|
06fd9c4a
|
2012-01-26T23:27:10
|
|
Detect dual GPU cards by iterating through all GPUs, finding ones without fanspeed and matching twins with fanspeed one bus ID apart.
|
|
487327f8
|
2012-01-26T14:06:31
|
|
Remove compile warning
|
|
|
4995b7c2
|
2012-01-25T16:34:39
|
|
On dual GPUs, only autotune the shared fan once per gpu autotune cycle.
|
|
|
c009c6cd
|
2012-01-25T16:16:28
|
|
Don't try to explicitly drift to exactly the target temperature, aim for just below it.
|
|
|
312724ce
|
2012-01-25T15:48:28
|
|
Adjust fan speed gently while in the optimal range when temperature is drifting to minimise overshoot in either direction.
|
|
|
9549dacf
|
2012-01-25T01:19:58
|
|
Detect dual GPU cards via the indirect information of - 1st card has a fan controller. 2nd card does not have a fan controller, cards share the same
device name, and are one bus ID apart. Use this information to create paired devices, displaying the fan speed on both devices and using the hottest
temperature from either GPU to control the overall fanspeed.
|
|
|
990bb4a9
|
2012-01-23T10:54:21
|
|
Set iSize for thermal device enum first.
|
|
|
2d29cdb6
|
2012-01-23T09:25:53
|
|
Read off lpThermalControllerInfo from each ADL device.
|
|
|
1e1519e9
|
2012-01-23T09:20:21
|
|
Add ADL_Overdrive5_ThermalDevices_Enum interface.
|
|
|
ec2c0b78
|
2012-01-22T18:24:55
|
|
Add API commands: config, switchpool, gpu settings, save
|
|
845961af
|
2012-01-05T19:26:01
|
|
Refactor to abstract device-specific code
|
|
|
400cb21d
|
2011-12-24T08:06:53
|
|
Off by one error in performance level.
|
|
|
f4d657ee
|
2011-12-24T07:35:42
|
|
Only adjust gpu engine speed in autotune mode if the gpu is currently at the performance level of that being adjusted.
|
|
|
8c63061e
|
2011-10-23T20:50:52
|
|
Allow a fixed speed difference between memory and GPU clock speed that will change memory speed when GPU speed is changed in autotune mode.
|
|
|
5976f6b3
|
2011-10-14T21:51:55
|
|
Get rid of unused variable.
|
|
|
0ae3f718
|
2011-09-23T10:45:43
|
|
Check last temperature we reached and don't change fan speed if it's already correcting.
|
|
|
b8ea0dd1
|
2011-09-17T13:23:58
|
|
Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.
|
|
|
5a24c282
|
2011-09-16T16:46:14
|
|
Try to set temperature regardless of whether get fanspeed fails. This may need to be reverted if it causes problems.
|
|
|
12e99c83
|
2011-09-16T16:42:11
|
|
Initialise all the iSizes of the ADL structures for completeness.
|
|
|
07c21bcb
|
2011-09-16T10:40:58
|
|
Don't forget to set the actual fanspeed too!
|
|
|
3c38adc9
|
2011-09-16T10:27:36
|
|
Only set the speed once, but set it only if fanspeed get says the card is ok and ready.
|
|
|
67fe6ab7
|
2011-09-16T10:26:25
|
|
Don't both with adapter speed set as it has no effect on mining speed.
|
|
|
92e1ffd3
|
2011-09-16T08:31:27
|
|
Store the targetfan even if the later getfanspeed fails in case it's temporary.
|
|
|
8feb661d
|
2011-09-15T20:46:39
|
|
Set the fanspeed in coarse rounded up values and then ever finer grained values in case the card does not support fine values.
|
|
|
3f10e80a
|
2011-09-15T12:18:30
|
|
If the user defined flag is not set on fanspeed, set the fanspeed with it first.
|
|
|
87ec3f47
|
2011-09-15T11:21:54
|
|
Convert fanspeed management to default on exit.
|
|
|
918ec7b0
|
2011-09-14T23:01:07
|
|
Enable adl earlier to allow values to be set in init_adl or they're silently ignored!
|
|
|
1db6ab0b
|
2011-09-14T22:18:49
|
|
Set targetfan when fanspeed is set on parameters.
|
|
|
2e09eee7
|
2011-09-14T21:45:04
|
|
Use the gpu_fan set value as the starting fan speed.
