|
d2e6648c
|
2014-01-29T22:21:55
|
|
Add support for AntminerU1 devices with the icarus driver.
|
|
|
4cde0676
|
2014-01-29T20:54:24
|
|
Do away with usb resets entirely since we retry on both pipe and io errors now and they're of dubious value.
|
|
|
56f9795a
|
2014-01-29T20:09:14
|
|
Retry on usb IO errors instead of faking success.
|
|
|
6ab7b2b3
|
2014-01-29T10:50:22
|
|
Check that we've cleared the pipe error after a clear request, not the err value which is unchanged.
|
|
|
e2a10dfe
|
2014-01-25T00:17:45
|
|
Do not send a usb reset on a usb read pipe error.
|
|
|
d551eba0
|
2014-01-25T00:16:15
|
|
Don't replace usb pipe errors with the pipe reset return code.
|
|
d9440866
|
2014-01-18T09:36:51
|
|
Modify thread naming to make them easier to identify
|
|
|
87f02131
|
2014-01-11T16:22:30
|
|
Check for loss of device in usb read before any other code on the usbdev
|
|
|
61bee221
|
2014-01-08T22:28:00
|
|
Fill the appropriate type of usb transfer when we know if it's an interrupt transfer instead of a bulk one.
|
|
|
ad6afa39
|
2014-01-08T22:18:02
|
|
Use the internal knowledge of the usb epinfo to determine whether we should be doing an interrupt instead of a bulk transfer, and do not send a ZLP if so, and limit read transfer to expected size automatically.
|
|
|
c644b749
|
2014-01-05T20:13:02
|
|
Provide a way for usb reads to just read the size asked for with a limit bool.
|
|
|
0615cc8c
|
2014-01-03T16:47:51
|
|
Don't return an error in usb read if we've managed to get the whole read length we've asked for.
|
|
|
d66ebfee
|
2014-01-03T16:46:07
|
|
Use correct endpoint order for nanofury devices and read with a short timeout on return loop from send_recv.
|
|
|
b849a1b9
|
2014-01-02T22:25:56
|
|
Add basic device detection and updated udev rules for nanofury devices.
|
|
|
1b7737d8
|
2013-12-24T08:34:56
|
|
Fix BXF being inappropriately dependent on drillbit.
|
|
|
97a13df4
|
2013-12-23T06:58:26
|
|
Merge remote-tracking branch 'drill/master' into drill
|
|
|
afe77108
|
2013-12-21T08:28:23
|
|
Change default hashfast timeout to 500ms.
|
|
85aebc41
|
2013-12-11T19:29:10
|
|
Merge remote-tracking branch 'upstream/master' into merge_385
|
|
|
daf2c9b9
|
2013-12-10T06:39:21
|
|
Only set LIBUSB_TRANSFER_ADD_ZERO_PACKET for libusb versions we know include support for.
|
|
|
5c411228
|
2013-12-09T15:25:57
|
|
Fix compilation clashes with Drillbit & Bitfury driver, allow both to be compiled in at once
|
|
|
8b09c083
|
2013-12-09T13:46:36
|
|
Attempt USB device resets on usb read/write errors that will normally cause the device to drop out.
|
|
|
73343f38
|
2013-12-09T11:39:03
|
|
Merge remote-tracking branch 'upstream' into merge_upstream
Conflicts:
usbutils.c
|
|
|
138ff949
|
2013-12-08T12:48:06
|
|
Cache the bool value for usb1.1 in _usb_write
|
|
|
7ae878aa
|
2013-12-08T12:44:45
|
|
Initialise usb locks within usbutils.c instead of exporting them.
|
|
|
509d1a78
|
2013-12-08T13:21:57
|
|
Imitate a transaction translator for all usb1.1 device writes to compensate for variable quality hubs and operating system support.
|
|
|
b209d9f6
|
2013-12-08T12:48:06
|
|
Cache the bool value for usb1.1 in _usb_write
|
|
|
d7c5667a
|
2013-12-08T12:44:45
|
|
Initialise usb locks within usbutils.c instead of exporting them.
|
|
|
3737d62a
|
2013-12-08T12:37:25
|
|
Rationalise variables passed to usb_bulk_transfer.
|
|
|
a3ed7abc
|
2013-12-07T14:56:39
|
|
Unlink files opened as semaphores on releasing them.
|
|
|
20997344
|
2013-12-03T18:56:54
|
|
Fix bug with drillbit devices not numbering correctly
|
|
|
9bcd5ca8
|
2013-12-02T17:20:02
|
|
Having changed C_MAX means we don't calloc enough for usb stats, off by one.
|
|
|
0da9c87e
|
2013-12-01T15:18:16
|
|
Deprecate the usb usecps function and just split up transfers equal to the maxpacketsize on usb1.1 devices.
|
|
|
f3afbe61
|
2013-12-01T14:19:46
|
|
Retry sending after successfully clearing a pipe error.
|
|
|
1b18e3cd
|
2013-12-01T14:10:57
|
|
Drop logging of timeout overrun message to verbose level.
