kmx git

Commit	Date	Message
8c63061e	2011-10-23T20:50:52	Allow a fixed speed difference between memory and GPU clock speed that will change memory speed when GPU speed is changed in autotune mode.
5976f6b3	2011-10-14T21:51:55	Get rid of unused variable.
0ae3f718	2011-09-23T10:45:43	Check last temperature we reached and don't change fan speed if it's already correcting.
b8ea0dd1	2011-09-17T13:23:58	Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.
5a24c282	2011-09-16T16:46:14	Try to set temperature regardless of whether get fanspeed fails. This may need to be reverted if it causes problems.
12e99c83	2011-09-16T16:42:11	Initialise all the iSizes of the ADL structures for completeness.
07c21bcb	2011-09-16T10:40:58	Don't forget to set the actual fanspeed too!
3c38adc9	2011-09-16T10:27:36	Only set the speed once, but set it only if fanspeed get says the card is ok and ready.
67fe6ab7	2011-09-16T10:26:25	Don't both with adapter speed set as it has no effect on mining speed.
92e1ffd3	2011-09-16T08:31:27	Store the targetfan even if the later getfanspeed fails in case it's temporary.
8feb661d	2011-09-15T20:46:39	Set the fanspeed in coarse rounded up values and then ever finer grained values in case the card does not support fine values.
3f10e80a	2011-09-15T12:18:30	If the user defined flag is not set on fanspeed, set the fanspeed with it first.
87ec3f47	2011-09-15T11:21:54	Convert fanspeed management to default on exit.
918ec7b0	2011-09-14T23:01:07	Enable adl earlier to allow values to be set in init_adl or they're silently ignored!
1db6ab0b	2011-09-14T22:18:49	Set targetfan when fanspeed is set on parameters.
2e09eee7	2011-09-14T21:45:04	Use the gpu_fan set value as the starting fan speed. Don't try and change the value if get() doesn't match as it's unreliable, just save the reentrant value. Limit fanspeeds to reported iMax and iMin.
88eb514c	2011-09-11T11:57:08	Only display supported values from fanspeed on change settings.
b4009ada	2011-09-11T11:47:22	Remove redundant check.
ebae03f2	2011-09-11T11:38:02	Do not bother resetting values to old ones if changes to GPU parameters report failure, instead returning a failure code only if the return value from get() differs.
dff1a81d	2011-09-11T11:25:28	Use a re-entrant value to store what fanspeed we're trying to set in case the card doesn't support small changes. Force it to a multiple of 10% if it fails on trying to speed up the fan.
076677dd	2011-09-11T11:08:01	Flag any devices with autofan or autogpu as being managed.
a602f4e5	2011-09-11T11:06:52	Only force the adapter speed to high if we've flagged this device as being managed.
25c77ae8	2011-09-09T11:53:45	Only display values in the log if they're supported and standardise device log line printing.
2fafdab9	2011-09-09T10:03:10	Allow adapterid 0 cards to enumerate as a device as they will be non-AMD cards, and enable ADL on any AMD card.
b7d81781	2011-09-08T14:10:55	Setting the hysteresis is unlikely to be useful on the fly and doesn't belong in the per-gpu submenu.
0e1c2916	2011-09-08T14:05:41	Display fan range in autofan status.
e0a9f1aa	2011-09-08T13:53:10	Allow temperature targets to be set on a per-card basis on the command line.
d6f3bd05	2011-09-08T13:33:24	Display which GPU has overheated in warning message.
b50041c8	2011-09-08T13:29:13	Allow per-device fan ranges to be set and use them in auto-fan mode.
9b5cd618	2011-09-08T13:04:39	Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.
7ea7f5f3	2011-09-08T10:51:32	Allow temperatures greater than 100 degrees.
4628db5b	2011-09-07T10:44:57	Change the fan speed by only 5% if it's over the target temperature but less than the hysteresis value to minimise overshoot down in temperature.
3997f308	2011-09-07T10:43:26	Add a thermal cutoff option as well and set it to 95 degrees by default.
311420db	2011-09-07T10:03:06	Flag adl as active if any card is successfully activated.
058303bc	2011-09-07T10:00:10	Only reset values on exiting if we've ever modified them.
