dnl aclocal.m4 generated automatically by aclocal 1.4-p6
dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
dnl FTGL_PROG_CXX()
dnl Check the build plataform and try to use the native compiler
dnl
AC_DEFUN(FTGL_PROG_CXX,
[dnl
AC_CANONICAL_BUILD
AC_CANONICAL_HOST
dnl I really don't know how to handle the cross-compiling case
if test "$build" = "$host" ; then
case "$build" in
*-*-irix*)
if test -z "$CXX" ; then
CXX=CC
fi
if test -z "$CC" ; then
CC=cc
fi
if test x$CXX = xCC -a -z "$CXXFLAGS" ; then
# It might be worthwhile to move this out of here, say
# EXTRA_CXXFLAGS. Forcing -n32 might cause trouble, too.
CXXFLAGS="-LANG:std -n32 -woff 1201 -O3"
fi
;;
esac
fi
AC_PROG_CXX
])
# Configure paths for FreeType2
# Marcelo Magallon 2001-10-26, based on gtk.m4 by Owen Taylor
dnl AC_CHECK_FT2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for FreeType2, and define FT2_CFLAGS and FT2_LIBS
dnl
AC_DEFUN(AC_CHECK_FT2,
[dnl
dnl Get the cflags and libraries from the freetype-config script
dnl
AC_ARG_WITH(freetype-prefix,
[ --with-ft-prefix=PFX Prefix where FreeType is installed (optional)],
ft_config_prefix="$withval", ft_config_prefix="")
AC_ARG_WITH(freetype-exec-prefix,
[ --with-ft-exec-prefix=PFX Exec prefix where FreeType is installed (optional)],
ft_config_exec_prefix="$withval", ft_config_exec_prefix="")
AC_ARG_ENABLE(freetypetest, [ --disable-freetypetest Do not try to compile and run a test FreeType program],[],
enable_fttest=yes)
if test x$ft_config_exec_prefix != x ; then
ft_config_args="$ft_config_args --exec-prefix=$ft_config_exec_prefix"
if test x${FT2_CONFIG+set} != xset ; then
FT2_CONFIG=$ft_config_exec_prefix/bin/freetype-config
fi
fi
if test x$ft_config_prefix != x ; then
ft_config_args="$ft_config_args --prefix=$ft_config_prefix"
if test x${FT2_CONFIG+set} != xset ; then
FT2_CONFIG=$ft_config_prefix/bin/freetype-config
fi
fi
AC_PATH_PROG(FT2_CONFIG, freetype-config, no)
min_ft_version=ifelse([$1], ,6.1.0,$1)
AC_MSG_CHECKING(for FreeType - version >= $min_ft_version)
no_ft=""
if test "$FT2_CONFIG" = "no" ; then
no_ft=yes
else
FT2_CFLAGS=`$FT2_CONFIG $ft_config_args --cflags`
FT2_LIBS=`$FT2_CONFIG $ft_config_args --libs`
ft_config_version=`$FT2_CONFIG $ft_config_args --version`
ft_config_major_version=`echo $ft_config_version | cut -d . -f 1`
ft_config_minor_version=`echo $ft_config_version | cut -d . -f 2`
ft_config_micro_version=`echo $ft_config_version | cut -d . -f 3`
ft_min_major_version=`echo $min_ft_version | cut -d . -f 1`
ft_min_minor_version=`echo $min_ft_version | cut -d . -f 2`
ft_min_micro_version=`echo $min_ft_version | cut -d . -f 3`
if test "x$enable_fttest" = "xyes" ; then
ft_config_version=`expr $ft_config_major_version \* 10000 + $ft_config_minor_version \* 100 + $ft_config_micro_version`
ft_min_version=`expr $ft_min_major_version \* 10000 + $ft_min_minor_version \* 100 + $ft_min_micro_version`
if test $ft_config_version -lt $ft_min_version ; then
ifelse([$3], , :, [$3])
else
ac_save_CFLAGS="$CFLAGS"
ac_save_LIBS="$LIBS"
CFLAGS="$CFLAGS $FT2_CFLAGS"
LIBS="$FT2_LIBS $LIBS"
dnl
dnl Sanity checks the results of freetype-config to some extent
dnl
AC_TRY_RUN([
#include <ft2build.h>
#include FT_FREETYPE_H
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
FT_Library library;
FT_Error error;
error = FT_Init_FreeType( &library );
if ( error )
{
return 1;
} else {
FT_Done_FreeType( library );
return 0;
}
}
],, no_ft=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
CFLAGS="$ac_save_CFLAGS"
LIBS="$ac_save_LIBS"
fi # test $ft_config_version -lt $ft_min_version
fi # test "x$enable_fttest" = "xyes"
fi # test "$FT2_CONFIG" = "no"
if test "x$no_ft" = x ; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
if test "$FT2_CONFIG" = "no" ; then
echo "*** The freetype-config script installed by FT2 could not be found"
echo "*** If FT2 was installed in PREFIX, make sure PREFIX/bin is in"
echo "*** your path, or set the FT2_CONFIG environment variable to the"
echo "*** full path to freetype-config."
else
echo "*** The FreeType test program failed to run. If your system uses"
echo "*** shared libraries and they are installed outside the normal"
echo "*** system library path, make sure the variable LD_LIBRARY_PATH"
echo "*** (or whatever is appropiate for your system) is correctly set."
fi
FT2_CFLAGS=""
FT2_LIBS=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(FT2_CFLAGS)
AC_SUBST(FT2_LIBS)
])
dnl FTGL_CHECK_GL()
dnl Check for OpenGL development environment and GLU >= 1.2
dnl
AC_DEFUN([FTGL_CHECK_GL],
[dnl
AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([AC_PATH_X])
AC_REQUIRE([AC_PATH_XTRA])
AC_ARG_WITH([--with-gl-inc],
AC_HELP_STRING([--with-gl-inc=DIR],[Directory where GL/gl.h is installed]))
AC_ARG_WITH([--with-gl-lib],
AC_HELP_STRING([--with-gl-lib=DIR],[Directory where OpenGL libraries are installed]))
AC_LANG_SAVE
AC_LANG_C
GL_SAVE_CPPFLAGS="$CPPFLAGS"
GL_SAVE_LIBS="$LIBS"
if test "x$no_x" != xyes ; then
GL_CFLAGS="$X_CFLAGS"
GL_X_LIBS="$X_PRE_LIBS $X_LIBS -lX11 -lXext -lXmu $X_EXTRA_LIBS"
fi
if test "x$with_gl_inc" != "xnone" ; then
if test -d "$with_gl_inc" ; then
GL_CFLAGS="-I$with_gl_inc"
else
GL_CFLAGS="$with_gl_inc"
fi
else
GL_CFLAGS=
fi
CPPFLAGS="$GL_CFLAGS"
AC_CHECK_HEADER([GL/gl.h], [], [AC_MSG_ERROR(GL/gl.h is needed, please specify its location with --with-gl-inc. If this still fails, please contact mmagallo@debian.org, include the string FTGL somewhere in the subject line and provide a copy of the config.log file that was left behind.)])
