
          outline->contours[outline->n_contours - 1] = outline->n_points - 1;
  
        outline->n_contours++;
      }
  
      return error;
    }
  
  
    /* if a path was begun, add its first on-curve point */
    static
    FT_Error  start_point( T2_Builder*  builder,
                           FT_Pos       x,
                           FT_Pos       y )
    {
      FT_Error  error = 0;
  
  
      /* test whether we are building a new contour */
      if ( !builder->path_begun )
      {
        builder->path_begun = 1;
        error = add_contour( builder );
        if ( !error )
          error = add_point1( builder, x, y );
      }
      return error;
    }
  
  
    /* close the current contour */
    static
    void  close_contour( T2_Builder*  builder )
    {
      FT_Outline*  outline = builder->current;
  
      /* XXXX: We must not include the last point in the path if it */
      /*       is located on the first point.                       */
      if ( outline->n_points > 1 )
      {
        FT_Int      first   = 0;
        FT_Vector*  p1      = outline->points + first;
        FT_Vector*  p2      = outline->points + outline->n_points - 1;
        FT_Byte*    control = (FT_Byte*)outline->tags + outline->n_points - 1;
  
  
        if ( outline->n_contours > 1 )
        {
          first = outline->contours[outline->n_contours - 2] + 1;
          p1    = outline->points + first;
        }
  
        /* `delete' last point only if it coincides with the first */
        /* point and it is not a control point (which can happen). */
        if ( p1->x == p2->x && p1->y == p2->y )
          if ( *control == FT_Curve_Tag_On )
            outline->n_points--;
      }
  
      if ( outline->n_contours > 0 )
        outline->contours[outline->n_contours - 1] = outline->n_points - 1;
    }
  
  
  #define USE_ARGS( n )  do                            \
                         {                             \
                           top -= n;                   \
                           if ( top < decoder->stack ) \
                             goto Stack_Underflow;     \
                         } while ( 0 )
  
  
    /*************************************************************************/
    /*                                                                       */
    /* <Function>                                                            */
    /*    T2_Parse_CharStrings                                               */
    /*                                                                       */
    /* <Description>                                                         */
    /*    Parses a given Type 2 charstrings program.                         */
    /*                                                                       */
    /* <InOut>                                                               */
    /*    decoder         :: The current Type 1 decoder.                     */
    /*                                                                       */
    /* <Input>                                                               */
    /*    charstring_base :: The base of the charstring stream.              */
    /*                                                                       */
    /*    charstring_len  :: The length in bytes of the charstring stream.   */
    /*                                                                       */
    /* <Return>                                                              */
    /*    FreeType error code.  0 means success.                             */
    /*                                                                       */
    LOCAL_FUNC
    FT_Error  T2_Parse_CharStrings( T2_Decoder*  decoder,
                                    FT_Byte*     charstring_base,
                                    FT_Int       charstring_len )
    {
      FT_Error          error;
      T2_Decoder_Zone*  zone;
      FT_Byte*          ip;
      FT_Byte*          limit;
      T2_Builder*       builder = &decoder->builder;
      FT_Outline*       outline;
      FT_Pos            x, y;
      FT_Fixed          seed;
      FT_Fixed*         stack;
  
  
      /* set default width */
      decoder->num_hints  = 0;
      decoder->read_width = 1;
  
      /* compute random seed from stack address of parameter */
      seed = (FT_Fixed)(char*)&seed           ^
             (FT_Fixed)(char*)&decoder        ^
             (FT_Fixed)(char*)&charstring_base;
      seed = ( seed ^ ( seed >> 10 ) ^ ( seed >> 20 ) ) & 0xFFFF;
      if ( seed == 0 )
        seed = 0x7384;
  
      /* initialize the decoder */
      decoder->top  = decoder->stack;
      decoder->zone = decoder->zones;
      zone          = decoder->zones;
      stack         = decoder->top;
  
      builder->path_begun = 0;
  
      zone->base           = charstring_base;
      limit = zone->limit  = charstring_base + charstring_len;
      ip    = zone->cursor = zone->base;
  
      error   = T2_Err_Ok;
      outline = builder->current;
  
      x = builder->pos_x;
      y = builder->pos_y;
  
      /* now, execute loop */
      while ( ip < limit )
      {
        T2_Operator  op;
        FT_Byte      v;
  
  
        /********************************************************************/
        /*                                                                  */
        /* Decode operator or operand                                       */
        /*                                                                  */
        v = *ip++;
        if ( v >= 32 || v == 28 )
        {
          FT_Int    shift = 16;
          FT_Int32  val;
  
