|
817a43fb
|
2022-09-28T09:05:45
|
|
Revert to previous cfi check. (#735)
|
|
f0675ab7
|
2022-09-19T17:30:51
|
|
Update version to 3.4.4-experimental
|
|
e3eaa609
|
2022-09-19T23:26:59
|
|
Suppress error console output duing configure in case not an ELF file (#729)
On Cygwin, MSYS and MinGW readelf is available, but files generated are no
ELF files. This results in an Error output on console:
'checking whether .eh_frame section should be read-only... readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
yes'
With this patch the error output is suppressed resulting in only
'checking whether .eh_frame section should be read-only... yes'
Setting of related variables is not changed.
Co-authored-by: Hannes Müller <>
|
|
9b1dd8f2
|
2022-09-19T12:22:04
|
|
Update version to 3.4.3
|
|
ee22ecbd
|
2022-09-18T01:56:25
|
|
Add MSYS configuration files (#728)
* Add MSYS configuration files
MSYS behaves very similiar to Cygwin, e.g. also __CYGWIN__ is defined.
Now 'make check' passes on MSYS without extra patches.
* Fix warning extra tokens at end of #endif in closures.c
Extra tokens converted into a comment. Also nearby indentations corrected.
* Fix missing prototype warning mkostemp() on Cygwin
Cygwin requires also _GNU_SOURCE to be defined to enable mkostemp() prototype.
* Fix warning label ‘out’ defined but not used in ffi functions
Define same preprocessor conditions for goto and label visibility.
* Fix warning label ‘out’ defined but not used and related indentations.
Define same preprocessor conditions for goto and label visibility. Correct also
related indentations.
Co-authored-by: Hannes Müller <>
|
|
a1130f37
|
2022-09-12T08:53:06
|
|
Add static trampoline support for Cygwin
|
|
ea124a99
|
2022-09-07T07:21:21
|
|
Remove bogus sparc compiler flag
|
|
8ee64076
|
2022-09-07T07:14:13
|
|
Fix typo
|
|
da905276
|
2022-09-06T21:15:58
|
|
dlmmap fix and always check for PaX MPROTECT on linux
Also make EMUTRAMP experimental
From Stefan Bühler
https://github.com/libffi/libffi/pull/282
|
|
9b58d4ba
|
2022-09-01T08:57:13
|
|
GCC_AS_CFI_PSEUDO_OP passes on msvc, although it's not sufficient.
|
|
80912f2f
|
2022-09-01T14:47:16
|
|
Makefile: enable target overridings. (#661)
This patch allows target to provide extra files enabling the
override of Makefile rules.
This patch is not needed for libffi itself but only for GCC on AIX. The
t-aix file which is here empty will be replaced in GCC repository. We cannot
include GCC version directly here because it has no sense for a standalone
libffi.
Co-authored-by: Clement <clement.chigot@atos.net>
|
|
1fa7d96c
|
2022-09-01T08:28:59
|
|
Don't use cached configure test result
|
|
bcb42e43
|
2022-09-01T08:05:01
|
|
Fix .cfi pseudo-ops test.
The existing tests were failing because the GCC was wrapping the test
asm in cfi directives, which gas doesn't like. So now we test if the
compiler emits them first, and assume that the assembler will accept
them. If that doesn't work, then we test if the assembler will accept
them assuming the compiler doesn't emit them.
|
|
5a4774cd
|
2022-07-22T05:56:30
|
|
static trampoline for LoongArch (#723)
For the benefit and technical details of static trampoline, see
https://github.com/libffi/libffi/pull/624. As a new architecture, let's
be "safer" from the start.
The change survived libffi testsuite on loongarch64-linux-gnu.
|
|
4a46f35b
|
2022-06-25T21:14:30
|
|
Update configury
|
|
280fe78d
|
2022-06-25T18:58:53
|
|
configure.ac: use grep -E instead of egrep if possible (#720)
Upstream will start to emit a warning if egrep is invoked in the next
grep release. Stop invoking it explicitly. Use AC_PROG_EGREP to try
"grep -E" first, and fallback to egrep if "grep -E" does not work. We
need this fallback for some non-GNU grep implementations (like Solaris).