Don't try and change the value if get() doesn't match as it's unreliable, just save the reentrant value.
Limit fanspeeds to reported iMax and iMin.
|
|
|
88eb514c
|
2011-09-11T11:57:08
|
|
Only display supported values from fanspeed on change settings.
|
|
|
b4009ada
|
2011-09-11T11:47:22
|
|
Remove redundant check.
|
|
|
ebae03f2
|
2011-09-11T11:38:02
|
|
Do not bother resetting values to old ones if changes to GPU parameters report failure, instead returning a failure code only if the return value from get() differs.
|
|
|
dff1a81d
|
2011-09-11T11:25:28
|
|
Use a re-entrant value to store what fanspeed we're trying to set in case the card doesn't support small changes.
Force it to a multiple of 10% if it fails on trying to speed up the fan.
|
|
|
076677dd
|
2011-09-11T11:08:01
|
|
Flag any devices with autofan or autogpu as being managed.
|
|
|
a602f4e5
|
2011-09-11T11:06:52
|
|
Only force the adapter speed to high if we've flagged this device as being managed.
|
|
|
25c77ae8
|
2011-09-09T11:53:45
|
|
Only display values in the log if they're supported and standardise device log line printing.
|
|
|
2fafdab9
|
2011-09-09T10:03:10
|
|
Allow adapterid 0 cards to enumerate as a device as they will be non-AMD cards, and enable ADL on any AMD card.
|
|
|
b7d81781
|
2011-09-08T14:10:55
|
|
Setting the hysteresis is unlikely to be useful on the fly and doesn't belong in the per-gpu submenu.
|
|
|
0e1c2916
|
2011-09-08T14:05:41
|
|
Display fan range in autofan status.
|
|
|
e0a9f1aa
|
2011-09-08T13:53:10
|
|
Allow temperature targets to be set on a per-card basis on the command line.
|
|
|
d6f3bd05
|
2011-09-08T13:33:24
|
|
Display which GPU has overheated in warning message.
|
|
|
b50041c8
|
2011-09-08T13:29:13
|
|
Allow per-device fan ranges to be set and use them in auto-fan mode.
|
|
|
9b5cd618
|
2011-09-08T13:04:39
|
|
Implement accepting a range of engine speeds as well to allow a lower limit to be specified on the command line.
|
|
|
7ea7f5f3
|
2011-09-08T10:51:32
|
|
Allow temperatures greater than 100 degrees.
|
|
|
4628db5b
|
2011-09-07T10:44:57
|
|
Change the fan speed by only 5% if it's over the target temperature but less than the hysteresis value to minimise overshoot down in temperature.
|
|
|
3997f308
|
2011-09-07T10:43:26
|
|
Add a thermal cutoff option as well and set it to 95 degrees by default.
|
|
|
311420db
|
2011-09-07T10:03:06
|
|
Flag adl as active if any card is successfully activated.
|
|
|
058303bc
|
2011-09-07T10:00:10
|
|
Only reset values on exiting if we've ever modified them.
|
|
|
b8be1e6c
|
2011-09-07T09:17:51
|
|
Ignore whether the display is active or not since only display enabled devices work this way, and we skip over repeat entries anwyay.
|
|
|
f89c032d
|
2011-09-06T12:04:23
|
|
The ° character is not reliably shown on all platforms so remove it.
|
|
|
fd23532b
|
2011-09-06T09:41:58
|
|
Make adl attempt to compile only on win32 or linux since there is no support for it on onther platforms, and fix sleep() definition on win32.
|
|
|
16aff37c
|
2011-09-06T09:36:42
|
|
Fix compilation errors on mingw32 to do with order of pulling in headers, curses.h and definition of bool.
|
|
|
9f618f4a
|
2011-09-05T17:14:09
|
|
Lower profile settings cannot be higher than higher profile ones so link any drops in settings.
|
|
|
ca379355
|
2011-09-05T16:14:43
|
|
Ramp up the fan more if we're over target temperature.
|
|
|
bc972440
|
2011-09-05T16:05:04
|
|
Provide locking around all adl calls to prevent races.
