|
17297239
|
2022-01-06T09:17:30
|
|
Eliminate non-ANSI C compatibility macros
libjpeg-turbo has never supported non-ANSI C compilers. Per the spec,
ANSI C compilers must have locale.h, stddef.h, stdlib.h, memset(),
memcpy(), unsigned char, and unsigned short. They must also handle
undefined structures.
|
|
a72816ed
|
2021-07-16T09:37:06
|
|
Use uintptr_t, if avail, for pointer-to-int casts
Although sizeof(void *) == sizeof(size_t) for all architectures that are
currently supported by libjpeg-turbo, such is not guaranteed by the C
standard. Specifically, CHERI-enabled architectures (e.g. CHERI-RISC-V
or Arm's Morello) use capability pointers that are twice the size of
size_t (128 bits for Morello and RV64), so casting to size_t strips the
upper bits of the pointer (including the validity bit) and makes it
non-deferenceable, as indicated by the following compiler warning:
warning: cast from provenance-free integer type to pointer type will
give pointer that can not be dereferenced
[-Werror,-Wcheri-capability-misuse]
cvalue = values = (JCOEF *)PAD((size_t)values_unaligned, 16);
Ignoring this warning results in a run-time crash. Casting pointers to
uintptr_t, if it is available, avoids this problem, since uintptr_t is
defined as an unsigned integer type that can hold a pointer value.
Since C89 compatibility is still necessary in libjpeg-turbo, this commit
introduces a new typedef for pointer-to-integer casts that uses a
GNU-specific extension available in GCC 4.6+ and Clang 3.0+ and falls
back to using size_t if the extension is unavailable. The only other
options would require C99 or Clang-specific builtins.
Closes #538
|
|
9fc018fd
|
2020-01-12T00:00:00
|
|
The Independent JPEG Group's JPEG software v9d
|
|
|
96e4e7eb
|
2018-01-14T00:00:00
|
|
The Independent JPEG Group's JPEG software v9c
|
|
|
42825b68
|
2019-11-07T14:03:23
|
|
Fault-tolerant multi-scan block smoothing
This commit modifies the behavior of the block smoothing algorithm in
the libjpeg API library so that, if a scan in a multi-scan JPEG image is
incomplete (due to premature termination of the image stream), the block
smoothing parameters from the previous (complete) scan are used to
smooth any iMCU rows that the incomplete scan does not contain.
Closes #343
|
|
|
293263c3
|
2018-03-17T15:14:35
|
|
Format preprocessor macros more consistently
Within the libjpeg API code, it seems to be more the convention than not
to separate the macro name and value by two or more spaces, which
improves general readability. Making this consistent across all of
libjpeg-turbo is less about my individual preferences and more about
making it easy to automatically detect variations from our chosen
formatting convention. I intend to release the script I'm using to
validate this stuff, once it matures and stabilizes a bit.
|
|
|
19c791cd
|
2018-03-08T10:55:20
|
|
Improve code formatting consistency
With rare exceptions ...
- Always separate line continuation characters by one space from
preceding code.
- Always use two-space indentation. Never use tabs.
- Always use K&R-style conditional blocks.
- Always surround operators with spaces, except in raw assembly code.
- Always put a space after, but not before, a comma.
- Never put a space between type casts and variables/function calls.
- Never put a space between the function name and the argument list in
function declarations and prototypes.
- Always surround braces ('{' and '}') with spaces.
- Always surround statements (if, for, else, catch, while, do, switch)
with spaces.
- Always attach pointer symbols ('*' and '**') to the variable or
function name.
- Always precede pointer symbols ('*' and '**') by a space in type
casts.
- Use the MIN() macro from jpegint.h within the libjpeg and TurboJPEG
API libraries (using min() from tjutil.h is still necessary for
TJBench.)
- Where it makes sense (particularly in the TurboJPEG code), put a blank
line after variable declaration blocks.
- Always separate statements in one-liners by two spaces.
The purpose of this was to ease maintenance on my part and also to make
it easier for contributors to figure out how to format patch
submissions. This was admittedly confusing (even to me sometimes) when
we had 3 or 4 different style conventions in the same source tree. The
new convention is more consistent with the formatting of other OSS code
bases.
This commit corrects deviations from the chosen formatting style in the
libjpeg API code and reformats the TurboJPEG API code such that it
conforms to the same standard.
NOTES:
- Although it is no longer necessary for the function name in function
declarations to begin in Column 1 (this was historically necessary
because of the ansi2knr utility, which allowed libjpeg to be built
with non-ANSI compilers), we retain that formatting for the libjpeg
code because it improves readability when using libjpeg's function
attribute macros (GLOBAL(), etc.)
- This reformatting project was accomplished with the help of AStyle and
Uncrustify, although neither was completely up to the task, and thus
a great deal of manual tweaking was required. Note to developers of
code formatting utilities: the libjpeg-turbo code base is an
excellent test bed, because AFAICT, it breaks every single one of the
utilities that are currently available.
