kc3-lang/harfbuzz/src/hb-outline.cc

• Show log

  Commit

• Hash : 1a9e2175
  Author :
  Date : 2025-04-22T19:52:21
  

  [font/draw] Move slanting to font layer
  
  I moved it to the draw layer in 11.0.0; That was a bad design:
  font-funcs should NOT be responsible for synthetic bold & slant.
  
  This design reverts that and makes the font layer apply it,
  using a recording.
  
  This is a minor API change from 11.0.0 since hb_draw_state_t::slant_xy
  which was introduced in 11.0.0, is removed now. I believe no client
  had started using it. It was only relevant to other font-funcs draw
  implementations.
  

Download

• src/hb-outline.cc

• /*
   * Copyright © 2023  Behdad Esfahbod
   * Copyright © 1999  David Turner
   * Copyright © 2005  Werner Lemberg
   * Copyright © 2013-2015  Alexei Podtelezhnikov
   *
   *  This is part of HarfBuzz, a text shaping library.
   *
   * Permission is hereby granted, without written agreement and without
   * license or royalty fees, to use, copy, modify, and distribute this
   * software and its documentation for any purpose, provided that the
   * above copyright notice and the following two paragraphs appear in
   * all copies of this software.
   *
   * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR
   * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
   * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN
   * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
   * DAMAGE.
   *
   * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
   * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
   * FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
   * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO
   * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
   */
  
  #include "hb.hh"
  
  #ifndef HB_NO_OUTLINE
  
  #include "hb-outline.hh"
  
  #include "hb-machinery.hh"
  
  
  void hb_outline_t::replay (hb_draw_funcs_t *pen, void *pen_data) const
  {
    hb_draw_state_t st = HB_DRAW_STATE_DEFAULT;
  
    unsigned first = 0;
    for (unsigned contour : contours)
    {
      auto it = points.as_array ().sub_array (first, contour - first);
      while (it)
      {
        hb_outline_point_t p1 = *it++;
        switch (p1.type)
        {
  	case hb_outline_point_t::type_t::MOVE_TO:
  	{
  	  pen->move_to (pen_data, st,
  			   p1.x, p1.y);
  	}
  	break;
  	case hb_outline_point_t::type_t::LINE_TO:
  	{
  	  pen->line_to (pen_data, st,
  			   p1.x, p1.y);
  	}
  	break;
  	case hb_outline_point_t::type_t::QUADRATIC_TO:
  	{
  	  hb_outline_point_t p2 = *it++;
  	  pen->quadratic_to (pen_data, st,
  				p1.x, p1.y,
  				p2.x, p2.y);
  	}
  	break;
  	case hb_outline_point_t::type_t::CUBIC_TO:
  	{
  	  hb_outline_point_t p2 = *it++;
  	  hb_outline_point_t p3 = *it++;
  	  pen->cubic_to (pen_data, st,
  			    p1.x, p1.y,
  			    p2.x, p2.y,
  			    p3.x, p3.y);
  	}
  	break;
        }
      }
      pen->close_path (pen_data, st);
      first = contour;
    }
  }
  
  void hb_outline_t::slant (float slant_xy)
  {
    for (auto &p : points)
      p.x += slant_xy * p.y;
  }
  
  float hb_outline_t::control_area () const
  {
    float a = 0;
    unsigned first = 0;
    for (unsigned contour : contours)
    {
      for (unsigned i = first; i < contour; i++)
      {
        unsigned j = i + 1 < contour ? i + 1 : first;
  
        auto &pi = points[i];
        auto &pj = points[j];
        a += pi.x * pj.y - pi.y * pj.x;
      }
  
      first = contour;
    }
    return a * .5f;
  }
  
  void hb_outline_t::embolden (float x_strength, float y_strength,
  			     float x_shift, float y_shift)
  {
    /* This function is a straight port of FreeType's FT_Outline_EmboldenXY.
     * Permission has been obtained from the FreeType authors of the code
     * to relicense it under the HarfBuzz license. */
  
    if (!x_strength && !y_strength) return;
    if (!points) return;
  
    x_strength /= 2.f;
    y_strength /= 2.f;
  
    bool orientation_negative = control_area () < 0;
  
    signed first = 0;
    for (unsigned c = 0; c < contours.length; c++)
    {
      hb_outline_vector_t in, out, anchor, shift;
      float l_in, l_out, l_anchor = 0, l, q, d;
  
      l_in = 0;
      signed last = (int) contours[c] - 1;
  
      /* pacify compiler */
      in.x = in.y = anchor.x = anchor.y = 0;
  
      /* Counter j cycles though the points; counter i advances only  */
      /* when points are moved; anchor k marks the first moved point. */
      for ( signed i = last, j = first, k = -1;
  	  j != i && i != k;
  	  j = j < last ? j + 1 : first )
      {
        if ( j != k )
        {
  	out.x = points[j].x - points[i].x;
  	out.y = points[j].y - points[i].y;
  	l_out = out.normalize_len ();
  
  	if ( l_out == 0 )
  	  continue;
        }
        else
        {
  	out   = anchor;
  	l_out = l_anchor;
        }
  
        if ( l_in != 0 )
        {
  	if ( k < 0 )
  	{
  	  k        = i;
  	  anchor   = in;
  	  l_anchor = l_in;
  	}
  
  	d = in.x * out.x + in.y * out.y;
  
  	/* shift only if turn is less than ~160 degrees */
  	if ( d > -15.f/16.f )
  	{
  	  d = d + 1.f;
  