AC_MSG_CHECKING([for GL library])
if test "x$with_gl_lib" != "x" ; then
if test -d "$with_gl_lib" ; then
LIBS="-L$with_gl_lib -lGL"
else
LIBS="$with_gl_lib"
fi
else
LIBS="-lGL"
fi
AC_LINK_IFELSE([AC_LANG_CALL([],[glBegin])],[HAVE_GL=yes], [HAVE_GL=no])
if test "x$HAVE_GL" = xno ; then
if test "x$GL_X_LIBS" != x ; then
LIBS="-lGL $GL_X_LIBS"
AC_LINK_IFELSE([AC_LANG_CALL([],[glBegin])],[HAVE_GL=yes], [HAVE_GL=no])
fi
fi
if test "x$HAVE_GL" = xyes ; then
AC_MSG_RESULT([yes])
GL_LIBS=$LIBS
else
AC_MSG_RESULT([no])
AC_MSG_ERROR([GL library could not be found, please specify its location with --with-gl-lib. If this still fails, please contact mmagallo@debian.org, include the string FTGL somewhere in the subject line and provide a copy of the config.log file that was left behind.])
fi
AC_CHECK_HEADER([GL/glu.h])
AC_MSG_CHECKING([for GLU version >= 1.2])
AC_TRY_COMPILE([#include <GL/glu.h>], [
#if !defined(GLU_VERSION_1_2)
#error GLU too old
#endif
],
[AC_MSG_RESULT([yes])],
[AC_MSG_RESULT([no])
AC_MSG_ERROR([GLU >= 1.2 is needed to compile this library])
])
AC_MSG_CHECKING([for GLU library])
LIBS="-lGLU $GL_LIBS"
AC_LINK_IFELSE([AC_LANG_CALL([],[gluNewTess])],[HAVE_GLU=yes], [HAVE_GLU=no])
if test "x$HAVE_GLU" = xno ; then
if test "x$GL_X_LIBS" != x ; then
LIBS="-lGLU $GL_LIBS $GL_X_LIBS"
AC_LINK_IFELSE([AC_LANG_CALL([],[gluNewTess])],[HAVE_GLU=yes], [HAVE_GLU=no])
fi
fi
if test "x$HAVE_GLU" = xyes ; then
AC_MSG_RESULT([yes])
GL_LIBS="$LIBS"
else
AC_MSG_RESULT([no])
AC_MSG_ERROR([GLU library could not be found, please specify its location with --with-gl-lib. If this still fails, please contact mmagallo@debian.org, include the string FTGL somewhere in the subject line and provide a copy of the config.log file that was left behind.])
fi
AC_SUBST(GL_CFLAGS)
AC_SUBST(GL_LIBS)
CPPFLAGS="$GL_SAVE_CPPFLAGS"
LIBS="$GL_SAVE_LIBS"
AC_LANG_RESTORE
GL_X_LIBS=""
])
dnl FTGL_CHECK_GLUT()
dnl Check for GLUT development environment
dnl
AC_DEFUN([FTGL_CHECK_GLUT],
[dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PATH_X])dnl
AC_REQUIRE([AC_PATH_XTRA])dnl
AC_REQUIRE([FTGL_CHECK_GL])dnl
AC_ARG_WITH([--with-glut-inc],
AC_HELP_STRING([--with-glut-inc=DIR],[Directory where GL/glut.h is installed (optional)]))
AC_ARG_WITH([--with-glut-lib],
AC_HELP_STRING([--with-glut-lib=DIR],[Directory where GLUT libraries are installed (optional)]))
AC_LANG_SAVE
AC_LANG_C
GLUT_SAVE_CPPFLAGS="$CPPFLAGS"
GLUT_SAVE_LIBS="$LIBS"
if test "x$no_x" != xyes ; then
GLUT_CFLAGS="$X_CFLAGS"
GLUT_X_LIBS="$X_PRE_LIBS $X_LIBS -lX11 -lXext -lXmu $X_EXTRA_LIBS"
fi
if test "x$with_glut_inc" != "xnone" ; then
if test -d "$with_glut_inc" ; then
GLUT_CFLAGS="-I$with_glut_inc"
else
GLUT_CFLAGS="$with_glut_inc"
fi
else
GLUT_CFLAGS=
fi
CPPFLAGS="$GLUT_CFLAGS"
AC_CHECK_HEADER([GL/glut.h], [HAVE_GLUT=yes], [HAVE_GLUT=no])
if test "x$HAVE_GLUT" = xno ; then
AC_MSG_WARN([GLUT headers not availabe, example program won't be compiled.])
else
# Check for GLUT libraries
AC_MSG_CHECKING([for GLUT library])
if test "x$with_glut_lib" != "x" ; then
if test -d "$with_glut_lib" ; then
LIBS="-L$with_glut_lib -lglut"
else
LIBS="$with_glut_lib"
fi
else
LIBS="-lglut"
fi
AC_LINK_IFELSE(
[AC_LANG_CALL([],[glutInit])],
[HAVE_GLUT=yes],
[HAVE_GLUT=no])
if test "x$HAVE_GLUT" = xno ; then
# Try again with the GL libs
LIBS="-lglut $GL_LIBS"
AC_LINK_IFELSE(
[AC_LANG_CALL([],[glutInit])],
[HAVE_GLUT=yes],
[HAVE_GLUT=no])
fi
if test "x$HAVE_GLUT" = xno && test "x$GLUT_X_LIBS" != x ; then
# Try again with the GL and X11 libs
LIBS="-lglut $GL_LIBS $GLUT_X_LIBS"
AC_LINK_IFELSE(
[AC_LANG_CALL([],[glutInit])],
[HAVE_GLUT=yes],
[HAVE_GLUT=no])
fi
if test "x$HAVE_GLUT" = xyes ; then
AC_MSG_RESULT([yes])
GLUT_LIBS=$LIBS
else
AC_MSG_RESULT([no])
AC_MSG_WARN([GLUT libraries not availabe, example program won't be compiled.])
fi
# End check for GLUT libraries
fi
AC_SUBST(HAVE_GLUT)
AC_SUBST(GLUT_CFLAGS)
AC_SUBST(GLUT_LIBS)
AC_LANG_RESTORE
CPPFLAGS="$GLUT_SAVE_CPPFLAGS"
LIBS="$GLUT_SAVE_LIBS"
GLUT_X_CFLAGS=
GLUT_X_LIBS=
])
# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
# serial 46 AC_PROG_LIBTOOL
AC_DEFUN([AC_PROG_LIBTOOL],
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Prevent multiple expansion
define([AC_PROG_LIBTOOL], [])
])
AC_DEFUN([AC_LIBTOOL_SETUP],
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([LT_AC_PROG_SED])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
AC_REQUIRE([AC_OBJEXT])dnl
AC_REQUIRE([AC_EXEEXT])dnl
dnl
_LT_AC_PROG_ECHO_BACKSLASH
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
AC_PATH_MAGIC
fi
;;
esac
AC_CHECK_TOOL(RANLIB, ranlib, :)
AC_CHECK_TOOL(STRIP, strip, :)
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
enable_win32_dll=yes, enable_win32_dll=no)
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_SAVE
AC_LANG_C
AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_RESTORE])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
# recent cygwin and mingw systems supply a stub DllMain which the user
# can override, but on older systems we have to supply one
AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
[AC_TRY_LINK([],
[extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
DllMain (0, 0, 0);],
[lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
case $host/$CC in
*-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
# old mingw systems require "-dll" to link a DLL, while more recent ones
# require "-mdll"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -mdll"
AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
[AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
CFLAGS="$SAVE_CFLAGS" ;;
*-*-cygwin* | *-*-pw32*)