b8be1e6c	2011-09-07T09:17:51	Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay.
f89c032d	2011-09-06T12:04:23	The ° character is not reliably shown on all platforms so remove it.
fd23532b	2011-09-06T09:41:58	Make adl attempt to compile only on win32 or linux since there is no support for it on onther platforms, and fix sleep() definition on win32.
16aff37c	2011-09-06T09:36:42	Fix compilation errors on mingw32 to do with order of pulling in headers, curses.h and definition of bool.
9f618f4a	2011-09-05T17:14:09	Lower profile settings cannot be higher than higher profile ones so link any drops in settings.
ca379355	2011-09-05T16:14:43	Ramp up the fan more if we're over target temperature.
bc972440	2011-09-05T16:05:04	Provide locking around all adl calls to prevent races.
666d724b	2011-09-05T13:48:06	Set a safe starting fan speed if we're automanaging the speeds.
5fc56a45	2011-09-05T09:36:43	Force the speed to high on startup and restore it to whatever the setting was on exit.
cb29fb7d	2011-09-05T09:04:15	Remove the safety checks in speed setting since confirmation is done first in the menu, then show the new current values after a short pause.
ee06a3ba	2011-09-05T08:33:00	Limit fanspeed to 85% properly when temperature is below overheat levels.
40491cd5	2011-09-05T08:32:31	Change default hysteresis to 3 degrees for lower average fanspeeds.
47f1a759	2011-09-04T23:23:31	Implement setting the GPU powertune value of all devices or each device as a comma separated value.
656bacc5	2011-09-04T23:14:36	Get the value of powertune in get_stats.
7711c6fb	2011-09-04T23:10:57	Implement changing of powertune value from the GPU change settings menu.
bd292258	2011-09-04T22:56:19	Add support for monitoring powertune setting.
3a5663ca	2011-09-04T22:25:31	Implement setting the GPU fan speed of all devices or each device as a comma separated value.
8ae273c5	2011-09-04T22:08:42	Implement setting the GPU voltage of all devices or each device as a comma separated value.
54bc30ce	2011-09-04T22:01:58	Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.
ec8808d0	2011-09-04T21:55:06	Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.
12a167a3	2011-09-04T13:57:40	Implement menus to change temperature limits.
1ed21937	2011-09-04T10:19:29	Combine all stats collating into one function to avoid repeating function calls on each variable.
e9f886d8	2011-09-04T09:43:53	Allow target, overheat and hysteresis temperatures to be set from command line.
847adf68	2011-09-04T07:17:07	Add a small amount of hysteresis before lowering clock speed.
9b7262ec	2011-09-04T00:36:14	Clean up by setting performance profiles and fan settings to startup levels on exit.
e9b5885e	2011-09-03T22:30:11	Add a gpu autotune option which adjusts GPU speed to maintain a target temperature within the bounds of the default GPU speed and any overclocking set.
dcc97e45	2011-09-03T15:46:57	Add an --auto-fan command line option to allow all GPUs to have autofan enabled from startup.
495adcbf	2011-09-03T15:33:53	Implement auto fanspeed adjustment to maintain a target temperature and fanspeed below 85%, with an overheat check that will speed the fan up to 100%.
320a5f2a	2011-09-03T14:52:25	Make sure to read off the value in RPM only.
bf2669b8	2011-09-03T14:45:37	Minor corrections to set fan speed by percentage.
07b847f7	2011-09-03T14:33:05	Implement fan speed setting.
3681ae84	2011-09-03T13:28:49	Implement changing memory speed and voltage on the fly.
35ace463	2011-09-03T13:02:21	Enable changing of engine clock setting on the fly.
d57cd919	2011-09-03T10:53:35	Implement ATI ADL support for GPU parameter monitoring now and setting later (temp, fan, clocks etc.). Check for the presence of the ADL header files in ADL_SDK. Import adl_functions.h from amd overdrive ctrl. Implement a setup function that tries to detect GPUs that support the ADL and link in the parameters into the gpus struct. Put a summary of monitoring information from the GPU menu.