Url: https://git.savannah.gnu.org/cgit/grep.git/commit/?id=a951562
|
|
f9ea4168
|
2021-06-28T21:10:49
|
|
Update version to 3.4.2
|
|
2bdc8e52
|
2021-06-28T19:50:29
|
|
Version 3.4.1
|
|
c1d09bf0
|
2021-06-28T18:50:31
|
|
Update version to 3.4.0
|
|
4557f232
|
2021-06-28T09:53:01
|
|
3.4.0 release candidate 2
|
|
132699b9
|
2021-06-27T16:50:20
|
|
configure.ac: add --disable-exec-static-tramp flag (#647)
Some projects like GHC (Glasgow Haskell Compiler) and
gobject-introspection use `ffi_closure_alloc()` as a way
to allocate executable memory. exec static tramp
interferes with it (unclear how exactly yet).
GHC symptom: ffi closure freeing cimplains about unexpected
trampoline (GHC manually fills one):
```
$ ghci
GHCi, version 8.10.5: https://www.haskell.org/ghc/ :? for help
ghc: freeHaskellFunctionPtr: not for me, guv! 0x7f0417a1efe8
ghc: freeHaskellFunctionPtr: not for me, guv! 0x7f0417a1efc8
```
gobject-introspection symptom:
```
$ meld
Segmentation fault (core dumped)
$ gdb --args /usr/bin/python3.9 /usr/bin/meld
(gdb) run
...
Thread 1 "python3.9" received signal SIGSEGV, Segmentation fault.
0x00007fffe9ac1ae8 in g_callable_info_free_closure (
callable_info=0x555555d45990, closure=0x7fffe9e70c20)
at ../gobject-introspection-1.68.0/girepository/girffi.c:428
428 g_free (wrapper->ffi_closure.cif->arg_types);
(gdb) bt
callable_info=0x555555d45990, closure=0x7fffe9e70c20)
at ../gobject-introspection-1.68.0/girepository/girffi.c:428
data=0x555555d252d0)
at ../pygobject-3.40.1/gi/pygi-closure.c:635
...
```
To ease downstreams narrowing down the actual problem let's
provide a knob to disable exec static trampolines.
The change for not affect current default.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
|
|
f792adb6
|
2021-06-26T22:26:52
|
|
configure.ac: allow user to specify READELF (#646)
Before the change with x86_64-pc-linux-gnu cross-compiler
installed the configure was not able to find cross-readelf:
```
$ ./configure --host=x86_64-pc-linux-gnu
...
checking whether .eh_frame section should be read-only... .././configure: line 19540: readelf: command not found
yes
...
```
The change uses AC_CHECK_TOOL to automatically seatch for ${host}-readelf,
readelf. And as a bonus it also allows user to override readelf with
something like READELF=llvm-readelf.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
|
|
9cf15b3a
|
2021-06-26T12:12:06
|
|
Make 3.4 release candidate 1
|
|
58dfdf6a
|
2021-03-24T23:19:54
|
|
testsuite: fix compiler vendor detection on dash as /bin/sh (#594)
In https://bugs.gentoo.org/753299 Paolo Pedroni reported
a single test failure out of all libffi. Here is the minimal
reproducer:
```
$ ./autogen
$ CONFIG_SHELL=/bin/dash ./configure --host=x86_64-pc-linux-gnu
$ make check RUNTESTFLAGS='complex.exp'
...
FAIL: libffi.complex/cls_align_complex_float.c (test for excess errors)
```
This happens because under 'dash' shell autoconf generates slightly
different style of string quotation in `config.log`:
- on bash: `ax_cv_c_compiler_vendor=gnu`
- on dash: `ax_cv_c_compiler_vendor='gnu'`
To avoid shell quotation parsing the change just embeds
`compiler_vendor` into `local.exp` at configure time.