# cygwin systems need to pass --dll to the linker, and not link
# crt.o which will require a WinMain@16 definition.
lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
esac
;;
])
esac
_LT_AC_LTCONFIG_HACK
])
# AC_LIBTOOL_HEADER_ASSERT
# ------------------------
AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
[lt_cv_func_assert_works],
[case $host in
*-*-solaris*)
if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
case `$CC --version 2>/dev/null` in
[[12]].*) lt_cv_func_assert_works=no ;;
*) lt_cv_func_assert_works=yes ;;
esac
fi
;;
esac])
if test "x$lt_cv_func_assert_works" = xyes; then
AC_CHECK_HEADERS(assert.h)
fi
])# AC_LIBTOOL_HEADER_ASSERT
# _LT_AC_CHECK_DLFCN
# --------------------
AC_DEFUN([_LT_AC_CHECK_DLFCN],
[AC_CHECK_HEADERS(dlfcn.h)
])# _LT_AC_CHECK_DLFCN
# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
# ---------------------------------
AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
[AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_PROG_NM])
AC_REQUIRE([AC_OBJEXT])
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output])
AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix. What could be older than Ultrix?!! ;)]
# Character class describing NM global symbol codes.
symcode='[[BCDEGRST]]'
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'
# Transform an extracted symbol line into a proper C declaration
lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
# Define system-specific variables.
case $host_os in
aix*)
symcode='[[BCDT]]'
;;
cygwin* | mingw* | pw32*)
symcode='[[ABCDGISTW]]'
;;
hpux*) # Its linker distinguishes data from code symbols
lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
osf*)
symcode='[[BCDEGQRST]]'
;;
solaris* | sysv5*)
symcode='[[BDT]]'
;;
sysv4)
symcode='[[DFNSTU]]'
;;
esac
# Handle CRLF in mingw tool chain
opt_cr=
case $host_os in
mingw*)
opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
symcode='[[ABCDGISTW]]'
fi
# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do
# Write the raw and C identifiers.
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
nlist=conftest.nm
if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
else
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if egrep ' nm_test_var$' "$nlist" >/dev/null; then
if egrep ' nm_test_func$' "$nlist" >/dev/null; then
cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif
EOF
# Now generate the symbol file.
eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr void *
#else
# define lt_ptr char *
# define const
#endif
/* The mapping between symbol names and symbols. */
const struct {
const char *name;
lt_ptr address;
}
lt_preloaded_symbols[[]] =
{
EOF
sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
cat <<\EOF >> conftest.$ac_ext
{0, (lt_ptr) 0}
};
#ifdef __cplusplus
}
#endif
EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
save_LIBS="$LIBS"
save_CFLAGS="$CFLAGS"
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$no_builtin_flag"
if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS="$save_LIBS"
CFLAGS="$save_CFLAGS"
else
echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
fi
else
echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
fi
else
echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
fi
else
echo "$progname: failed program was:" >&AC_FD_CC
cat conftest.$ac_ext >&5
fi
rm -f conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test "$pipe_works" = yes; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
])
global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
if test -z "$lt_cv_sys_global_symbol_pipe"; then
global_symbol_to_cdecl=
global_symbol_to_c_name_address=
else
global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
fi
if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
then
AC_MSG_RESULT(failed)
else
AC_MSG_RESULT(ok)
fi
]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
# ---------------------------------
AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
[# Find the correct PATH separator. Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
UNAME=${UNAME-`uname 2>/dev/null`}
case X$UNAME in
*-DOS) lt_cv_sys_path_separator=';' ;;
*) lt_cv_sys_path_separator=':' ;;
esac
PATH_SEPARATOR=$lt_cv_sys_path_separator
fi
])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
# _LT_AC_PROG_ECHO_BACKSLASH
# --------------------------
# Add some code to the start of the generated configure script which
# will find an echo command which doesn't interpret backslashes.
AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
[AC_DIVERT_PUSH(NOTICE)])
_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
case X$ECHO in
X*--fallback-echo)
# Remove one level of quotation (which was required for Make).
ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
;;
esac
echo=${ECHO-echo}
if test "X[$]1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X[$]1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
# Yippee, $echo works!
:
else
# Restart under the correct shell.
exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
fi
if test "X[$]1" = X--fallback-echo; then
# used as fallback echo
shift
cat <<EOF
$*
EOF
exit 0
fi
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
if (echo_test_string="`eval $cmd`") 2>/dev/null &&
echo_test_string="`eval $cmd`" &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
fi
done
fi
if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
:
else
# The Solaris, AIX, and Digital Unix default echo programs unquote
# backslashes. This makes it impossible to quote backslashes using
# echo "$something" | sed 's/\\/\\\\/g'
#
# So, first we look for a working echo in the user's PATH.
IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for dir in $PATH /usr/ucb; do
if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
echo="$dir/echo"
break
fi
done
IFS="$save_ifs"
if test "X$echo" = Xecho; then
# We didn't find a better echo, so look for alternatives.
if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
# This shell has a builtin print -r that does the trick.
echo='print -r'
elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
test "X$CONFIG_SHELL" != X/bin/ksh; then
# If we have ksh, try running configure again with it.
ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
export ORIGINAL_CONFIG_SHELL
CONFIG_SHELL=/bin/ksh
export CONFIG_SHELL
exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
else
# Try using printf.
echo='printf %s\n'
if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
# Cool, printf works
:
elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
test "X$echo_testing_string" = 'X\t' &&
echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
export CONFIG_SHELL
SHELL="$CONFIG_SHELL"
export SHELL
echo="$CONFIG_SHELL [$]0 --fallback-echo"
elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
test "X$echo_testing_string" = 'X\t' &&
echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
echo="$CONFIG_SHELL [$]0 --fallback-echo"
else
# maybe with a smaller string...
prev=:
for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
then
break
fi
prev="$cmd"
