|
a1edc7db
|
2012-07-15T05:37:49
|
|
Bugfix: Fix build without curses but with OpenCL
|
|
29c0f7bd
|
2012-06-28T09:42:24
|
|
Detect large swings in temperature when below the target temperature range and change fan by amounts dependant on the value of tdiff.
|
|
|
e16452f0
|
2012-06-28T09:26:33
|
|
Adjust the fanspeed by the magnitude of the temperature difference when in the optimal range.
|
|
|
55aaa7c1
|
2012-06-28T09:11:29
|
|
Slightly different message since restart may not be successful.
|
|
|
07045055
|
2012-06-28T09:07:22
|
|
Revert "Restarting cgminer from within after ADL has been corrupted only leads to a crash. Display a warning only and disable fanspeed monitoring."
This reverts commit 07212db106a1cc654affe3b95bf8acff7b8ed752.
Reverting this did not fix the crashes people were having with ADL failing after a week and removed the functionality this patch originally intended.
|
|
|
057a38eb
|
2012-06-22T13:37:32
|
|
When disabling fanspeed monitoring on adl failure, remove any twin GPU association. This could have been leading to hangs on machines with dual GPU cards when ADL failed.
|
|
|
1e388833
|
2012-06-14T11:24:32
|
|
Consider the fan optimal if fanspeed is dropping but within the optimal speed window.
|
|
|
59679c57
|
2012-06-12T21:02:59
|
|
Only adjust GPU speed up if the fanspeed is within the normal fanrange and hasn't been turned to maximum speed under overheat conditions.
|
|
|
07212db1
|
2012-05-31T08:34:06
|
|
Restarting cgminer from within after ADL has been corrupted only leads to a crash. Display a warning only and disable fanspeed monitoring.
|
|
|
23b224fa
|
2012-05-06T12:01:04
|
|
Reinit_adl is no longer used.
|
|
|
46a679f3
|
2012-05-05T12:55:00
|
|
Revert "Provide simple macros for the repeated use of checking the first value of the input char with strncasecmp."
This reverts commit 87708a6a0e151401aee6cebf624940467993707b.
Broken.
|
|
|
87708a6a
|
2012-05-04T23:05:00
|
|
Provide simple macros for the repeated use of checking the first value of the input char with strncasecmp.
|
|
|
f5f089f5
|
2012-04-23T17:40:47
|
|
Add a --gpu-map option which will allow arbitrarily mapping ADL devices to OpenCL devices for instances where association by enumeration alone fails.
|
|
|
b8778839
|
2012-04-21T02:36:19
|
|
Merge branch 'master' into unify_drivers
Conflicts:
cgminer.c
|
|
|
dc70fe9c
|
2012-04-14T17:38:31
|
|
Do a complete cgminer restart if the ATI Display Library fails, as it does on windows after running for some time, when fanspeed reporting fails.
|
|
|
1152b4b4
|
2012-04-14T00:18:00
|
|
Re-initialising ADL simply made the driver fail since it is corruption over time within the windows driver that's responsible.
Revert "Attempt to re-initialise ADL should a device that previously reported fanspeed stops reporting it."
This reverts commit d4c513030f6d6da4cb54c0d1499d332a3987c376.
|
|
|
d4c51303
|
2012-03-29T11:47:28
|
|
Attempt to re-initialise ADL should a device that previously reported fanspeed stops reporting it.
|
|
|
43ef4e04
|
2012-03-29T10:51:59
|
|
Move the ADL setup and clearing to separate functions and provide a reinit_adl function to be used when adl fails while running.
|
|
|
2f715203
|
2012-03-28T22:36:48
|
|
Set the starting fanspeed to a safe and fairly neutral 50% when autofan is enabled.
|
|
|
7458927f
|
2012-03-28T04:25:54
|
|
Merge pull request #155 from luke-jr/no_curses
Make curses TUI support optional at compile-time.
|
|
eeec9809
|
2012-03-23T01:50:45
|
|
code changes for supporting a simple device history
|
|
|
f05a319e
|
2012-03-18T21:06:47
|
|
CGPU API for device names
|
|
|
ed8382c8
|
2012-03-12T14:56:05
|
|
Make curses TUI support optional at compile-time.