Reported-by: Paolo Pedroni
Bug: https://bugs.gentoo.org/753299
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
|
|
9ba55921
|
2021-03-05T10:07:30
|
|
Static tramp v5 (#624)
* Static Trampolines
Closure Trampoline Security Issue
=================================
Currently, the trampoline code used in libffi is not statically defined in
a source file (except for MACH). The trampoline is either pre-defined
machine code in a data buffer. Or, it is generated at runtime. In order to
execute a trampoline, it needs to be placed in a page with executable
permissions.
Executable data pages are attack surfaces for attackers who may try to
inject their own code into the page and contrive to have it executed. The
security settings in a system may prevent various tricks used in user land
to write code into a page and to have it executed somehow. On such systems,
libffi trampolines would not be able to run.
Static Trampoline
=================
To solve this problem, the trampoline code needs to be defined statically
in a source file, compiled and placed in the text segment so it can be
mapped and executed naturally without any tricks. However, the trampoline
needs to be able to access the closure pointer at runtime.
PC-relative data referencing
============================
The solution implemented in this patch set uses PC-relative data references.
The trampoline is mapped in a code page. Adjacent to the code page, a data
page is mapped that contains the parameters of the trampoline:
- the closure pointer
- pointer to the ABI handler to jump to
The trampoline code uses an offset relative to its current PC to access its
data.
Some architectures support PC-relative data references in the ISA itself.
E.g., X64 supports RIP-relative references. For others, the PC has to
somehow be loaded into a general purpose register to do PC-relative data
referencing. To do this, we need to define a get_pc() kind of function and
call it to load the PC in a desired register.
There are two cases:
1. The call instruction pushes the return address on the stack.
In this case, get_pc() will extract the return address from the stack
and load it in the desired register and return.
2. The call instruction stores the return address in a designated register.
In this case, get_pc() will copy the return address to the desired
register and return.
Either way, the PC next to the call instruction is obtained.
Scratch register
================
In order to do its job, the trampoline code would need to use a scratch
register. Depending on the ABI, there may not be a register available for
scratch. This problem needs to be solved so that all ABIs will work.
The trampoline will save two values on the stack:
- the closure pointer
- the original value of the scratch register
This is what the stack will look like:
sp before trampoline ------> --------------------
| closure pointer |
--------------------
| scratch register |
sp after trampoline -------> --------------------
The ABI handler can do the following as needed by the ABI:
- the closure pointer can be loaded in a desired register
- the scratch register can be restored to its original value
- the stack pointer can be restored to its original value
(the value when the trampoline was invoked)
To do this, I have defined prolog code for each ABI handler. The legacy
trampoline jumps to the ABI handler directly. But the static trampoline
defined in this patch jumps tp the prolog code which performs the above
actions before jumping to the ABI handler.
Trampoline Table
================
In order to reduce the trampoline memory footprint, the trampoline code
would be defined as a code array in the text segment. This array would be
mapped into the address space of the caller. The mapping would, therefore,
contain a trampoline table.
Adjacent to the trampoline table mapping, there will be a data mapping that
contains a parameter table, one parameter block for each trampoline. The
parameter block will contain:
- a pointer to the closure
- a pointer to the ABI handler
The static trampoline code would finally look like this:
- Make space on the stack for the closure and the scratch register
by moving the stack pointer down
- Store the original value of the scratch register on the stack
- Using PC-relative reference, get the closure pointer
- Store the closure pointer on the stack
- Using PC-relative reference, get the ABI handler pointer
- Jump to the ABI handler
Mapping size
============
The size of the code mapping that contains the trampoline table needs to be
determined on a per architecture basis. If a particular architecture
supports multiple base page sizes, then the largest supported base page size
needs to be chosen. E.g., we choose 16K for ARM64.