done
if test "$prev" != 'sed 50q "[$]0"'; then
echo_test_string=`eval $prev`
export echo_test_string
exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
else
# Oops. We lost completely, so just stick with echo.
echo=echo
fi
fi
fi
fi
fi
fi
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
ECHO=$echo
if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
fi
AC_SUBST(ECHO)
AC_DIVERT_POP
])# _LT_AC_PROG_ECHO_BACKSLASH
# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
# ------------------------------------------------------------------
AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
[if test "$cross_compiling" = yes; then :
[$4]
else
AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
[#line __oline__ "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
x$lt_dlneed_uscore) $2 ;;
x$lt_unknown|x*) $3 ;;
esac
else :
# compilation failed
$3
fi
fi
rm -fr conftest*
])# _LT_AC_TRY_DLOPEN_SELF
# AC_LIBTOOL_DLOPEN_SELF
# -------------------
AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
[if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen="load_add_on"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
cygwin* | mingw* | pw32*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
;;
*)
AC_CHECK_FUNC([shl_load],
[lt_cv_dlopen="shl_load"],
[AC_CHECK_LIB([dld], [shl_load],
[lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
[AC_CHECK_FUNC([dlopen],
[lt_cv_dlopen="dlopen"],
[AC_CHECK_LIB([dl], [dlopen],
[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
[AC_CHECK_LIB([svld], [dlopen],
[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
[AC_CHECK_LIB([dld], [dld_link],
[lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
])
])
])
])
])
;;
esac
if test "x$lt_cv_dlopen" != xno; then
enable_dlopen=yes
else
enable_dlopen=no
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS="$CPPFLAGS"
AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
lt_cv_dlopen_self, [dnl
_LT_AC_TRY_DLOPEN_SELF(
lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
if test "x$lt_cv_dlopen_self" = xyes; then
LDFLAGS="$LDFLAGS $link_static_flag"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
_LT_AC_TRY_DLOPEN_SELF(
lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
])
fi
CPPFLAGS="$save_CPPFLAGS"
LDFLAGS="$save_LDFLAGS"
LIBS="$save_LIBS"
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
])# AC_LIBTOOL_DLOPEN_SELF
AC_DEFUN([_LT_AC_LTCONFIG_HACK],
[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Constants:
rm="rm -f"
# Global variables:
default_ofile=libtool
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"
need_locks="$enable_libtool_lock"
old_CC="$CC"
old_CFLAGS="$CFLAGS"
# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o
if test x"$host" != x"$build"; then
ac_tool_prefix=${host_alias}-
else
ac_tool_prefix=
fi
# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case $host_os in
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
openbsd*)
old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
;;
*)
old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
# Allow CC to be a program name with arguments.
set dummy $CC
compiler="[$]2"
AC_MSG_CHECKING([for objdir])
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
objdir=.libs
else
# MS-DOS does not allow filenames that begin with a dot.
objdir=_libs
fi
rmdir .libs 2>/dev/null
AC_MSG_RESULT($objdir)
AC_ARG_WITH(pic,
[ --with-pic try to use only PIC/non-PIC objects [default=use both]],
pic_mode="$withval", pic_mode=default)
test -z "$pic_mode" && pic_mode=default
# We assume here that the value for lt_cv_prog_cc_pic will not be cached
# in isolation, and that seeing it set (from the cache) indicates that
# the associated values are set (in the cache) correctly too.
AC_MSG_CHECKING([for $compiler option to produce PIC])
AC_CACHE_VAL(lt_cv_prog_cc_pic,
[ lt_cv_prog_cc_pic=
lt_cv_prog_cc_shlib=
lt_cv_prog_cc_wl=
lt_cv_prog_cc_static=
lt_cv_prog_cc_no_builtin=
lt_cv_prog_cc_can_build_shared=$can_build_shared
if test "$GCC" = yes; then
lt_cv_prog_cc_wl='-Wl,'
lt_cv_prog_cc_static='-static'
case $host_os in
aix*)
# Below there is a dirty hack to force normal static linking with -ldl
# The problem is because libdl dynamically linked with both libc and
# libC (AIX C++ library), which obviously doesn't included in libraries
# list by gcc. This cause undefined symbols with -static flags.
# This hack allows C programs to be linked with "-static -ldl", but
# not sure about C++ programs.
lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
;;
amigaos*)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the `-m68020' flag to GCC prevents building anything better,
# like `-m68040'.
lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
;;
beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
lt_cv_prog_cc_pic='-fno-common'
;;
cygwin* | mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_cv_prog_cc_pic='-DDLL_EXPORT'
;;
sysv4*MP*)
if test -d /usr/nec; then
lt_cv_prog_cc_pic=-Kconform_pic
fi
;;
*)
lt_cv_prog_cc_pic='-fPIC'
;;
esac
else
# PORTME Check for PIC flags for the system compiler.
case $host_os in
aix3* | aix4* | aix5*)
lt_cv_prog_cc_wl='-Wl,'
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_cv_prog_cc_static='-Bstatic'
else
lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
hpux9* | hpux10* | hpux11*)
# Is there a better lt_cv_prog_cc_static that works with the bundled CC?
lt_cv_prog_cc_wl='-Wl,'
lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
lt_cv_prog_cc_pic='+Z'
;;
irix5* | irix6* | nonstopux*)
lt_cv_prog_cc_wl='-Wl,'
lt_cv_prog_cc_static='-non_shared'
# PIC (with -KPIC) is the default.
;;
cygwin* | mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_cv_prog_cc_pic='-DDLL_EXPORT'
;;
newsos6)
lt_cv_prog_cc_pic='-KPIC'
lt_cv_prog_cc_static='-Bstatic'
;;
osf3* | osf4* | osf5*)
# All OSF/1 code is PIC.
lt_cv_prog_cc_wl='-Wl,'
lt_cv_prog_cc_static='-non_shared'
;;
sco3.2v5*)
lt_cv_prog_cc_pic='-Kpic'
lt_cv_prog_cc_static='-dn'
lt_cv_prog_cc_shlib='-belf'
;;
solaris*)
lt_cv_prog_cc_pic='-KPIC'
lt_cv_prog_cc_static='-Bstatic'
lt_cv_prog_cc_wl='-Wl,'
;;
sunos4*)
lt_cv_prog_cc_pic='-PIC'
lt_cv_prog_cc_static='-Bstatic'
lt_cv_prog_cc_wl='-Qoption ld '
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
lt_cv_prog_cc_pic='-KPIC'
lt_cv_prog_cc_static='-Bstatic'
lt_cv_prog_cc_wl='-Wl,'
;;
uts4*)
lt_cv_prog_cc_pic='-pic'
lt_cv_prog_cc_static='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
lt_cv_prog_cc_pic='-Kconform_pic'
lt_cv_prog_cc_static='-Bstatic'
fi
;;
*)
lt_cv_prog_cc_can_build_shared=no
;;
esac
fi
])
if test -z "$lt_cv_prog_cc_pic"; then
AC_MSG_RESULT([none])
else
AC_MSG_RESULT([$lt_cv_prog_cc_pic])
# Check to make sure the pic_flag actually works.
AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
AC_TRY_COMPILE([], [], [dnl
case $host_os in
hpux9* | hpux10* | hpux11*)
# On HP-UX, both CC and GCC only warn that PIC is supported... then
# they create non-PIC objects. So, if there were any warnings, we
# assume that PIC is not supported.
if test -s conftest.err; then
lt_cv_prog_cc_pic_works=no
else
lt_cv_prog_cc_pic_works=yes
fi
;;
*)
lt_cv_prog_cc_pic_works=yes
;;
esac
], [dnl
lt_cv_prog_cc_pic_works=no
])
CFLAGS="$save_CFLAGS"
])