|
|
|
28f99beb
|
2012-02-26T16:45:03
|
|
Use the return value of fan_autotune to set fan_optimal instead of passing it as a pointer.
|
|
|
d48faf39
|
2012-02-26T16:40:05
|
|
Pass the lasttemp from the device we're using to adjust fanspeed in twin devices.
|
|
|
0d083b63
|
2012-02-22T14:52:57
|
|
Left out an else after the if statement.
|
|
|
b77656b7
|
2012-02-22T14:39:22
|
|
If we're well below the target temperature, increase gpu engine speed back to maximum in case we have gotten lost between profiles during an idle
period.
|
|
|
03f4f7e6
|
2012-02-22T14:26:29
|
|
We should be setting the value of fan_optimal, not its address.
|
|
|
083c6763
|
2012-02-22T10:44:21
|
|
Revert "Fan control should be fast enough to adjust now without needing to set a high starting speed."
This reverts commit e69080e987d83c39b50c8dd97829966a48908051.
On 2nd thought, this is still a safe default.
|
|
|
e69080e9
|
2012-02-22T10:39:52
|
|
Fan control should be fast enough to adjust now without needing to set a high starting speed.
|
|
|
d1cddf8b
|
2012-02-21T22:23:07
|
|
Update licensing to GPL V3.
|
|
|
02295c69
|
2012-02-19T20:19:47
|
|
Allow devices that are disabled due to overheating to be flagged as recovering instead of disabling them and re-enable them if they're below ideal
temperatures and --no-restart has not been set.
|
|
|
810ad045
|
2012-02-18T23:16:08
|
|
More copyright updates.
|
|
|
be9db9ce
|
2012-02-18T23:00:21
|
|
Copyright updates.
|
|
|
fa4ce8da
|
2012-02-18T22:29:12
|
|
Keep track of intended engine clock speed and only adjust up if it's higher than the last intended speed. This avoids setting the clock speed to one
relative to a lower profile one by mistake.
|
|
|
d1cf80a5
|
2012-02-18T19:49:52
|
|
Use gpu-memdiff on startup if an engine clockspeed is set and a memdiff value is set.
|
|
|
66ea9304
|
2012-02-18T19:43:23
|
|
Revert "Adjust engine speed up according to performance level engine setting, not the current engine speed."
This reverts commit 68217ef6eed95f37da9024f96d098a3114e75c75.
This did not have the desired effect and only added complexity.
|
|
|
c4270974
|
2012-02-18T19:43:17
|
|
Revert "Logic fail on engine multiplier."
This reverts commit b0787e07c88cc5ae9a5a23bbcc004e180e4a24a5.
2nd of 3.
|
|
|
eb5dcc60
|
2012-02-18T19:42:56
|
|
Revert "Correct yet more logic fail :("
This reverts commit 83b76da2c659bbff8d17236ef1b3e69a0ce6228a.
First of 3.
|
|
|
83b76da2
|
2012-02-13T10:53:03
|
|
Correct yet more logic fail :(
|
|
|
b0787e07
|
2012-02-13T10:47:05
|
|
Logic fail on engine multiplier.
|
|
|
68217ef6
|
2012-02-13T10:37:35
|
|
Adjust engine speed up according to performance level engine setting, not the current engine speed.
|
|
|
07c2ee53
|
2012-02-12T17:00:44
|
|
Put win32 equivalents of nanosleep and sleep into compat.h fixing sleep() for adl.c.
|
|
|
405a2120
|
2012-02-11T20:11:18
|
|
Remove unnecessary check for opt_debug on every invocation of applog at LOG_DEBUG and place the check in applog().
|
|
|
2b61d973
|
2012-02-11T19:54:15
|
|
Remove the test for whether the device is on the highest profil level before raising the GPU speed as it is ineffectual and may prevent raising the GPU
speed.
|
|
|
543265d6
|
2012-01-24T14:34:17
|
|
Generalize --temp-cutoff and implement support for reading temperature from BitFORCE FPGAs
|
|
|
c72a8b8c
|
2012-02-05T22:41:37
|
|
Silence ADL warnings.
|
|
|
23685aa4
|
2012-02-05T17:28:53
|
|
Continue auto-management of fan and engine speeds even if a device is disabled for safety reasons.
|
|
|
f8fed37e
|
2012-02-05T17:24:26
|
|
No need to check we're highest performance level when throttling GPU engine speed.
|
|
|
af5aaece
|
2012-01-30T21:15:47
|
|
Revert "Pass the correct GPU from the menu to the adl code."
