kc3-lang/libxkbcommon/doc/user-configuration.md

Download

User-configuration {#user-configuration}

This page describes how to add a custom layout or option so that it will be parsed by libxkbcommon.

@note For an introduction to XKB and keymap components, please see “@ref xkb-intro “””.

@warning The below requires libxkbcommon as keymap compiler and does not work in X11 sessions, because X servers have hard-coded paths.

@important An erroneous XKB configuration may make your keyboard unusable. Therefore it is advised to try custom configurations safely using xkbcli tools; see [debugging] for further details.

[debugging]: @ref testing-custom-config

@tableofcontents{html:2}

Data locations {#user-config-locations}

libxkbcommon searches the following paths for XKB configuration files:

  1. $XDG_CONFIG_HOME/xkb/, or $HOME/.config/xkb/ if the $XDG_CONFIG_HOME environment variable is not defined. See the XDG Base Directory Specification for further details. <!– [HACK] Doxygen requires this extra div –>

    @deprecated $HOME/.xkb/ as a legacy alternative to the previous XDG option. </div>

  2. $XKB_CONFIG_EXTRA_PATH if set, otherwise <sysconfdir>/xkb (on most distributions this is /etc/xkb).

  3. $XKB_CONFIG_ROOT if set, otherwise <datadir>/X11/xkb/ (path defined by the xkeyboard-config package, on most distributions this is /usr/share/X11/xkb).

A keymap created with xkb_keymap::xkb_keymap_new_from_names2() will look up those paths in order until the required data is found.

@note Where libxkbcommon runs in a privileged context, only the system (<datadir>) path is available.

Each directory should have one or more of the following subdirectories:

The majority of user-specific configurations involve modifying key symbols and this is what this document focuses on. For use-cases where a user may need to add new key types or compat entries the general approach remains the same. A detailed description for how to add those types or compat entries is out of scope for this document.

You should never need to add user-specific keycodes. Where a keycode is missing, the addition should be filed in the upstream xkeyboard-config project.

RMLVO vs KcCGST

Due to how XKB is configured, there is no such thing as a “layout” in XKB itself, or, indeed, any of the rules, models, variant, options ([RMLVO]) described in struct xkb_rule_names. [RMLVO] names are merely lookup keys in the rules file provided by xkeyboard-config to map to the correct keycode, compat, geometry (ignored by libxkbcommon), symbols and types ([KcCGST]). The [KcCGST] data is the one used by XKB and libxkbcommon to map keys to actual symbols.

[RMLVO]: @ref RMLVO-intro [KcCGST]: @ref KcCGST-intro

For example, a common [RMLVO] configuration is layout us, variant dvorak and option terminate:ctrl_alt_bksp. Using the default rules file and model this maps into the following [KcCGST] components:

@figure@figcaption Output of the command: xkbcli compile-keymap --kccgst --layout us --variant dvorak --options terminate:ctrl_alt_bksp @endfigcaption

xkb_keymap {
    xkb_keycodes  { include "evdev+aliases(qwerty)" };
    xkb_types     { include "complete"  };
    xkb_compat    { include "complete"  };
    xkb_symbols   { include "pc+us(dvorak)+inet(evdev)+terminate(ctrl_alt_bksp)"    };
    xkb_geometry  { include "pc(pc105)" };
};

@endfigure

A detailed explanation of how rules files convert [RMLVO] to [KcCGST] is out of scope for this document. See the rules file page instead.

Adding a layout {#user-config-layout}

Adding a layout requires that the user adds symbols in the correct location.

The default rules files (usually evdev) have a catch-all to map a layout, say foo, and a variant, say bar, into the bar section in the file <datadir>/X11/xkb/symbols/foo. This is sufficient to define a new keyboard layout. The example below defines the keyboard layout banana with an optional variant orange:

@figure@figcaption Content of $XDG_CONFIG_HOME/xkb/symbols/banana @endfigcaption

// Like a US layout but swap the top row so numbers are on Shift
default partial alphanumeric_keys
xkb_symbols "basic" {
    include "us(basic)"
    name[Group1]= "Banana (US)";

    key <AE01> { [ exclam,          1]     };
    key <AE02> { [ at,              2]     };
    key <AE03> { [ numbersign,      3]     };
    key <AE04> { [ dollar,          4]     };
    key <AE05> { [ percent,         5]     };
    key <AE06> { [ asciicircum,     6]     };
    key <AE07> { [ ampersand,       7]     };
    key <AE08> { [ asterisk,        8]     };
    key <AE09> { [ parenleft,       9]     };
    key <AE10> { [ parenright,      0]     };
    key <AE11> { [ underscore,      minus] };
    key <AE12> { [ plus,            equal] };
};