Trampoline allocation and free
==============================
Static trampolines are allocated in ffi_closure_alloc() and freed in
ffi_closure_free().
Normally, applications use these functions. But there are some cases out
there where the user of libffi allocates and manages its own closure
memory. In such cases, static trampolines cannot be used. These will
fall back to using legacy trampolines. The user has to make sure that
the memory is executable.
ffi_closure structure
=====================
I did not want to make any changes to the size of the closure structure for
this feature to guarantee compatibility. But the opaque static trampoline
handle needs to be stored in the closure. I have defined it as follows:
- char tramp[FFI_TRAMPOLINE_SIZE];
+ union {
+ char tramp[FFI_TRAMPOLINE_SIZE];
+ void *ftramp;
+ };
If static trampolines are used, then tramp[] is not needed to store a
dynamic trampoline. That space can be reused to store the handle. Hence,
the union.
Architecture Support
====================
Support has been added for x64, i386, aarch64 and arm. Support for other
architectures can be added very easily in the future.
OS Support
==========
Support has been added for Linux. Support for other OSes can be added very
easily.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
* x86: Support for Static Trampolines
- Define the arch-specific initialization function ffi_tramp_arch ()
that returns trampoline size information to common code.
- Define the trampoline code mapping and data mapping sizes.
- Define the trampoline code table statically. Define two tables,
actually, one with CET and one without.
- Introduce a tiny prolog for each ABI handling function. The ABI
handlers addressed are:
- ffi_closure_unix64
- ffi_closure_unix64_sse
- ffi_closure_win64
The prolog functions are called:
- ffi_closure_unix64_alt
- ffi_closure_unix64_sse_alt
- ffi_closure_win64_alt
The legacy trampoline jumps to the ABI handler. The static
trampoline jumps to the prolog function. The prolog function uses
the information provided by the static trampoline, sets things up
for the ABI handler and then jumps to the ABI handler.
- Call ffi_tramp_set_parms () in ffi_prep_closure_loc () to
initialize static trampoline parameters.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
* i386: Support for Static Trampolines
- Define the arch-specific initialization function ffi_tramp_arch ()
that returns trampoline size information to common code.
- Define the trampoline code table statically. Define two tables,
actually, one with CET and one without.
- Define the trampoline code table statically.
- Introduce a tiny prolog for each ABI handling function. The ABI
handlers addressed are:
- ffi_closure_i386
- ffi_closure_STDCALL
- ffi_closure_REGISTER
The prolog functions are called:
- ffi_closure_i386_alt
- ffi_closure_STDCALL_alt
- ffi_closure_REGISTER_alt
The legacy trampoline jumps to the ABI handler. The static
trampoline jumps to the prolog function. The prolog function uses
the information provided by the static trampoline, sets things up
for the ABI handler and then jumps to the ABI handler.
- Call ffi_tramp_set_parms () in ffi_prep_closure_loc () to
initialize static trampoline parameters.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
* arm64: Support for Static Trampolines
- Define the arch-specific initialization function ffi_tramp_arch ()
that returns trampoline size information to common code.
- Define the trampoline code mapping and data mapping sizes.
- Define the trampoline code table statically.
- Introduce a tiny prolog for each ABI handling function. The ABI
handlers addressed are:
- ffi_closure_SYSV
- ffi_closure_SYSV_V
The prolog functions are called:
- ffi_closure_SYSV_alt
- ffi_closure_SYSV_V_alt
The legacy trampoline jumps to the ABI handler. The static
trampoline jumps to the prolog function. The prolog function uses
the information provided by the static trampoline, sets things up
for the ABI handler and then jumps to the ABI handler.
- Call ffi_tramp_set_parms () in ffi_prep_closure_loc () to
initialize static trampoline parameters.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
* arm: Support for Static Trampolines
- Define the arch-specific initialization function ffi_tramp_arch ()
that returns trampoline size information to common code.