if test "X$lt_cv_prog_cc_pic_works" = Xno; then
lt_cv_prog_cc_pic=
lt_cv_prog_cc_can_build_shared=no
else
lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
fi
AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
fi
# Check for any special shared library compilation flags.
if test -n "$lt_cv_prog_cc_shlib"; then
AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then :
else
AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
lt_cv_prog_cc_can_build_shared=no
fi
fi
AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
lt_cv_prog_cc_static_works=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
LDFLAGS="$save_LDFLAGS"
])
# Belt *and* braces to stop my trousers falling down:
test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
AC_MSG_RESULT([$lt_cv_prog_cc_static_works])
pic_flag="$lt_cv_prog_cc_pic"
special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
wl="$lt_cv_prog_cc_wl"
link_static_flag="$lt_cv_prog_cc_static"
no_builtin_flag="$lt_cv_prog_cc_no_builtin"
can_build_shared="$lt_cv_prog_cc_can_build_shared"
# Check to see if options -o and -c are simultaneously supported by compiler
AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])
AC_CACHE_VAL([lt_cv_compiler_c_o], [
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
echo "int some_variable = 0;" > conftest.$ac_ext
mkdir out
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory. Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
compiler_c_o=no
if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s out/conftest.err; then
lt_cv_compiler_c_o=no
else
lt_cv_compiler_c_o=yes
fi
else
# Append any errors to the config.log.
cat out/conftest.err 1>&AC_FD_CC
lt_cv_compiler_c_o=no
fi
CFLAGS="$save_CFLAGS"
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm -r conftest 2>/dev/null
])
compiler_c_o=$lt_cv_compiler_c_o
AC_MSG_RESULT([$compiler_c_o])
if test x"$compiler_c_o" = x"yes"; then
# Check to see if we can write to a .lo
AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
AC_CACHE_VAL([lt_cv_compiler_o_lo], [
lt_cv_compiler_o_lo=no
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -c -o conftest.lo"
save_objext="$ac_objext"
ac_objext=lo
AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
lt_cv_compiler_o_lo=no
else
lt_cv_compiler_o_lo=yes
fi
])
ac_objext="$save_objext"
CFLAGS="$save_CFLAGS"
])
compiler_o_lo=$lt_cv_compiler_o_lo
AC_MSG_RESULT([$compiler_o_lo])
else
compiler_o_lo=no
fi
# Check to see if we can do hard links to lock some files if needed
hard_links="nottested"
if test "$compiler_c_o" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
$rm conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
if test "$hard_links" = no; then
AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
need_locks=warn
fi
else
need_locks=no
fi
if test "$GCC" = yes; then
# Check to see if options -fno-rtti -fno-exceptions are supported by compiler
AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
echo "int some_variable = 0;" > conftest.$ac_ext
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
compiler_rtti_exceptions=no
AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
compiler_rtti_exceptions=no
else
compiler_rtti_exceptions=yes
fi
])
CFLAGS="$save_CFLAGS"
AC_MSG_RESULT([$compiler_rtti_exceptions])
if test "$compiler_rtti_exceptions" = "yes"; then
no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
else
no_builtin_flag=' -fno-builtin'
fi
fi
# See if the linker supports building shared libraries.
AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])
allow_undefined_flag=
no_undefined_flag=
need_lib_prefix=unknown
need_version=unknown
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
archive_cmds=
archive_expsym_cmds=
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_into_libs=no
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
runpath_var=
link_all_deplibs=unknown
always_export_symbols=no
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an egrep regular expression of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test "$GCC" != yes; then
with_gnu_ld=no
fi
;;
openbsd*)
with_gnu_ld=no
;;
esac
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
# On AIX, the GNU linker is very broken
# Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
ld_shlibs=no
cat <<EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
EOF
;;
amigaos*)
archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
# Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
# that the semantics of dynamic libraries on AmigaOS, at least up
# to version 4, is to share data among multiple programs linked
# with the same dynamic library. Since this doesn't match the
# behavior of shared libraries on other platforms, we can use
# them.
ld_shlibs=no
;;
beos*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
;;
cygwin* | mingw* | pw32*)
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
allow_undefined_flag=unsupported
always_export_symbols=yes
extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
test -f $output_objdir/impgen.exe || (cd $output_objdir && \
if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
else $CC -o impgen impgen.c ; fi)~
$output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
# cygwin and mingw dlls have different entry points and sets of symbols
# to exclude.
# FIXME: what about values for MSVC?
dll_entry=__cygwin_dll_entry@12
dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
case $host_os in
mingw*)
# mingw values
dll_entry=_DllMainCRTStartup@12
dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
;;
esac
# mingw and cygwin differ, and it's simplest to just exclude the union
# of the two symbol sets.
dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
# recent cygwin and mingw systems supply a stub DllMain which the user
# can override, but on older systems we have to supply one (in ltdll.c)
if test "x$lt_cv_need_dllmain" = "xyes"; then
ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
else
ltdll_obj=
ltdll_cmds=
fi
# Extract the symbol export list from an `--export-all' def file,
# then regenerate the def file from the symbol export list, so that
# the compiled dll only exports the symbol export list.
# Be careful not to strip the DATA tag left be newer dlltools.
export_symbols_cmds="$ltdll_cmds"'
$DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is.
# If DATA tags from a recent dlltool are present, honour them!
archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname-def;
else
echo EXPORTS > $output_objdir/$soname-def;
_lt_hint=1;
cat $export_symbols | while read symbol; do
set dummy \$symbol;
case \[$]# in
2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
4) echo " \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
*) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
esac;
_lt_hint=`expr 1 + \$_lt_hint`;
done;
fi~
'"$ltdll_cmds"'
$CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
$CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
$DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
$CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris* | sysv5*)
if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
cat <<EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
EOF
elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
sunos4*)
archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
if test "$ld_shlibs" = yes; then
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec='${wl}--export-dynamic'
case $host_os in
cygwin* | mingw* | pw32*)
# dlltool doesn't understand --whole-archive et. al.
whole_archive_flag_spec=
;;
*)
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
whole_archive_flag_spec=
fi
;;
esac
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
allow_undefined_flag=unsupported
always_export_symbols=yes
archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
if test "$GCC" = yes && test -z "$link_static_flag"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
fi
;;
aix4* | aix5*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=""
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
*-brtl*)
aix_use_runtimelinking=yes
break
;;
esac
done
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
hardcode_direct=yes
archive_cmds=''
hardcode_libdir_separator=':'
if test "$GCC" = yes; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" && \
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct=yes
else
# We have old collect2
hardcode_direct=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
hardcode_minus_L=yes
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
esac
shared_flag='-shared'
else
# not using gcc
if test "$host_cpu" = ia64; then
shared_flag='${wl}-G'
else
if test "$aix_use_runtimelinking" = yes; then
shared_flag='${wl}-G'
else
shared_flag='${wl}-bM:SRE'
fi
fi
fi
# It seems that -bexpall can do strange things, so it is better to
# generate a list of symbols to export.
always_export_symbols=yes
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='${wl}-berok'