  
          /* this is an operand, push it on the stack */
          if ( v == 28 )
          {
            if ( ip + 1 >= limit )
              goto Syntax_Error;
            val = (FT_Short)( ( (FT_Short)ip[0] << 8 ) | ip[1] );
            ip += 2;
          }
          else if ( v < 247 )
            val = (FT_Long)v - 139;
          else if ( v < 251 )
          {
            if ( ip >= limit )
              goto Syntax_Error;
            val = ( (FT_Long)v - 247 ) * 256 + *ip++ + 108;
          }
          else if ( v < 255 )
          {
            if ( ip >= limit )
              goto Syntax_Error;
            val = -( (FT_Long)v - 251 ) * 256 - *ip++ - 108;
          }
          else
          {
            if ( ip + 3 >= limit )
              goto Syntax_Error;
            val = ( (FT_Int32)ip[0] << 24 ) |
                  ( (FT_Int32)ip[1] << 16 ) |
                  ( (FT_Int32)ip[2] <<  8 ) |
                              ip[3];
            ip    += 4;
            shift  = 0;
          }
          if ( decoder->top - stack >= T2_MAX_OPERANDS )
            goto Stack_Overflow;
  
          val           <<= shift;
          *decoder->top++ = val;
  
  #ifdef FT_DEBUG_LEVEL_TRACE
          if ( !( val & 0xFFFF ) )
            FT_TRACE4(( " %d", (FT_Int32)( val >> 16 ) ));
          else
            FT_TRACE4(( " %.2f", val/65536.0 ));
  #endif
  
        }
        else
        {
          FT_Fixed*  args     = decoder->top;
          FT_Int     num_args = args - decoder->stack;
          FT_Int     req_args;
  
  
          /* find operator */
          op = t2_op_unknown;
  
          switch ( v )
          {
          case 1:
            op = t2_op_hstem;
            break;
          case 3:
            op = t2_op_vstem;
            break;
          case 4:
            op = t2_op_vmoveto;
            break;
          case 5:
            op = t2_op_rlineto;
            break;
          case 6:
            op = t2_op_hlineto;
            break;
          case 7:
            op = t2_op_vlineto;
            break;
          case 8:
            op = t2_op_rrcurveto;
            break;
          case 10:
            op = t2_op_callsubr;
            break;
          case 11:
            op = t2_op_return;
            break;
          case 12:
            {
              if ( ip >= limit )
                goto Syntax_Error;
              v = *ip++;
  
              switch ( v )
              {
              case 3:
                op = t2_op_and;
                break;
              case 4:
                op = t2_op_or;
                break;
              case 5:
                op = t2_op_not;
                break;
              case 8:
                op = t2_op_store;
                break;
              case 9:
                op = t2_op_abs;
                break;
              case 10:
                op = t2_op_add;
                break;
              case 11:
                op = t2_op_sub;
                break;
              case 12:
                op = t2_op_div;
                break;
              case 13:
                op = t2_op_load;
                break;
              case 14:
                op = t2_op_neg;
                break;
              case 15:
                op = t2_op_eq;
                break;
              case 18:
                op = t2_op_drop;
                break;
              case 20:
                op = t2_op_put;
                break;
              case 21:
                op = t2_op_get;
                break;
              case 22:
                op = t2_op_ifelse;
                break;
              case 23:
                op = t2_op_random;
                break;
              case 24:
                op = t2_op_mul;
                break;
              case 26:
                op = t2_op_sqrt;
                break;
              case 27:
                op = t2_op_dup;
                break;
              case 28:
                op = t2_op_exch;
                break;
              case 29:
                op = t2_op_index;
                break;
              case 30:
                op = t2_op_roll;
                break;
              case 34:
                op = t2_op_hflex;
                break;
              case 35:
                op = t2_op_flex;
                break;
              case 36:
                op = t2_op_hflex1;
                break;
              case 37:
                op = t2_op_flex1;
                break;
              default:
                /* decrement ip for syntax error message */
                ip--;
              }
            }
            break;
          case 14:
            op = t2_op_endchar;
            break;
          case 16:
            op = t2_op_blend;
            break;
          case 18:
            op = t2_op_hstemhm;
            break;
          case 19:
            op = t2_op_hintmask;
            break;
          case 20:
            op = t2_op_cntrmask;
            break;
          case 21:
            op = t2_op_rmoveto;
            break;
          case 22:
            op = t2_op_hmoveto;
            break;
          case 23:
            op = t2_op_vstemhm;
            break;
          case 24:
            op = t2_op_rcurveline;
            break;
          case 25:
            op = t2_op_rlinecurve;
            break;
          case 26:
            op = t2_op_vvcurveto;
            break;
          case 27:
            op = t2_op_hhcurveto;
            break;
          case 29:
            op = t2_op_callgsubr;
            break;
          case 30:
            op = t2_op_vhcurveto;
            break;
          case 31:
            op = t2_op_hvcurveto;
            break;
          default:
            ;
          }
          if ( op == t2_op_unknown )
            goto Syntax_Error;
  