// Same as banana but map the euro sign to the 5 key
partial alphanumeric_keys
xkb_symbols "orange" {
    include "banana(basic)"
    name[Group1] = "Banana (Eurosign on 5)";
    include "eurosign(5)"
};

@endfigure

The default section is loaded when no variant is given. The first example sections uses include to populate with a symbols list defined elsewhere (here: section basic from the file symbols/us, aka. the default US keyboard layout) and overrides parts of these symbols. The effect of this section is to swap the numbers and symbols in the top-most row (compared to the US layout) but otherwise use the US layout.

The orange variant uses the banana symbols and includes a different section to define the eurosign. It does not specifically override any symbols.

The exact details of how xkb_symbols section works is out of scope for this document; see: @ref keymap-text-format-v1-v2 “”.

@remark This example uses a file name banana that should not clash with the system files in <datadir>/X11/xkb/symbols. Using the same file name than the system files is possible but may require special handling, see: @ref user-config-system-file-names “”.

Adding an option {#user-config-option}

For technical reasons, options do not have a catch-all to map option names to files and sections and must be specifically mapped by the user. This requires a custom rules file. As the evdev ruleset is hardcoded in many clients, the custom rules file must usually be named evdev.

@figure@figcaption Content of $XDG_CONFIG_HOME/xkb/rules/evdev @endfigcaption

// Mandatory to extend the
! include %S/evdev

! option     = symbols
  custom:foo = +custom(bar)
  custom:baz = +other(baz)

@endfigure

The include statement includes the system-provided evdev ruleset. This allows users to only override those options they need afterwards.

This rules file maps the [RMLVO] option custom:foo to the bar section in the symbols/custom file and the custom:baz option to the baz section in the symbols/other file. Note how the [RMLVO] option name may be different to the file or section name.

@important The order of the options matters! In this example, custom:foo will always be applied before custom:baz and both options will always be applied after the system ones, even if the order is different in the [RMLVO] configuration passed to libxkbcommon (e.g. with xkbcli). See the [related section][options-order] in the rules documentation for further details.

[options-order]: @ref irrelevant-options-order

The files themselves are similar to the layout examples in the previous section:

@figure@figcaption Content of $XDG_CONFIG_HOME/xkb/symbols/custom @endfigcaption

// map the Tilde key to nothing on the first shift level
partial alphanumeric_keys
xkb_symbols "bar" {
    key <TLDE> {        [      VoidSymbol ]       };
};

@endfigure

@figure@figcaption Content of $XDG_CONFIG_HOME/xkb/symbols/other @endfigcaption

// map first key in bottom row (Z in the US layout) to k/K
partial alphanumeric_keys
xkb_symbols "baz" {
    key <AB01> {        [      k, K ]       };
};

@endfigure

With these in place, a user may select any layout/variant together with the custom:foo and/or custom:baz options.

@remark This example uses file names custom and other that should not clash with the system files in <datadir>/X11/xkb/symbols. Using the same file name than the system files is possible but may require special handling, see: @ref user-config-system-file-names “”.

Using system file names {#user-config-system-file-names}

The previous examples use custom keymap files with file name that do not clash with the files in the system directory, <datadir>/X11/xkb/. It is possible to add a custom variant/option using the same file name than the system file, e.g. $XDG_CONFIG_HOME/xkb/symbols/us instead of $XDG_CONFIG_HOME/xkb/symbols/banana for the example in @ref user-config-layout “”.

Compatibility

@attention For libxkbcommon \< 1.9, the custom file must contain an explicit default section if the system file has one, else it may break the keyboard setup by including a section of the custom file instead of the system one. The custom default section should enforce that the system default section is included.<br/> The following example defines a broccoli layout variant: @figure@figcaption Content of $XDG_CONFIG_HOME/xkb/symbols/us @endfigcaption

// Explicit default section with no name required
default partial alphanumeric_keys
xkb_symbols { include "us(basic)" };

partial alphanumeric_keys
xkb_symbols "broccoli" {
    include "us(basic)"
    name[Group1] = "Broccoli";
    key <AD05> { [ b, B, U1F966 ]}; // 🥦
    include "level3(ralt_switch)"
};

@endfigure For libxkbcommon ≥ 1.9 an explicit default section is not required anymore: libxkbcommon will look up for the proper default section in the XKB paths: @figure@figcaption Content of $XDG_CONFIG_HOME/xkb/symbols/us @endfigcaption

// No default section required

partial alphanumeric_keys
xkb_symbols "broccoli" {
    include "us(basic)"
    name[Group1] = "Broccoli";
    key <AD05> { [ b, B, U1F966 ]}; // 🥦
    include "level3(ralt_switch)"
};

Overriding the system sections

One may override the system sections:

@warning It will affect all layouts/variants that depend on the system section. @warning Including the system section can lead to a circular import.