|
|
|
ab7580cc
|
2013-12-01T00:07:37
|
|
Use a much longer callback timeout for USB writes on windows only as a last resort since cancellations work so poorly.
|
|
|
b68124b0
|
2013-12-02T17:20:02
|
|
Having changed C_MAX means we don't calloc enough for usb stats, off by one.
|
|
|
3bc36eb0
|
2013-12-01T15:18:16
|
|
Deprecate the usb usecps function and just split up transfers equal to the maxpacketsize on usb1.1 devices.
|
|
|
596e95b0
|
2013-12-01T14:19:46
|
|
Retry sending after successfully clearing a pipe error.
|
|
|
9a6ce20e
|
2013-12-01T14:10:57
|
|
Drop logging of timeout overrun message to verbose level.
|
|
|
423dd457
|
2013-12-01T00:07:37
|
|
Use a much longer callback timeout for USB writes on windows only as a last resort since cancellations work so poorly.
|
|
|
e933a560
|
2013-11-30T22:03:26
|
|
Merge remote-tracking branch 'upstream' into merge_383
Conflicts:
usbutils.c
usbutils.h
|
|
|
0aede509
|
2013-11-30T12:32:34
|
|
Revert "Disable USB stats which were not meant to be enabled by default and add extra memory for a memory error when stats are enabled."
This reverts commit 693d3916448ddc66f3a109c5e065e99aa8fa9669.
|
|
|
6a91027f
|
2013-11-30T10:14:44
|
|
Use sync usb transfers in lowmem mode.
|
|
|
be1d7a90
|
2013-11-30T08:52:42
|
|
Go back to allowing timeout errors on USB writes to be passed back to the driver without removing the device in case the driver wishes to manage them.
|
|
|
7ddb94d6
|
2013-11-25T23:47:43
|
|
A USB control error must be < 0
|
|
|
d2b7ccbf
|
2013-11-25T23:13:29
|
|
Simplify USB NODEV error checking to success only for writes and control transfers, and success and timeout for reads.
|
|
|
999d27ed
|
2013-11-25T23:05:41
|
|
libusb error IO should be fatal as well if it gets through usb read and write.
|
|
|
751585c6
|
2013-11-25T23:01:33
|
|
Allow IO errors in usb reads/writes to be ignored up to retry max times.
|
|
|
04fab9bf
|
2013-11-24T09:39:44
|
|
Relax the timeouts for the slower usb devices on linux.
|
|
|
0e60ca30
|
2013-11-22T23:21:44
|
|
Make usb_detect return the cgpu associated with it to check if it succeeds to decide on whether to increment the device count or not.
|
|
|
9ce30b7b
|
2013-11-22T11:14:21
|
|
Zero the read buffer in _usb_read to avoid stale data and only use stack memory instead of using the bulkbuf since it is only used in _usb_read.
|
|
|
23aff60d
|
2013-11-22T10:34:30
|
|
Change the processed value not the bufsiz in response to an end of message marker.
|
|
|
49ae610b
|
2013-11-22T10:24:35
|
|
Don't lose data beyond the end of message in a usb read.
|
|
|
4cb51674
|
2013-11-22T09:58:30
|
|
Only check strlen on end if end exists.
|
|
|
b8d8ebfa
|
2013-11-22T09:54:58
|
|
Simplify the end of message detection in _usb_read and allow it to return without doing another read if the message is already in the buffer.
|
|
|
fd2b247a
|
2013-11-18T10:38:05
|
|
There is no need to limit usb write transfers to maxpacketsize and it's harmful for large transfers on slow devices such as wrt routers.
|
|
|
693d3916
|
2013-11-17T23:04:29
|
|
Disable USB stats which were not meant to be enabled by default and add extra memory for a memory error when stats are enabled.
|
|
|
b3b32675
|
2013-11-17T17:09:29
|
|
Set limit and count to integers to not overflow during failed hotplug attempts and then not trying again.
|
|
|
c29d6014
|
2013-11-16T14:46:49
|
|
Add more information on libusb failure to init telling users to check README file.
|
|
|
f785ae5d
|
2013-11-15T17:34:06
|
|
Add bxf details to usbutils.
|
|
|
998a368f
|
2013-11-15T09:41:01
|
|
Merge remote-tracking branch 'upstream' into new_protocol
Conflicts:
cgminer.c
configure.ac
miner.h
|
|
|
488b2ba5
|
2013-11-14T21:25:52
|
|
Merge branch 'master' into bxf
|
|
|
67c3826b
|
2013-11-14T10:37:23
|
|
Uniquely identify the BF1 and BXF bitfury devices.
|
|
|
afb710f3
|
2013-11-14T00:58:21
|
|
Use our new zero length packet support directly in windows.
|
|
|
eac185e8
|
2013-11-11T13:21:41
|
|
Klondike support I2C USB layout also - as KLI
|
|
|
b74af263
|
2013-11-12T07:40:35
|
|
Only limit packetsize on usb out writes.
|
|
|
b99971f4
|
2013-11-11T13:21:41
|
|
Klondike support I2C USB layout also - as KLI
|
|
|
8467d448
|
2013-11-11T07:11:06
|
|
Revert "Send a zero length packet at the end of every usb transfer on windows in case libusb internally has batched them into one maxpacket sized."