          /* check arguments */
          req_args = t2_argument_counts[op];
          if ( req_args & T2_COUNT_CHECK_WIDTH )
          {
            args = stack;
            if ( num_args & 1 && decoder->read_width )
            {
              decoder->glyph_width = decoder->nominal_width +
                                       ( stack[0] >> 16 );
              num_args--;
              args++;
            }
            decoder->read_width  = 0;
            req_args = 0;
          }
  
          req_args &= 15;
          if ( num_args < req_args )
            goto Stack_Underflow;
          args     -= req_args;
          num_args -= req_args;
  
          switch ( op )
          {
          case t2_op_hstem:
          case t2_op_vstem:
          case t2_op_hstemhm:
          case t2_op_vstemhm:
            /* if the number of arguments is not even, the first one */
            /* is simply the glyph width, encoded as the difference  */
            /* to nominalWidthX                                      */
            FT_TRACE4(( op == t2_op_hstem   ? " hstem"   :
                        op == t2_op_vstem   ? " vstem"   :
                        op == t2_op_hstemhm ? " hstemhm" :
                                              " vstemhm" ));
            decoder->num_hints += num_args / 2;
            args = stack;
            break;
  
          case t2_op_hintmask:
          case t2_op_cntrmask:
            FT_TRACE4(( op == t2_op_hintmask ? " hintmask"
                                             : " cntrmask" ));
  
            decoder->num_hints += num_args / 2;
            ip += ( decoder->num_hints + 7 ) >> 3;
            if ( ip >= limit )
              goto Syntax_Error;
            args = stack;
            break;
  
          case t2_op_rmoveto:
            FT_TRACE4(( " rmoveto" ));
  
            close_contour( builder );
            builder->path_begun = 0;
            x   += args[0];
            y   += args[1];
            args = stack;
            break;
  
          case t2_op_vmoveto:
            FT_TRACE4(( " vmoveto" ));
  
            close_contour( builder );
            builder->path_begun = 0;
            y   += args[0];
            args = stack;
            break;
  
          case t2_op_hmoveto:
            FT_TRACE4(( " hmoveto" ));
  
            close_contour( builder );
            builder->path_begun = 0;
            x   += args[0];
            args = stack;
            break;
  
          case t2_op_rlineto:
            FT_TRACE4(( " rlineto" ));
  
            if ( start_point ( builder, x, y )         ||
                 check_points( builder, num_args / 2 ) )
              goto Memory_Error;
  
            if ( num_args < 2 || num_args & 1 )
              goto Stack_Underflow;
  
            args = stack;
            while ( args < decoder->top )
            {
              x += args[0];
              y += args[1];
              add_point( builder, x, y, 1 );
              args += 2;
            }
            args = stack;
            break;
  
          case t2_op_hlineto:
          case t2_op_vlineto:
            {
              FT_Int  phase = ( op == t2_op_hlineto );
  
  
              FT_TRACE4(( op == t2_op_hlineto ? " hlineto"
                                              : " vlineto" ));
  
              if ( start_point ( builder, x, y )     ||
                   check_points( builder, num_args ) )
                goto Memory_Error;
  
              args = stack;
              while (args < decoder->top )
              {
                if ( phase )
                  x += args[0];
                else
                  y += args[0];
  
                if ( add_point1( builder, x, y ) )
                  goto Memory_Error;
  
                args++;
                phase ^= 1;
              }
              args = stack;
            }
            break;
  
          case t2_op_rrcurveto:
            FT_TRACE4(( " rrcurveto" ));
  
            /* check number of arguments; must be a multiple of 6 */
            if ( num_args % 6 != 0 )
              goto Stack_Underflow;
  
            if ( start_point ( builder, x, y )         ||
                 check_points( builder, num_args / 2 ) )
              goto Memory_Error;
  
            args = stack;
            while ( args < decoder->top )
            {
              x += args[0];
              y += args[1];
              add_point( builder, x, y, 0 );
              x += args[2];
              y += args[3];
              add_point( builder, x, y, 0 );
              x += args[4];
              y += args[5];
              add_point( builder, x, y, 1 );
              args += 6;
            }
            args = stack;
            break;
  
          case t2_op_vvcurveto:
            FT_TRACE4(( " vvcurveto" ));
  
            if ( start_point ( builder, x, y ) )
              goto Memory_Error;
  
            args = stack;
            if ( num_args & 1 )
            {
              x += args[0];
              args++;
              num_args--;
            }
  
            if ( num_args % 4 != 0 )
              goto Stack_Underflow;
  
            if ( check_points( builder, 3 * ( num_args / 4 ) ) )
              goto Memory_Error;
  
            while ( args < decoder->top )
            {
              y += args[0];
              add_point( builder, x, y, 0 );
              x += args[1];
              y += args[2];
              add_point( builder, x, y, 0 );
              y += args[3];
              add_point( builder, x, y, 1 );
              args += 4;
            }
            args = stack;
            break;
  
          case t2_op_hhcurveto:
            FT_TRACE4(( " hhcurveto" ));
  
            if ( start_point ( builder, x, y ) )
              goto Memory_Error;
  
            args = stack;
            if ( num_args & 1 )
            {
              y += args[0];
              args++;
              num_args--;
            }
  
            if ( num_args % 4 != 0 )
              goto Stack_Underflow;
  
            if ( check_points( builder, 3 * ( num_args / 4 ) ) )
              goto Memory_Error;
  
            while ( args < decoder->top )
            {
              x += args[0];
              add_point( builder, x, y, 0 );
              x += args[1];
              y += args[2];
              add_point( builder, x, y, 0 );
              x += args[3];
              add_point( builder, x, y, 1 );
              args += 4;
            }
            args = stack;
            break;
  
          case t2_op_vhcurveto:
          case t2_op_hvcurveto:
            {
              FT_Int  phase;
  