Therefore is it highly recommended to not override the system sections and prefer creating proper independent variants.

@since 1.11.0: It is possible to include the system section and avoid circular include by prepending <code>\%S</code> to the included file. See the @ref keymap-include-percent-expansion “corresponding documentation.

Discoverable layouts

@warning The below requires libxkbregistry as XKB lookup tool and does not work where clients parse the XML file directly.

The above sections apply only to the data files and require that the user knows about the existence of the new entries. To make custom entries discoverable by the configuration tools (e.g. the GNOME Control Center), the new entries must also be added to the XML file that is parsed by libxkbregistry. In most cases, this is the evdev.xml file in the rules directory.

The following tags are required:

`name`
- For *layouts*, this is the name of the corresponding *file*. - For *variant*, this is the name of the corresponding *section* in the file. - For *options*, this is the unique identifier used in the *rules* file (see @ref user-config-option ""), usually following the pattern `:`.
`shortDescription`
For layout and variants, this is the [ISO 639] language code.
`description`
This is the text that will be displayed to label the entry. For layouts and variants, this should be the same as `name[Group1]`.

See the xkeyboard-config documentation for further information.

The example below shows the XML file that would add the custom layout and custom options as outlined above to the XKB registry:

@figure@figcaption Content of $XDG_CONFIG_HOME/xkb/rules/evdev.xml @endfigcaption

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE xkbConfigRegistry SYSTEM "xkb.dtd">
<xkbConfigRegistry version="1.1">
  <layoutList>
<!-- Declare a new layout and its variants -->

    <layout>
<!-- Default variant: `default … xkb_symbols "…"` -->

      <configItem>
<!-- File name of $XDG_CONFIG_HOME/xkb/symbols/banana -->

        <name>banana</name>
        <shortDescription>ban</shortDescription>
<!-- Label: use the value of `name[Group1]` -->

        <description>Banana (US)</description>
      </configItem>
<!-- Other variants -->

      <variantList>
        <variant>
          <configItem>
<!-- Section name in $XDG_CONFIG_HOME/xkb/symbols/banana -->

            <name>orange</name>
            <shortDescription>or</shortDescription>
<!-- Label: use the value of `name[Group1]` -->

            <description>Banana (Eurosign on 5)</description>
          </configItem>
        </variant>
      </variantList>
    </layout>
<!-- Update a *system* layout and its variants -->

    <layout>
      <configItem>
        <!-- NOTE: Only minimal data is required here,
             since it will be merged with the system registry -->
        <name>us</name>
      </configItem>
      <variantList>
        <variant>
          <configItem>
<!-- Section name in $XDG_CONFIG_HOME/xkb/symbols/us -->

            <name>broccoli</name>
            <shortDescription>bro</shortDescription>
<!-- Label: use the value of `name[Group1]` -->

            <description>Broccoli</description>
          </configItem>
        </variant>
      </variantList>
    </layout>
  </layoutList>
  <optionList>
    <group allowMultipleSelection="true">
      <configItem>
        <name>custom</name>
        <description>Custom options</description>
      </configItem>
      <option>
      <configItem>
        <name>custom:foo</name>
        <description>Map Tilde to nothing</description>
      </configItem>
      </option>
      <option>
      <configItem>
        <name>custom:baz</name>
        <description>Map Z to K</description>
      </configItem>
      </option>
    </group>
  </optionList>
</xkbConfigRegistry>

@endfigure

The default behavior of libxkbregistry ensures that the new layout and options are added to the system-provided layouts and options.

For details on the XML format, see the DTD in <datadir>/X11/xkb/rules/xkb.dtd and the system-provided XML files <datadir>/X11/xkb/rules/*.xml.

@note Depending on the desktop environment, it may require restarting the session in order to make the configuration changes effective.

@note It is advised to try the custom configuration before restarting the session using the various xkbcli tools. See [debugging] for further details.

Source

Download

kmx.io     mail     discord kmxgit v0.4.0