This reverts commit 7bcda9a28fcaff801ed9ee9e0b6613cbdb3be646.
Corrected for virtual device twice by mistake.
|
|
|
94059c06
|
2012-01-30T21:07:16
|
|
Ensure all virtual_gpu entries are set when the number of ADL devices does not match the number of OpenCL devices.
|
|
|
c9404f4d
|
2012-01-30T15:33:55
|
|
Make sure to set virtual adapters if --dev-reorder is not enabled or device numbers don't match.
|
|
|
5a14ec53
|
2012-01-30T15:21:14
|
|
Add a --dev-reorder option to only reorder devices according to PCI Bus ID when requested.
|
|
|
7bcda9a2
|
2012-01-30T12:42:43
|
|
Pass the correct GPU from the menu to the adl code.
|
|
|
a73156ac
|
2012-01-30T10:02:51
|
|
Display GPU number and device name when ADL is successfully enabled on it.
|
|
|
176bbcbc
|
2012-01-30T09:44:19
|
|
Display GPU ordering remapping in verbose mode.
|
|
|
89196038
|
2012-01-30T09:15:20
|
|
Don't fail in the case the number of ADL and OpenCL devices do not match, and do not attempt to reorder devices unless they match.
Instead give a warning about the likely cause and the potential consequence of it - Hardware monitoring may NOT match up with devices.
|
|
|
f0746f0b
|
2012-01-30T08:18:50
|
|
Display error codes should ADL not return ADL_OK in the more critical function calls.
|
|
|
cdcaaba6
|
2012-01-30T08:06:23
|
|
Revert "Add ADL_Overdrive5_ThermalDevices_Enum interface."
This reverts commit 1e1519e93ec6a3de432dd0b34504675f037c3542.
|
|
|
430a1954
|
2012-01-30T08:06:00
|
|
Revert "Read off lpThermalControllerInfo from each ADL device."
This reverts commit 2d29cdb6117be29ff6353d94a6be0784a588fdb6.
|
|
|
4ae0aad1
|
2012-01-30T08:05:36
|
|
Revert "Set iSize for thermal device enum first."
This reverts commit 990bb4a994261fb0aca8a6bd1b324a3007583207.
Thermal devices is not used. 1st of 3 reverts.
|
|
|
82af288e
|
2012-01-29T22:57:29
|
|
Revert "Fix various harmless warnings."
This reverts commit a4b67f030fc0c7e2b18e79114a441c1e1617d5f8.
|
|
|
a4b67f03
|
2012-01-29T21:06:17
|
|
Fix various harmless warnings.
|
|
|
a8e46a07
|
2012-01-29T20:47:08
|
|
Add extensive ADL based device info in debug mode.
|
|
|
83a83676
|
2012-01-29T13:49:08
|
|
Linux's ADL uses a busnumber in descending order for devices so enumerate them in the opposite order to windows.
|
|
|
4bf01f01
|
2012-01-28T12:08:55
|
|
Fix potential overflow.
|
|
|
05970127
|
2012-01-28T11:26:56
|
|
Carry virtual gpu number across.
|
|
|
3bc05834
|
2012-01-28T11:19:28
|
|
Iterate and change virtual device order instead of shuffling ram.
|
|
|
371e5f68
|
2012-01-28T09:22:33
|
|
Reorder displayed devices to map to physical locations and initialise according to logical location instead.
|
|
|
5a0b4f62
|
2012-01-28T01:56:12
|
|
Map GPU devices to virtual devices in their true physical order based on BusNumber.
|
|
|
06fd9c4a
|
2012-01-26T23:27:10
|
|
Detect dual GPU cards by iterating through all GPUs, finding ones without fanspeed and matching twins with fanspeed one bus ID apart.
|
|
|
487327f8
|
2012-01-26T14:06:31
|
|
Remove compile warning
|
|
|
4995b7c2
|
2012-01-25T16:34:39
|
|
On dual GPUs, only autotune the shared fan once per gpu autotune cycle.