8c63061e

2011-10-23T20:50:52

Allow a fixed speed difference between memory and GPU clock speed that will change memory speed when GPU speed is changed in autotune mode.

5976f6b3

2011-10-14T21:51:55

Get rid of unused variable.

0ae3f718

2011-09-23T10:45:43

Check last temperature we reached and don't change fan speed if it's already correcting.

b8ea0dd1

2011-09-17T13:23:58

Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.

5a24c282

2011-09-16T16:46:14

Try to set temperature regardless of whether get fanspeed fails. This may need to be reverted if it causes problems.

12e99c83

2011-09-16T16:42:11

Initialise all the iSizes of the ADL structures for completeness.

07c21bcb

2011-09-16T10:40:58

Don't forget to set the actual fanspeed too!

3c38adc9

2011-09-16T10:27:36

Only set the speed once, but set it only if fanspeed get says the card is ok and ready.

67fe6ab7

2011-09-16T10:26:25

Don't both with adapter speed set as it has no effect on mining speed.

92e1ffd3

2011-09-16T08:31:27

Store the targetfan even if the later getfanspeed fails in case it's temporary.

8feb661d

2011-09-15T20:46:39

Set the fanspeed in coarse rounded up values and then ever finer grained values in case the card does not support fine values.

3f10e80a

2011-09-15T12:18:30

If the user defined flag is not set on fanspeed, set the fanspeed with it first.

87ec3f47

2011-09-15T11:21:54

Convert fanspeed management to default on exit.

918ec7b0

2011-09-14T23:01:07

Enable adl earlier to allow values to be set in init_adl or they're silently ignored!

1db6ab0b

2011-09-14T22:18:49

Set targetfan when fanspeed is set on parameters.

2e09eee7

2011-09-14T21:45:04

Use the gpu_fan set value as the starting fan speed. Don't try and change the value if get() doesn't match as it's unreliable, just save the reentrant value. Limit fanspeeds to reported iMax and iMin.

88eb514c

2011-09-11T11:57:08

Only display supported values from fanspeed on change settings.

b4009ada

2011-09-11T11:47:22

Remove redundant check.

ebae03f2

2011-09-11T11:38:02

Do not bother resetting values to old ones if changes to GPU parameters report failure, instead returning a failure code only if the return value from get() differs.

dff1a81d

2011-09-11T11:25:28

Use a re-entrant value to store what fanspeed we're trying to set in case the card doesn't support small changes. Force it to a multiple of 10% if it fails on trying to speed up the fan.

076677dd

2011-09-11T11:08:01

Flag any devices with autofan or autogpu as being managed.

a602f4e5

2011-09-11T11:06:52

Only force the adapter speed to high if we've flagged this device as being managed.

25c77ae8

2011-09-09T11:53:45

Only display values in the log if they're supported and standardise device log line printing.

2fafdab9

2011-09-09T10:03:10

Allow adapterid 0 cards to enumerate as a device as they will be non-AMD cards, and enable ADL on any AMD card.

b7d81781

2011-09-08T14:10:55

Setting the hysteresis is unlikely to be useful on the fly and doesn't belong in the per-gpu submenu.

0e1c2916

2011-09-08T14:05:41

Display fan range in autofan status.

e0a9f1aa

2011-09-08T13:53:10

Allow temperature targets to be set on a per-card basis on the command line.

d6f3bd05

2011-09-08T13:33:24

Display which GPU has overheated in warning message.

b50041c8

2011-09-08T13:29:13

Allow per-device fan ranges to be set and use them in auto-fan mode.

9b5cd618

2011-09-08T13:04:39

Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.

7ea7f5f3

2011-09-08T10:51:32

Allow temperatures greater than 100 degrees.

4628db5b

2011-09-07T10:44:57

Change the fan speed by only 5% if it's over the target temperature but less than the hysteresis value to minimise overshoot down in temperature.

3997f308

2011-09-07T10:43:26

Add a thermal cutoff option as well and set it to 95 degrees by default.

311420db

2011-09-07T10:03:06

Flag adl as active if any card is successfully activated.