  
              FT_TRACE4(( op == t2_op_vhcurveto ? " vhcurveto"
                                                : " hvcurveto" ));
  
              if ( start_point ( builder, x, y ) )
                goto Memory_Error;
  
              args = stack;
              if (num_args < 4 || ( num_args % 4 ) > 1 )
                goto Stack_Underflow;
  
              if ( check_points( builder, ( num_args / 4 ) * 3 ) )
                goto Stack_Underflow;
  
              phase = ( op == t2_op_hvcurveto );
  
              while ( num_args >= 4 )
              {
                num_args -= 4;
                if ( phase )
                {
                  x += args[0];
                  add_point( builder, x, y, 0 );
                  x += args[1];
                  y += args[2];
                  add_point( builder, x, y, 0 );
                  y += args[3];
                  if ( num_args == 1 )
                    x += args[4];
                  add_point( builder, x, y, 1 );
                }
                else
                {
                  y += args[0];
                  add_point( builder, x, y, 0 );
                  x += args[1];
                  y += args[2];
                  add_point( builder, x, y, 0 );
                  x += args[3];
                  if ( num_args == 1 )
                    y += args[4];
                  add_point( builder, x, y, 1 );
                }
                args  += 4;
                phase ^= 1;
              }
              args = stack;
            }
            break;
  
          case t2_op_rlinecurve:
            {
              FT_Int  num_lines = ( num_args - 6 ) / 2;
  
  
              FT_TRACE4(( " rlinecurve" ));
  
              if ( num_args < 8 || ( num_args - 6 ) & 1 )
                goto Stack_Underflow;
  
              if ( start_point( builder, x, y )           ||
                   check_points( builder, num_lines + 3 ) )
                goto Memory_Error;
  
              args = stack;
  
              /* first, add the line segments */
              while ( num_lines > 0 )
              {
                x += args[0];
                y += args[1];
                add_point( builder, x, y, 1 );
                args += 2;
                num_lines--;
              }
  
              /* then the curve */
              x += args[0];
              y += args[1];
              add_point( builder, x, y, 0 );
              x += args[2];
              y += args[3];
              add_point( builder, x, y, 0 );
              x += args[4];
              y += args[5];
              add_point( builder, x, y, 1 );
              args = stack;
            }
            break;
  
          case t2_op_rcurveline:
            {
              FT_Int  num_curves = ( num_args - 2 ) / 6;
  
  
              FT_TRACE4(( " rcurveline" ));
  
              if ( num_args < 8 || ( num_args - 2 ) % 6 )
                goto Stack_Underflow;
  
              if ( start_point ( builder, x, y )             ||
                   check_points( builder, num_curves*3 + 2 ) )
                goto Memory_Error;
  
              args = stack;
  
              /* first, add the curves */
              while ( num_curves > 0 )
              {
                x += args[0];
                y += args[1];
                add_point( builder, x, y, 0 );
                x += args[2];
                y += args[3];
                add_point( builder, x, y, 0 );
                x += args[4];
                y += args[5];
                add_point( builder, x, y, 1 );
                args += 6;
                num_curves--;
              }
  
              /* then the final line */
              x += args[0];
              y += args[1];
              add_point( builder, x, y, 1 );
              args = stack;
            }
            break;
  
          case t2_op_hflex1:
            {
              FT_Pos start_y;
  
  
              FT_TRACE4(( " hflex1" ));
  
              args = stack;
  
              /* adding five more points; 4 control points, 1 on-curve point */
              /* make sure we have enough space for the start point if it    */
              /* needs to be added..                                         */
              if ( start_point( builder, x, y ) ||
                   check_points( builder, 6 )   )
                goto Memory_Error;
  
              /* Record the starting point's y postion for later use */
              start_y = y;
  
              /* first control point */
              x += args[0];
              y += args[1];
              add_point( builder, x, y, 0 );
  
              /* second control point */
              x += args[2];
              y += args[3];
              add_point( builder, x, y, 0 );
  
              /* join point; on curve, with y-value the same as the last */
              /* control point's y-value                                 */
              x += args[4];
              add_point( builder, x, y, 1 );
  
              /* third control point, with y-value the same as the join */
              /* point's y-value                                        */
              x += args[5];
              add_point( builder, x, y, 0 );
  
              /* fourth control point */
              x += args[6];
              y += args[7];
              add_point( builder, x, y, 0 );
  
              /* ending point, with y-value the same as the start   */
              x += args[8];
              y  = start_y;
              add_point( builder, x, y, 1 );
  
              args = stack;
              break;
            }
  
          case t2_op_hflex:
            {
              FT_Pos start_y;
  
  
              FT_TRACE4(( " hflex" ));
  
              args = stack;
  
              /* adding six more points; 4 control points, 2 on-curve points */
              if ( start_point( builder, x, y ) ||
                   check_points ( builder, 6 )  )
                goto Memory_Error;
  
              /* record the starting point's y-position for later use */
              start_y = y;
  
              /* first control point */
              x += args[0];
              add_point( builder, x, y, 0 );
  
              /* second control point */
              x += args[1];
              y += args[2];
              add_point( builder, x, y, 0 );
  