# This is a bit strange, but is similar to how AIX traditionally builds
# it's shared libraries.
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
amigaos*)
archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
# see comment about different semantics on the GNU ld section
ld_shlibs=no
;;
cygwin* | mingw* | pw32*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec=' '
allow_undefined_flag=unsupported
# Tell ltmain to make .lib files, not .a files.
libext=lib
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
old_archive_from_new_cmds='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path='`cygpath -w "$srcfile"`'
;;
darwin* | rhapsody*)
case "$host_os" in
rhapsody* | darwin1.[[012]])
allow_undefined_flag='-undefined suppress'
;;
*) # Darwin 1.3 on
allow_undefined_flag='-flat_namespace -undefined suppress'
;;
esac
# FIXME: Relying on posixy $() will cause problems for
# cross-compilation, but unfortunately the echo tests do not
# yet detect zsh echo's removal of \ escapes. Also zsh mangles
# `"' quotes if we put them in here... so don't!
archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
# We need to add '_' to the symbols in $export_symbols first
#archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
hardcode_direct=yes
hardcode_shlibpath_var=no
whole_archive_flag_spec='-all_load $convenience'
;;
freebsd1*)
ld_shlibs=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd*)
archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
hpux9* | hpux10* | hpux11*)
case $host_os in
hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
*) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
esac
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_minus_L=yes # Not in the search PATH, but as the default
# location of the library.
export_dynamic_flag_spec='${wl}-E'
;;
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='-rpath $libdir'
fi
hardcode_libdir_separator=:
link_all_deplibs=yes
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
openbsd*)
hardcode_direct=yes
hardcode_shlibpath_var=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
export_dynamic_flag_spec='${wl}-E'
else
case "$host_os" in
openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-R$libdir'
;;
*)
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
esac
fi
;;
os2*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
fi
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
#Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
fi
hardcode_libdir_separator=:
;;
sco3.2v5*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
export_dynamic_flag_spec='${wl}-Bexport'
;;
solaris*)
# gcc --version < 3.0 without binutils cannot create self contained
# shared libraries reliably, requiring libgcc.a to resolve some of
# the object symbols generated in some cases. Libraries that use
# assert need libgcc.a to resolve __eprintf, for example. Linking
# a copy of libgcc.a into every shared library to guarantee resolving
# such symbols causes other problems: According to Tim Van Holder
# <tim.van.holder@pandora.be>, C++ libraries end up with a separate
# (to the application) exception stack for one thing.
no_undefined_flag=' -z defs'
if test "$GCC" = yes; then
case `$CC --version 2>/dev/null` in
[[12]].*)
cat <<EOF 1>&2
*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
*** create self contained shared libraries on Solaris systems, without
*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
*** -no-undefined support, which will at least allow you to build shared
*** libraries. However, you may find that when you link such libraries
*** into an application without using GCC, you have to manually add
*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
*** upgrade to a newer version of GCC. Another option is to rebuild your
*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
EOF
no_undefined_flag=
;;
esac
fi
# $CC -shared without GNU ld will not create a library from C++
# object files and a static libstdc++, better avoid it by now
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_shlibpath_var=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*) # Supported since Solaris 2.6 (maybe 2.5.1?)
whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
esac
link_all_deplibs=yes
;;
sunos4*)
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
sysv4)
case $host_vendor in
sni)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
reload_cmds='$CC -r -o $output$reload_objs'
hardcode_direct=no
;;
motorola)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
;;
sysv4.3*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
export_dynamic_flag_spec='-Bexport'
;;
sysv5*)
no_undefined_flag=' -z text'
# $CC -shared without GNU ld will not create a library from C++
# object files and a static libstdc++, better avoid it by now
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
hardcode_libdir_flag_spec=
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
;;
uts4*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
dgux*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
sysv4*MP*)
if test -d /usr/nec; then
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
ld_shlibs=yes
fi
;;
sysv4.2uw2*)
archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=no
hardcode_shlibpath_var=no
hardcode_runpath_var=yes
runpath_var=LD_RUN_PATH
;;
sysv5uw7* | unixware7*)
no_undefined_flag='${wl}-z ${wl}text'
if test "$GCC" = yes; then
archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
;;
*)
ld_shlibs=no
;;
esac
fi
AC_MSG_RESULT([$ld_shlibs])
test "$ld_shlibs" = no && can_build_shared=no
# Check hardcoding attributes.
AC_MSG_CHECKING([how to hardcode library paths into programs])
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
test -n "$runpath_var"; then
# We can hardcode non-existant directories.
if test "$hardcode_direct" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test "$hardcode_shlibpath_var" != no &&
test "$hardcode_minus_L" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
hardcode_action=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
hardcode_action=unsupported
fi
AC_MSG_RESULT([$hardcode_action])
striplib=
old_striplib=
AC_MSG_CHECKING([whether stripping libraries is possible])
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
reload_cmds='$LD$reload_flag -o $output$reload_objs'
test -z "$deplibs_check_method" && deplibs_check_method=unknown
# PORTME Fill in your ld.so characteristics
AC_MSG_CHECKING([dynamic linker characteristics])
library_names_spec=
libname_spec='lib$name'
soname_spec=
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
case $host_os in
aix3*)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX has no versioning support, so we append a major version to the name.
soname_spec='${libname}${release}.so$major'
;;
aix4* | aix5*)
version_type=linux
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test "$host_cpu" = ia64; then
# AIX 5 supports IA64
library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line `#! .'. This would cause the generated library to
# depend on `.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# AIX (on Power*) has no versioning support, so currently we can
# not hardcode correct soname into executable. Probably we can
# add versioning support to collect2, so additional links can
# be useful in future.
if test "$aix_use_runtimelinking" = yes; then
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
else
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='${libname}${release}.a $libname.a'
soname_spec='${libname}${release}.so$major'
fi
shlibpath_var=LIBPATH
fi
hardcode_into_libs=yes
;;
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
;;
beos*)
library_names_spec='${libname}.so'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi4*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
export_dynamic_flag_spec=-rdynamic
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32*)
version_type=windows
need_version=no
need_lib_prefix=no
case $GCC,$host_os in
yes,cygwin*)
library_names_spec='$libname.dll.a'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog .libs/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
;;
yes,mingw*)
library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
;;
yes,pw32*)
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
;;
*)
library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
;;
esac
dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
# FIXME: Relying on posixy $() will cause problems for
# cross-compilation, but unfortunately the echo tests do not
# yet detect zsh echo's removal of \ escapes.
library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
;;
freebsd1*)
dynamic_linker=no
;;
freebsd*-gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='GNU/FreeBSD ld.so'
;;
freebsd*)
objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2*)
shlibpath_overrides_runpath=yes
;;
*)
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
esac
;;
gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
dynamic_linker="$host_os dld.sl"
version_type=sunos
need_lib_prefix=no
need_version=no
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
soname_spec='${libname}${release}.sl$major'
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*) version_type=irix ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}.so$major'
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
;;
# No shared lib support for Linux oldld, aout, or coff.
linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
dynamic_linker=no
;;
# This must be Linux ELF.
linux-gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
soname_spec='${libname}${release}.so$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
openbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case "$host_os" in
openbsd2.[[89]] | openbsd2.[[89]].*)
shlibpath_overrides_runpath=no
;;
*)
shlibpath_overrides_runpath=yes
;;
esac
else
shlibpath_overrides_runpath=yes
fi
library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
;;
os2*)
libname_spec='$name'
need_lib_prefix=no
library_names_spec='$libname.dll $libname.a'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=LIBPATH
;;
osf3* | osf4* | osf5*)
version_type=osf
need_version=no
need_lib_prefix=no
soname_spec='${libname}${release}.so$major'
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
hardcode_into_libs=yes
;;
sco3.2v5*)
version_type=osf
soname_spec='${libname}${release}.so$major'
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
shlibpath_var=LD_LIBRARY_PATH
;;
solaris*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test "$with_gnu_ld" = yes; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
uts4*)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
;;
dgux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
;;
sysv4*MP*)
if test -d /usr/nec ;then
version_type=linux
library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
soname_spec='$libname.so.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
*)
dynamic_linker=no
;;
esac
AC_MSG_RESULT([$dynamic_linker])
