kmx git

/***************************************************************************/
/*                                                                         */
/*  ftconfig.in                                                            */
/*                                                                         */
/*    UNIX-specific configuration file (specification only).               */
/*                                                                         */
/*  Copyright 1996-2001, 2002, 2003, 2004, 2006, 2007, 2008 by             */
/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
/*                                                                         */
/*  This file is part of the FreeType project, and may only be used,       */
/*  modified, and distributed under the terms of the FreeType project      */
/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
/*  this file you indicate that you have read the license and              */
/*  understand and accept it fully.                                        */
/*                                                                         */
/***************************************************************************/


  /*************************************************************************/
  /*                                                                       */
  /* This header file contains a number of macro definitions that are used */
  /* by the rest of the engine.  Most of the macros here are automatically */
  /* determined at compile time, and you should not need to change it to   */
  /* port FreeType, except to compile the library with a non-ANSI          */
  /* compiler.                                                             */
  /*                                                                       */
  /* Note however that if some specific modifications are needed, we       */
  /* advise you to place a modified copy in your build directory.          */
  /*                                                                       */
  /* The build directory is usually `freetype/builds/<system>', and        */
  /* contains system-specific files that are always included first when    */
  /* building the library.                                                 */
  /*                                                                       */
  /*************************************************************************/


#ifndef __FTCONFIG_H__
#define __FTCONFIG_H__

#include <ft2build.h>
#include FT_CONFIG_OPTIONS_H
#include FT_CONFIG_STANDARD_LIBRARY_H


FT_BEGIN_HEADER


  /*************************************************************************/
  /*                                                                       */
  /*               PLATFORM-SPECIFIC CONFIGURATION MACROS                  */
  /*                                                                       */
  /* These macros can be toggled to suit a specific system.  The current   */
  /* ones are defaults used to compile FreeType in an ANSI C environment   */
  /* (16bit compilers are also supported).  Copy this file to your own     */
  /* `freetype/builds/<system>' directory, and edit it to port the engine. */
  /*                                                                       */
  /*************************************************************************/


#undef HAVE_UNISTD_H
#undef HAVE_FCNTL_H
#undef HAVE_STDINT_H


  /* There are systems (like the Texas Instruments 'C54x) where a `char' */
  /* has 16 bits.  ANSI C says that sizeof(char) is always 1.  Since an  */
  /* `int' has 16 bits also for this system, sizeof(int) gives 1 which   */
  /* is probably unexpected.                                             */
  /*                                                                     */
  /* `CHAR_BIT' (defined in limits.h) gives the number of bits in a      */
  /* `char' type.                                                        */

#ifndef FT_CHAR_BIT
#define FT_CHAR_BIT  CHAR_BIT
#endif


#undef FT_USE_AUTOCONF_SIZEOF_TYPES
#ifdef FT_USE_AUTOCONF_SIZEOF_TYPES

#undef SIZEOF_INT
#undef SIZEOF_LONG
#define FT_SIZEOF_INT  SIZEOF_INT
#define FT_SIZEOF_LONG SIZEOF_LONG

#else /* !FT_USE_AUTOCONF_SIZEOF_TYPES */

  /* Following cpp computation of the bit length of int and long */
  /* is copied from default include/freetype/config/ftconfig.h.  */
  /* If any improvement is required for this file, it should be  */
  /* applied to the original header file for the builders that   */
  /* does not use configure script.                              */

  /* The size of an `int' type.  */
#if                                 FT_UINT_MAX == 0xFFFFUL
#define FT_SIZEOF_INT  (16 / FT_CHAR_BIT)
#elif                               FT_UINT_MAX == 0xFFFFFFFFUL
#define FT_SIZEOF_INT  (32 / FT_CHAR_BIT)
#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL
#define FT_SIZEOF_INT  (64 / FT_CHAR_BIT)
#else
#error "Unsupported size of `int' type!"
#endif