              /* join point; on curve, with y-value the same as the last */
              /* control point's y-value                                 */
              x += args[3];
              add_point( builder, x, y, 1 );
  
              /* third control point, with y-value the same as the join */
              /* point's y-value                                        */
              x += args[4];
              add_point( builder, x, y, 0 );
  
              /* fourth control point */
              x += args[5];
              y  = start_y;
              add_point( builder, x, y, 0 );
  
              /* ending point, with y-value the same as the start point's */
              /* y-value -- we don't add this point, though               */
              x += args[6];
              add_point( builder, x, y, 1 );
  
              args = stack;
              break;
            }
  
          case t2_op_flex1:
            {
              FT_Pos  start_x, start_y; /* record start x, y values for alter */
                                        /* use                                */
              FT_Int  dx = 0, dy = 0;   /* used in horizontal/vertical        */
                                        /* algorithm below                    */
              FT_Int  horizontal, count;
  
  
              FT_TRACE4(( " flex1" ));
  
              /* adding six more points; 4 control points, 2 on-curve points */
              if ( start_point( builder, x, y ) ||
                   check_points( builder, 6 )   )
                 goto Memory_Error;
  
              /* record the starting point's x, y postion for later use */
              start_x = x;
              start_y = y;
  
              /* XXX: figure out whether this is supposed to be a horizontal */
              /*      or vertical flex; the Type 2 specification is vague... */
  
              args = stack;
  
              /* grab up to the last argument */
              for ( count = 5; count > 0; count-- )
              {
                dx += args[0];
                dy += args[1];
                args += 2;
              }
  
              /* rewind */
              args = stack;
  
              if ( dx < 0 ) dx = -dx;
              if ( dy < 0 ) dy = -dy;
  
              /* strange test, but here it is... */
              horizontal = ( dx > dy );
  
              for ( count = 5; count > 0; count-- )
              {
                x += args[0];
                y += args[1];
                add_point( builder, x, y, (FT_Bool)( count == 3 ) );
                args += 2;
              }
  
              /* is last operand an x- or y-delta? */
              if ( horizontal )
              {
                x += args[0];
                y  = start_y;
              }
              else
              {
                x  = start_x;
                y += args[0];
              }
  
              add_point( builder, x, y, 1 );
  
              args = stack;
              break;
             }
  
          case t2_op_flex:
            {
              FT_UInt  count;
  
  
              FT_TRACE4(( " flex" ));
  
              if ( start_point( builder, x, y ) ||
                   check_points( builder, 6 )   )
                goto Memory_Error;
  
              args = stack;
              for ( count = 6; count > 0; count-- )
              {
                x += args[0];
                y += args[1];
                add_point( builder, x, y,
                           (FT_Bool)( count == 3 || count == 0 ) );
                args += 2;
              }
  
              args = stack;
            }
            break;
  
          case t2_op_endchar:
            FT_TRACE4(( " endchar" ));
  
            close_contour( builder );
  
            /* add current outline to the glyph slot */
            FT_GlyphLoader_Add( builder->loader );
  
            /* return now! */
            FT_TRACE4(( "\n\n" ));
            return T2_Err_Ok;
  
          case t2_op_abs:
            FT_TRACE4(( " abs" ));
  
            if ( args[0] < 0 )
              args[0] = -args[0];
            args++;
            break;
  
          case t2_op_add:
            FT_TRACE4(( " add" ));
  
            args[0] += args[1];
            args++;
            break;
  
          case t2_op_sub:
            FT_TRACE4(( " sub" ));
  
            args[0] -= args[1];
            args++;
            break;
  
          case t2_op_div:
            FT_TRACE4(( " div" ));
  
            args[0] = FT_DivFix( args[0], args[1] );
            args++;
            break;
  
          case t2_op_neg:
            FT_TRACE4(( " neg" ));
  
            args[0] = -args[0];
            args++;
            break;
  
          case t2_op_random:
            {
              FT_Fixed  rand;
  
  
              FT_TRACE4(( " rand" ));
  
              rand = seed;
              if ( rand >= 0x8000 )
                rand++;
  
              args[0] = rand;
              seed    = FT_MulFix( seed, 0x10000L - seed );
              if ( seed == 0 )
                seed += 0x2873;
              args++;
            }
            break;
  
          case t2_op_mul:
            FT_TRACE4(( " mul" ));
  
            args[0] = FT_MulFix( args[0], args[1] );
            args++;
            break;
  
          case t2_op_sqrt:
            FT_TRACE4(( " sqrt" ));
  
            if ( args[0] > 0 )
            {
              FT_Int    count = 9;
              FT_Fixed  root  = args[0];
              FT_Fixed  new_root;
  
  
              for (;;)
              {
                new_root = ( root + FT_DivFix(args[0],root) + 1 ) >> 1;
                if ( new_root == root || count <= 0 )
                  break;
                root = new_root;
              }
              args[0] = new_root;
            }
            else
              args[0] = 0;
            args++;
            break;
  
          case t2_op_drop:
            /* nothing */
            FT_TRACE4(( " drop" ));
  
            break;
  
          case t2_op_exch:
            {
              FT_Fixed  tmp;
  