- Define the trampoline code mapping and data mapping sizes.
- Define the trampoline code table statically.
- Introduce a tiny prolog for each ABI handling function. The ABI
handlers addressed are:
- ffi_closure_SYSV
- ffi_closure_VFP
The prolog functions are called:
- ffi_closure_SYSV_alt
- ffi_closure_VFP_alt
The legacy trampoline jumps to the ABI handler. The static
trampoline jumps to the prolog function. The prolog function uses
the information provided by the static trampoline, sets things up
for the ABI handler and then jumps to the ABI handler.
- Call ffi_tramp_set_parms () in ffi_prep_closure_loc () to
initialize static trampoline parameters.
Signed-off-by: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
|
|
5c63b463
|
2020-12-02T16:14:27
|
|
Use memfd_create() (#604)
memfd_create creates a file in a memory-only filesystem that may
bypass strict security protocols in filesystem-based temporary
files.
|
|
2d86809d
|
2020-10-27T10:00:03
|
|
Fix read-only .eh_frame section test when CFLAGS contains -flto. (#590)
|
|
8c50837f
|
2020-03-10T04:36:09
|
|
Improve read-write .eh_frame check (#546)
llvm-objdump -h does not print BFD SEC_* constants like "READONLY",
so the check will consider .eh_frame writable.
clang 11 (since https://reviews.llvm.org/D73999) will error for mismatching section flags.
Use readelf -S and check "WA" instead.
|
|
4c7bde32
|
2020-03-10T02:05:42
|
|
Port to iOS/arm64e (#548)
|
|
d996cb28
|
2019-11-23T09:00:14
|
|
Version 3.3
|
|
88a76477
|
2019-11-03T06:28:51
|
|
rc2. hack as per: https://github.com/travis-ci/travis-ci/issues/6934
|
|
52b066f0
|
2019-10-24T07:03:43
|
|
Update versions to 3.3-rc1
|
|
2c5b1642
|
2018-12-19T18:33:08
|
|
fix(configure): Correctly detect visibility("hidden") support on Darwin
|
|
ba73a671
|
2018-07-20T09:37:43
|
|
Update FFI_HIDDEN() to use .private_extern on Apple platforms and use the macro where appropriate
Fix issue #439
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@macports.org>
|
|
b69f95d6
|
2018-04-26T19:27:54
|
|
build: fix subst toolexecdir, toolexeclibdir
On CentOS 7.4, configure script generated by autogen.sh will output the
following values when compiling GCC source code
toolexecdir='NONE/$(target_alias)'
toolexeclibdir='NONE/$(target_alias)/lib'
and cause build error
... -o libffi.la -rpath NONE/riscv64-bs-linux-gnu/lib ...
checking for shl_load in -ldld... libtool: link: only absolute run-paths are allowed
|
|
8660e693
|
2018-04-02T08:30:17
|
|
3.3 release candidate 0
|
|
d3693b46
|
2018-03-27T08:05:42
|
|
Copy - don't symlink - to support msvc builds
|
|
9aefbb10
|
2018-03-13T07:51:02
|
|
Update version number to next pre-release
|
|
93d8e7dd
|
2017-09-27T21:51:34
|
|
Fix #265
|
|
19ab448d
|
2017-05-16T08:32:06
|
|
Support -ios triple
Autoconf hasn’t had an update since 2014, and it doesn’t look like it will soon[1]
This updates config.{guess,sub}
It adds support for e.g. `-ios`, which allows to have targets like `aarch64-apple-ios`.
It basically does exactly what the config.guess script says:
> It is advised that you download the most up to date version of the config scripts from
The configure.ac script has been updated to relax `*-apple-darwin*` to `*-apple-*`.