  /* The size of a `long' type.  A five-byte `long' (as used e.g. on the */
  /* DM642) is recognized but avoided.                                   */
#if                                  FT_ULONG_MAX == 0xFFFFFFFFUL
#define FT_SIZEOF_LONG  (32 / FT_CHAR_BIT)
#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL
#define FT_SIZEOF_LONG  (32 / FT_CHAR_BIT)
#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL
#define FT_SIZEOF_LONG  (64 / FT_CHAR_BIT)
#else
#error "Unsupported size of `long' type!"
#endif

#endif /* !FT_USE_AUTOCONF_SIZEOF_TYPES */


  /* Preferred alignment of data */
#define FT_ALIGNMENT  8


  /* FT_UNUSED is a macro used to indicate that a given parameter is not  */
  /* used -- this is only used to get rid of unpleasant compiler warnings */
#ifndef FT_UNUSED
#define FT_UNUSED( arg )  ( (arg) = (arg) )
#endif


  /*************************************************************************/
  /*                                                                       */
  /*                     AUTOMATIC CONFIGURATION MACROS                    */
  /*                                                                       */
  /* These macros are computed from the ones defined above.  Don't touch   */
  /* their definition, unless you know precisely what you are doing.  No   */
  /* porter should need to mess with them.                                 */
  /*                                                                       */
  /*************************************************************************/


  /*************************************************************************/
  /*                                                                       */
  /* Mac support                                                           */
  /*                                                                       */
  /*   This is the only necessary change, so it is defined here instead    */
  /*   providing a new configuration file.                                 */
  /*                                                                       */
#if ( defined( __APPLE__ ) && !defined( DARWIN_NO_CARBON ) ) || \
    ( defined( __MWERKS__ ) && defined( macintosh )        )
  /* no Carbon frameworks for 64bit 10.4.x */
#include "AvailabilityMacros.h"
#if defined( __LP64__ ) && \
    ( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 )
#define DARWIN_NO_CARBON 1
#else
#define FT_MACINTOSH 1
#endif
#endif


  /* Fix compiler warning with sgi compiler */
#if defined( __sgi ) && !defined( __GNUC__ )
#if defined( _COMPILER_VERSION ) && ( _COMPILER_VERSION >= 730 )
#pragma set woff 3505
#endif
#endif


  /*************************************************************************/
  /*                                                                       */
  /* IntN types                                                            */
  /*                                                                       */
  /*   Used to guarantee the size of some specific integers.               */
  /*                                                                       */
  typedef signed short    FT_Int16;
  typedef unsigned short  FT_UInt16;

#if FT_SIZEOF_INT == 4

  typedef signed int      FT_Int32;
  typedef unsigned int    FT_UInt32;

#elif FT_SIZEOF_LONG == 4

  typedef signed long     FT_Int32;
  typedef unsigned long   FT_UInt32;

#else
#error "no 32bit type found -- please check your configuration files"
#endif


  /* look up an integer type that is at least 32 bits */
#if FT_SIZEOF_INT >= 4

  typedef int            FT_Fast;
  typedef unsigned int   FT_UFast;

#elif FT_SIZEOF_LONG >= 4

  typedef long           FT_Fast;
  typedef unsigned long  FT_UFast;

#endif


  /* determine whether we have a 64-bit int type for platforms without */
  /* Autoconf                                                          */
#if FT_SIZEOF_LONG == 8

  /* FT_LONG64 must be defined if a 64-bit type is available */
#define FT_LONG64
#define FT_INT64  long

#elif defined( _MSC_VER ) && _MSC_VER >= 900  /* Visual C++ (and Intel C++) */

  /* this compiler provides the __int64 type */
#define FT_LONG64
#define FT_INT64  __int64

#elif defined( __BORLANDC__ )  /* Borland C++ */

  /* XXXX: We should probably check the value of __BORLANDC__ in order */
  /*       to test the compiler version.                               */

  /* this compiler provides the __int64 type */
#define FT_LONG64
#define FT_INT64  __int64