- The legacy (MMX, SSE, 3DNow!) assembly code for i386 has been
formatted to match the SSE2 code (refer to
ff5685d5344273df321eb63a005eaae19d2496e3.) I hadn't intended to
bother with this, but the Loongson MMI implementation demonstrated
that there is still academic value to the MMX implementation, as an
algorithmic model for other 64-bit vector implementations. Thus, it
is desirable to improve its readability in the same manner as that of
the SSE2 implementation.
|
|
|
077e5bb4
|
2016-09-08T21:49:02
|
|
Fix out-of-bounds write in partial decomp. feature
Reported by Clang UBSan (refer to
https://bugzilla.mozilla.org/show_bug.cgi?id=1301252 for test image.)
This appears to be a legitimate bug introduced by
3ab68cf563f6edc2608c085f5c8b2d5d5c61157e. Any component array, such
as first_MCU_col and last_MCU_col, should always be able to accommodate
MAX_COMPONENTS values. The aforementioned test image had 8 components,
which was not enough to make the out-of-bounds write bust out of the
jpeg_decomp_master struct (and fortunately the memory after last_MCU_col
is an integer used as a boolean, so stomping on it will do nothing other
than change the decoder state.) I crafted another special image that
has 10 components (the maximum allowable), but that was apparently not
enough to bust out of the allocated memory, either. Thus, it is
posited that the security threat posed by this bug is either extremely
minimal or non-existent.
|
|
|
123f7258
|
2016-05-24T10:23:56
|
|
Format copyright headers more consistently
The IJG convention is to format copyright notices as:
Copyright (C) YYYY, Owner.
We try to maintain this convention for any code that is part of the
libjpeg API library (with the exception of preserving the copyright
notices from Cendio's code verbatim, since those predate
libjpeg-turbo.)
Note that the phrase "All Rights Reserved" is no longer necessary, since
all Buenos Aires Convention signatories signed onto the Berne Convention
in 2000. However, our convention is to retain this phrase for any files
that have a self-contained copyright header but to leave it off of any
files that refer to another file for conditions of distribution and use.
For instance, all of the non-SIMD files in the libjpeg API library refer
to README.ijg, and the copyright message in that file contains "All
Rights Reserved", so it is unnecessary to add it to the individual
files.
The TurboJPEG code retains my preferred formatting convention for
copyright notices, which is based on that of VirtualGL (where the
TurboJPEG API originated.)
|
|
|
3ab68cf5
|
2016-02-19T18:32:10
|
|
libjpeg API: Partial scanline decompression
This, in combination with the existing jpeg_skip_scanlines() function,
provides the ability to crop the image both horizontally and vertically
while decompressing (certain restrictions apply-- see libjpeg.txt.)
This also cleans up the documentation of the line skipping feature and
removes the "strip decompression" feature from djpeg, since the new
cropping feature is a superset of it.
Refer to #34 for discussion.
Closes #34
|
|
|
bd49803f
|
2016-02-19T08:53:33
|
|
Use consistent/modern code formatting for pointers
The convention used by libjpeg:
type * variable;
is not very common anymore, because it looks too much like
multiplication. Some (particularly C++ programmers) prefer to tuck the
pointer symbol against the type:
type* variable;
to emphasize that a pointer to a type is effectively a new type.
However, this can also be confusing, since defining multiple variables
on the same line would not work properly:
type* variable1, variable2; /* Only variable1 is actually a
pointer. */
This commit reformats the entirety of the libjpeg-turbo code base so
that it uses the same code formatting convention for pointers that the
TurboJPEG API code uses:
type *variable1, *variable2;
This seems to be the most common convention among C programmers, and
it is the convention used by other codec libraries, such as libpng and
libtiff.
|
|
|
fc11193e
|
2014-01-19T00:00:00
|
|
The Independent JPEG Group's JPEG software v9a
|
|
|
1e32fe31
|
2015-10-14T17:32:39
|
|
Replace INT32 with a new internal datatype (JLONG)
These days, INT32 is a commonly-defined datatype in system headers. We
cannot eliminate the definition of that datatype from jmorecfg.h, since
the INT32 typedef has technically been part of the libjpeg API since
version 5 (1994.) However, using INT32 internally is risky, because the
inclusion of a particular header (Xmd.h, for instance) could change the
definition of INT32 from long to int on 64-bit platforms and thus change
the internal behavior of libjpeg-turbo in unexpected ways (for instance,
failing to correctly set __INT32_IS_ACTUALLY_LONG to match the INT32
typedef-- perhaps as a result of including the wrong version of
jpeglib.h-- could cause libjpeg-turbo to produce incorrect results.)
The library has always been built in environments in which INT32 is
effectively long (on Windows, long is always 32-bit, so effectively it's
the same as int), so it makes sense to turn INT32 into an explicitly
long datatype. This ensures that libjpeg-turbo will always behave
consistently, regardless of the headers included at compile time.