  	  /* shift components along lateral bisector in proper orientation */
  	  shift.x = in.y + out.y;
  	  shift.y = in.x + out.x;
  
  	  if ( orientation_negative )
  	    shift.x = -shift.x;
  	  else
  	    shift.y = -shift.y;
  
  	  /* restrict shift magnitude to better handle collapsing segments */
  	  q = out.x * in.y - out.y * in.x;
  	  if ( orientation_negative )
  	    q = -q;
  
  	  l = hb_min (l_in, l_out);
  
  	  /* non-strict inequalities avoid divide-by-zero when q == l == 0 */
  	  if (x_strength * q <= l * d)
  	    shift.x = shift.x * x_strength / d;
  	  else
  	    shift.x = shift.x * l / q;
  
  
  	  if (y_strength * q <= l * d)
  	    shift.y = shift.y * y_strength / d;
  	  else
  	    shift.y = shift.y * l / q;
  	}
  	else
  	  shift.x = shift.y = 0;
  
  	for ( ;
  	      i != j;
  	      i = i < last ? i + 1 : first )
  	{
  	  points[i].x += x_shift + shift.x;
  	  points[i].y += y_shift + shift.y;
  	}
        }
        else
  	i = j;
  
        in   = out;
        l_in = l_out;
      }
  
      first = last + 1;
    }
  }
  
  static void
  hb_outline_recording_pen_move_to (hb_draw_funcs_t *dfuncs HB_UNUSED,
  				  void *data,
  				  hb_draw_state_t *st,
  				  float to_x, float to_y,
  				  void *user_data HB_UNUSED)
  {
    hb_outline_t *c = (hb_outline_t *) data;
  
    c->points.push (hb_outline_point_t {to_x, to_y, hb_outline_point_t::type_t::MOVE_TO});
  }
  
  static void
  hb_outline_recording_pen_line_to (hb_draw_funcs_t *dfuncs HB_UNUSED,
  				  void *data,
  				  hb_draw_state_t *st,
  				  float to_x, float to_y,
  				  void *user_data HB_UNUSED)
  {
    hb_outline_t *c = (hb_outline_t *) data;
  
    c->points.push (hb_outline_point_t {to_x, to_y, hb_outline_point_t::type_t::LINE_TO});
  }
  
  static void
  hb_outline_recording_pen_quadratic_to (hb_draw_funcs_t *dfuncs HB_UNUSED,
  				       void *data,
  				       hb_draw_state_t *st,
  				       float control_x, float control_y,
  				       float to_x, float to_y,
  				       void *user_data HB_UNUSED)
  {
    hb_outline_t *c = (hb_outline_t *) data;
  
    c->points.push (hb_outline_point_t {control_x, control_y, hb_outline_point_t::type_t::QUADRATIC_TO});
    c->points.push (hb_outline_point_t {to_x, to_y, hb_outline_point_t::type_t::QUADRATIC_TO});
  }
  
  static void
  hb_outline_recording_pen_cubic_to (hb_draw_funcs_t *dfuncs HB_UNUSED,
  				   void *data,
  				   hb_draw_state_t *st,
  				   float control1_x, float control1_y,
  				   float control2_x, float control2_y,
  				   float to_x, float to_y,
  				   void *user_data HB_UNUSED)
  {
    hb_outline_t *c = (hb_outline_t *) data;
  
    c->points.push (hb_outline_point_t {control1_x, control1_y, hb_outline_point_t::type_t::CUBIC_TO});
    c->points.push (hb_outline_point_t {control2_x, control2_y, hb_outline_point_t::type_t::CUBIC_TO});
    c->points.push (hb_outline_point_t {to_x, to_y, hb_outline_point_t::type_t::CUBIC_TO});
  }
  
  static void
  hb_outline_recording_pen_close_path (hb_draw_funcs_t *dfuncs HB_UNUSED,
  				     void *data,
  				     hb_draw_state_t *st,
  				     void *user_data HB_UNUSED)
  {
    hb_outline_t *c = (hb_outline_t *) data;
  
    c->contours.push (c->points.length);
  }
  
  static inline void free_static_outline_recording_pen_funcs ();
  
  static struct hb_outline_recording_pen_funcs_lazy_loader_t : hb_draw_funcs_lazy_loader_t<hb_outline_recording_pen_funcs_lazy_loader_t>
  {
    static hb_draw_funcs_t *create ()
    {
      hb_draw_funcs_t *funcs = hb_draw_funcs_create ();
  
      hb_draw_funcs_set_move_to_func (funcs, hb_outline_recording_pen_move_to, nullptr, nullptr);
      hb_draw_funcs_set_line_to_func (funcs, hb_outline_recording_pen_line_to, nullptr, nullptr);
      hb_draw_funcs_set_quadratic_to_func (funcs, hb_outline_recording_pen_quadratic_to, nullptr, nullptr);
      hb_draw_funcs_set_cubic_to_func (funcs, hb_outline_recording_pen_cubic_to, nullptr, nullptr);
      hb_draw_funcs_set_close_path_func (funcs, hb_outline_recording_pen_close_path, nullptr, nullptr);
  
      hb_draw_funcs_make_immutable (funcs);
  
      hb_atexit (free_static_outline_recording_pen_funcs);
  
      return funcs;
    }
  } static_outline_recording_pen_funcs;
  
  static inline
  void free_static_outline_recording_pen_funcs ()
  {
    static_outline_recording_pen_funcs.free_instance ();
  }
  
  hb_draw_funcs_t *
  hb_outline_recording_pen_get_funcs ()
  {
    return static_outline_recording_pen_funcs.get_unconst ();
  }
  
  
  #endif
  

Download