#elif defined( __WATCOMC__ )   /* Watcom C++ */

  /* Watcom doesn't provide 64-bit data types */

#elif defined( __MWERKS__ )    /* Metrowerks CodeWarrior */

#define FT_LONG64
#define FT_INT64  long long int

#elif defined( __GNUC__ )

  /* GCC provides the `long long' type */
#define FT_LONG64
#define FT_INT64  long long int

#endif /* FT_SIZEOF_LONG == 8 */


  /*************************************************************************/
  /*                                                                       */
  /* A 64-bit data type will create compilation problems if you compile    */
  /* in strict ANSI mode.  To avoid them, we disable its use if __STDC__   */
  /* is defined.  You can however ignore this rule by defining the         */
  /* FT_CONFIG_OPTION_FORCE_INT64 configuration macro.                     */
  /*                                                                       */
#if defined( FT_LONG64 ) && !defined( FT_CONFIG_OPTION_FORCE_INT64 )

#ifdef __STDC__

  /* Undefine the 64-bit macros in strict ANSI compilation mode.  */
  /* Since `#undef' doesn't survive in configuration header files */
  /* we use the postprocessing facility of AC_CONFIG_HEADERS to   */
  /* replace the leading `/' with `#'.                            */
/undef FT_LONG64
/undef FT_INT64

#endif /* __STDC__ */

#endif /* FT_LONG64 && !FT_CONFIG_OPTION_FORCE_INT64 */


#define FT_BEGIN_STMNT  do {
#define FT_END_STMNT    } while ( 0 )
#define FT_DUMMY_STMNT  FT_BEGIN_STMNT FT_END_STMNT


#ifndef  FT_CONFIG_OPTION_NO_ASSEMBLER
  /* Provide assembler fragments for performance-critical functions. */
  /* These must be defined `static __inline__' with GCC.             */

#ifdef __GNUC__

#if defined( __arm__ ) && !defined( __thumb__ )
#define FT_MULFIX_ASSEMBLER  FT_MulFix_arm

  static __inline__ FT_Int32
  FT_MulFix_arm( FT_Int32  a,
                 FT_Int32  b )
  {
    register FT_Int32  t, t2;


    asm __volatile__ (
      "smull  %1, %2, %4, %3\n\t"   /* (lo=%1,hi=%2) = a*b */
      "mov    %0, %2, asr #31\n\t"  /* %0  = (hi >> 31) */
      "add    %0, %0, #0x8000\n\t"  /* %0 += 0x8000 */
      "adds   %1, %1, %0\n\t"       /* %1 += %0 */
      "adc    %2, %2, #0\n\t"       /* %2 += carry */
      "mov    %0, %1, lsr #16\n\t"  /* %0  = %1 >> 16 */
      "orr    %0, %2, lsl #16\n\t"  /* %0 |= %2 << 16 */
      : "=r"(a), "=&r"(t2), "=&r"(t)
      : "r"(a), "r"(b) );
    return a;
  }

#endif /* __arm__ && !__thumb__ */

#if defined( i386 )
#define FT_MULFIX_ASSEMBLER  FT_MulFix_i386

  static __inline__ FT_Int32
  FT_MulFix_i386( FT_Int32  a,
                  FT_Int32  b )
  {
    register FT_Int32  result;


    __asm__ __volatile__ (
      "imul  %%edx\n"
      "movl  %%edx, %%ecx\n"
      "sarl  $31, %%ecx\n"
      "addl  $0x8000, %%ecx\n"
      "addl  %%ecx, %%eax\n"
      "adcl  $0, %%edx\n"
      "shrl  $16, %%eax\n"
      "shll  $16, %%edx\n"
      "addl  %%edx, %%eax\n"
      : "=a"(result), "+d"(b)
      : "a"(a)
      : "%ecx" );
    return result;
  }