Addresses a concern expressed in #26.
|
|
|
7e3acc0e
|
2015-10-10T10:25:46
|
|
Rename README, LICENSE, BUILDING text files
The IJG README file has been renamed to README.ijg, in order to avoid
confusion (many people were assuming that that was our project's README
file and weren't reading README-turbo.txt) and to lay the groundwork for
markdown versions of the libjpeg-turbo README and build instructions.
|
|
|
8e9cef2e
|
2015-09-21T12:57:41
|
|
Fix various issues reported by the UB sanitizers
Most of these involved left shifting a negative number, which is
technically undefined (although every modern compiler I'm aware of
will implement this by treating the signed integer as a 2's complement
unsigned integer-- the LEFT_SHIFT() macro just makes this behavior
explicit in order to shut up ubsan.) This also fixes a couple of
non-issues in the entropy codecs, whereby the sanitizer reported an
out-of-bounds index in the 4th argument of jpeg_make_d_derived_tbl().
In those cases, the index was actually out of bounds (caused by a
malformed JPEG image), but jpeg_make_d_derived_tbl() would have caught
the error and aborted prior to actually using the invalid address. Here
again, the fix was to make our intentions explicit so as to shut up
ubsan.
|
|
a2e6a9dd
|
2006-02-04T00:00:00
|
|
IJG R6b with x86SIMD V1.02
Independent JPEG Group's JPEG software release 6b
with x86 SIMD extension for IJG JPEG library version 1.02
|
|
489583f5
|
1996-02-07T00:00:00
|
|
The Independent JPEG Group's JPEG software v6a
|
|
|
bc79e068
|
1995-08-02T00:00:00
|
|
The Independent JPEG Group's JPEG software v6
|
|
|
a8b67c4f
|
1995-03-15T00:00:00
|
|
The Independent JPEG Group's JPEG software v5b
|
|
|
36a4cccc
|
1994-09-24T00:00:00
|
|
The Independent JPEG Group's JPEG software v5
|
|
1e247ac8
|
1998-03-28T00:00:00
|
|
The Independent JPEG Group's JPEG software v6b with arithmetic coding support
|
|
|
5829cb23
|
2012-01-15T00:00:00
|
|
The Independent JPEG Group's JPEG software v8d
|
|
989630f7
|
2010-01-10T00:00:00
|
|
The Independent JPEG Group's JPEG software v8
|
|
|
5996a25e
|
2009-06-27T00:00:00
|
|
The Independent JPEG Group's JPEG software v7
|
|
|
5ead57a3
|
1998-03-27T00:00:00
|
|
The Independent JPEG Group's JPEG software v6b
|
|
|
03e755bb
|
2015-07-21T17:36:18
|
|
Further improvements to partial image decoding
When using context-based upsampling, use a dummy color conversion
routine instead of a dummy row buffer. This improves performance
(since the actual color conversion routine no longer has to be called),
and it also fixes valgrind errors when decompressing to RGB565.
Valgrind previously complained, because using the RGB565 color
converter with the dummy row buffer was causing a table lookup with
undefined indices.
|
|
eb32cc1e
|
2015-06-25T03:44:36
|
|
Add a new libjpeg API function (jpeg_skip_scanlines()) to allow for partially decoding a JPEG image.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1582 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
5033f3e1
|
2014-05-18T18:33:44
|
|
Remove MS-DOS code and information, and adjust copyright headers to reflect the removal of features in r1307 and r1308. libjpeg-turbo has never supported MS-DOS, nor is it even possible for us to do so.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1312 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
bc56b754
|
2014-05-16T10:43:44
|
|
Get rid of the HAVE_PROTOTYPES configuration option, as well as the related JMETHOD and JPP macros. libjpeg-turbo has never supported compilers that don't handle prototypes. Doing so requires ansi2knr, which isn't even supported in the IJG code anymore.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1308 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
52ded876
|
2014-05-15T20:30:16
|
|
Remove all of the NEED_SHORT_EXTERNAL_NAMES stuff. There is scant information available as to which linkers ever had a 15-character global symbol name limit. AFAICT, it might have been a VMS and/or a.out BSD thing, but none of those platforms have ever been supported by libjpeg-turbo (nor are such systems supported by other open source libraries of this nature.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1307 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
333e9187
|
2014-05-12T00:34:08
|
|
Use 2-space indentation for the enums, to be consistent with the structs
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1291 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
b7753510
|
2014-05-11T09:36:25
|
|
Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1285 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
e5eaf374
|
2014-05-09T18:00:32
|
|
Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1278 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
a8eabfeb
|
2011-03-29T04:58:40
|
|
Create local round up function for jmemmgr.c so we can revert the original argument types of jround_up() without breaking the build on 64-bit Windows.
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.1.x@539 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
66f97e68
|
2010-11-23T05:49:54
|
|
Support arithmetic encoding and decoding
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@299 632fc199-4ca6-4c93-a231-07263d6284db
|
|
|
04899094
|
2010-02-26T23:01:19
|
|
Bleepin' Windows uses LLP64, not LP64
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@158 632fc199-4ca6-4c93-a231-07263d6284db
|