  
              FT_TRACE4(( " exch" ));
  
              tmp     = args[0];
              args[0] = args[1];
              args[1] = tmp;
              args   += 2;
            }
            break;
  
          case t2_op_index:
            {
              FT_Int  index = args[0] >> 16;
  
  
              FT_TRACE4(( " index" ));
  
              if ( index < 0 )
                index = 0;
              else if ( index > num_args - 2 )
                index = num_args - 2;
              args[0] = args[-( index + 1 )];
              args++;
            }
            break;
  
          case t2_op_roll:
            {
              FT_Int  count = (FT_Int)( args[0] >> 16 );
              FT_Int  index = (FT_Int)( args[1] >> 16 );
  
  
              FT_TRACE4(( " roll" ));
  
              if ( count <= 0 )
                count = 1;
  
              args -= count;
              if ( args < stack )
                goto Stack_Underflow;
  
              if ( index >= 0 )
              {
                while ( index > 0 )
                {
                  FT_Fixed  tmp = args[count - 1];
                  FT_Int    i;
  
  
                  for ( i = count - 2; i >= 0; i-- )
                    args[i + 1] = args[i];
                  args[0] = tmp;
                  index--;
                }
              }
              else
              {
                while ( index < 0 )
                {
                  FT_Fixed  tmp = args[0];
                  FT_Int    i;
  
  
                  for ( i = 0; i < count - 1; i++ )
                    args[i] = args[i + 1];
                  args[count - 1] = tmp;
                  index++;
                }
              }
              args += count;
            }
            break;
  
          case t2_op_dup:
            FT_TRACE4(( " dup" ));
  
            args[1] = args[0];
            args++;
            break;
  
          case t2_op_put:
            {
              FT_Fixed  val   = args[0];
              FT_Int    index = (FT_Int)( args[1] >> 16 );
  
  
              FT_TRACE4(( " put" ));
  
              if ( index >= 0 && index < decoder->len_buildchar )
                decoder->buildchar[index] = val;
            }
            break;
  
          case t2_op_get:
            {
              FT_Int   index = (FT_Int)( args[0] >> 16 );
              FT_Fixed val   = 0;
  
  
              FT_TRACE4(( " get" ));
  
              if ( index >= 0 && index < decoder->len_buildchar )
                val = decoder->buildchar[index];
  
              args[0] = val;
              args++;
            }
            break;
  
          case t2_op_store:
            FT_TRACE4(( " store "));
  
            goto Unimplemented;
  
          case t2_op_load:
            FT_TRACE4(( " load" ));
  
            goto Unimplemented;
  
          case t2_op_and:
            {
              FT_Fixed  cond = args[0] && args[1];
  
  
              FT_TRACE4(( " and" ));
  
              args[0] = cond ? 0x10000L : 0;
              args++;
            }
            break;
  
          case t2_op_or:
            {
              FT_Fixed  cond = args[0] || args[1];
  
  
              FT_TRACE4(( " or" ));
  
              args[0] = cond ? 0x10000L : 0;
              args++;
            }
            break;
  
          case t2_op_eq:
            {
              FT_Fixed  cond = !args[0];
  
  
              FT_TRACE4(( " eq" ));
  
              args[0] = cond ? 0x10000L : 0;
              args++;
            }
            break;
  
          case t2_op_ifelse:
            {
              FT_Fixed  cond = (args[2] <= args[3]);
  
  
              FT_TRACE4(( " ifelse" ));
  
              if ( !cond )
                args[0] = args[1];
              args++;
            }
            break;
  
          case t2_op_callsubr:
            {
              FT_UInt  index = (FT_UInt)( ( args[0] >> 16 ) +
                                          decoder->locals_bias );
  
  
              FT_TRACE4(( " callsubr(%d)", index ));
  
              if ( index >= decoder->num_locals )
              {
                FT_ERROR(( "T2_Parse_CharStrings:" ));
                FT_ERROR(( "  invalid local subr index\n" ));
                goto Syntax_Error;
              }
  
              if ( zone - decoder->zones >= T2_MAX_SUBRS_CALLS )
              {
                FT_ERROR(( "T2_Parse_CharStrings: too many nested subrs\n" ));
                goto Syntax_Error;
              }
  
              zone->cursor = ip;  /* save current instruction pointer */
  
              zone++;
              zone->base   = decoder->locals[index];
              zone->limit  = decoder->locals[index+1];
              zone->cursor = zone->base;
  
              if ( !zone->base )
              {
                FT_ERROR(( "T2_Parse_CharStrings: invoking empty subrs!\n" ));
                goto Syntax_Error;
              }
  
              decoder->zone = zone;
              ip            = zone->base;
              limit         = zone->limit;
            }
            break;
  
          case t2_op_callgsubr:
            {
              FT_UInt  index = (FT_UInt)( ( args[0] >> 16 ) +
                                          decoder->globals_bias );
  