Similarly the `.gitignore` and `autogen.sh` needed to be updated to respect the
newer `config.{sub,guess}`
—
[1]: http://lists.gnu.org/archive/html/autoconf/2016-07/msg00017.html
|
|
30b3440c
|
2016-05-26T08:55:04
|
|
[Darwin, configure] Allow configure to work for <arch>-*-darwin.
The exec configury is appropriate for all current targets (including using older tools on them).
|
|
9edaa695
|
2016-05-18T10:56:19
|
|
Merge pull request #230 from rth7680/symver
Use ELF symbol versioning
|
|
1b4f5ee6
|
2016-05-18T11:12:58
|
|
Update project URLs to use libffi/libffi
|
|
c02c3414
|
2016-03-03T13:51:44
|
|
Use ELF symbol versioning
At the same time, we must bump the (major) ABI version. This needed to be
done anyway due to ABI breakage in the AArch64 port (see 12cf89ee and the
corresponding GCC PR70024).
|
|
6dd5fd5a
|
2016-02-22T15:34:39
|
|
fix documentation building
An earlier patch added --disable-docs, but went too far, making it
impossible to build the docs.
It turns out that Automake seemingly has a bug preventing the
conditional build of an info file. So, this patch works around the
bug by putting the info_TEXINFOS rule into a new doc/Makefile.am.
Tested by building with and without --disable-docs and looking for the
existence of doc/libffi.info.
|
|
f2f234ae
|
2016-02-20T06:50:29
|
|
Merge pull request #190 from havardgraff/master
Add configure-option to disable building docs
|
|
877ea9bf
|
2015-10-29T22:50:42
|
|
Add configure flag to disable multi-os-directory support
In some environments, installing the library to GCC's
multi-os-directory is not perferable. This patch adds a switch
to configure "--disable-multi-os-directory" which will disable
that check, typically falling back to ${libdir} unless
cross-compiling.
Original patch was written by Stewart Brodie, and was found at
https://sourceware.org/ml/libffi-discuss/2013/msg00144.html
I've just updated it to work with the current version.
|
|
fa7a2571
|
2015-05-12T10:45:13
|
|
Add configure-option to disable building docs
|
|
b0e97963
|
2015-01-27T22:10:12
|
|
configure: Run HAVE_AS_X86_PCREL for all X86 targets
|
|
53636634
|
2015-01-16T15:19:38
|
|
aarch64: implement the trampoline table workaround for ffi closures on Apple systems
This is a direct copy/paste port of the ARM code, with changes because of Aarch64 pc-relative addressing restrictions.
|
|
e1a5ddb3
|
2015-01-07T17:51:07
|
|
Fix expr error in Solaris 10 when using gcc.
|
|
f69ec6f3
|
2014-12-18T16:21:07
|
|
s390: Use pc-relative insns in 31-bit mode
It's silly to stick to esa/390 features when the compiler won't.
Detect when brasl and larl are used by the compiler and then use
them in the assembly.
|
|
5d69d57a
|
2014-11-13T13:50:39
|
|
configure: Move target source selection into configure.host
This eliminates the AM_CONDITIONAL ugliness, which eliminates
just a bit of extra boilerplate for a new target.
At the same time, properly categorize the EXTRA_DIST files
into SOURCES and HEADERS, for the generation of ctags.
|
|
57f52484
|
2014-11-13T12:42:54
|
|
configure: Split out configure.host
Split out the host case statement to a separate file, so that
we don't have to regenerate configure.in for changes therein.
|
|
8d5debc7
|
2014-11-12T08:04:51
|
|
Update in preparation for next release
|
|
20562ac0
|
2014-11-12T07:00:59
|
|
Fix for AArch64. Release as 3.2.1.
|
|
0f316ab7
|
2014-09-27T00:19:15
|
|
Add OpenRISC support
This patch adds support for the OpenRISC architecture.
(http://opencores.org/or1k/Main_Page)
This patch has been tested under Linux with QEMU-user emulation support.
- 32 Bit
- big endian
- delayed instructions
This is the only available configuration under Linux.