test "$dynamic_linker" = no && can_build_shared=no
# Report the final consequences.
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
AC_MSG_RESULT([$enable_static])
if test "$hardcode_action" = relink; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
test "$enable_shared" = no; then
# Fast installation is not necessary
enable_fast_install=needless
fi
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
AC_LIBTOOL_DLOPEN_SELF
if test "$enable_shared" = yes && test "$GCC" = yes; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
AC_MSG_CHECKING([whether -lc should be explicitly linked in])
AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
[$rm conftest*
echo 'static int dummy;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$lt_cv_prog_cc_wl
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
save_allow_undefined_flag=$allow_undefined_flag
allow_undefined_flag=
if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
then
lt_cv_archive_cmds_need_lc=no
else
lt_cv_archive_cmds_need_lc=yes
fi
allow_undefined_flag=$save_allow_undefined_flag
else
cat conftest.err 1>&5
fi])
AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
;;
esac
fi
need_lc=${lt_cv_archive_cmds_need_lc-yes}
# The second clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
:
else
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
test -f Makefile && make "$ltmain"
fi
if test -f "$ltmain"; then
trap "$rm \"${ofile}T\"; exit 1" 1 2 15
$rm -f "${ofile}T"
echo creating $ofile
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
for var in echo old_CC old_CFLAGS SED \
AR AR_FLAGS CC LD LN_S NM SHELL \
reload_flag reload_cmds wl \
pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
thread_safe_flag_spec whole_archive_flag_spec libname_spec \
library_names_spec soname_spec \
RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
old_striplib striplib file_magic_cmd export_symbols_cmds \
deplibs_check_method allow_undefined_flag no_undefined_flag \
finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
global_symbol_to_c_name_address \
hardcode_libdir_flag_spec hardcode_libdir_separator \
sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
case $var in
reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
old_postinstall_cmds | old_postuninstall_cmds | \
export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
postinstall_cmds | postuninstall_cmds | \
finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
# Double-quote double-evaled strings.
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
;;
esac
done
cat <<__EOF__ > "${ofile}T"
#! $SHELL
# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996-2000 Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# A sed that does not truncate output.
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="${SED} -e s/^X//"
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
# ### BEGIN LIBTOOL CONFIG
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$need_lc
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# The host system.
host_alias=$host_alias
host=$host
# An echo program that does not interpret backslashes.
echo=$lt_echo
# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS
# The default C compiler.
CC=$lt_CC
# Is the compiler the GNU C compiler?
with_gcc=$GCC
# The linker used to build libraries.
LD=$lt_LD
# Whether we need hard or soft links.
LN_S=$lt_LN_S
# A BSD-compatible nm program.
NM=$lt_NM
# A symbol stripping program
STRIP=$STRIP
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"
# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"
# Used on cygwin: assembler.
AS="$AS"
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# How to pass a linker flag through the compiler.
wl=$lt_wl
# Object file suffix (normally "o").
objext="$ac_objext"
# Old archive suffix (normally "a").
libext="$libext"
# Executable file suffix (normally "").
exeext="$exeext"
# Additional compiler flags for building library objects.
pic_flag=$lt_pic_flag
pic_mode=$pic_mode
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_compiler_c_o
# Can we write directly to a .lo ?
compiler_o_lo=$lt_compiler_o_lo
# Must we lock files when doing compilation ?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_link_static_flag
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_no_builtin_flag
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec
# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec
# Library versioning type.
version_type=$version_type
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag
# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_global_symbol_pipe
# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
# This is the shared library runtime path variable.
runpath_var=$runpath_var
# This is the shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L
# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var
# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms
# ### END LIBTOOL CONFIG
__EOF__
case $host_os in
aix3*)
cat <<\EOF >> "${ofile}T"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
EOF
;;
esac
case $host_os in
cygwin* | mingw* | pw32* | os2*)
cat <<'EOF' >> "${ofile}T"
# This is a source program that is used to create dlls on Windows
# Don't remove nor modify the starting and closing comments
# /* ltdll.c starts here */
# #define WIN32_LEAN_AND_MEAN
# #include <windows.h>
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
# #ifndef __CYGWIN__
# # ifdef __CYGWIN32__
# # define __CYGWIN__ __CYGWIN32__
# # endif
# #endif
#
# #ifdef __cplusplus
# extern "C" {
# #endif
# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
# #ifdef __cplusplus
# }
# #endif
#
# #ifdef __CYGWIN__
# #include <cygwin/cygwin_dll.h>
# DECLARE_CYGWIN_DLL( DllMain );
# #endif
# HINSTANCE __hDllInstance_base;
#
# BOOL APIENTRY
# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
# {
# __hDllInstance_base = hInst;
# return TRUE;
# }
# /* ltdll.c ends here */
# This is a source program that is used to create import libraries
# on Windows for dlls which lack them. Don't remove nor modify the
# starting and closing comments
# /* impgen.c starts here */
# /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
#
# This file is part of GNU libtool.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# */
#
# #include <stdio.h> /* for printf() */
# #include <unistd.h> /* for open(), lseek(), read() */
# #include <fcntl.h> /* for O_RDONLY, O_BINARY */
# #include <string.h> /* for strdup() */
#
# /* O_BINARY isn't required (or even defined sometimes) under Unix */
# #ifndef O_BINARY
# #define O_BINARY 0
# #endif
#
# static unsigned int
# pe_get16 (fd, offset)
# int fd;
# int offset;
# {
# unsigned char b[2];
# lseek (fd, offset, SEEK_SET);
# read (fd, b, 2);
# return b[0] + (b[1]<<8);
# }
#
# static unsigned int
# pe_get32 (fd, offset)
# int fd;
# int offset;
# {
# unsigned char b[4];
# lseek (fd, offset, SEEK_SET);
# read (fd, b, 4);
# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# static unsigned int
# pe_as32 (ptr)
# void *ptr;
# {
# unsigned char *b = ptr;
# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
# }
#
# int
# main (argc, argv)
# int argc;
# char *argv[];
# {
# int dll;
# unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
# unsigned long export_rva, export_size, nsections, secptr, expptr;
# unsigned long name_rvas, nexp;
# unsigned char *expdata, *erva;
# char *filename, *dll_name;
#
# filename = argv[1];
#
# dll = open(filename, O_RDONLY|O_BINARY);
# if (dll < 1)
# return 1;
#
# dll_name = filename;
#
# for (i=0; filename[i]; i++)
# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':')
# dll_name = filename + i +1;
#
# pe_header_offset = pe_get32 (dll, 0x3c);
# opthdr_ofs = pe_header_offset + 4 + 20;
# num_entries = pe_get32 (dll, opthdr_ofs + 92);
#
# if (num_entries < 1) /* no exports */
# return 1;
#
# export_rva = pe_get32 (dll, opthdr_ofs + 96);
# export_size = pe_get32 (dll, opthdr_ofs + 100);
# nsections = pe_get16 (dll, pe_header_offset + 4 +2);
# secptr = (pe_header_offset + 4 + 20 +
# pe_get16 (dll, pe_header_offset + 4 + 16));
#
# expptr = 0;
# for (i = 0; i < nsections; i++)
# {
# char sname[8];
# unsigned long secptr1 = secptr + 40 * i;
# unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
# unsigned long vsize = pe_get32 (dll, secptr1 + 16);
# unsigned long fptr = pe_get32 (dll, secptr1 + 20);
# lseek(dll, secptr1, SEEK_SET);
# read(dll, sname, 8);
# if (vaddr <= export_rva && vaddr+vsize > export_rva)
# {
# expptr = fptr + (export_rva - vaddr);
# if (export_rva + export_size > vaddr + vsize)
# export_size = vsize - (export_rva - vaddr);
# break;
# }
# }
#
# expdata = (unsigned char*)malloc(export_size);
# lseek (dll, expptr, SEEK_SET);
# read (dll, expdata, export_size);
# erva = expdata - export_rva;
#
# nexp = pe_as32 (expdata+24);
# name_rvas = pe_as32 (expdata+32);
#
# printf ("EXPORTS\n");
# for (i = 0; i<nexp; i++)
# {
# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
# }
#
# return 0;
# }
# /* impgen.c ends here */
EOF
;;
esac
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
mv -f "${ofile}T" "$ofile" || \
(rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
chmod +x "$ofile"
fi
])# _LT_AC_LTCONFIG_HACK
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN([AC_ENABLE_SHARED],
[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN([AC_DISABLE_SHARED],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN([AC_ENABLE_STATIC],
[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN([AC_DISABLE_STATIC],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN([AC_ENABLE_FAST_INSTALL],
[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN([AC_DISABLE_FAST_INSTALL],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_LIBTOOL_PICMODE - implement the --with-pic flag