  
              FT_TRACE4(( " callgsubr(%d)", index ));
  
              if ( index >= decoder->num_globals )
              {
                FT_ERROR(( "T2_Parse_CharStrings:" ));
                FT_ERROR(( " invalid global subr index\n" ));
                goto Syntax_Error;
              }
  
              if ( zone - decoder->zones >= T2_MAX_SUBRS_CALLS )
              {
                FT_ERROR(( "T2_Parse_CharStrings: too many nested subrs\n" ));
                goto Syntax_Error;
              }
  
              zone->cursor = ip;  /* save current instruction pointer */
  
              zone++;
              zone->base   = decoder->globals[index];
              zone->limit  = decoder->globals[index+1];
              zone->cursor = zone->base;
  
              if ( !zone->base )
              {
                FT_ERROR(( "T2_Parse_CharStrings: invoking empty subrs!\n" ));
                goto Syntax_Error;
              }
  
              decoder->zone = zone;
              ip            = zone->base;
              limit         = zone->limit;
            }
            break;
  
          case t2_op_return:
            FT_TRACE4(( " return" ));
  
            if ( decoder->zone <= decoder->zones )
            {
              FT_ERROR(( "T2_Parse_CharStrings: unexpected return\n" ));
              goto Syntax_Error;
            }
  
            decoder->zone--;
            zone  = decoder->zone;
            ip    = zone->cursor;
            limit = zone->limit;
            break;
  
          default:
          Unimplemented:
            FT_ERROR(( "Unimplemented opcode: %d", ip[-1] ));
  
            if ( ip[-1] == 12 )
              FT_ERROR(( " %d", ip[0] ));
            FT_ERROR(( "\n" ));
  
            return T2_Err_Unimplemented_Feature;
          }
  
        decoder->top = args;
  
        } /* general operator processing */
  
      } /* while ip < limit */
  
      FT_TRACE4(( "..end..\n\n" ));
  
      return error;
  
    Syntax_Error:
      FT_TRACE4(( "T2_Parse_CharStrings: syntax error!" ));
      return T2_Err_Invalid_File_Format;
  
    Stack_Underflow:
      FT_TRACE4(( "T2_Parse_CharStrings: stack underflow!" ));
      return T2_Err_Too_Few_Arguments;
  
    Stack_Overflow:
      FT_TRACE4(( "T2_Parse_CharStrings: stack overflow!" ));
      return T2_Err_Stack_Overflow;
  
    Memory_Error:
      return builder->error;
    }
  
  
    /*************************************************************************/
    /*************************************************************************/
    /*************************************************************************/
    /**********                                                      *********/
    /**********                                                      *********/
    /**********            COMPUTE THE MAXIMUM ADVANCE WIDTH         *********/
    /**********                                                      *********/
    /**********    The following code is in charge of computing      *********/
    /**********    the maximum advance width of the font.  It        *********/
    /**********    quickly processes each glyph charstring to        *********/
    /**********    extract the value from either a `sbw' or `seac'   *********/
    /**********    operator.                                         *********/
    /**********                                                      *********/
    /*************************************************************************/
    /*************************************************************************/
    /*************************************************************************/
  
  
  #if 0 /* unused until we support pure CFF fonts */
  
  
    LOCAL_FUNC
    FT_Error  T2_Compute_Max_Advance( TT_Face  face,
                                      FT_Int*  max_advance )
    {
      FT_Error    error = 0;
      T2_Decoder  decoder;
      FT_Int      glyph_index;
      CFF_Font*   cff = (CFF_Font*)face->other;
  
  
      *max_advance = 0;
  
      /* Initialize load decoder */
      T2_Init_Decoder( &decoder, face, 0, 0 );
  
      decoder.builder.metrics_only = 1;
      decoder.builder.load_points  = 0;
  
      /* For each glyph, parse the glyph charstring and extract */
      /* the advance width.                                     */
      for ( glyph_index = 0; glyph_index < face->root.num_glyphs;
            glyph_index++ )
      {
        FT_Byte*  charstring;
        FT_ULong  charstring_len;
  
  
        /* now get load the unscaled outline */
        error = T2_Access_Element( &cff->charstrings_index, glyph_index,
                                   &charstring, &charstring_len );
        if ( !error )
        {
          T2_Prepare_Decoder( &decoder, glyph_index );
          error = T2_Parse_CharStrings( &decoder, charstring, charstring_len );
  
          T2_Forget_Element( &cff->charstrings_index, &charstring );
        }
  
        /* ignore the error if one has occurred -- skip to next glyph */
        error = 0;
      }
  
      *max_advance = decoder.builder.advance.x;
  
      return T2_Err_Ok;
    }
  
  
  #endif /* 0 */
  
  
    /*************************************************************************/
    /*************************************************************************/
    /*************************************************************************/
    /**********                                                      *********/
    /**********                                                      *********/
    /**********               UNHINTED GLYPH LOADER                  *********/
    /**********                                                      *********/
    /**********    The following code is in charge of loading a      *********/
    /**********    single outline.  It completely ignores hinting    *********/
    /**********    and is used when FT_LOAD_NO_HINTING is set.       *********/
    /**********                                                      *********/
    /*************************************************************************/
    /*************************************************************************/
    /*************************************************************************/
  