058303bc

2011-09-07T10:00:10

Only reset values on exiting if we've ever modified them.

b8be1e6c

2011-09-07T09:17:51

Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay.

f89c032d

2011-09-06T12:04:23

The ° character is not reliably shown on all platforms so remove it.

fd23532b

2011-09-06T09:41:58

Make adl attempt to compile only on win32 or linux since there is no support for it on onther platforms, and fix sleep() definition on win32.

16aff37c

2011-09-06T09:36:42

Fix compilation errors on mingw32 to do with order of pulling in headers, curses.h and definition of bool.

9f618f4a

2011-09-05T17:14:09

Lower profile settings cannot be higher than higher profile ones so link any drops in settings.

ca379355

2011-09-05T16:14:43

Ramp up the fan more if we're over target temperature.

bc972440

2011-09-05T16:05:04

Provide locking around all adl calls to prevent races.

666d724b

2011-09-05T13:48:06

Set a safe starting fan speed if we're automanaging the speeds.

5fc56a45

2011-09-05T09:36:43

Force the speed to high on startup and restore it to whatever the setting was on exit.

cb29fb7d

2011-09-05T09:04:15

Remove the safety checks in speed setting since confirmation is done first in the menu, then show the new current values after a short pause.

ee06a3ba

2011-09-05T08:33:00

Limit fanspeed to 85% properly when temperature is below overheat levels.

40491cd5

2011-09-05T08:32:31

Change default hysteresis to 3 degrees for lower average fanspeeds.

47f1a759

2011-09-04T23:23:31

Implement setting the GPU powertune value of all devices or each device as a comma separated value.

656bacc5

2011-09-04T23:14:36

Get the value of powertune in get_stats.

7711c6fb

2011-09-04T23:10:57

Implement changing of powertune value from the GPU change settings menu.

bd292258

2011-09-04T22:56:19

Add support for monitoring powertune setting.

3a5663ca

2011-09-04T22:25:31

Implement setting the GPU fan speed of all devices or each device as a comma separated value.

8ae273c5

2011-09-04T22:08:42

Implement setting the GPU voltage of all devices or each device as a comma separated value.

54bc30ce

2011-09-04T22:01:58

Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.

ec8808d0

2011-09-04T21:55:06

Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.

12a167a3

2011-09-04T13:57:40

Implement menus to change temperature limits.

1ed21937

2011-09-04T10:19:29

Combine all stats collating into one function to avoid repeating function calls on each variable.

e9f886d8

2011-09-04T09:43:53

Allow target, overheat and hysteresis temperatures to be set from command line.

847adf68

2011-09-04T07:17:07

Add a small amount of hysteresis before lowering clock speed.

9b7262ec

2011-09-04T00:36:14

Clean up by setting performance profiles and fan settings to startup levels on exit.

e9b5885e

2011-09-03T22:30:11

Add a gpu autotune option which adjusts GPU speed to maintain a target temperature within the bounds of the default GPU speed and any overclocking set.

dcc97e45

2011-09-03T15:46:57

Add an --auto-fan command line option to allow all GPUs to have autofan enabled from startup.

495adcbf

2011-09-03T15:33:53

Implement auto fanspeed adjustment to maintain a target temperature and fanspeed below 85%, with an overheat check that will speed the fan up to 100%.

320a5f2a

2011-09-03T14:52:25

Make sure to read off the value in RPM only.

bf2669b8

2011-09-03T14:45:37

Minor corrections to set fan speed by percentage.

07b847f7

2011-09-03T14:33:05

Implement fan speed setting.

3681ae84

2011-09-03T13:28:49

Implement changing memory speed and voltage on the fly.

35ace463

2011-09-03T13:02:21

Enable changing of engine clock setting on the fly.

d57cd919

2011-09-03T10:53:35

Implement ATI ADL support for GPU parameter monitoring now and setting later (temp, fan, clocks etc.). Check for the presence of the ADL header files in ADL_SDK. Import adl_functions.h from amd overdrive ctrl. Implement a setup function that tries to detect GPUs that support the ADL and link in the parameters into the gpus struct. Put a summary of monitoring information from the GPU menu.

thodg/cgminer/adl.c

adl.c

Log