The description of the ABI can be found on the official website.
Is passes the testsuite except of the unwindtest_ffi_call.cc
testcase, which seems to be a problem of gcc and not libffi.
Some testcases of the gcc testsuite still fail.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
|
|
ae8d2554
|
2014-09-20T07:08:37
|
|
Update version to 3.2
|
|
ad0d1d23
|
2014-06-12T06:30:21
|
|
Fix paths in libffi.pc.in
|
|
69289c10
|
2014-05-31T08:54:08
|
|
Prepare for libffi 3.1.1
|
|
c1166d4f
|
2014-05-12T19:44:08
|
|
closures: Check for mkostemp(3)
|
|
57465744
|
2014-05-11T10:30:22
|
|
Update to version 3.1
|
|
7ba4c5d7
|
2014-05-11T09:52:47
|
|
Use to get correct dir
|
|
7d698125
|
2014-03-26T23:17:56
|
|
Use the proper C++ compiler to run C++ tests
Running the C compiler with -shared-libgcc -lstdc++ does not work on
non-GCC compilers.
|
|
0c382470
|
2014-03-26T14:51:32
|
|
Always set CC_FOR_TARGET for dejagnu, to make the testsuite respect $CC
This fixes cross-compilation and compilation with CC="gcc -m32".
|
|
c860a992
|
2014-03-25T17:02:51
|
|
Upgrade version to 3.1-rc1
|
|
b2d610e0
|
2014-03-21T11:10:13
|
|
Compile win32.S on 32-bit Darwin as well
|
|
be50b87a
|
2014-03-24T21:44:13
|
|
Always use configure to detect whether global symbols need underscores
64-bit Windows already used this check; make it universal, and use it in
place of an ifdef on X86_WIN32, to handle non-Windows platforms that use
the underscore, such as Darwin.
|
|
d948d0a7
|
2014-03-16T10:53:48
|
|
Merge pull request #98 from joshtriplett/unconfigure.host
Merge configure.host into configure.ac
|
|
a86bd318
|
2014-03-16T06:58:59
|
|
Merge configure.host into configure.ac
configure.host only has a single entry, and shows no signs of needing
more added.
|
|
b61b472b
|
2014-03-16T09:45:55
|
|
Update version to 3.1-rc0. Clean up README.
|
|
76d19d00
|
2014-03-14T16:54:31
|
|
Ensure the linker supports @unwind sections in libffi.
|
|
a1a6f71b
|
2014-03-10T15:12:47
|
|
Remove stray hunk that shouldn't have been included in this patch.
|
|
dfa37387
|
2014-03-10T14:53:48
|
|
Ensure the linker supports @unwind sections in libffi. From Mozilla bug 756740.
https://bugzilla.mozilla.org/show_bug.cgi?id=778414
Also tracked as issue #42.
https://github.com/atgreen/libffi/issues/42
|
|
18eb81d0
|
2014-03-10T14:43:37
|
|
Allow building for mipsel with Android NDK r8. From Mozilla bug 756740.
https://bugzilla.mozilla.org/show_bug.cgi?id=756740
|
|
5a88c85f
|
2014-02-28T00:23:04
|
|
Fix spelling errors
|
|
cc82051c
|
2014-02-28T00:23:04
|
|
Fix spelling errors
|
|
ab79d6e2
|
2013-11-21T06:12:35
|
|
This separates the 32-bit sysv/linux/bsd code from the 64-bit linux
code, and makes it possible to link code compiled with different
options to those used to compile libffi. For example, a
-mlong-double-128 libffi can be used with -mlong-double-64 code.
Using the return value area as a place to pass parameters wasn't such
a good idea, causing a failure of cls_ulonglong.c. I didn't see this
when running the mainline gcc libffi testsuite because that version of
the test is inferior to the upstreamm libffi test.