  
    LOCAL_FUNC
    FT_Error  T2_Load_Glyph( T2_GlyphSlot  glyph,
                             T2_Size       size,
                             FT_Int        glyph_index,
                             FT_Int        load_flags )
    {
      FT_Error    error;
      T2_Decoder  decoder;
      TT_Face     face = (TT_Face)glyph->root.face;
      FT_Bool     hinting;
      CFF_Font*   cff = (CFF_Font*)face->extra.data;
  
  
      if ( load_flags & FT_LOAD_NO_RECURSE )
        load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING;
  
      glyph->x_scale = 0x10000L;
      glyph->y_scale = 0x10000L;
      if ( size )
      {
        glyph->x_scale = size->metrics.x_scale;
        glyph->y_scale = size->metrics.y_scale;
      }
  
      glyph->root.outline.n_points   = 0;
      glyph->root.outline.n_contours = 0;
  
      hinting = ( load_flags & FT_LOAD_NO_SCALE   ) == 0 &&
                ( load_flags & FT_LOAD_NO_HINTING ) == 0;
  
      glyph->root.format = ft_glyph_format_outline;  /* by default */
  
      {
        FT_Byte*  charstring;
        FT_ULong  charstring_len;
  
  
        T2_Init_Decoder( &decoder, face, size, glyph );
  
        decoder.builder.no_recurse =
          (FT_Bool)( ( load_flags & FT_LOAD_NO_RECURSE ) != 0 );
  
        /* now load the unscaled outline */
        error = T2_Access_Element( &cff->charstrings_index, glyph_index,
                                   &charstring, &charstring_len );
        if ( !error )
        {
          T2_Prepare_Decoder( &decoder, glyph_index );
          error = T2_Parse_CharStrings( &decoder, charstring, charstring_len );
  
          T2_Forget_Element( &cff->charstrings_index, &charstring );
        }
  
        /* save new glyph tables */
        T2_Done_Builder( &decoder.builder );
      }
  
      /* Now, set the metrics -- this is rather simple, as   */
      /* the left side bearing is the xMin, and the top side */
      /* bearing the yMax.                                   */
      if ( !error )
      {
        /* for composite glyphs, return only left side bearing and */
        /* advance width                                           */
        if ( glyph->root.format == ft_glyph_format_composite )
        {
          glyph->root.metrics.horiBearingX = decoder.builder.left_bearing.x;
          glyph->root.metrics.horiAdvance  = decoder.glyph_width;
        }
        else
        {
          FT_BBox            cbox;
          FT_Glyph_Metrics*  metrics = &glyph->root.metrics;
  
  
          /* copy the _unscaled_ advance width */
          metrics->horiAdvance          = decoder.glyph_width;
          glyph->root.linearHoriAdvance = decoder.glyph_width;
  
          /* make up vertical metrics */
          metrics->vertBearingX = 0;
          metrics->vertBearingY = 0;
          metrics->vertAdvance  = 0;
  
          glyph->root.linearVertAdvance = 0;
  
          glyph->root.format = ft_glyph_format_outline;
  
          glyph->root.outline.flags = 0;
          if ( size && size->metrics.y_ppem < 24 )
            glyph->root.outline.flags |= ft_outline_high_precision;
  
          glyph->root.outline.flags |= ft_outline_reverse_fill;
  
          if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 )
          {
            /* scale the outline and the metrics */
            FT_Int       n;
            FT_Outline*  cur     = &glyph->root.outline;
            FT_Vector*   vec     = cur->points;
            FT_Fixed     x_scale = glyph->x_scale;
            FT_Fixed     y_scale = glyph->y_scale;
  
  
            /* First of all, scale the points */
            for ( n = cur->n_points; n > 0; n--, vec++ )
            {
              vec->x = FT_MulFix( vec->x, x_scale );
              vec->y = FT_MulFix( vec->y, y_scale );
            }
  
            FT_Outline_Get_CBox( &glyph->root.outline, &cbox );
  
            /* Then scale the metrics */
            metrics->horiAdvance  = FT_MulFix( metrics->horiAdvance,  x_scale );
            metrics->vertAdvance  = FT_MulFix( metrics->vertAdvance,  y_scale );
  
            metrics->vertBearingX = FT_MulFix( metrics->vertBearingX, x_scale );
            metrics->vertBearingY = FT_MulFix( metrics->vertBearingY, y_scale );
          }
  
  #if 0
          /* apply the font matrix */
          FT_Outline_Transform( &glyph->root.outline, cff->font_matrix );
  #endif
  
          /* compute the other metrics */
          FT_Outline_Get_CBox( &glyph->root.outline, &cbox );
  
          /* grid fit the bounding box if necessary */
          if ( hinting )
          {
            cbox.xMin &= -64;
            cbox.yMin &= -64;
            cbox.xMax  = ( cbox.xMax + 63 ) & -64;
            cbox.yMax  = ( cbox.yMax + 63 ) & -64;
          }
  
          metrics->width  = cbox.xMax - cbox.xMin;
          metrics->height = cbox.yMax - cbox.yMin;
  
          metrics->horiBearingX = cbox.xMin;
          metrics->horiBearingY = cbox.yMax;
        }
      }
  
      return error;
    }
  
  
  /* END */
  

Download