|
|
|
c009c6cd
|
2012-01-25T16:16:28
|
|
Don't try to explicitly drift to exactly the target temperature, aim for just below it.
|
|
|
312724ce
|
2012-01-25T15:48:28
|
|
Adjust fan speed gently while in the optimal range when temperature is drifting to minimise overshoot in either direction.
|
|
|
9549dacf
|
2012-01-25T01:19:58
|
|
Detect dual GPU cards via the indirect information of - 1st card has a fan controller. 2nd card does not have a fan controller, cards share the same
device name, and are one bus ID apart. Use this information to create paired devices, displaying the fan speed on both devices and using the hottest
temperature from either GPU to control the overall fanspeed.
|
|
|
990bb4a9
|
2012-01-23T10:54:21
|
|
Set iSize for thermal device enum first.
|
|
|
2d29cdb6
|
2012-01-23T09:25:53
|
|
Read off lpThermalControllerInfo from each ADL device.
|
|
|
1e1519e9
|
2012-01-23T09:20:21
|
|
Add ADL_Overdrive5_ThermalDevices_Enum interface.
|
|
|
ec2c0b78
|
2012-01-22T18:24:55
|
|
Add API commands: config, switchpool, gpu settings, save
|
|
|
845961af
|
2012-01-05T19:26:01
|
|
Refactor to abstract device-specific code
|
|
|
400cb21d
|
2011-12-24T08:06:53
|
|
Off by one error in performance level.
|
|
|
f4d657ee
|
2011-12-24T07:35:42
|
|
Only adjust gpu engine speed in autotune mode if the gpu is currently at the performance level of that being adjusted.
|
|
|
8c63061e
|
2011-10-23T20:50:52
|
|
Allow a fixed speed difference between memory and GPU clock speed that will change memory speed when GPU speed is changed in autotune mode.
|
|
|
5976f6b3
|
2011-10-14T21:51:55
|
|
Get rid of unused variable.
|
|
|
0ae3f718
|
2011-09-23T10:45:43
|
|
Check last temperature we reached and don't change fan speed if it's already correcting.
|
|
|
b8ea0dd1
|
2011-09-17T13:23:58
|
|
Update curses logging to allow LOG_WARNING and LOG_ERR messages to still go through while within the menu, and drop share message to LOG_NOTICE.
|
|
|
5a24c282
|
2011-09-16T16:46:14
|
|
Try to set temperature regardless of whether get fanspeed fails. This may need to be reverted if it causes problems.
|
|
|
12e99c83
|
2011-09-16T16:42:11
|
|
Initialise all the iSizes of the ADL structures for completeness.
|
|
|
07c21bcb
|
2011-09-16T10:40:58
|
|
Don't forget to set the actual fanspeed too!
|
|
|
3c38adc9
|
2011-09-16T10:27:36
|
|
Only set the speed once, but set it only if fanspeed get says the card is ok and ready.
|
|
|
67fe6ab7
|
2011-09-16T10:26:25
|
|
Don't both with adapter speed set as it has no effect on mining speed.
|
|
|
92e1ffd3
|
2011-09-16T08:31:27
|
|
Store the targetfan even if the later getfanspeed fails in case it's temporary.
|
|
|
8feb661d
|
2011-09-15T20:46:39
|
|
Set the fanspeed in coarse rounded up values and then ever finer grained values in case the card does not support fine values.
|
|
|
3f10e80a
|
2011-09-15T12:18:30
|
|
If the user defined flag is not set on fanspeed, set the fanspeed with it first.
|
|
|
87ec3f47
|
2011-09-15T11:21:54
|
|
Convert fanspeed management to default on exit.
|
|
|
918ec7b0
|
2011-09-14T23:01:07
|
|
Enable adl earlier to allow values to be set in init_adl or they're silently ignored!
|
|
|
1db6ab0b
|
2011-09-14T22:18:49
|
|
Set targetfan when fanspeed is set on parameters.
|
|
|
2e09eee7
|
2011-09-14T21:45:04
|
|
Use the gpu_fan set value as the starting fan speed.
Don't try and change the value if get() doesn't match as it's unreliable, just save the reentrant value.
Limit fanspeeds to reported iMax and iMin.
|
|
|
88eb514c
|
2011-09-11T11:57:08
|
|
Only display supported values from fanspeed on change settings.
|