Using NUM_FPR_ARG_REGISTERS rather than NUM_FPR_ARG_REGISTERS64 meant
that a parameter save area could be allocated before it was strictly
necessary. Wrong but harmless. Found when splitting apart ffi.c
into 32-bit and 64-bit support.
|
|
ac753688
|
2013-11-21T06:12:35
|
|
This separates the 32-bit sysv/linux/bsd code from the 64-bit linux
code, and makes it possible to link code compiled with different
options to those used to compile libffi. For example, a
-mlong-double-128 libffi can be used with -mlong-double-64 code.
Using the return value area as a place to pass parameters wasn't such
a good idea, causing a failure of cls_ulonglong.c. I didn't see this
when running the mainline gcc libffi testsuite because that version of
the test is inferior to the upstreamm libffi test.
Using NUM_FPR_ARG_REGISTERS rather than NUM_FPR_ARG_REGISTERS64 meant
that a parameter save area could be allocated before it was strictly
necessary. Wrong but harmless. Found when splitting apart ffi.c
into 32-bit and 64-bit support.
|
|
16b93a21
|
2013-10-15T15:33:59
|
|
Add nios2 port.
|
|
d2fcbcdf
|
2013-10-08T06:27:46
|
|
Add m88k and VAX support. Update some configury bits.
|
|
f88118b3
|
2013-07-02T15:51:27
|
|
Revert "Merge pull request #36 from abergmeier/emscripten_fix"
This reverts commit 6a4d901dde7b3f87984c563505717cde3113d16e, reversing
changes made to b50a13b9c07ec09af4b9697e482acdad571e6961.
|
|
6a4d901d
|
2013-07-02T12:12:34
|
|
Merge pull request #36 from abergmeier/emscripten_fix
Fixes for building with Emscripten
|
|
b082e150
|
2013-06-10T16:19:33
|
|
Add ARC support
This adds support for the ARC architecture to libffi. DesignWare ARC
is a family of processors from Synopsys, Inc.
This patch has been tested on a little-endian system and passes
the testsuite.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
|
|
587002c0
|
2013-04-19T17:12:24
|
|
Enable disabling of libtool on platforms where it does not work (e.g. LLVM).
Build libraries normally then.
|
|
f22ab3c6
|
2013-03-17T18:34:54
|
|
Merge branch 'master' of github.com:/atgreen/libffi
|
|
cb32c812
|
2013-03-17T09:27:55
|
|
Fix lib install dir
|
|
efd7866a
|
2013-03-16T08:35:57
|
|
2.0.13rc1
|
|
215763d0
|
2013-03-16T07:57:35
|
|
Update configury.
|
|
2fb527a0
|
2013-03-16T07:46:38
|
|
Add Meta processor support
|
|
f308faf1
|
2013-02-11T14:25:13
|
|
Add moxie support. Release 3.0.12.
|
|
cb03ea8f
|
2013-02-08T12:25:18
|
|
sparc v9 fixes for sun tools
|
|
9db7e1a9
|
2013-02-07T21:06:08
|
|
Fix botched sparc patch. Update version.
|
|
ce0138e6
|
2013-02-07T18:04:01
|
|
Update bug report address. rc2.
|
|
ed6ae950
|
2013-02-07T16:43:36
|
|
Add libtool-ldflags. Define toolexeclibdir for non-GCC builds.
|
|
ffef2e04
|
2013-02-07T15:47:01
|
|
x32 and libtool fixes
|
|
176aa9d2
|
2013-02-07T15:29:22
|
|
Fix GCC usage test and update README
|
|
f62bd63f
|
2013-02-06T17:38:32
|
|
Release candidate 1
|
|
bcc0c280
|
2013-01-26T15:21:14
|
|
Reorder x86_64 tests
So that darwin and cygwin/mingw are tested before the generic check --
which allows them to actually be set.
|
|
aeb8719a
|
2013-01-21T07:37:30
|
|
New microblaze support
|