#endif /* i386 */

#endif /* __GNUC__ */

#endif /* !FT_CONFIG_OPTION_NO_ASSEMBLER */


#ifdef FT_CONFIG_OPTION_INLINE_MULFIX
#ifdef FT_MULFIX_ASSEMBLER
#define FT_MULFIX_INLINED  FT_MULFIX_ASSEMBLER
#endif
#endif


#ifdef FT_MAKE_OPTION_SINGLE_OBJECT

#define FT_LOCAL( x )      static  x
#define FT_LOCAL_DEF( x )  static  x

#else

#ifdef __cplusplus
#define FT_LOCAL( x )      extern "C"  x
#define FT_LOCAL_DEF( x )  extern "C"  x
#else
#define FT_LOCAL( x )      extern  x
#define FT_LOCAL_DEF( x )  x
#endif

#endif /* FT_MAKE_OPTION_SINGLE_OBJECT */


#ifndef FT_BASE

#ifdef __cplusplus
#define FT_BASE( x )  extern "C"  x
#else
#define FT_BASE( x )  extern  x
#endif

#endif /* !FT_BASE */


#ifndef FT_BASE_DEF

#ifdef __cplusplus
#define FT_BASE_DEF( x )  x
#else
#define FT_BASE_DEF( x )  x
#endif

#endif /* !FT_BASE_DEF */


#ifndef FT_EXPORT

#ifdef __cplusplus
#define FT_EXPORT( x )  extern "C"  x
#else
#define FT_EXPORT( x )  extern  x
#endif

#endif /* !FT_EXPORT */


#ifndef FT_EXPORT_DEF

#ifdef __cplusplus
#define FT_EXPORT_DEF( x )  extern "C"  x
#else
#define FT_EXPORT_DEF( x )  extern  x
#endif

#endif /* !FT_EXPORT_DEF */


#ifndef FT_EXPORT_VAR

#ifdef __cplusplus
#define FT_EXPORT_VAR( x )  extern "C"  x
#else
#define FT_EXPORT_VAR( x )  extern  x
#endif

#endif /* !FT_EXPORT_VAR */

  /* The following macros are needed to compile the library with a   */
  /* C++ compiler and with 16bit compilers.                          */
  /*                                                                 */

  /* This is special.  Within C++, you must specify `extern "C"' for */
  /* functions which are used via function pointers, and you also    */
  /* must do that for structures which contain function pointers to  */
  /* assure C linkage -- it's not possible to have (local) anonymous */
  /* functions which are accessed by (global) function pointers.     */
  /*                                                                 */
  /*                                                                 */
  /* FT_CALLBACK_DEF is used to _define_ a callback function.        */
  /*                                                                 */
  /* FT_CALLBACK_TABLE is used to _declare_ a constant variable that */
  /* contains pointers to callback functions.                        */
  /*                                                                 */
  /* FT_CALLBACK_TABLE_DEF is used to _define_ a constant variable   */
  /* that contains pointers to callback functions.                   */
  /*                                                                 */
  /*                                                                 */
  /* Some 16bit compilers have to redefine these macros to insert    */
  /* the infamous `_cdecl' or `__fastcall' declarations.             */
  /*                                                                 */
#ifndef FT_CALLBACK_DEF
#ifdef __cplusplus
#define FT_CALLBACK_DEF( x )  extern "C"  x
#else
#define FT_CALLBACK_DEF( x )  static  x
#endif
#endif /* FT_CALLBACK_DEF */

#ifndef FT_CALLBACK_TABLE
#ifdef __cplusplus
#define FT_CALLBACK_TABLE      extern "C"
#define FT_CALLBACK_TABLE_DEF  extern "C"
#else
#define FT_CALLBACK_TABLE      extern
#define FT_CALLBACK_TABLE_DEF  /* nothing */
#endif
#endif /* FT_CALLBACK_TABLE */


FT_END_HEADER


#endif /* __FTCONFIG_H__ */


/* END */
kc3-lang/freetype/builds/unix/ftconfig.in

Commit

builds/unix/ftconfig.in