# Usage: AC_LIBTOOL_PICMODE[(MODE)]
# Where MODE is either `yes' or `no'. If omitted, it defaults to
# `both'.
AC_DEFUN([AC_LIBTOOL_PICMODE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
pic_mode=ifelse($#,1,$1,default)])
# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
AC_DEFUN([AC_PATH_TOOL_PREFIX],
[AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
/*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
?:/*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
;;
*)
ac_save_MAGIC_CMD="$MAGIC_CMD"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="ifelse([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$1; then
lt_cv_path_MAGIC_CMD="$ac_dir/$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
egrep "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
EOF
fi ;;
esac
fi
break
fi
done
IFS="$ac_save_ifs"
MAGIC_CMD="$ac_save_MAGIC_CMD"
;;
esac])
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
AC_MSG_RESULT(no)
fi
])
# AC_PATH_MAGIC - find a file program which can recognise a shared library
AC_DEFUN([AC_PATH_MAGIC],
[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
else
MAGIC_CMD=:
fi
fi
])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN([AC_PROG_LD],
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]]* | [[A-Za-z]]:[[\\/]]*)
re_direlt='/[[^/]][[^/]]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$lt_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
# AC_PROG_LD_GNU -
AC_DEFUN([AC_PROG_LD_GNU],
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
lt_cv_prog_gnu_ld=yes
else
lt_cv_prog_gnu_ld=no
fi])
with_gnu_ld=$lt_cv_prog_gnu_ld
])
# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
# -- PORTME Some linkers may need a different reload flag.
AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
[lt_cv_ld_reload_flag='-r'])
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"
])
# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
# -- PORTME fill in with the dynamic library characteristics
AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
[AC_CACHE_CHECK([how to recognise dependent libraries],
lt_cv_deplibs_check_method,
[lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.
case $host_os in
aix4* | aix5*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi4*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin* | mingw* | pw32*)
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
lt_cv_file_magic_cmd='$OBJDUMP -f'
;;
darwin* | rhapsody*)
lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
lt_cv_file_magic_cmd='/usr/bin/file -L'
case "$host_os" in
rhapsody* | darwin1.[[012]])
lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
;;
*) # Darwin 1.3 on
lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
;;
esac
;;
freebsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
gnu*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20*|hpux11*)
lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
irix5* | irix6* | nonstopux*)
case $host_os in
irix5* | nonstopux*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
;;
*)
case $LD in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
;;
esac
lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
lt_cv_deplibs_check_method=pass_all
;;
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*)
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
esac
lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
fi
;;
newos6*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
openbsd*)
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
else
lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
fi
;;
osf3* | osf4* | osf5*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
lt_cv_file_magic_test_file=/shlib/libc.so
lt_cv_deplibs_check_method=pass_all
;;
sco3.2v5*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_test_file=/lib/libc.so
;;
sysv5uw[[78]]* | sysv4*uw2*)
lt_cv_deplibs_check_method=pass_all
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
ncr)
lt_cv_deplibs_check_method=pass_all
;;
sequent)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
;;
sni)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
lt_cv_file_magic_test_file=/lib/libc.so
;;
siemens)
lt_cv_deplibs_check_method=pass_all
;;
esac
;;
esac
])
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN([AC_PROG_NM],
[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
tmp_nm=$ac_dir/${ac_tool_prefix}nm
if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
lt_cv_path_NM="$tmp_nm -B"
break
elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
lt_cv_path_NM="$tmp_nm -p"
break
else
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi])
NM="$lt_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN([AC_CHECK_LIBM],
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case $host in
*-*-beos* | *-*-cygwin* | *-*-pw32*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and LTDLINCL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments. Note that LIBLTDL and LTDLINCL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
# with '${top_builddir}/' and LTDLINCL will be prefixed with
# '${top_srcdir}/' (note the single quotes!). If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case $enable_ltdl_convenience in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
# For backwards non-gettext consistent compatibility...
INCLTDL="$LTDLINCL"
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and LTDLINCL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
# with '${top_srcdir}/' (note the single quotes!). If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
LTDLINCL=
fi
# For backwards non-gettext consistent compatibility...
INCLTDL="$LTDLINCL"
])
# old names
AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
# This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
# LT_AC_PROG_SED
# --------------
# Check for a fully-functional sed program, that truncates
# as few characters as possible. Prefer GNU sed if found.
AC_DEFUN([LT_AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_executable_p="test -f"
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
_sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
fi
done
done
done
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
: ${TMPDIR=/tmp}
{
tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
tmp=$TMPDIR/sed$$-$RANDOM
(umask 077 && mkdir $tmp)
} ||
{
echo "$me: cannot create a temporary directory in $TMPDIR" >&2
{ (exit 1); exit 1; }
}
_max=0
_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for _sed in $_sed_list /usr/xpg4/bin/sed; do
test ! -f ${_sed} && break
cat /dev/null > "$tmp/sed.in"
_count=0
echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
# Check for GNU sed and select it if it is found.
if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
lt_cv_path_SED=${_sed}
break
fi
while true; do
cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
mv "$tmp/sed.tmp" "$tmp/sed.in"
cp "$tmp/sed.in" "$tmp/sed.nl"
echo >>"$tmp/sed.nl"
${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
# 40000 chars as input seems more than enough
test $_count -gt 10 && break
_count=`expr $_count + 1`
if test $_count -gt $_max; then
_max=$_count
lt_cv_path_SED=$_sed
fi
done
done
rm -rf "$tmp"
])
if test "X$SED" != "X"; then
lt_cv_path_SED=$SED
else
SED=$lt_cv_path_SED
fi
AC_MSG_RESULT([$SED])
])