This reverts commit 4e7b7f6f1802df2cd78c84bb93ff64acf51ca075.
|
|
|
4e7b7f6f
|
2013-11-10T17:49:49
|
|
Send a zero length packet at the end of every usb transfer on windows in case libusb internally has batched them into one maxpacket sized.
|
|
|
278f157e
|
2013-11-10T09:12:39
|
|
Merge remote-tracking branch 'upstream/master' into new_protocol
|
|
|
9f74e057
|
2013-11-09T08:23:23
|
|
Use libusb's own zero length packet support unless we have to emulate it on windows since only libusb knows for sure if it's needed.
|
|
|
8e5dc21e
|
2013-11-09T01:46:50
|
|
Send zero length packets when terminating a usb write aligned to maxpacketsize.
|
|
|
652044d9
|
2013-11-06T10:01:15
|
|
Check length before submitting sync transfers
|
|
|
b1be5c6d
|
2013-11-05T19:18:20
|
|
Different windows+usb combinations respond with varying levels of reliability wrt timeouts so use a nominal extra 40ms before cancelling transfers that fail to time out on their own.
|
|
|
21f18956
|
2013-11-05T19:11:20
|
|
Revert "Use no cancel transfer functions on windows in callback_wait"
This reverts commit 8f6acad8ec11fa68e31447e4de9e2ce49c2bf16a.
|
|
|
6bc691ad
|
2013-11-05T15:55:19
|
|
Treat usb write timeout errors as unrecoverable.
|
|
|
42b3cf19
|
2013-11-05T15:46:07
|
|
Transfer errors are filtered out in usbutils now so no need to look for them in NODEV checks.
|
|
|
e692cd08
|
2013-11-05T13:55:06
|
|
Do not double up with checking for end of timeout measurements in usb read/write.
|
|
|
8f6acad8
|
2013-11-04T12:01:58
|
|
Use no cancel transfer functions on windows in callback_wait
|
|
|
f066ca68
|
2013-11-05T10:19:11
|
|
Merge branch 'master' of github.com:ckolivas/cgminer into new_protocol
Conflicts:
configure.ac
miner.h
usbutils.c
usbutils.h
|
|
|
f4cf0939
|
2013-11-05T08:36:54
|
|
Add a wr_trylock wrapper for pthread rw lock write trylock.
|
|
|
251e1a98
|
2013-11-05T08:20:04
|
|
Give AMU a much longer timeout on windows than other icarus devices.
|
|
|
8b38d7fe
|
2013-11-04T16:53:03
|
|
Use WRITEIOERR macro check for all usb writes.
|
|
|
8fb7a0d1
|
2013-11-04T08:45:09
|
|
Always use a usb read buffer instead of having to explicitly enable it.
|
|
|
310aa754
|
2013-11-03T21:59:34
|
|
Discriminate between libusb transfer errors and regular libusb errors and make sure to capture them all.
|
|
|
d1683fe6
|
2013-11-03T21:01:50
|
|
Always read a full sized transfer for bulk reads.
|
|
|
fc80e2fe
|
2013-11-03T20:31:04
|
|
Deprecate preferred packet size functions in usbutils since they're unhelpful.
|
|
|
ea122100
|
2013-11-03T20:24:34
|
|
Why are we reading extra again in usb read when buffering is enabled? Don't do that.
|
|
|
38d9c24e
|
2013-11-03T20:16:45
|
|
Copy known transferred amount back to buffer for usb reads instead of requested length.
|
|
|
b5dfb8f0
|
2013-11-03T20:15:41
|
|
Ignore preferred packet size.
|
|
|
0cceaccf
|
2013-11-03T19:49:00
|
|
Treat timeout errors on usb writes as IO errors.
|
|
|
dfba30b9
|
2013-11-03T19:41:56
|
|
Ignore iManufacturer from bitfury devices to support bluefury as well as redfury.
|
|
|
95797821
|
2013-11-03T19:15:32
|
|
Add more debugging info for when usb details don't match.
|
|
|
73f6a570
|
2013-11-03T09:25:28
|
|
Look for timeout overruns in usb read/write.
|
|
|
ccb74239
|
2013-11-03T09:23:45
|
|
Use an int for usb_read/write to identify overruns.
|
|
|
1f227462
|
2013-11-03T09:04:15
|
|
Use the callback timeout as a safety mechanism only on windows.
|
|
|
4c0b6438
|
2013-11-02T12:29:08
|
|
Instead of using complicated sleeps to emulate characters per second on usb writes, submit only as many characters as can be transferred per usb poll of 1ms, and use timeouts in bulk transfers, cancelling transfers only as a failsafe.
|
|
|
efc605ff
|
2013-11-03T19:41:56
|
|
Ignore iManufacturer from bitfury devices to support bluefury as well as redfury.
|
|
|
ef0b7d3b
|
2013-11-03T19:15:32
|
|
Add more debugging info for when usb details don't match.
|
|
|
5c9f3036
|
2013-10-29T22:25:05
|
|
Merge branch 'master' into hashfast
|