|
|
|
666d724b
|
2011-09-05T13:48:06
|
|
Set a safe starting fan speed if we're automanaging the speeds.
|
|
|
5fc56a45
|
2011-09-05T09:36:43
|
|
Force the speed to high on startup and restore it to whatever the setting was on exit.
|
|
|
cb29fb7d
|
2011-09-05T09:04:15
|
|
Remove the safety checks in speed setting since confirmation is done first in the menu, then show the new current values after a short pause.
|
|
|
ee06a3ba
|
2011-09-05T08:33:00
|
|
Limit fanspeed to 85% properly when temperature is below overheat levels.
|
|
|
40491cd5
|
2011-09-05T08:32:31
|
|
Change default hysteresis to 3 degrees for lower average fanspeeds.
|
|
|
47f1a759
|
2011-09-04T23:23:31
|
|
Implement setting the GPU powertune value of all devices or each device as a comma separated value.
|
|
|
656bacc5
|
2011-09-04T23:14:36
|
|
Get the value of powertune in get_stats.
|
|
|
7711c6fb
|
2011-09-04T23:10:57
|
|
Implement changing of powertune value from the GPU change settings menu.
|
|
|
bd292258
|
2011-09-04T22:56:19
|
|
Add support for monitoring powertune setting.
|
|
|
3a5663ca
|
2011-09-04T22:25:31
|
|
Implement setting the GPU fan speed of all devices or each device as a comma separated value.
|
|
|
8ae273c5
|
2011-09-04T22:08:42
|
|
Implement setting the GPU voltage of all devices or each device as a comma separated value.
|
|
|
54bc30ce
|
2011-09-04T22:01:58
|
|
Implement setting the GPU memory clock speed of all devices or each device as a comma separated value.
|
|
|
ec8808d0
|
2011-09-04T21:55:06
|
|
Implement setting the GPU engine clock speed of all devices or each device as a comma separated value.
|
|
|
12a167a3
|
2011-09-04T13:57:40
|
|
Implement menus to change temperature limits.
|
|
|
1ed21937
|
2011-09-04T10:19:29
|
|
Combine all stats collating into one function to avoid repeating function calls on each variable.
|
|
|
e9f886d8
|
2011-09-04T09:43:53
|
|
Allow target, overheat and hysteresis temperatures to be set from command line.
|
|
|
847adf68
|
2011-09-04T07:17:07
|
|
Add a small amount of hysteresis before lowering clock speed.
|
|
|
9b7262ec
|
2011-09-04T00:36:14
|
|
Clean up by setting performance profiles and fan settings to startup levels on exit.
|
|
|
e9b5885e
|
2011-09-03T22:30:11
|
|
Add a gpu autotune option which adjusts GPU speed to maintain a target temperature within the bounds of the default GPU speed and any overclocking set.
|
|
|
dcc97e45
|
2011-09-03T15:46:57
|
|
Add an --auto-fan command line option to allow all GPUs to have autofan enabled from startup.
|
|
|
495adcbf
|
2011-09-03T15:33:53
|
|
Implement auto fanspeed adjustment to maintain a target temperature and fanspeed below 85%, with an overheat check that will speed the fan up to 100%.
|
|
|
320a5f2a
|
2011-09-03T14:52:25
|
|
Make sure to read off the value in RPM only.
|
|
|
bf2669b8
|
2011-09-03T14:45:37
|
|
Minor corrections to set fan speed by percentage.
|
|
|
07b847f7
|
2011-09-03T14:33:05
|
|
Implement fan speed setting.
|
|
|
3681ae84
|
2011-09-03T13:28:49
|
|
Implement changing memory speed and voltage on the fly.
|
|
|
35ace463
|
2011-09-03T13:02:21
|
|
Enable changing of engine clock setting on the fly.
|
|
|
d57cd919
|
2011-09-03T10:53:35
|
|
Implement ATI ADL support for GPU parameter monitoring now and setting later (temp, fan, clocks etc.).
Check for the presence of the ADL header files in ADL_SDK.
Import adl_functions.h from amd overdrive ctrl.
Implement a setup function that tries to detect GPUs that support the ADL and link in the parameters into the gpus struct.
Put a summary of monitoring information from the GPU menu.
|